132 Commits

Author	SHA1	Message	Date
MagnusKos	2e96bf642c	nRF52 pre-sleep main serial check ... Added another usage check for the main Serial. It could save some nerves in case the port is not in use by any means. Applied trunk fmt to the file.	2025-07-23 20:05:29 +03:00
MagnusKos	18022ed535	Pro-Micro button SENSE signal ... Added SENSE signal on the user button. It is explicitly enabled now for this platform.	2025-07-21 18:50:10 +03:00
MagnusKos	61e60c974d	Clear GPREGRET before setting ... There are some troubles with that register: it is recommended to clear it with 0xFF mask and only after that perform a setting.	2025-07-21 18:40:24 +03:00
MagnusKos	43a1976f6d	Pro-Micro DeepSleep Quick Fix ... It is noticed that some nRF52840 boards (pro-micro in particular) stopped waking up from the deep sleep state (shutdown state) with a press of a button. The problem is in a Serial1.end() call.	2025-07-21 18:14:50 +03:00
Thomas Göttgens	b851b15a73	fix UDP builds on nRF (#7394) ... * fix UDP builds on nRF * fix rp2040 too	2025-07-20 23:13:50 +02:00
Thomas Göttgens	a9c9b96eb6	UDP for RAK4631 Eth Gw and the t-eth-elite. Solves #7149 (#7385) ... * UDP for RAK4631 Eth Gw and the t-eth-elite. Also enable IP output on Portduino. Solves #7149 * Copilot suggestion Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix portduino build * initialize local port --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-20 06:22:00 -05:00
Ben Meadors	39716ed1ba	Fix L1 EInk HWModel (#7346)	2025-07-14 21:14:07 -05:00
Daniel.Cao	e864fcf9a8	feat: add support for RAK Wismesh Tag hardware platform (#6853) ... * add new platform rak_wismeshtag * Remove RTC and Ethernet definitions from variant.h * Remove unused EINK and Ethernet definitions from variant.h and platformio.ini * Add WISMESH_TAG hardware model definition in architecture.h and update build flags in platformio.ini * Remove unused build flags and dependencies --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: daniel <daniel.cao@rakwireless.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2025-07-14 16:29:42 +02:00
Ben Meadors	2b97576b18	NRF52 BLE fixes / tweaks (#7152) ... * Try-fix: Flaky NRF52 bluetooth pairing for some users * Safe access for screen pointer	2025-06-27 06:26:34 -05:00
Jonathan Bennett	4feaec651f	Unify the native display config between legacy display and MUI (#6838) ... * Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-21 06:36:04 -05:00
Justin E. Mann	2fb46ce5d5	Add rak12035 VB Soil Monitor Tested & Working (#6741) ... * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * Update to 1.0.4 release of RAK12035_SoilMoisture * cleanup * cool * . * .. * little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500 looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500. improvements could be made around the configuration of the monitor. next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity. * . comments about current limitations and TODOs * trunk update * trying to autoformat.. * fix formatting attempt 2 * .. * ... * ... * . * some corrections and local build success * correction in temp code * grr formatting * cleanup after a few experiments * remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos. * update some values in varient for rak wistap * working out trunk formatting.. * wip . corrections to other build variants * . * protobuffs? * protobufs? * Update protobufs ref * Protobufs ref * Trunk * Update RAK12035Sensor.cpp * Fmt * comment changes * dumb mistakes... resolved, actually built and tested.. all good.. * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * . proto submod * proto * proto * merge master * mabe a fix for GPS pin conflict, waiting on a new gps module to try * merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035 * . * . --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-19 18:51:03 -05:00
Csrutil	5d0bf03b01	add support for GAT562 Mesh Trial Tracker (#6984) ... * add support for GAT562 Mesh Trial Tracker * Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER * Added RAK4630 for led pin 2 (blue) * Added RAK4630 for led pin 2 (blue) comment * don't touch src/mesh/NodeDB.cpp * set fixed baudrate for gat562_mesh_trial_tracker * adjust the order of the HW_VENDOR defines --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-06-13 17:27:48 +10:00
Clément Hampaï	1eacdd0629	[Variant] nomadstar meteor pro (#6742) ... * Initial support for NomadStar Meteor Pro * Cleaned up Platformio variant comments * Removed RTC & ETH deps. * Removed RGB NCP5623 deps, Enabled AmbientLight by default * Added HWID mapping * Updated Armduino-Semihosting lib dep with archived version. * Fixed trunk linting in AmbientLightingThread.h and hydra variant	2025-06-10 07:48:52 +10:00
