468 Commits

Author	SHA1	Message	Date
Manuel	b3525c2569	T-Deck Pro support (#6936) ... * initial draft * fix touchscreen * fix touchscreen * optimize GPS * battery management * cleanup comments * enable vibration motor * refactored TCA8418Keyboard * update HW_VENDOR id * manual fixes after merge * fix keyboard/BQ27220 detection * add BQ27220 * modify charge voltage and current * update XpowerLib * design capacity * try-fix charge behavior * improve Vbus detection * moved variant into esp32s3 folder --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2025-07-21 19:33:24 +02:00
Jonathan Bennett	91049d0db3	Misc cppcheck fixes (#7370)	2025-07-20 06:19:45 -05:00
Styne13	5e28ee6d1e	NodeDB.cpp: Fix iOS bluetooth crash by ensuring UINT32_MAX is not used (#7312) ... Signed-off-by: Marcel <6253936+Styne13@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-13 06:26:35 -05:00
Austin	86be2ac12f	userPrefs: Set default ringtone nag time (#7314)	2025-07-12 16:26:25 -05:00
Jonathan Bennett	1ca0584ba0	Add first config override for Native (#7306)	2025-07-11 16:09:59 -05:00
Ben Meadors	5ae8021aa6	I'm dumb	2025-07-11 08:28:21 -05:00
Ben Meadors	9798a91e7b	Delete ringtone.proto file for factory reset (#7303)	2025-07-11 08:22:50 -05:00
Jonathan Bennett	40c586ca97	Automatically bail user out of displaymode_color when not HAS_TFT (#7248)	2025-07-06 16:36:22 -05:00
Jonathan Bennett	a6be2e46ed	2.7 fixes w2 (#7148) ... * Initial work on splitting notification renderer into components for reuse * More progress * Fix notification popup * more fix, less crash * Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar * Small changes for EInk to not crowd elements * Change System frame menu over to better match actions; added color picker for T114 * Fix build errors and add T190 for testing * Logic gates are hard sometimes * Screen Color Picker changes, defined Yellow as a Color. * Additional colors and tuning * Abandon std::sort in NodeDB, and associated fixes (#7175) * Generate short name for nodes that don't have user yet * Add reboot menu * Sort fixes * noop sort option to avoid infinite loop * Refactor Overlay Banner * Continuing work on Color Picker * Add BaseUI menus to add and remove Favorited Nodes * Create TFT_MESH_OVERRIDE for variants.h and defined colors * Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot. * T114 defaults to White, Yellow is now bright Yellow * Revert "T114 defaults to White, Yellow is now bright Yellow" This reverts commit 8d05e17f11. * Only show OEM text if not OLED * Adjust OEM logo to maximize visible area * Start plumbing in Color Picker changes * Finished plumbing * Fix warning * Revert "Fix warning" This reverts commit 2e8aecd52d. * Fix display not fully redrawing * T-Deck should get color too * Emote Revamp * Update emotes.cpp * Poo Emote fix * Trunk fix * Add secret test menu and number picker * Missed bits * Save colors between reboots * Save Clock Face election to protobuf * Make reboot first, then settings * Add padding for single line pop-ups * Compass saving and faster menus * Resolve build issue with Excluding GPS * Resolve issue with memory bars on EInk * Add brightness settings for supported screen (#7182) * Add brightness menu. * add loop destination selection. * Bring back color (and sanity) to the menus! * Trunk --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Wilson <m.tools@qq.com>	2025-07-02 20:50:49 -05:00
Daniel.Cao	90e99b2bac	feat: add support for RAK3312 (New RAKwireless wiscore ESP32-S3 + SX1262) (#7115) ... * Add support for RAK3112 variant with necessary configurations and definitions * Add the configuration of the LED pin * Refactor rak3112 variant configuration: update name, remove unused files, * Update RAK3112 configuration: refine memory settings, adjust GPS pin definitions * Update RAK3112 hardware vendor definition to use correct model * configure LED pins and update module definitions * Update USB mode configuration for RAK3112 board * Update power and battery configuration in rak3112 variant * Cancel the modification of mesh.pb.h * Rename RAKwireless RAK3112 to RAK3312 --------- Co-authored-by: daniel <daniel.cao@rakwireless.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-02 06:03:42 -05:00
Jonathan Bennett	b6a13f1114	Add check for theoretically impossible comparison, and drop nodenum comparison (#7165)	2025-06-28 22:54:03 -05:00
Jonathan Bennett	2bcf608654	Last second fixes (#7156) ... * Ditch the 30 second delay for button presses * Only order strictly weakly * Too many comments! * Only sort the populated meshNodes	2025-06-28 08:19:31 -05:00
Jonathan Bennett	705515ace2	Resize meshNodes to MAX + 1 to avoid crash during sort	2025-06-27 11:46:33 -05:00
