6013 Commits

Author	SHA1	Message	Date
github-actions[bot]	e1c259ae32	Update protobufs (#8396) ... Co-authored-by: fifieldt <1287116+fifieldt@users.noreply.github.com>	2025-10-18 18:21:24 -05:00
Daniel.Cao	af8407aca9	Board support: RAK3401+RAK13302 1-watt (#8140) ... * Add RAK3401 variant files * Add SPI configuration for RAK3401 and RAK13302 variants * Refactor SPI pin configuration and clean up variant definitions for RAK3401 * Add TX_GAIN_LORA for RAK13302 Power Amp * Fix merge --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>	2025-10-19 08:53:39 +11:00
Jonathan Bennett	5953b4704e	Force CannedMessages to another node to be a PKI DM (#8373)	2025-10-16 14:01:04 -05:00
Ben Meadors	a34c584028	Merge branch 'master' into develop	2025-10-16 06:08:54 -05:00
Ben Meadors	865b46ceef	Ignore MQTT Client Proxy messages while not in sendpackets state (#8358)	2025-10-16 06:07:38 -05:00
Jonathan Bennett	4e0a4cc45f	Log the lora frequency error when receiving a packet. (#8343)	2025-10-15 06:34:28 -05:00
Clive Blackledge	a6df18e60a	Guarding PhoneAPI node-info staging with mutex to prevent BLE future foot-gun (#8354) ... * Eliminating foot-gun and placing Phone NodeInfo into a mutex * Swapping over to concurrency::Lock from mutex	2025-10-15 06:08:06 -05:00
Erayd	9a8aeb25ab	Add a general-purpose packet cache (#8341) ... * Add general-purpose packet cache This commit adds a caching system that will save packet data in a much more compact form than the regular MeshPacket protobuf. It cannot be worked with directly to the same degree (although the packet header is available), but consumes *much* less memory, and as a result can be used to temporarily store large numbers of packets. Cached packets can be retrieved either by their (from, id) tuple, or by their hash. This cache is a pre-requisite for the upcoming packet replay feature. * Remove debug initialiser Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Fix ordering Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Add missing size assignment Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Add comments for hash & bucket macros * Make it clear that this field stores a map of the original data --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-14 19:22:45 -05:00
Ben Meadors	dbb439f121	Merge pull request #8337 from meshtastic/develop ... Develop to master merge	2025-10-13 20:51:52 -05:00
Ben Meadors	5814f3e7d2	Revert "Fix Station G2 Lora Power Settings (#8273)" (#8332) ... This reverts commit 05edcc5d6c.	2025-10-13 17:17:32 -05:00
Markus	a71b47b5bb	rework sensor instantiation to saves memory by removing the static allocation (#8054) ... * rework I2C sensor init the goal is to only instantiate sensors that are pressend to save memory. side effacts: - easyer sensor integration (less C&P code) - nodeTelemetrySensorsMap can be removed when all devices are migrated * add missing ifdef * refactor a bunch of more sensors RAM -816 Flash -916 * fix build for t1000 * refactor more sensors RAM -192 Flash -60 * improve error handling Flash -112 * fix build * fix build * fix IndicatorSensor * fix tracker-t1000-e build not sure what magic is used but it works * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/DFRobotGravitySensor.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Fix --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-10-13 11:09:33 -05:00
Steven Wu	9df5aa8c70	Fix can not detect battery status while using INA226 (#8330) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-13 08:15:21 -05:00
Tom Fifield	130833b5be	Fix erroneous limiting of power in Ham Mode (#8322) ... Ham Mode ignores region regulatory limits, so regardless of whether we set a single TX_GAIN_LORA or an array with a non-linear PA, we shouldn't limit the power. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-13 07:50:57 -05:00
Dirk Mueller	fe6509a0f2	Avoid exceeding allocated buffers when doing MQTT proxying (#8320) ... the topic length could be longer than 65 characters. similarly for the payload. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-13 06:57:21 -05:00
Clive Blackledge	fcaa168d2d	Ble reconnect prefetch bug fix, plus some speed enhancements (#8324) ... * Fixing bluetooth reconnects and adding performance * Added comments	2025-10-13 06:32:05 -05:00