dylanli	c0c2ec195f	add support for seeed wio tracker L1 (#6907) ... * add support for seeed wio tracker l1 * add support in nrf52 arch * fix ADC problem and comments incorrect * fix gps wakeup pin * fix gps pin	2025-05-29 06:33:22 -05:00
todd-herbert	74b3dc34e4	Fix crash when clearing NRF52 BLE bonds (#6609) ... * Fix crash before clearing BLE bonds * Prevent clients re-pairing BLE during factory reset Clients seem able to re-pair BLE after clearing bonds during factory reset, even after advertising disabled. This seems to primarily occur on Android devices, which seem to more actively maintain the BLE connection. As a workaround, `NRF52Bluetooth::shutdown` swaps the BLE pairing callback to one which actively rejects new connections. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-17 17:11:42 -05:00
dylanli	d74359abf0	add support for Seeed solar panel (#6597) ... * add seeed_solar_node * fix RF_SW problem * fix IIC problem * Update Button redefination * Add on-board flash pin defination * fix missing a ',' * update seeed sorlar panel defination * fix word spell * fix upstream change * fix upstream change * fix upstream change * fix formate * Restore the FLASH definition that was deleted by mistake and pull down the CS pin to ensure low power consumption * fix led defination conflict * Delete lib/device-ui directory * Restore protobufs submodule --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-04-17 16:11:17 +10:00
Aaron.Lee	b46aad85cc	Add new hardware: Heltec MeshPocket (#6533) ... * Add Heltec MeshPocket. * MeshPocket source code update * Optimiz code for refresh border during full update. * Update Heltec MeshPocket json file info.	2025-04-15 13:34:30 +10:00
Thomas Göttgens	606abfc116	Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507) ... * Fix several features of M1 and M2 (i know what the 7 is now ...) * 'THe' should be 'The'. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * remove floating definition --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-07 05:46:22 -05:00
Thomas Göttgens	7df327664e	add missing C8H10N4O2	2025-03-29 14:13:01 +01:00
Thomas Göttgens	0491c890d7	recognize M1	2025-03-29 08:26:30 +01:00
Thomas Göttgens	4a12b4eb32	add Thinknode-M1 (#6435) ... * ThinkNode M1 * Update Epaper Driver * Your day isn't complete unless trunk has complained about your formatting at least once.	2025-03-28 21:22:17 +01:00
Marco Veneziano	d7504921fb	Add missing board definition for MESHLINK (#6404) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-28 06:45:04 -05:00
Ben Meadors	c8bd6c32cc	Correct HW_MODEL	2025-03-06 08:43:03 -06:00
Ben Meadors	6c8058e1d8	Update SEEED_XIAO_NRF52840_KIT (#6239)	2025-03-06 09:44:22 +08:00
Ben Meadors	99d3e5eb70	2.6 changes (#5806) ... * 2.6 protos * [create-pull-request] automated change (#5789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Hello world support for UDP broadcasts over the LAN on ESP32 (#5779) * UDP local area network meshing on ESP32 * Logs * Comment * Update UdpMulticastThread.h * Changes * Only use router->send * Make NodeDatabase (and file) independent of DeviceState (#5813) * Make NodeDatabase (and file) independent of DeviceState * 70 * Remove logging statement no longer needed * Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772) * File system persistence fixes * [create-pull-request] automated change (#6000) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update ref * Back to 80 * [create-pull-request] automated change (#6002) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * 2.6 <- Next hop router (#6005) * Initial version of NextHopRouter * Set original hop limit in header flags * Short-circuit to FloodingRouter for broadcasts * If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter * Set last byte to 0xFF if it ended at 0x00 As per an idea of @S5NC * Also update next-hop based on received DM for us * temp * Add 1 retransmission for intermediate hops when using NextHopRouter * Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback * Update protos, store multiple relayers * Remove next-hop update logic from NeighborInfoModule * Fix retransmissions * Improve ACKs for repeated packets and responses * Stop retransmission even if there's not relay node * Revert perhapsRebroadcast() * Remove relayer if we cancel a transmission * Better checking for fallback to flooding * Fix newlines in traceroute print logs * Stop retransmission for original packet * Use relayID * Also when want_ack is set, we should try to retransmit * Fix cppcheck error * Fix 'router' not in scope error * Fix another cppcheck error * Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK Also check for broadcast in `getNextHop()` * Formatting and correct NUM_RETRANSMISSIONS * Update protos * Start retransmissions in NextHopRouter if ReliableRouter didn't do it * Handle repeated/fallback to flooding packets properly First check if it's not still in the TxQueue * Guard against clients setting `next_hop`/`relay_node` * Don't cancel relay if we were the assigned next-hop * Replies (e.g. tapback emoji) are also a valid confirmation of receipt --------- Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> * fix "native" compiler errors/warnings NodeDB.h * fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259) * lib update: light theme * fix merge issue * lib update: home buttons + button try-fix * lib update: icon color fix * lib update: fix instability/crash on notification * update lib: timezone * timezone label * lib update: fix set owner * fix spiLock in RadioLibInterface * add picomputer tft build * picomputer build * fix compiler error std::find() * fix merge * lib update: theme runtime config * lib update: packet logger + T-Deck Plus * lib update: mesh detector * lib update: fix brightness & trackball crash * try-fix less paranoia * sensecap indicator updates * lib update: indicator fix * lib update: statistic & some fixes * lib-update: other T-Deck touch driver * use custom touch driver for Indicator * lower tft task prio * prepare LVGL ST7789 driver * lib update: try-fix audio * Drop received packets from self * Additional decoded packet ignores * Honor flip & color for Heltec T114 and T190 (#4786) * Honor TFT_MESH color if defined for Heltec T114 or T190 * Temporary: point lib_deps at fork of Heltec's ST7789 library For demo only, until ST7789 is merged * Update lib_deps; tidy preprocessor logic * Download debian files after firmware zip * set title for protobufs bump PR (#4792) * set title for version bump PR (#4791) * Enable Dependabot * chore: trunk fmt * fix dependabot syntax (#4795) * fix dependabot syntax * Update dependabot.yml * Update dependabot.yml * Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797) * Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800) * Actions: Semgrep Images have moved from returntocorp to semgrep (#4774) https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved! Official Docker images for Semgrep now available at semgrep/semgrep." Patch updates our CI workflow for these images. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Bump meshtestic from `31ee3d9` to `37245b3` (#4799) Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`. - [Commits](31ee3d90c8...37245b3d61) --- updated-dependencies: - dependency-name: meshtestic dependency-type: direct:production ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * [create-pull-request] automated change (#4789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798) Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4. - [Release notes](https://github.com/pnpm/action-setup/releases) - [Commits](https://github.com/pnpm/action-setup/compare/v2...v4) --- updated-dependencies: - dependency-name: pnpm/action-setup dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Raspberry Pico2 - needs protos * Re-order doDeepSleep (#4802) Make sure PMU sleep takes place before I2C ends * [create-pull-request] automated change * heltec-wireless-bridge requires Proto PR first * feat: trigger class update when protobufs are changed * meshtastic/ is a test suite; protobufs/ contains protobufs; * Update platform-native to pick up portduino crash fix (#4807) * Hopefully extract and commit to meshtastic.github.io * CI fixes * [Board] DIY "t-energy-s3_e22" (#4782) * New variant "t-energy-s3_e22" - Lilygo T-Energy-S3 - NanoVHF "Mesh-v1.06-TTGO-T18" board - Ebyte E22 Series * add board_level = extra * Update variant.h --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> * Consolidate variant build steps (#4806) * poc: consolidate variant build steps * use build-variant action * only checkout once and clean up after run * Revert "Consolidate variant build steps (#4806)" (#4816) This reverts commit 9f8d86cb25. * Make Ublox code more readable (#4727) * Simplify Ublox code Ublox comes in a myriad of versions and settings. Presently our configuration code does a lot of branching based on versions being or not being present. This patch adds version detection earlier in the piece and branches on the set gnssModel