Jason P	29e7a71c97	2.7 Miscellaneous Fixes - Week 1 (#7102) ... * Update Favorite Node Message Options to unify against other screens * Rebuild Horizontal Battery, Resolve overlap concerns * Update positioning on Message frame and fix drawCommonHeader overlay * Beginnings of creating isHighResolution bool * Fixup determineResolution() * Implement isHighResolution in place of SCREEN_WIDTH > 128 checks * Line Spacing bound to isHighResolution * Analog Clock for all * Add AM/PM to Analog Clock if isHighResolution and not TWatch * Simple Menu Queue, and add time menu * Fix prompt string for 12/24 hour picker * More menu banners into functions * Fix Action Menu on Home frame * Correct pop-up calculation size and continue to leverage isHighResolution * Move menu bits to MenuHandler * Plumb in the digital/analog picker * Correct Clock Face Picker title * Clock picker fixes * Migrate the rest of the menus to MenuHandler.* * Add compass menu and needle point option * Minor fix for compass point menu * Correct Home menu into typical format * Fix emoji bounce, overlap, and missing commonHeader * Sanitize long_names and removed unused variables * Slightly better sanitizeString variation * Resolved apostrophe being shown as upside down question mark * Gotta keep height and width in expected order * Remove Second Hand for Analog Clock on EInk displays * Fix Clock menu option decision tree * Improvements to Eink Navigation * Pause Banner for Eink moved to bottom * Updated working for 12-/24-hour menu and Added US/Arizona to timezone picker * Add Adhoc Ping and resolve error with std::string sanitized * Hide quick toggle as option is available within Action Menu, commented out for the moment * Remove old battery icon and option, use drawCommonHeader throughout, re-add battery to Clock frames * fix misc build warnings. NFC * Update Analog Clock on EInk to show more digits * Establish Action Menu on all node list screens, add NodeDB reset (with confirmation) option * Add Toggle Backlight for EInk Displays * Suppress action screen Full refresh for Eink * Adjust drawBluetoothConnectedIcon on TWatch * Maintain clock frame when switching between Clock Faces * Move modules beyond the clock in navigation * addressed the conflicts, and changed target branch to 2.7-MiscFixes-Week1 * cleanup, cheers * Add AM/PM to low resolution clock also * Small adjustments to AM/PM replacement across various devices * Resolve dangling pointer issues with sanitize code * Update comments for Screen.cpp related to module load change * Trunk runs * Update message caching to correct aged timestamp * Menu wording adjustments * Time Format wording * Use all the rows on EInk since with autohide the navigation bar * Finalize Time Format picker word change * Retired drawFunctionOverlay code No longer being used * Actually honor the points-north setting * Trunk * Compressed action list * Update no-op showOverlayBanner function * trunk * Correct T_Watch_S3 specific line * Autosized Action menu per screen * Finalize Autosized Action menu per screen * Unify Message Titles * Reorder Timezones to match expectations * Adjust text location for pop-ups * Revert "Actually honor the points-north setting" This reverts commit 20988aa4fa. * Make NodeDB sort its internal vector when lastheard is updated. Don't sort in NodeListRenderer * Update src/graphics/draw/NodeListRenderer.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Pass by reference -- Thanks Copilot! * Throttle sorting just a touch * Check more carefully for own node * Eliminate some now-unneeded sorting * Move function after include * Putting Modules back to position 0 and some trunk checks found * Add Scrollbar for Action menus * Second attempt to move modules down the navigation bar * Continue effort of moving modules in the navigation * Canned Messages tweak * Replicate Function + Space through the Menu System * Move init button parameters into config struct (#7145) * Remove bundling of web-ui from ESP32 devices (#7143) * Fixed triple click GPS toggle bungle * Move init button parameters into config struct * Reapply "Actually honor the points-north setting" This reverts commit 42c1967e7b. * Actually do compass pointings correctly * Tweak to node bearings * Menu wording tweaks * Get the compass_north_top logic right * Don't jump frames after setting Compass * Get rid of the extra bearingTo functions * Don't blink Mail on EInk Clock Screens * Actually set lat and long * Calibrate * Convert Radians to Degrees * More degree vs radians fixes * De-duplicate draw arrow function * Don't advertise compass calibration without an accell thread. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: csrutil <keming.cao@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-26 22:11:20 -05:00
Ben Meadors	18fbc2149d	Fix iOS bluetooth crash: Ensure UINT32_MAX is not used (#7147)	2025-06-26 19:23:08 -05:00
Ben Meadors	7512673b09	Do not beacon Device telemetry by default anymore (#7116) ... * Do not beacon Device telemetry by default anymore * Update * Old default interval for sensor * Added userpref * Addd tracker to default telemetry roles * Let the macro do its job in router mode	2025-06-25 16:36:33 -05:00
Jonathan Bennett	4feaec651f	Unify the native display config between legacy display and MUI (#6838) ... * Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-21 06:36:04 -05:00
Ben Meadors	ac52edd11a	Add the ability to share ignored contacts (for blacklisting problematic nodes) (#7044)	2025-06-15 07:34:03 -05:00