l0g-lab	7537d28419	Nodelist: choice of long or short name (#7926) ... * update to use long names for pager * remove duplicate * add menu item * fix after conflict * menu name change. use sanitizeString * fix formatting issue. should pass trunk now. * remove auto-generated protobufs * remove log, add tdeck, improvements. --------- Co-authored-by: l0g-lab <l0g-lab@users.noreply.github.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-12 08:25:15 -05:00
Ben Meadors	5d71776527	Merge pull request #8317 from meshtastic/master ... Master backmerge	2025-10-12 07:41:04 -05:00
Ben Meadors	661e596dbb	Fix muted channel compile errors after protobuf move (#8316)	2025-10-12 07:39:23 -05:00
Ben Meadors	a6732682de	Opt in to telemetry going forward (#8059)	2025-10-12 06:30:17 -05:00
Jason P	f0126d44e2	More BaseUI Frame Visibility Toggles (#8252) ... * Add Power and Environmental Telemetry Hide/Show * Allow Power and Telemetry Frames even if module disabled --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-12 06:28:23 -05:00
Clive Blackledge	fb08e17c39	Increase bluetooth 5.0 PHY speed and MTU on esp32_s3 (#8261) ... * Increase Bluetooth speed to 2MB, increase MTU * Adding esp32c6 * trunk fmt..	2025-10-12 05:35:00 -05:00
Tom Fifield	11aff46af1	Remove T1000E GPS startup delay sequence (#8236) ... 8 months ago, when this was added to the code, the GPS probe code was still a little flaky. Particularly after #6114 and #6116 were added, reliability improved for all devices as we were sending fewer calls on the bus. Today, the T1000E is the only Meshtastic device that regularly takes 2, 3, or 4 attempts to be detected via the probe code. Removing these lines, on my T1000E, results in the AG3335 being detected immediately. Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-12 05:34:34 -05:00
github-actions[bot]	cb11e6b720	Update protobufs (#8305) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-10-12 05:34:00 -05:00
Jonathan Bennett	8bf32dc042	Attach an interrupt to EXT_PWR_DETECT if present, and force a screen redraw on a power change.	2025-10-11 11:31:42 -05:00
Ben Meadors	73cadce581	Fix BLE stateful issues (#8287)	2025-10-11 11:31:42 -05:00
Tom Fifield	30d6962e79	Fix Station G2 Lora Power Settings (#8273) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * Fix Station G2 Lora Power Settings In #8107 we introduced the ability to specify gain values for non-linear power amplifiers. This patch adds appropriate values for the Station G2, based on the table at https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test Fixes https://github.com/meshtastic/firmware/issues/7239 --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-11 11:31:42 -05:00
Ben Meadors	f99747180e	NimBLE speedup (#8281) ... * Remove status polling code in NimBLE * Goober --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-11 11:31:42 -05:00
Andrew Yong	64bfe73c06	fix: Move #include "variant.h" to top of file (fixes #8276) (#8278) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * fix: Move `#include "variant.h"` to top of file (fixes #8276) The original line being further down the file causes any #ifdef/defined() checks for definitions in variant.h to silently skip. This was noticed when `USE_GC1109_PA` in Heltec v4 and Heltec Wireless Tracker failed to correct program TX_GAIN_LORA, but will also affect any variant.h-dependent configurations in this file, if they would have been defined above where the `#include` previously was. --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-11 11:31:42 -05:00
Austin	cafb007ec4	mDNS: Advertise pio_env (for OTA scripts) (#8298)	2025-10-11 10:30:47 -05:00
Jonathan Bennett	e5a2ce54e7	Attach an interrupt to EXT_PWR_DETECT if present, and force a screen redraw on a power change.	2025-10-09 19:07:20 -05:00
Ben Meadors	45f15b8fe6	Fix BLE stateful issues (#8287)	2025-10-09 12:44:00 -05:00
Tom Fifield	05edcc5d6c	Fix Station G2 Lora Power Settings (#8273) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * Fix Station G2 Lora Power Settings In #8107 we introduced the ability to specify gain values for non-linear power amplifiers. This patch adds appropriate values for the Station G2, based on the table at https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test Fixes https://github.com/meshtastic/firmware/issues/7239 --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-08 16:03:26 -05:00
Ben Meadors	828e11cc48	NimBLE speedup (#8281) ... * Remove status polling code in NimBLE * Goober --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-08 14:16:57 -05:00