instead to create separate setup methods for Ublox 6, Ublox 7/8/9, and Ublox10. Additionally, adds a macro to make the code much shorter and more readable. * Make trunk happy * Make trunk happy --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consider the LoRa header when checking packet length * Minor fix (#4666) * Minor fixes It turns out setting a map value with the index notation causes an lookup that can be avoided with emplace. Apply this to one line in the StoreForward module. Fix also Cppcheck-determined highly minor performance increase by passing gpiochipname as a const reference :) The amount of cycles used on this laptop while learning about these callouts from cppcheck is unlikely to ever be more than the cycles saved by the fixes ;) * Update PortduinoGlue.cpp * Revert "Update classes on protobufs update" (#4824) * Revert "Update classes on protobufs update" * remove quotes to fix trunk. --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Implement optional second I2C bus for NRF52840 Enabled at compile-time if WIRE_INFERFACES_COUNT defined as 2 * Add I2C bus to Heltec T114 header pins SDA: P0.13 SCL: P0.16 Uses bus 1, leaving bus 0 routed to the unpopulated footprint for the RTC (general future-proofing) * Tidier macros * Swap SDA and SCL SDA=P0.16, SCL=P0.13 * Refactor and consolidate time window logic (#4826) * Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Rename message length headers and set payload max to 255 (#4827) * Rename message length headers and set payload max to 255 * Add MESHTASTIC_PKC_OVERHEAD * compare to MESHTASTIC_HEADER_LENGTH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> * Check for null before printing debug (#4835) * fix merge * try-fix crash * lib update: fix neighbors * fix GPIO0 mode after I2S audio * lib update: audio fix * lib update: fixes and improvements * extra * added ILI9342 (from master) * device-ui persistency * review update * fix request, add handled * fix merge issue * fix merge issue * remove newline * remove newlines from debug log * playing with locks; but needs more testing * diy mesh-tab initial files * board definition for mesh-tab (not yet used) * use DISPLAY_SET_RESOLUTION to avoid hw dependency in code * no telemetry for Indicator * 16MB partition for Indicator * 8MB partition for Indicator * stability: add SPI lock before saving via littleFS * dummy for config transfer (#5154) * update indicator (due to compile and linker errors) * remove faulty partition line * fix missing include * update indicator board * update mesh-tab ILI9143 TFT * fix naming * mesh-tab targets * try: disable duplicate locks * fix nodeDB erase loop when free mem returns invalid value (0, -1). * upgrade toolchain for nrf52 to gcc 9.3.1 * try-fix (workaround) T-Deck audio crash * update mesh-tab tft configs * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * update meshtab voltage divider * update mesh-tab ini * Fixed the issue that indicator device uploads via rp2040 serial port in some cases. * Fixed the issue that the touch I2C address definition was not effective. * Fixed the issue that the wifi configuration saved to RAM did not take effect. * rotation fix; added ST7789 3.2" display * dreamcatcher: assign GPIO44 to audio mclk * mesh-tab touch updates * add mesh-tab powersave as default * fix DIO1 wakeup * mesh-tab: enable alert message menu * Streamline board definitions for first tech preview. (#5390) * Streamline board definitions for first tech preview. TBD: Indicator Support * add point-of-checkin * use board/unphone.json --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> * fix native targets * add RadioLib debugging options for (T-Deck) * fix T-Deck build * fix native tft targets for rpi * remove wrong debug defines * t-deck-tft button is handled in device-ui * disable default lightsleep for indicator * Windows Support - Trunk and Platformio (#5397) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 * fix radioLib warnings for T-Deck target * wake screen with button only * use custom touch driver * define wake button for unphone * use board definition for mesh-tab * mesh-tab rotation upside-down * update platform native * use MESH_TAB hardware model definition * radioLib update (fix crash/assert) * reference seeed indicator fix commit arduino-esp32 * Remove unneeded file change :) * disable serial module and tcp socket api for standalone devices (#5591) * disable serial module and tcp socket api for standalone devices * just disable webserver, leave wifi available * disable socket api * mesh-tab: lower I2C touch frequency * log