Jonathan Bennett	e623c70bd0	More clear key warning messages.	2025-06-14 19:35:57 -05:00
Jonathan Bennett	1557219bad	More low-entropy keys, and don't issue a false warning when changing … (#7041) ... * More low-entropy keys, and don't issue a false warning when changing node name * CopyPasta Wasn't Tasty * When the phone sets the publickey size to 0, regenerate right away	2025-06-14 17:09:22 -05:00
Jonathan Bennett	a1a5503fe9	Another known key	2025-06-12 15:18:26 -05:00
Jonathan Bennett	3b94981e56	Key erase (#7018) ... * Wipe keys if low entropy * Client Notification Payload variant * Don't call service before it's created * Lucky Number 14 * Catch for low-entropy keys even before region is set	2025-06-12 12:13:39 -05:00
Jonathan Bennett	e5f6804421	Add boolean to only warn a user of a duplicated key once per boot	2025-06-10 13:28:36 -05:00
Jonathan Bennett	4bf2dd04ae	Warn users about low entropy keys (#7003) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-10 06:33:13 -05:00
Christian Crank	b8970d66a1	Addition of Device Role inside of userPrefs.jsonc (#6972) ... * addition of device.role via userprefs. USERPREFS_CONFIG_DEVICE_ROLE now usable, ROUTER*, LOST_AND_FOUND, and REPEATER disabled. * Removing added IS_ONE_OF macro definition since meshUtils.h exists - thanks Ben! * Fix clang-format issues in NodeDB.cpp utilizing Trunk	2025-06-08 16:51:37 +10:00
Jonathan Bennett	55b2bbf937	Generate keys when Lora Region is set (#6951) ... * Generate keys when Lora Region changes * Nest the ifs * Even more entropy * Namespacing	2025-06-04 12:16:37 -05:00
Ben Meadors	7cd50d7044	If a contact is add from a QR, it's "verified" manually (#6858) ... * If a contact is add from a QR, it's "verified" manually * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-22 07:40:36 -05:00
Jonathan Bennett	41c1b29d70	Add basic handling for is_manually_validated (#6856)	2025-05-20 21:29:29 -05:00
Ben Meadors	7cffd9ba70	Added new map report opt-in for compliance and limit map report (and default) to one hour (#6813) ... * Added new map report opt-in for compliance and limit map report (and default) to one hour * Trunk	2025-05-14 15:31:28 -05:00
Ben Meadors	fc64bea698	Unmessagable implementation and defaults (#6811) ... * Unmessagable implementation and defaults * Router and router late are unmessagable by default * Update src/modules/AdminModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-14 15:28:09 -05:00
Austin	f16402dec1	MQTT userprefs (#6802)	2025-05-14 13:39:46 -05:00
Ben Meadors	0a8bd1e4be	Add contact admin message (for QR code) (#6806)	2025-05-14 05:33:51 -05:00
Thomas Göttgens	cc66f7c79b	Crowpanel 4.3, 5.0, 7.0 support (#6611) ... * SD software SPI control * fix notification crash; * allow wake on touch * don't build non-MUI variants * use pwm buzzer * Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5 * add hardware ID for TFT panels * Add stubs for the bigger panels. WIP! * fix braces * elecrow 4.3, 5.0, 7.0 support * completed implementation 4.3, 5.0, 7.0 variants * NodeDB default config & simplified light sleep macros * trunk fmt * remove flags * removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-05-13 14:15:52 +02:00
todd-herbert	74b3dc34e4	Fix crash when clearing NRF52 BLE bonds (#6609) ... * Fix crash before clearing BLE bonds * Prevent clients re-pairing BLE during factory reset Clients seem able to re-pair BLE after clearing bonds during factory reset, even after advertising disabled. This seems to primarily occur on Android devices, which seem to more actively maintain the BLE connection. As a workaround, `NRF52Bluetooth::shutdown` swaps the BLE pairing callback to one which actively rejects new connections. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-17 17:11:42 -05:00
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
Thomas Göttgens	606abfc116	Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507) ... * Fix several features of M1 and M2 (i know what the 7 is now ...) * 'THe' should be 'The'. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * remove floating definition --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-07 05:46:22 -05:00
Manuel	ea4ce8d827	MUI unPhone-tft: fix defaults (#6477)	2025-04-01 08:53:15 -05:00
Thomas Göttgens	3148e7277d	Fix a couple of warnings (#6445) ... * Fix a couple of warnings * fix build error --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-29 08:14:24 -05:00
Austin	33f2b7144f	Default to UDP enabled if it's available (#6394)	2025-03-25 11:39:19 -05:00
Austin	0ddb507055	userPrefs: Add WiFi SSID/PW, and UDP multicast configs (#6387)	2025-03-24 19:38:47 -05:00
dfsx1	cf7f0f9d08	Fix NodeInfo exploit overwriting publicKey in NodeDB (#6372) ... Co-authored-by: dfsx1 <dfsx1@users.noreply.github.com>	2025-03-23 05:49:06 -05:00
Mike	31c0e8fa2c	Support WiFi OTA (#6352) ... * Support WiFi OTA * Fix trunk warnings * Make getVersion() check for project name too --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-20 13:39:33 -05:00
Ben Meadors	9cc13e628a	Stubbed out backup / restore methods for now and fixed bug	2025-03-17 19:24:47 -05:00
