763 Commits

Author	SHA1	Message	Date
Thomas Göttgens	973b453d43	Update RAK2560 code (#5844) ... * * Update RAK9154 sensor to tx remote power telemetry * remove uf2 script, pio run does that inline * move sensor module to correct position * disable LED and Accelerometer code on rak2560 * trunk fmt * mention epaper variant * attention, revert, revert * Enable Environment Telemetry of these values * fix float values	2025-01-20 09:34:54 +01:00
SignalMedic	8179e61fdc	changed GPS buad rate to 9600 (#5786) ... Co-authored-by: Huston Hedinger <1875033+hdngr@users.noreply.github.com>	2025-01-16 17:26:02 -06:00
Tom Fifield	fd60c9b3be	Upgrade to LovyanGFX 1.2 (#5677) ... * [WIP] Attempt upgrade to LovyanGFX 1.1.16 This is the version most used by the TFT branch. I wonder if this will work with our existing code? :) * Update Portduino to LovyanGFX 1.20.0 Manuel says it's good to go. * Update unPhone platformio.ini --------- Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>	2025-01-12 15:16:26 +08:00
Eric Severance	0fe8d4ccc7	Run the AddressSanitizer during tests (#5815) ... * Run the AddressSanitizer during tests * Show details for test failures	2025-01-12 13:51:43 +08:00
DarkZeros	00fdf2c9aa	Heltec Wireless Stick Lite V1/V2 support (#5808) ... * I only have the V2.1 version, not sure if the HW is same with V1, or V2. Given the few resources I could find I think it is. * ADC / Battery measure and TX/RX are working	2025-01-12 13:17:40 +08:00
GUVWAF	6b8cf164e9	Save some flash usage on STM32WL (#5819)	2025-01-11 07:20:32 -06:00
Tom Fifield	077ee02426	Cherry-pick: Meshtab streamline and rotation fixes (#5812) ... * mesh-tab: streamline target definitions * mesh-tab: fix touch rotation 4.0 inch display * Mesh-Tab platformio: 4.0inch: increase SPI frequency to max * mesh-tab: fix rotation for 3.5 IPS capacitive display * mesh-tab: fix rotation for 3.2 IPS capacitive display --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-01-11 05:52:28 -06:00
Thomas Göttgens	25a5f178e1	remove ethernet code from this variant, remove unused radio chip code (#5810) ... * remove ethernet code from this variant, remove unused radio chip code * remove ethernet lib too, pin onewire library to release hash	2025-01-11 10:43:48 +08:00
Bernd Giesecke	2e44de262e	Add GPS capability to RAK2560 (RAKwireless WisMesh Hub) (#5797) ... * Add GPS to RAK2560 * Add GPS to RAK2560	2025-01-09 19:20:38 -06:00
Tom Fifield	e1aaafb77a	Cherrypick "add more locking for shared SPI devices (#5595) " (#5728) ... * add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * mesh-tab: lower I2C touch frequency --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>	2025-01-03 10:05:26 +08:00
Tom Fifield	fdcc0e12aa	Minor TFT branch synch (#5706)	2024-12-31 10:15:01 -06:00
Bernd Giesecke	9af8c58c40	Add Ethernet RAK13800 support to RAK11310 (#5707)	2024-12-31 13:36:49 +01:00
Thomas Göttgens	a2a6b236b7	support indicator sensors through Rp2040 serial (#5696) ... * support indicator sensors through Rp2040 serial * disable excessive debug printing	2024-12-30 21:28:31 +01:00
Tom Fifield	3c7053c66a	reference seeed indicator fix commit arduino-esp32 (#5692) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-12-29 15:23:46 +11:00
Tom Fifield	43d6b31603	TFT branch grab-bag (#5683) ... Selection of minor edits from the TFT branch that are too challenging to cherry-pick cleanly, including: * introducing the HAS_TFT flag * fixing pins in unphone * Adding pinterdevice to portduino settings	2024-12-28 08:31:54 -06:00
Ben Meadors	31a5b9c122	Cleanup and exclude external sensor macro to make T1000-E binaries much smaller	2024-12-28 08:30:53 -06:00