error when packet queue is full * add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * T-Deck: revert back to lovyanGFX touch driver * T-Deck: increase allocated PSRAM by 50% * mesh-tab: streamline target definitions * update RadioLib 7.1.2 * mesh-tab: fix touch rotation 4.0 inch display * Mesh-Tab platformio: 4.0inch: increase SPI frequency to max * mesh-tab: fix rotation for 3.5 IPS capacitive display * mesh-tab: fix rotation for 3.2 IPS capacitive display * restructure device-ui library into sub-directories * preparations for generic DisplayDriverFactory * T-Deck: increase LVGL memory size * update lib * trunk fmt --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> * Version this * Update platformio.ini (#6006) * tested higher speed and it works * Un-extra * Add -tft environments to the ci matrix * Exclude unphone tft for now. Something is wonky * fixed Indicator touch issue (causing IO expander issues), added more RAM * update lib * fixed Indicator touch issue (causing IO expander issues), added more RAM (#6013) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * update device-ui lib * Fix T-Deck SD card detection (#6023) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * fix SDCard for T-Deck; allow SPI frequency config * meshtasticd: Add X11 480x480 preset (#6020) * Littlefs per device * 2.6 update * [create-pull-request] automated change (#6037) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * InkHUD UI for E-Ink (#6034) * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * InkHUD: initial commit (WIP) Publicly discloses the current work in progress. Not ready for use. * feat: battery icon * chore: implement meshtastic/firmware #5454 Clean up some inline functions * feat: menu & settings for "jump to applet" * Remove the beforeRender pattern It hugely complicates things. If we can achieve acceptable performance without it, so much the better. * Remove previous Map Applet Needs re-implementation to work without the beforeRender pattern * refactor: reimplement map applet Doesn't require own position Doesn't require the beforeRender pattern to precalculate; now all-at-once in render Lays groundwork for fixed-size map with custom background image * feat: autoshow Allow user to select which applets (if any) should be automatically brought to foreground when they have new data to display * refactor: tidy-up applet constructors misc. jobs including: - consistent naming - move initializer-list-only constructors to header - give derived applets unique identifiers for MeshModule and OSThread logging * hotfix: autoshow always uses FAST update In future, it *will* often use FAST, but this will be controlled by a WindowManager component which has not yet been written. Hotfixed, in case anybody is attempting to use this development version on their deployed devices. * refactor: bringToForeground no longer requests FAST update In situations where an applet has moved to foreground because of user input, requestUpdate can be manually called, to upgrade to FAST refresh. More permanent solution for #23e1dfc * refactor: extract string storage from ThreadedMessageApplet Separates the code responsible for storing the limited message history, which was previously part of the ThreadedMessageApplet. We're now also using this code to store the "most recent message". Previously, this was stored in the `InkHUD::settings` struct, which was much less space-efficient. We're also now storing the latest DM, laying the foundation for an applet to display only DMs, which will complement the threaded message applet. * fix: text wrapping Attempts to fix a disparity between `Applet::printWrapped` and `Applet::getWrappedTextHeight`, which would occasionally cause a ThreadedMessageApplet message to render "too short", overlapping other text. * fix: purge old constructor This one slipped through the last commit.. * feat: DM Applet Useful in combination with the ThreadedMessageApplets, which don't show DMs * fix: applets shouldn't handle events while deactivated Only one or two applets were actually doing this, but I'm making a habit of having all applets return early from their event handling methods (as good practice), even if those methods are disabled elsewhere (e.g. not observing observable, return false from wantPacket) * refactor: allow requesting update without requesting autoshow Some applets may want to redraw, if they are displayed, but not feel the information is worth being brought to foreground for. Example: ActiveNodesApplet, when purging old nodes from list. * feat: custom "Recently Active" duration Allows