Ben Meadors	dc100e4d3e	Cleanup	2025-03-16 08:19:46 -05:00
GUVWAF	9893d24c62	Only request all NodeInfo/Position on fresh install (#6184) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-01 06:57:44 -06:00
Ben Meadors	99d3e5eb70	2.6 changes (#5806) ... * 2.6 protos * [create-pull-request] automated change (#5789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Hello world support for UDP broadcasts over the LAN on ESP32 (#5779) * UDP local area network meshing on ESP32 * Logs * Comment * Update UdpMulticastThread.h * Changes * Only use router->send * Make NodeDatabase (and file) independent of DeviceState (#5813) * Make NodeDatabase (and file) independent of DeviceState * 70 * Remove logging statement no longer needed * Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772) * File system persistence fixes * [create-pull-request] automated change (#6000) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update ref * Back to 80 * [create-pull-request] automated change (#6002) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * 2.6 <- Next hop router (#6005) * Initial version of NextHopRouter * Set original hop limit in header flags * Short-circuit to FloodingRouter for broadcasts * If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter * Set last byte to 0xFF if it ended at 0x00 As per an idea of @S5NC * Also update next-hop based on received DM for us * temp * Add 1 retransmission for intermediate hops when using NextHopRouter * Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback * Update protos, store multiple relayers * Remove next-hop update logic from NeighborInfoModule * Fix retransmissions * Improve ACKs for repeated packets and responses * Stop retransmission even if there's not relay node * Revert perhapsRebroadcast() * Remove relayer if we cancel a transmission * Better checking for fallback to flooding * Fix newlines in traceroute print logs * Stop retransmission for original packet * Use relayID * Also when want_ack is set, we should try to retransmit * Fix cppcheck error * Fix 'router' not in scope error * Fix another cppcheck error * Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK Also check for broadcast in `getNextHop()` * Formatting and correct NUM_RETRANSMISSIONS * Update protos * Start retransmissions in NextHopRouter if ReliableRouter didn't do it * Handle repeated/fallback to flooding packets properly First check if it's not still in the TxQueue * Guard against clients setting `next_hop`/`relay_node` * Don't cancel relay if we were the assigned next-hop * Replies (e.g. tapback emoji) are also a valid confirmation of receipt --------- Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> * fix "native" compiler errors/warnings NodeDB.h * fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259) * lib update: light theme * fix merge issue * lib update: home buttons + button try-fix * lib update: icon color fix * lib update: fix instability/crash on notification * update lib: timezone * timezone label * lib update: fix set owner * fix spiLock in RadioLibInterface * add picomputer tft build * picomputer build * fix compiler error std::find() * fix merge * lib update: theme runtime config * lib update: packet logger + T-Deck Plus * lib update: mesh detector * lib update: fix brightness & trackball crash * try-fix less paranoia * sensecap indicator updates * lib update: indicator fix * lib update: statistic & some fixes * lib-update: other T-Deck touch driver * use custom touch driver for Indicator * lower tft task prio * prepare LVGL ST7789 driver * lib update: try-fix audio * Drop received packets from self * Additional decoded packet ignores * Honor flip & color for Heltec T114 and T190 (#4786) * Honor TFT_MESH color if defined for Heltec T114 or T190 * Temporary: point lib_deps at fork of Heltec's ST7789 library For demo only, until ST7789 is merged * Update lib_deps; tidy preprocessor logic * Download debian files after firmware zip * set title for protobufs bump PR (#4792) * set title for version bump PR (#4791) * Enable Dependabot * chore: trunk fmt * fix dependabot syntax (#4795) * fix dependabot syntax * Update dependabot.yml * Update dependabot.yml * Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797) * Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800) * Actions: Semgrep Images have moved from returntocorp to semgrep (#4774) https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved! Official Docker images for Semgrep now available at semgrep/semgrep." Patch updates our CI workflow for these images. