* Show owner.short_name on boot and sleep screen (on e-ink)
* Update Screen.cpp - new line for short_name
Boot screen short_name now below the region setting.
Looks better on small screens.
* Draw short_name on right
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Move static functions into Screen.h, show compass during calibration
* Move to _fontHeight macro to avoid collision
* Move some alert functions to new alert handler
* Catch missed reboot code
* ESP32 fixes
* Bump esp8266-oled-ssd1306
* Fixes for when a device has no screen
* Use new startAlert(char*) helper class
* Add EINK bits back to alert handling
* Add noop class for no-display devices
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* fix my botched merge - keep board_level = extra flag for rak3631_dbg
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Implement replies for all telemetry types based on variant tag
* Remove check for `ignoreRequest`: modules can set this, don't need to check
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* WIP log characteristic
* Bluetooth logging plumbing
* Characteristic
* Callback
* Check for nullptr
* Esp32 bluetooth impl
* Formatting
* Add thread name and log level
* Add settings guard
* Remove comments
* Field name
* Fixes esp32
* Open it up
* Whoops
* Move va_end past our logic
Board is very similar to the Heltec HT-C62 based boards (Heltec HT62 variant) but due to wiring of SK6812 Neopixel LED to GPIO2 it becomes incompatible due to the regular HT-C62 dev board using a simple LED on the same GPIO. Depends on [protobufs#521](https://github.com/meshtastic/protobufs/pull/521).
Works:
* SK6812 Neopixel on GPIO2
* [GXCAS GXHTV3](https://www.lcsc.com/product-detail/Temperature-Sensors_GXCAS-GXHTV3C_C5441730.html) (SHTC3 compatible)
Won't fix:
* Battery reading - Board has no voltage divider on VBAT (board has a 1.25mm pitch "JST" style connector and a TP4054 charge IC)
* Main thread LED - Board has no LED on simple GPIO
Board schematic: [HRU3601.pdf](https://github.com/user-attachments/files/15874850/HRU3601.pdf)
Signed-off-by: Andrew Yong <me@ndoo.sg>
* DropzoneModule hello world
* Buttoning things up
* Exclude by default
* Upstream refs
* Cleanup
* Add modules folder to path
* Case and path matters
* Exclude from header
* Guard
* Refactor GPSPowerState enum
Identifies a case where the GPS hardware is awake, but an update is not yet desired
* Change terminology
* Clear old lock-time prediction on triple press
* Use exponential smoothing to predict lock time
* Rename averageLockTime to predictedLockTime
* Attempt: Send PMREQ with duration 0 on MCU deep-sleep
* Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep
* Revert "Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep"
This reverts commit 8b697cd2a4.
* Revert "Attempt: Send PMREQ with duration 0 on MCU deep-sleep"
This reverts commit 9d29ec7603.
* Workaround to allow bluetooth disable on NRF52
* Use miminum tx power for bluetooth
* Reorganize
* Instantiate nrf52Bluetooth correctly..
* Change log message
* DAC and DB values based on dBm using interpolation
* Moved getDACandDB funtion
Moved getDACandDB funtion up so it won't conflict with RF95_MAX_POWER
* Added DAC output to LOG_INFO
Added DAC output to LOG_INFO
* Make Trunk Happy
* Send NAK on primary if original packet couldn't be decoded
* Add checks for `isDecoded` when accessing `decoded`
* Channel index should be of original packet, not of newly allocated NAK
* Replace (bool) isAwake with an enum, to track standby states
* Tidy-up, extra logging
* Rename enum values
* Reorder GPSPowerState enum
Possibly more intuitive when reading logs
* Avoid lego comments
de22c57298 (r1627334779)
REGULATORY_GAIN is the total system gain in dBm to subtract from the configured Tx power, to remain within regulatory ERP limit for non-licensed operators.
This value should be set in variant.h and is PA gain + antenna gain (if system ships with an antenna).
This is similar to antenna_gain/NL80211_ATTR_WIPHY_ANTENNA_GAIN/NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN setting in Linux Regulatory/OpenWrt/mac80211/nl80211/iw.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Add REGULATORY_ prefix to LORA_REGIONCODE to prepare for more regulatory configuration options, and update comment block accordingly too.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* DOES NOT WORK
* trunk
* DOES NOT WORK
* trunk
* DOES NOT WORK
* trunk
* WIP: LR11x0 non functional interface code. Please don't expect a working firmware out of this! I don't know what i am doing! :-)
* trunk fmt
* use canon toolchain
* update and fix radiolib dependency
* Switch Radiolib back to GIT checkout
* enable tcxo and fix startReceive
* progress
* Correct midjudgement on scope of build defines.
* - enable peripheral power rail during startup init
- fix portduino builds
* add tracker pinout variant
* update to radiolib 6.6.0 API (aka: godmode is not for mere mortals)
* tracker is not so 'extra' any more
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