users to tailor how long nodes will appear in the "Recents" applets, to suit the activity level of their mesh. * refactor: rename some applets * fix: autoshow * fix: getWrappedTextHeight Remove the "simulate" option from printWrapped; too hard to keep inline with genuine printing (because of AdafruitGFX Fonts' xAdvance, mabye?). Instead of simulating, we printWrapped as normal, and discard pixel output by setting crop. Both methods are similarly inefficient, apparently. * fix: text wrapping in ThreadedMessageApplet Wrong arguments were passed to Applet::printWrapped * feat: notifications for text messages Only shown if current applet does not already display the same info. Autoshow takes priority over notifications, if both would be used to display the same info. * feat: optimize FAST vs FULL updates New UpdateMediator class counts the number of each update type, and suggets which one to use, if the code doesn't already have an explicit prefence. Also performs "maintenance refreshes" unprovoked if display is not given an opportunity to before a FULL refresh through organic use. * chore: update todo list * fix: rare lock-up of buttons * refactor: backlight Replaces the initial proof-of-concept frontlight code for T-Echo Presses less than 5 seconds momentarily illuminate the display Presses longer than 5 seconds latch the light, requiring another tap to disable If user has previously removed the T-Echo's capacitive touch button (some DIY projects), the light is controlled by the on-screen menu. This fallback is used by all T-Echo devices, until a press of the capacitive touch button is detected. * feat: change tile with aux button Applied to VM-E290. Working as is, but a refactor of WindowManager::render is expected shortly, which will also tidy code from this push. * fix: specify out-of-the-box tile assignments Prevents placeholder applet showing on initial boot, for devices which use a mult-tile layout by default (VM-E290) * fix: verify settings version when loading * fix: wrong settings version * refactor: remove unimplemented argument from requestUpdate Specified whether or not to update "async", however the implementation was slightly broken, Applet::requestUpdate is only handled next time WindowManager::runOnce is called. This didn't allow code to actually await an update, which was misleading. * refactor: renaming Applet::render becomes Applet::onRender. Tile::displayedApplet becomes Tile::assignedApplet. New onRender method name allows us to move some of the pre and post render code from WindowManager into new Applet::render method, which will call onRender for us. * refactor: rendering Bit of a tidy-up. No intended change in behavior. * fix: optimize refresh times Shorter wait between retrying update if display was previously busy. Set anticipated update durations closer to observed values. No signifacant performance increase, but does decrease the amount of polling required. * feat: blocking update for E-Ink Option to wait for display update to complete before proceeding. Important when shutting down the device. * refactor: allow system applets to lock rendering Temporarily prevents other applets from rendering. * feat: boot and shutdown screens * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: Bluetooth pairing screen * fix: InkHUD defaults not honored * fix: random Bluetooth pin for NicheGraphics UIs * chore: button interrupts tested * fix: emoji reactions show as blank messages * fix: autoshow and notification triggered by outgoing message * feat: save InkHUD data before reboot Implemented with a new Observable. Previously, config and a few recent messages were saved on shutdown. These were lost if the device rebooted, for example when firmware settings were changed by a client. Now, the InkHUD config and recent messages saved on reboot, the same as during an intentional shutdown. * feat: imperial distances Controlled by the config.display.units setting * fix: hide features which are not yet implemented * refactor: faster rendering Previously, only tiles which requested update were re-rendered. Affected tiles had their region blanked before render, pixel by pixel. Benchmarking revealed that it is significantly faster to memset the framebuffer and redraw all tiles. * refactor: tile ownership Tiles and Applets now maintain a reciprocal link, which is enforced by asserts. Less confusing than the old situation, where an applet and a tile may disagree on their relationship. Empty tiles are now identified by a nullptr *Applet, instead of by having the placeholderApplet assigned. * fix: notifications