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Bump meshtestic from `31ee3d9` to `37245b3` (#4799) Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`. - [Commits](31ee3d90c8...37245b3d61) --- updated-dependencies: - dependency-name: meshtestic dependency-type: direct:production ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * [create-pull-request] automated change (#4789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798) Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4. - [Release notes](https://github.com/pnpm/action-setup/releases) - [Commits](https://github.com/pnpm/action-setup/compare/v2...v4) --- updated-dependencies: - dependency-name: pnpm/action-setup dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Raspberry Pico2 - needs protos * Re-order doDeepSleep (#4802) Make sure PMU sleep takes place before I2C ends * [create-pull-request] automated change * heltec-wireless-bridge requires Proto PR first * feat: trigger class update when protobufs are changed * meshtastic/ is a test suite; protobufs/ contains protobufs; * Update platform-native to pick up portduino crash fix (#4807) * Hopefully extract and commit to meshtastic.github.io * CI fixes * [Board] DIY "t-energy-s3_e22" (#4782) * New variant "t-energy-s3_e22" - Lilygo T-Energy-S3 - NanoVHF "Mesh-v1.06-TTGO-T18" board - Ebyte E22 Series * add board_level = extra * Update variant.h --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> * Consolidate variant build steps (#4806) * poc: consolidate variant build steps * use build-variant action * only checkout once and clean up after run * Revert "Consolidate variant build steps (#4806)" (#4816) This reverts commit 9f8d86cb25. * Make Ublox code more readable (#4727) * Simplify Ublox code Ublox comes in a myriad of versions and settings. Presently our configuration code does a lot of branching based on versions being or not being present. This patch adds version detection earlier in the piece and branches on the set gnssModel instead to create separate setup methods for Ublox 6, Ublox 7/8/9, and Ublox10. Additionally, adds a macro to make the code much shorter and more readable. * Make trunk happy * Make trunk happy --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consider the LoRa header when checking packet length * Minor fix (#4666) * Minor fixes It turns out setting a map value with the index notation causes an lookup that can be avoided with emplace. Apply this to one line in the StoreForward module. Fix also Cppcheck-determined highly minor performance increase by passing gpiochipname as a const reference :) The amount of cycles used on this laptop while learning about these callouts from cppcheck is unlikely to ever be more than the cycles saved by the fixes ;) * Update PortduinoGlue.cpp * Revert "Update classes on protobufs update" (#4824) * Revert "Update classes on protobufs update" * remove quotes to fix trunk. --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Implement optional second I2C bus for NRF52840 Enabled at compile-time if WIRE_INFERFACES_COUNT defined as 2 * Add I2C bus to Heltec T114 header pins SDA: P0.13 SCL: P0.16 Uses bus 1, leaving bus 0 routed to the unpopulated footprint for the RTC (general future-proofing) * Tidier macros * Swap SDA and SCL SDA=P0.16, SCL=P0.13 * Refactor and consolidate time window logic (#4826) * Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Rename message length headers and set payload max to 255 (#4827) * Rename message length headers and set payload max to 255 * Add MESHTASTIC_PKC_OVERHEAD * compare to MESHTASTIC_HEADER_LENGTH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> * Check for null before printing debug (#4835) * fix merge * try-fix crash * lib update: fix neighbors * fix GPIO0 mode after I2S audio * lib update: audio fix * lib update: fixes and improvements * extra * added ILI9342 (from master) * device-ui persistency * review update * fix request, add handled * fix merge issue * fix merge issue * remove newline * remove newlines from debug log * playing with locks; but needs more testing * diy mesh-tab initial files * board definition for mesh-tab (not yet used) * use DISPLAY_SET_RESOLUTION to avoid hw dependency in code * no telemetry for Indicator * 16MB partition for Indicator * 8MB partition for Indicator * stability: add SPI lock before saving via littleFS * dummy for config transfer (#5154) * update indicator (due to compile and linker errors) * remove faulty partition line * fix missing include * update indicator board * update mesh-tab ILI9143 TFT * fix naming * mesh-tab targets * try: disable duplicate locks * fix nodeDB erase loop when free mem returns invalid value (0, -1). * upgrade toolchain for nrf52 to gcc 9.3.1 * try-fix (workaround) T-Deck audio crash * update mesh-tab tft configs * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * update meshtab voltage divider * update mesh-tab ini * Fixed the issue that indicator device uploads via rp2040 serial port in some cases. * Fixed the issue that the touch I2C address definition was not effective. * Fixed the issue that the wifi configuration saved to RAM did not take effect. * rotation fix; added ST7789 3.2" display * dreamcatcher: assign GPIO44 to audio mclk * mesh-tab touch updates * add mesh-tab powersave as default * fix DIO1 wakeup * mesh-tab: enable alert message menu * Streamline board definitions for first tech preview. (#5390) * Streamline board definitions for first tech preview. TBD: Indicator Support * add point-of-checkin * use board/unphone.json --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> * fix