2183 Commits

Author	SHA1	Message	Date
github-actions[bot]	92511ab10b	[create-pull-request] automated change (#5597) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-12-17 06:33:17 -06:00
Tom Fifield	56002155c6	Based default Node Names on NodeNum, rather than MAC address (#5576) ... Presently we base the default long name (Meshtastic XXXX) and short names (XXXX) on a node's MAC address. This works fine, unless you have a node with no bluetooth, like Portduino. Our logic for node numbers is also based on MAC address. However, it has the added feature that it will create a random node number if the Mac address is no good. The name is always "Meshtastic 0001". This change switches node names (long and short) to instead rely on the node number for defaults. For nodes with mac addresses, there should be no user-visible change. For nodes without, they'll now have a name other than "Meshtastic 0001". Fixes https://github.com/meshtastic/firmware/issues/5370 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-12-15 06:23:27 -06:00
github-actions[bot]	547a57256d	[create-pull-request] automated change (#5577) ... Co-authored-by: fifieldt <1287116+fifieldt@users.noreply.github.com>	2024-12-15 05:23:15 -06:00
Ben Meadors	ea72abff22	Posthumous tronk	2024-12-14 20:21:19 -06:00
Aaron.Lee	4024bfdeeb	Add screen detection function (#5533)	2024-12-14 20:20:29 -06:00
André Perdigão Gonçalves	4a1239f811	Add new endpoint to retrieve node info (#5557)	2024-12-15 11:43:41 +11:00
Jonathan Bennett	92225eb6c3	DIO3_TCXO_VOLTAGE in config.yaml can now take an exact voltage (#5558)	2024-12-13 11:48:27 -06:00
Tom Fifield	03770b799f	Synch minor changes from TFT branch (#5520) ... * Synch minor changes from TFT branch Includes: * New nordicnrf52 minor version (10.5.0 --> 10.6.0) * Optimisations for T_DECK * preparation for MESH_TAB * add ext notification module to portduino --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-12-12 17:42:41 +01:00
Tom Fifield	bac9fec17f	fix nodeDB erase loop when free mem returns invalid value (0, -1). (#5519) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-12-06 18:39:30 -06:00
broglep	de774188c9	Always Announce MDNS meshtastic service (#5503) ... * refactor server api port into define * always announce MDNS meshtastic service	2024-12-05 06:02:10 -06:00
GUVWAF	c3d60342f4	Don't use channel index for encrypted packet (#5509) ... * Don't use channel index for encrypted packet * Remove assert in `getKey`, set invalid key length So encrypting will fail without reboot * Reset channel to 0 when unable to encrypt Such that the NAK doesn't use the failing channel hash	2024-12-05 10:00:19 +08:00
github-actions[bot]	8eca6a2df8	[create-pull-request] automated change (#5500) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-12-04 08:15:50 -06:00
Robert	f846503cbf	Extend Length of Source and Destination Node IDs Logged (#5492) ... * show 8 chars for logging source and destination ids * extend legnth of source and destination nodes in log	2024-12-03 06:30:19 -06:00
dylanli	85b2bad275	Refact the macro definition of GPS initialization of GPSDEFAULTD_NOT_PRESENT and added seeeed Indicator to this sequence (#5494) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-12-03 06:29:33 -06:00
Robert	7ad137b56a	add nodeId to nodeinfo update log lines and removed redundant nodeinfo update log line (#5493)	2024-12-03 06:28:46 -06:00
GUVWAF	57ea6a265e	SimRadio: clean-up and emulate collisions (#5487) ... * Clean up SimRadio and don't let it use PKC * Add collision emulation for SimRadio * Add stats from SimRadio to LocalStats * Make emulating collisions optional	2024-12-03 06:21:24 -06:00
Ben Meadors	d00e0f6911	Convert userprefs to a json file instead of header file which has to be included everywhere (#5471) ... * WIP * Got string quoting and macro expansion working * Need the placeholder * Cleanup * Missed a user prefs reference * Update jsonc	2024-12-03 06:17:25 -06:00
GUVWAF	9f4c8a2804	Update arduino-pico core and remove MDNS restriction (#5483)	2024-11-30 13:16:02 -06:00