Tom Fifield	26a4d6c87a	Cherry-pick: Mesh-tab (#5674) ... * mesh-tab targets * update meshtab voltage divider * fix DIO1 wakeup * update mesh-tab tft configs * update mesh-tab ini * rotation fix; added ST7789 3.2" display * mesh-tab touch updates * mesh-tab: enable alert message menu * mesh-tab rotation upside-down * use MESH_TAB hardware model definition * use board definition for mesh-tab --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-12-27 05:13:45 -06:00
Tom Fifield	ed39d14c85	Remove remaining \n from log lines. (#5675)	2024-12-27 18:01:02 +11:00
Eric Severance	1281da627e	Generate a coverage report for End to end tests (#5667) ... * Generate coverage report after running tests * Wait for integration program to stop/start	2024-12-25 19:47:03 -06:00
Thomas Göttgens	57af51cc18	fix typo in nugget radio def	2024-12-24 09:04:57 +01:00
GUVWAF	f4cff33450	Portduino: specify C++ version and add link pthread (#5642)	2024-12-21 11:13:03 -06:00
Thomas Göttgens	8e6ef4ea04	add nugget and nibble boards for 38c3 (#5609) ... * add nugget and nibble boards for 38c3 * mark those boards extra for now	2024-12-21 14:57:01 +01:00
Tom	4edeca5f84	Added support for the LR1121 radio to the NRF52 Pro-Micro (#5515) ... * Added support for the LR1121 radio Added support for the LR1121 radio, tested as functional with an E80-900M2213S from CDEbyte. * Swap PNG for PDF * remove PNG * put TCXO voltage to 1.8, as in example file It worked at 1.6v, but ¯\_(ツ)_/¯ * Hopefully this will appease Trunk * Update rf switch pins and Schematic --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-12-17 10:25:37 -06:00
Tom Fifield	020e9102a8	Define BUTTON_PIN as -1 for RP2040-lora (#5574) ... The previous approach of undef'ing meant that it was impossible for users to change the button pin in the apps. Fixes https://github.com/meshtastic/firmware/issues/5566	2024-12-15 07:14:48 -06:00
Austin	6d8be13266	Portduino-buildroot: Remove pkg-config optional libs (#5573)	2024-12-14 19:19:19 -06:00
Thomas Göttgens	332dbaf573	Support TLORA_V3.0 (#5563) ... - Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector. - 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these! - update trunk to latest version	2024-12-14 10:59:15 +01:00
Austin	761a99d241	portduino-buildroot: Define c standard (#5547)	2024-12-10 18:09:54 +02:00
Austin	cf46e675ca	Add portduino-buildroot variant (#5540) ... * Add portduino-buildroot variant * Update platform-native for platform-buildroot	2024-12-10 17:14:52 +02:00
Andrew Yong	3ae85e2c82	tlora_v2_1_16: Unset BUTTON_PIN and BUTTON_NEED_PULLUP (#5535) ... Unset BUTTON_PIN and BUTTON_NEED_PULLUP as the board ships without a user button. Devices and users expecting a button on GPIO12 have to set [GPIO for user button](https://meshtastic.org/docs/configuration/radio/device/#gpio-for-user-button) to 12 (or any GPIO pin the momentary switch was connected to) to restore functionality. Signed-off-by: Andrew Yong <me@ndoo.sg>	2024-12-09 05:38:51 -06:00
Matthias Granberry	59ed5c9049	Configure Seeed Xiao S3 RX enable pin (#5517)	2024-12-08 07:32:49 +11:00
Ben Meadors	b99e57a6fa	Add popular nrf52 pro micro to the builds (#5523)	2024-12-07 07:03:58 -06:00
Ben Meadors	46eab20a90	Lets try this again minus device ui	2024-12-07 05:30:59 -06:00
Ben Meadors	39b5fb041e	Revert "Add heltec capsule back" ... This reverts commit fc16d93421.	2024-12-07 05:29:13 -06:00
Ben Meadors	fc16d93421	Add heltec capsule back	2024-12-06 20:01:47 -06:00