native targets * add RadioLib debugging options for (T-Deck) * fix T-Deck build * fix native tft targets for rpi * remove wrong debug defines * t-deck-tft button is handled in device-ui * disable default lightsleep for indicator * Windows Support - Trunk and Platformio (#5397) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 * fix radioLib warnings for T-Deck target * wake screen with button only * use custom touch driver * define wake button for unphone * use board definition for mesh-tab * mesh-tab rotation upside-down * update platform native * use MESH_TAB hardware model definition * radioLib update (fix crash/assert) * reference seeed indicator fix commit arduino-esp32 * Remove unneeded file change :) * disable serial module and tcp socket api for standalone devices (#5591) * disable serial module and tcp socket api for standalone devices * just disable webserver, leave wifi available * disable socket api * mesh-tab: lower I2C touch frequency * log error when packet queue is full * add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * T-Deck: revert back to lovyanGFX touch driver * T-Deck: increase allocated PSRAM by 50% * mesh-tab: streamline target definitions * update RadioLib 7.1.2 * mesh-tab: fix touch rotation 4.0 inch display * Mesh-Tab platformio: 4.0inch: increase SPI frequency to max * mesh-tab: fix rotation for 3.5 IPS capacitive display * mesh-tab: fix rotation for 3.2 IPS capacitive display * restructure device-ui library into sub-directories * preparations for generic DisplayDriverFactory * T-Deck: increase LVGL memory size * update lib * trunk fmt --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> * Version this * Update platformio.ini (#6006) * tested higher speed and it works * Un-extra * Add -tft environments to the ci matrix * Exclude unphone tft for now. Something is wonky * fixed Indicator touch issue (causing IO expander issues), added more RAM * update lib * fixed Indicator touch issue (causing IO expander issues), added more RAM (#6013) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * update device-ui lib * Fix T-Deck SD card detection (#6023) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * fix SDCard for T-Deck; allow SPI frequency config * meshtasticd: Add X11 480x480 preset (#6020) * Littlefs per device * 2.6 update * [create-pull-request] automated change (#6037) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * InkHUD UI for E-Ink (#6034) * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * InkHUD: initial commit (WIP) Publicly discloses the current work in progress. Not ready for use. * feat: battery icon * chore: implement meshtastic/firmware #5454 Clean up some inline functions * feat: menu & settings for "jump to applet" * Remove the beforeRender pattern It hugely complicates things. If we can achieve acceptable performance without it, so much the better. * Remove previous Map Applet Needs re-implementation to work without the beforeRender pattern * refactor: reimplement map applet Doesn't require own position Doesn't require the beforeRender pattern to precalculate; now all-at-once in render Lays groundwork for fixed-size map with custom background image * feat: autoshow Allow user to select which applets (if any) should be automatically brought to foreground when they have new data to display * refactor: tidy-up applet constructors misc. jobs including: - consistent naming - move initializer-list-only constructors to header - give derived applets unique identifiers for MeshModule and OSThread logging * hotfix: autoshow always uses FAST update In future, it *will* often use FAST, but this will be controlled by a WindowManager component which has not yet been written. Hotfixed, in case anybody is attempting to use this development version on their deployed devices. * refactor: bringToForeground no longer requests FAST update In situations where an applet has moved to foreground because of user input, requestUpdate can be manually called, to upgrade to FAST refresh. More permanent solution for #23e1dfc * refactor: extract string storage from ThreadedMessageApplet Separates the code responsible for storing the limited message history, which was previously part of the ThreadedMessageApplet. We're now also using this code to store the "most recent message". Previously, this was stored in the `InkHUD::settings` struct, which was much less space-efficient. We're also now storing the latest DM, laying the foundation for an applet to display only DMs, which will complement the threaded message applet. * fix: text wrapping Attempts to fix a disparity between `Applet::printWrapped` and `Applet::getWrappedTextHeight`, which would occasionally cause a ThreadedMessageApplet message to render "too short", overlapping other text. * fix: purge old constructor This one slipped through the last commit.. * feat: DM Applet Useful in combination with the ThreadedMessageApplets, which don't show DMs * fix: applets shouldn't handle events while deactivated Only one or two applets were actually doing this, but I'm making a habit