Jonathan Bennett	43b8972171	Portduino fixes (#5479) ... * Set config.yaml defaults even if General is missing * Unsigned values should get %u in logging	2024-11-30 11:29:45 +08:00
virgil	060a3bde4d	fix: Solve the lightsleep crash problem via disable lightsleep for indicator. (#5470)	2024-11-28 06:19:18 -06:00
Liam Cottle	601d912c6f	fix cors for meshtasticd to allow use of cross origin clients (#5463)	2024-11-27 09:45:31 +01:00
Ben Meadors	502a83bb8a	Use isWithinTimespanMs to avoid refererence to NodeDb instance inside of NodeDb (#5453)	2024-11-26 16:39:16 -06:00
Ben Meadors	474f9b5bfb	Clean up some inline functions (#5454)	2024-11-26 14:00:10 -06:00
github-actions[bot]	09286a3beb	[create-pull-request] automated change (#5457) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-26 08:32:02 -06:00
github-actions[bot]	4d69159e75	[create-pull-request] automated change (#5431) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2024-11-24 12:29:17 +01:00
Mictronics	dd7140b7a1	Fix admin key loading from userPrefs.h (#5417) ... * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR #420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. * Remove log spam when reading INA voltage sensor. * Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots. * Removed newlines from log. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2024-11-23 09:08:18 -06:00
dylanli	c51a7b98bd	add canned message and keyboard in indicator board (#5410) ... * add canned message and keyboard in indicator board * Added virtual keyboard macro and enabled for Indicator * Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-22 18:54:06 -06:00
GUVWAF	dbc5ec27f7	Temporarily disable MDNS when MQTT is enabled (#5418) ... Leads to a panic	2024-11-21 14:11:50 -06:00
Ben Meadors	2ca3cdf837	Fix RTC time injection and consolidate position logic (#5396) ... * Fix RTC time injection and consolidate position logic * Comment out unused var warning * Backerds	2024-11-20 07:52:39 -06:00
Catalin Patulea	d65dc497f2	/api/v1/fromradio: add OPTIONS handler for CORS. (#5386) ... This avoids hitting the 404 Not Found handler, which breaks connection keep-alive, so this change fixes a big performance regression for Web Client in Chrome: https://github.com/meshtastic/firmware/issues/5385 Tested on Heltec V3. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-19 14:33:44 -06:00
github-actions[bot]	c641bfd53c	[create-pull-request] automated change (#5399) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-19 12:53:54 -06:00
github-actions[bot]	de76caca32	[create-pull-request] automated change (#5388) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-17 19:29:43 -06:00
Michael Gjelsø	89469fcb88	Allows all 3 PKI keys to be added to userPrefs.h (#4969) and a tool. (#5368) ... * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand.	2024-11-17 12:36:41 -06:00
GUVWAF	0d1f9e915f	Move some actions to after startTransmit() (#5383) ... To minimize the time between channel scan and actual transmit	2024-11-17 10:51:01 -06:00
Ben Meadors	1a06f88dfb	Cleanup static files from bad Web UI bundle on 2.5.13 release (#5376) ... * Cleanup static files from bad Web UI bundle on 2.5.13 release * Check existence first * Esp32 is the only one we care about	2024-11-17 07:57:59 -06:00
Ben Meadors	fdc473e5fa	Trunk	2024-11-16 06:01:07 -06:00
Ben Meadors	add70b5229	Rework some things	2024-11-16 05:58:07 -06:00
GUVWAF	9545a10361	RP2040: Update core; add mDNS support (#5355) ... * Update arduino-pico core * RP2040: Add mDNS support * SimpleMDNS `begin` now returns a bool * Add `-g` option to `debug_build_flags` to link files for gdb * RAK11310 needs old platform as well * Change defines to specific architecture * Core version 4.2.1 is out	2024-11-16 08:20:20 +08:00
Michael Gjelsø	d4d89447bd	Adds fixed GPS, BUTTON_PIN and BLE code to userPrefs.h (#5341) ... * userPrefs.h Added FixedGPS Added Fixed Bluetooth PIN * Update NodeDB.cpp Removed some un-used LOG_INFO * Added BUTTON_PIN * Trunk * Variable re-naming. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-14 06:56:22 -06:00