Andrew Yong	7822f28152	fix: Move #include "variant.h" to top of file (fixes #8276) (#8278) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * fix: Move `#include "variant.h"` to top of file (fixes #8276) The original line being further down the file causes any #ifdef/defined() checks for definitions in variant.h to silently skip. This was noticed when `USE_GC1109_PA` in Heltec v4 and Heltec Wireless Tracker failed to correct program TX_GAIN_LORA, but will also affect any variant.h-dependent configurations in this file, if they would have been defined above where the `#include` previously was. --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-08 11:33:50 -05:00
Ben Meadors	fcb1d64eb9	Bloop	2025-10-07 17:47:08 -05:00
Ben Meadors	9b7b8ffb21	Merge pull request #8247 from meshtastic/develop ... Develop to master	2025-10-07 06:26:28 -05:00
szlifier	f0e4ea7664	Add SHT4x serial number for detection (#8222) ... SHT4X chip recognized as SHT31, registerValue that stores first bytes of chip's serial number did not mach the chip. Added a serial number match for SHT40 found in a SONOFF SNZB-02P.	2025-10-07 06:25:38 -05:00
Tom Fifield	468b40e8db	Wait until after GPS lock hold before updating position, if we can. (#8064) ... * Wait until after GPS lock hold before updating position, if we can. After the recent patch, we hold lock for a bit before updating the position. The positions that come in after the hold are genuinely better positions than what we've been doing before. However, they only come 20 seconds after we've got lock. Previously, we would update the local position as soon as we got a lock as well as at the end of the hold, since a hold was not always possible. With this patch, if the settings allow, we should skip that first local position update. Fixes https://github.com/meshtastic/firmware/issues/8029 * Fix falling edge handling. * spelling Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Congeal lock handling * Add named constants * define unit to avoid confusion Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * ifdef, not if. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Add handling for when we first turn on. * Don't run if not active * Reset fixhold * Logic fixes * Add path for ACTIVE--> IDLE --> ACTIVE Previously we only covered HARDSLEEP --> ACTIVE. * Change hold time to gps_update_interval - 10s * Update comment * Add extra buffer to avoid re-starting hold --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 06:24:09 -05:00
Ben Meadors	bd9076b740	Remove risky change	2025-10-07 06:14:35 -05:00
Chloe Bethel	81a5aeff74	Fix serial pins for Ebyte E77 MBL board (#8246) ... Also move RAK3172 and new EBYTE_E77_MBL define to variant.h, as this makes VSCode know about the defines properly... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 06:11:26 -05:00
Ben Meadors	f13e7c20ba	Merge branch 'master' into develop	2025-10-07 06:08:18 -05:00
Tom Fifield	5bcc47dddb	Revert "develop --> Master" (#8244)	2025-10-07 06:00:09 -05:00
Jonathan Bennett	668cc9fd64	Do slightly better at threading the search for GPS hardware (#8240) ... * Do slightly better at threading the search for GPS hardware * Formatting and minor logic fix * Remove now-spam GPS Log messages --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 05:58:39 -05:00
Tom Fifield	8023f475ee	Merge branch 'develop' into master	2025-10-07 16:40:44 +11:00
Jonathan Bennett	b696e083f3	Log antispam (#8241) ... * less power spam * Don't warn about the first 4 GPS checksum failures	2025-10-07 16:37:04 +11:00
Ben Meadors	627c0145e7	Centralize getNodeId and fix references to owner.id (#8230)	2025-10-06 07:56:27 -05:00
Dmitry Dubinin	29f4d99bf6	Add Adaptive Polling Intervals to WebServer (#7864) ... * feat: add adaptive polling intervals to WebServer Replace fixed 5ms polling with adaptive intervals based on HTTP activity: - 50ms during active periods (first 5 seconds after request) - 200ms during medium activity (5-30 seconds) - 1000ms during idle periods (30+ seconds) Reduces CPU usage significantly during idle periods while maintaining responsiveness when handling HTTP requests. * Fix integer overflow and magic numbers in WebServer - Handle millis() overflow in getAdaptiveInterval() - Replace magic numbers with named constants - Improve code readability and maintainability	2025-10-06 05:52:40 -05:00
GUVWAF	5c2997ef53	Print only one byte	2025-10-05 17:03:52 +02:00
GUVWAF	c147ce9a85	Update next-hops based on traceroute result	2025-10-05 16:58:42 +02:00
Ben Meadors	27f316b931	Merge pull request #8216 from GUVWAF/reprocessPacket ... Reprocess repeated packets and deduplicate logic	2025-10-05 08:58:13 -05:00