of having all applets return early from their event handling methods (as good practice), even if those methods are disabled elsewhere (e.g. not observing observable, return false from wantPacket) * refactor: allow requesting update without requesting autoshow Some applets may want to redraw, if they are displayed, but not feel the information is worth being brought to foreground for. Example: ActiveNodesApplet, when purging old nodes from list. * feat: custom "Recently Active" duration Allows users to tailor how long nodes will appear in the "Recents" applets, to suit the activity level of their mesh. * refactor: rename some applets * fix: autoshow * fix: getWrappedTextHeight Remove the "simulate" option from printWrapped; too hard to keep inline with genuine printing (because of AdafruitGFX Fonts' xAdvance, mabye?). Instead of simulating, we printWrapped as normal, and discard pixel output by setting crop. Both methods are similarly inefficient, apparently. * fix: text wrapping in ThreadedMessageApplet Wrong arguments were passed to Applet::printWrapped * feat: notifications for text messages Only shown if current applet does not already display the same info. Autoshow takes priority over notifications, if both would be used to display the same info. * feat: optimize FAST vs FULL updates New UpdateMediator class counts the number of each update type, and suggets which one to use, if the code doesn't already have an explicit prefence. Also performs "maintenance refreshes" unprovoked if display is not given an opportunity to before a FULL refresh through organic use. * chore: update todo list * fix: rare lock-up of buttons * refactor: backlight Replaces the initial proof-of-concept frontlight code for T-Echo Presses less than 5 seconds momentarily illuminate the display Presses longer than 5 seconds latch the light, requiring another tap to disable If user has previously removed the T-Echo's capacitive touch button (some DIY projects), the light is controlled by the on-screen menu. This fallback is used by all T-Echo devices, until a press of the capacitive touch button is detected. * feat: change tile with aux button Applied to VM-E290. Working as is, but a refactor of WindowManager::render is expected shortly, which will also tidy code from this push. * fix: specify out-of-the-box tile assignments Prevents placeholder applet showing on initial boot, for devices which use a mult-tile layout by default (VM-E290) * fix: verify settings version when loading * fix: wrong settings version * refactor: remove unimplemented argument from requestUpdate Specified whether or not to update "async", however the implementation was slightly broken, Applet::requestUpdate is only handled next time WindowManager::runOnce is called. This didn't allow code to actually await an update, which was misleading. * refactor: renaming Applet::render becomes Applet::onRender. Tile::displayedApplet becomes Tile::assignedApplet. New onRender method name allows us to move some of the pre and post render code from WindowManager into new Applet::render method, which will call onRender for us. * refactor: rendering Bit of a tidy-up. No intended change in behavior. * fix: optimize refresh times Shorter wait between retrying update if display was previously busy. Set anticipated update durations closer to observed values. No signifacant performance increase, but does decrease the amount of polling required. * feat: blocking update for E-Ink Option to wait for display update to complete before proceeding. Important when shutting down the device. * refactor: allow system applets to lock rendering Temporarily prevents other applets from rendering. * feat: boot and shutdown screens * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: Bluetooth pairing screen * fix: InkHUD defaults not honored * fix: random Bluetooth pin for NicheGraphics UIs * chore: button interrupts tested * fix: emoji reactions show as blank messages * fix: autoshow and notification triggered by outgoing message * feat: save InkHUD data before reboot Implemented with a new Observable. Previously, config and a few recent messages were saved on shutdown. These were lost if the device rebooted, for example when firmware settings were changed by a client. Now, the InkHUD config and recent messages saved on reboot, the same as during an intentional shutdown. * feat: imperial distances Controlled by the config.display.units setting * fix: hide features which are not yet implemented * refactor: faster rendering Previously, only tiles which requested update were re-rendered. Affected tiles had their region blanked before render, pixel by pixel. Benchmarking revealed that it is significantly faster to memset the framebuffer and redraw all tiles. * refactor: tile ownership Tiles and Applets now maintain a reciprocal link, which is enforced by asserts. Less confusing than the old situation, where an applet and a tile may disagree on their relationship. Empty tiles are now identified by a nullptr *Applet, instead of by having the placeholderApplet assigned. * fix: notifications