and battery when menu open Do render notifications in front of menu; don't render battery icon in front of menu. * fix: simpler defaults Don't expose new users to multiplexed applets straight away: make them enable the feature for themselves. * fix: Inputs::TwoButton interrupts, when only one button in use * fix: ensure display update is complete when ESP32 enters light sleep Many panels power down automatically, but some require active intervention from us. If light sleep (ESP32) occurs during a display update, these panels could potentially remain powered on, applying voltage the pixels for an extended period of time, and potentially damaging the display. * fix: honor per-variant user tile limit Set as the default value for InkHUD::settings.userTiles.maxCount in nicheGraphics.h * feat: initial InkHUD support for Wireless Paper v1.1 and VM-E213 * refactor: Heard and Recents Applets Tidier code, significant speed boost. Possibly no noticable change in responsiveness, but rendering now spends much less time blocking execution, which is important for correction functioning of the other firmware components. * refactor: use a common pio base config Easier to make any future PlatformIO config changes * feat: tips Show information that we think the user might find helpful. Some info shown first boot only. Other info shown when / if relevant. * fix: text wrapping for '\n' Previously, the newline was honored, but the adojining word was not printed. * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: observable for reboot * refactor: Heltec VM-E290 installDefaultConfig * fix: random Bluetooth pin for NicheGraphics UIs * update device-ui: fix touch/crash issue while light sleep * Collect inkhud * fix: InkHUD shouldn't nag about timezone (#6040) * Guard eink drivers w/ MESHTASTIC_INCLUDE_NICHE_GRAPHICS * Case sensitive perhaps? * More case-sensitivity instances * Moar * RTC * Yet another case issue! * Sigh... * MUI: BT programming mode (#6046) * allow BT connection with disabled MUI * Update device-ui --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * MUI: fix nag timeout, disable BT programming mode for native (#6052) * allow BT connection with disabled MUI * Update device-ui * MUI: fix nag timeout default and remove programming mode for native --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * remove debuglog leftover * Wireless Paper: remove stray board_level = extra (#6060) Makes sure the InkHUD version gets build into the release zip * Fixed persistence stragglers from NodeDB / Device State divorce (#6059) * Increase `MAX_THREADS` for InkHUD variants with WiFi (#6064) * Licensed usage compliance (#6047) * Prevent psk and legacy admin channel on licensed mode * Move it * Consolidate warning strings * More holes * Device UI submodule bump * Prevent licensed users from rebroadcasting unlicensed traffic (#6068) * Prevent licensed users from rebroadcasting unlicensed traffic * Added method and enum to make user license status more clear * MUI: move UI initialization out of main.cpp and adding lightsleep observer + mutex (#6078) * added device-ui to lightSleep observers for handling graceful sleep; refactoring main.cpp * bump lib version * Update device-ui * unPhone TFT: include into build, enable SD card, increase PSRAM (#6082) * unPhone-tft: include into build, enable SD card, increase assigned PSRAM * lib update * Backup / migrate pub private keys when upgrading to new files in 2.6 (#6096) * Save a backup of pub/private keys before factory reset * Fix licensed mode warning * Unlock spi on else file doesn't exist * Update device-ui * Update protos and device-ui * [create-pull-request] automated change (#6129) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Proto * [create-pull-request] automated change (#6131) * Proto update for backup * [create-pull-request] automated change (#6133) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update protobufs * Space * [create-pull-request] automated change (#6144) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Protos * [create-pull-request] automated change (#6152) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Updeet * device-ui lib update * fix channel OK button * device-lib update: fix settings panel -> no scrolling * device-ui lib: last minute update * defined(SENSECAP_INDICATOR) * MUI hot-fix pub/priv keys * MUI hot-fix username dialog * MUI: BT programming mode button * Update protobufs --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-01 06:18:33 -06:00