dylanli	85b2bad275	Refact the macro definition of GPS initialization of GPSDEFAULTD_NOT_PRESENT and added seeeed Indicator to this sequence (#5494) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-12-03 06:29:33 -06:00
dylanli	594af0cacd	Update xiao_esp32 fully support L67K (#5488) ... L67K module hardware changed	2024-12-02 10:59:34 +02:00
Ben Meadors	d5af8f0a97	Revert "Seems like the last DIY board that's not "extra" (#5420)" (#5446) ... This reverts commit e6fb6b115a.	2024-11-26 11:09:55 +08:00
Ben Meadors	6018c0a830	Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (#5436) ... Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-25 05:14:48 -06:00
Ben Meadors	f2ee0df015	Remove BMA-423 and STK8X by default (#5429) ... * Remove BMA-423 by default * STK * Wrong macro * Helps if you include the file	2024-11-23 17:18:22 -06:00
dylanli	c51a7b98bd	add canned message and keyboard in indicator board (#5410) ... * add canned message and keyboard in indicator board * Added virtual keyboard macro and enabled for Indicator * Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-22 18:54:06 -06:00
Ben Meadors	fdec95f9c1	Cherry pick tdeck fixes (#5422) ... * Try-fix (workaround) T-Deck audio crash * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * dreamcatcher: assign GPIO44 to audio mclk --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-11-22 14:25:09 -06:00
Jonathan Bennett	e6fb6b115a	Seems like the last DIY board that's not "extra" (#5420)	2024-11-22 05:32:35 -06:00
dylanli	ccfc9e5dd9	add GPS in indicator board (#5411)	2024-11-21 19:14:35 +08:00
Ben Meadors	485c371de4	Create a specific hw_model for WisMesh Tap (#5400) ... * Create a specific hw_model for WisMesh Tap * Trunk * HAS_ETHERNET * Remove it altogether * Don't need these either	2024-11-20 12:57:46 +08:00
Daniel.Cao	df1f66a6b9	Anable trace route function on wismeshtap platform (#5389)	2024-11-19 05:42:29 -06:00
GUVWAF	9545a10361	RP2040: Update core; add mDNS support (#5355) ... * Update arduino-pico core * RP2040: Add mDNS support * SimpleMDNS `begin` now returns a bool * Add `-g` option to `debug_build_flags` to link files for gdb * RAK11310 needs old platform as well * Change defines to specific architecture * Core version 4.2.1 is out	2024-11-16 08:20:20 +08:00
Ben Meadors	e65a754430	Remove board level extra from wismesh tap	2024-11-12 06:20:42 -06:00
Daniel.Cao	ff33a27789	Reduce the flash usage of wismeshtap platform (#5322) ... * Reduce the flash usage of wismeshtap platform * fix STOREFORWARD twice * Reduce the flash usage of wismeshtap platform * fix STOREFORWARD twice * add range test * Update platformio.ini remove -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1 -DMESHTASTIC_EXCLUDE_AUDIO=1 * Update platformio.ini --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-12 06:16:40 -06:00
Daniel.Cao	6eba2789d0	rak10701 (rak wismeshtap) optimization (#5280) ... * Improve the processing speed of virtual keyboards * Remove the disable GPS feature, as it would interfere with the normal use of TFT * Changed the default screen sleep time to 30s * Rename platform rak10701 -> rak wismeshtap * Fixed rak wismeshtap turned off gps caused the screen not to display * Reduce the size of the flash, otherwise uf2 will not work Co-authored-by: Daniel Cao <daniel.cao@rakwireless.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-11 13:37:43 +01:00
Ben Meadors	667b4ef0f2	Exclude some niche modules by default and populate exclude_modules (#5300) ... * Exclude some niche modules by default * Start of intelligently excluding modules --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-10 13:36:49 -06:00