and battery when menu open Do render notifications in front of menu; don't render battery icon in front of menu. * fix: simpler defaults Don't expose new users to multiplexed applets straight away: make them enable the feature for themselves. * fix: Inputs::TwoButton interrupts, when only one button in use * fix: ensure display update is complete when ESP32 enters light sleep Many panels power down automatically, but some require active intervention from us. If light sleep (ESP32) occurs during a display update, these panels could potentially remain powered on, applying voltage the pixels for an extended period of time, and potentially damaging the display. * fix: honor per-variant user tile limit Set as the default value for InkHUD::settings.userTiles.maxCount in nicheGraphics.h * feat: initial InkHUD support for Wireless Paper v1.1 and VM-E213 * refactor: Heard and Recents Applets Tidier code, significant speed boost. Possibly no noticable change in responsiveness, but rendering now spends much less time blocking execution, which is important for correction functioning of the other firmware components. * refactor: use a common pio base config Easier to make any future PlatformIO config changes * feat: tips Show information that we think the user might find helpful. Some info shown first boot only. Other info shown when / if relevant. * fix: text wrapping for '\n' Previously, the newline was honored, but the adojining word was not printed. * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: observable for reboot * refactor: Heltec VM-E290 installDefaultConfig * fix: random Bluetooth pin for NicheGraphics UIs * update device-ui: fix touch/crash issue while light sleep * Collect inkhud * fix: InkHUD shouldn't nag about timezone (#6040) * Guard eink drivers w/ MESHTASTIC_INCLUDE_NICHE_GRAPHICS * Case sensitive perhaps? * More case-sensitivity instances * Moar * RTC * Yet another case issue! * Sigh... * MUI: BT programming mode (#6046) * allow BT connection with disabled MUI * Update device-ui --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * MUI: fix nag timeout, disable BT programming mode for native (#6052) * allow BT connection with disabled MUI * Update device-ui * MUI: fix nag timeout default and remove programming mode for native --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * remove debuglog leftover * Wireless Paper: remove stray board_level = extra (#6060) Makes sure the InkHUD version gets build into the release zip * Fixed persistence stragglers from NodeDB / Device State divorce (#6059) * Increase `MAX_THREADS` for InkHUD variants with WiFi (#6064) * Licensed usage compliance (#6047) * Prevent psk and legacy admin channel on licensed mode * Move it * Consolidate warning strings * More holes * Device UI submodule bump * Prevent licensed users from rebroadcasting unlicensed traffic (#6068) * Prevent licensed users from rebroadcasting unlicensed traffic * Added method and enum to make user license status more clear * MUI: move UI initialization out of main.cpp and adding lightsleep observer + mutex (#6078) * added device-ui to lightSleep observers for handling graceful sleep; refactoring main.cpp * bump lib version * Update device-ui * unPhone TFT: include into build, enable SD card, increase PSRAM (#6082) * unPhone-tft: include into build, enable SD card, increase assigned PSRAM * lib update * Backup / migrate pub private keys when upgrading to new files in 2.6 (#6096) * Save a backup of pub/private keys before factory reset * Fix licensed mode warning * Unlock spi on else file doesn't exist * Update device-ui * Update protos and device-ui * [create-pull-request] automated change (#6129) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Proto * [create-pull-request] automated change (#6131) * Proto update for backup * [create-pull-request] automated change (#6133) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update protobufs * Space * [create-pull-request] automated change (#6144) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Protos * [create-pull-request] automated change (#6152) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Updeet * device-ui lib update * fix channel OK button * device-lib update: fix settings panel -> no scrolling * device-ui lib: last minute update * defined(SENSECAP_INDICATOR) * MUI hot-fix pub/priv keys * MUI hot-fix username dialog * MUI: BT programming mode button * Update protobufs --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-01 06:18:33 -06:00
Karch	ffe4e7b6be	Add some minor additional options to userPrefs.jsonc (#6137) ... * added some additional userPrefs options * linted * some further changes * fixed some option ordering	2025-02-27 08:57:43 +08:00
Mictronics	598cfcc081	Cast user pref strings. (#6123)	2025-02-27 08:21:03 +08:00
Manuel	9db51a72a4	Fix T-Deck/T-Watch no BT (#5998) ... fixes #5997	2025-02-06 14:11:17 -06:00
Chloe Bethel	d9534cfc9d	Remove unused usages of #include <iostream> to save Flash (#5978) ... Saves ~100KB on wio-e5, which was previously at 99% Flash usage	2025-02-03 11:31:54 +08:00