A_Ponzano	7eb77276cd	Add support for new NRF52 board, MeshLink (#5736) ... * Add support for MeshLink * Updated, enabled watchdog and added button definition * added eink variant and removed some compile errors * Small board json file edit * Finally got trunk working (somehow?), this is just cleanup with trunk fmt * Various improvements and cleanup. Removed the use of PIN_3V3_En and defined a specific WD_EN pin instead for better clarity. Will do a bit more testing asap to make sure everything still works as intended :) * Enable on-board QSPI Flash * run trunk fmt with clang-format --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-02-16 19:49:17 -06:00
Eric Severance	c4fcbad372	Reboot before formatting LittleFS (#5900) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-01-20 11:43:35 -06:00
todd-herbert	f9876cfe9c	Wait for disconnection (#5859)	2025-01-15 07:19:51 -06:00
Eric Severance	124936b6cf	Avoid a potential NULL pointer reference in nrf52/BluetoothPhoneAPI (#5830)	2025-01-12 12:05:04 -06:00
Ben Meadors	485c371de4	Create a specific hw_model for WisMesh Tap (#5400) ... * Create a specific hw_model for WisMesh Tap * Trunk * HAS_ETHERNET * Remove it altogether * Don't need these either	2024-11-20 12:57:46 +08:00
Ben Meadors	f769c50fa5	More reduction (#5256) ... * Now with even fewer ings * Ye * Mo * QMA6100PSensor	2024-11-04 19:15:59 -06:00
Ben Meadors	50dac38a1b	Pass#2: Lots more savings in logs and string reduction surgery (#5251) ... * Pass#2: Lots more savings in logs and string reduction surgery * Don't need Thread suffix either * Warn	2024-11-04 12:16:25 -06:00
Tom Fifield	276067065e	Log cleanups (#5135) ... * Log cleanups change log levels, shorten log messages, delete commented out logs * Address comments from review * Remove full stops * EDEBUG --> DEBUG	2024-11-04 06:09:23 -06:00
Thomas Göttgens	05e4a639a1	remove newline from logging statements. (#5022) ... remove newline from logging statements in code. The LOG_* functions will now magically add it at the end. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-14 15:11:43 +11:00
Thomas Göttgens	9d9258a59b	conflict resolution	2024-10-08 11:41:54 +02:00
jhps	37f294d0a6	In shutdown, on button press, wake back to application rather than into the loader. (#4997) ... Suggested by lyusupov and implemented by todd-herbert. https://github.com/meshtastic/firmware/issues/4651	2024-10-07 20:39:59 -05:00
Tom Fifield	8a370c5381	Revert "Revert "Remove unused Jlink monitoring files (#4953)" (#4959)" (#4966) ... This reverts commit 783466f116.	2024-10-05 19:34:51 -05:00
Tom Fifield	0c90a2274f	Remove unused headers (#4954) ... These files had existing since 2020 without being used/modified.	2024-10-05 05:39:13 -05:00
Ben Meadors	783466f116	Revert "Remove unused Jlink monitoring files (#4953)" (#4959) ... This reverts commit 55049ed547.	2024-10-05 05:24:59 -05:00
Tom Fifield	55049ed547	Remove unused Jlink monitoring files (#4953) ... The NRF52 JLINK_MONITOR are unmodified copies of code from Nordic (https://github.com/NordicPlayground/j-link-monitoring-mode-debugging ), which are not used by our firmware and have not been touched in ~4 years.	2024-10-05 05:24:12 -05:00
Ben Meadors	8efc15f4d9	Ignore seen phoneapi packets (#4888) ... * Ignore PhoneAPI packet if it's been seen * ignoramus * Also keep track of the last 20 packet IDs * Fill * Make this match the nimble one * Add the log too * Ignore zero ID packets * Remove message entirely * TRunkt	2024-09-27 20:09:53 -05:00
Thomas Göttgens	12481b568a	fix a lot of nuisances reported by cppcheck (#4872) ... * fix a lot of nuisances reported by cppcheck * fix portduino	2024-09-25 19:09:06 -05:00
Ben Meadors	4128d75ad4	IS_ONE_OF macro to make long chains of conditions more concise and easy to follow (#4860) ... * Is one of macro * Moar * Whoops * Trunk * isOneOf function backed macro	2024-09-25 13:50:00 -05:00
Tom Fifield	e6e05dda1e	Merge branch 'master' into master	2024-09-25 15:10:48 +08:00
Ben Meadors	9cbabb0468	Teardown bluetooth phoneAPI better and fix client notification issue (#4834) ... * Teardown bluetooth phoneAPI better and fix client notification issue * Fix client notification draining	2024-09-23 15:51:05 -05:00
GUVWAF	db4a793aa9	Merge branch 'master' into master	2024-09-18 11:38:40 +02:00
Tom Fifield	41a769aa06	Fix Heltec T114 vendor definition ... @dahanc pointed out there was an extra one in there.	2024-09-16 13:55:27 +08:00
Ben Meadors	8d57b6164a	Add Heltec T1114 hardware model to build (#4719)	2024-09-15 20:37:19 -05:00
GUVWAF	9f3a1c1214	Trunk fmt	2024-09-12 19:12:57 +02:00
beegee-tokyo	c4c85777d0	Another try to get the code format correct.	2024-09-12 13:20:09 +08:00