Ben Meadors	ec6949fdc0	Migrate NRF52 devices max nodes down to 80 for now to prevent brownouts (#5346)	2024-11-13 18:44:35 -06:00
Ben Meadors	3a66c738bd	Revert "Decrease max nodes for NRF52 to 80 as workaround to prevent FS blowou…" (#5340) ... This reverts commit ea150c32f3.	2024-11-13 10:21:55 -06:00
Ben Meadors	ea150c32f3	Decrease max nodes for NRF52 to 80 as workaround to prevent FS blowouts (#5338) ... * Decrease max nodes for NRF52 to 80 as workaround to prevent FS blowouts * Don't redefine * Newline	2024-11-13 07:43:05 -06:00
GUVWAF	e866734a25	Handle repeated packet after potentially canceling previous Tx (#5330) ... * Revert "Fix sending duplicate packets to PhoneAPI/MQTT (#5315)" This reverts commit 40bc04b521. * Handle repeated packet after potentially canceling previous Tx	2024-11-12 15:23:32 -06:00
Matthijs De Smedt	2ec3958cd8	Add support for ignoring nodes with is_ignored field in NodeInfo (#5319) ... * Add support for is_ignored bool in NodeInfo * is_ignored is not a boring node either * Clean out metrics and position * Clear the key too --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-12 13:27:44 -06:00
GUVWAF	f4b0e19a65	Fix another heap leak (#5328)	2024-11-12 10:59:29 -06:00
github-actions[bot]	0e4f7003c7	[create-pull-request] automated change (#5320) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-11 18:55:02 -06:00
GUVWAF	40bc04b521	Fix sending duplicate packets to PhoneAPI/MQTT (#5315) ... * Fix potential duplicate packets to PhoneAPI/MQTT * Fix include error for STM32 * Fix cppcheck error	2024-11-12 07:54:05 +08:00
Ben Meadors	3d5eb34c5c	Add back some details to the PhoneAPI logs (#5313)	2024-11-11 07:01:29 -06:00
Ben Meadors	3a9a4bbb92	Coerce minimum neighborinfo interval on startup (#5314)	2024-11-11 07:00:56 -06:00
Daniel.Cao	6eba2789d0	rak10701 (rak wismeshtap) optimization (#5280) ... * Improve the processing speed of virtual keyboards * Remove the disable GPS feature, as it would interfere with the normal use of TFT * Changed the default screen sleep time to 30s * Rename platform rak10701 -> rak wismeshtap * Fixed rak wismeshtap turned off gps caused the screen not to display * Reduce the size of the flash, otherwise uf2 will not work Co-authored-by: Daniel Cao <daniel.cao@rakwireless.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-11 13:37:43 +01:00
Tom Fifield	623203ca3b	Remove scary warning about full NodeDB (#5292) ... NodeDB becoming full at 100 entries and cycling out old entries is normal behaviour. The user doesn't need to take any action and shouldn't be concerned when this happens. Remove the warning from the screen and reduce loglevel to info.	2024-11-09 07:30:04 -06:00
GUVWAF	893efe4f11	Always set the channel corresponding to a node (#5287)	2024-11-09 11:30:12 +08:00
GUVWAF	2c2213ef9b	Add setting to transmit NeighborInfo over LoRa (#5286) ... * Add setting to transmit NeighborInfo over LoRa Only if not using the default channel * Bump minimum broadcast interval for NeighborInfo to 4 hours	2024-11-09 09:38:48 +08:00
github-actions[bot]	439c1dec08	[create-pull-request] automated change (#5284) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-08 07:53:55 -06:00
Austin	286f3c6458	uClibc compatibility (#5270) ... * uclibc compatibility Adds compatibility with uclibc, the officially supported toolchain of the luckfox pico * Explicitly link stdc++fs for std::filesystem Bringing this over from buildroot-meshtastic	2024-11-07 14:23:08 +01:00
github-actions[bot]	b506f6dcb0	[create-pull-request] automated change (#5272) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-07 07:17:23 -06:00
Ben Meadors	73e2e25eb1	Smarter traffic scaling (#5264)	2024-11-06 15:00:53 -06:00
GUVWAF	3bd3911913	Only PKC encrypt when packet originates from us (#5267)	2024-11-06 22:00:26 +01:00
Ben Meadors	982190936d	More log reductions. I'll probably stop now ;-) (#5263)	2024-11-06 21:03:25 +08:00
Ben Meadors	f769c50fa5	More reduction (#5256) ... * Now with even fewer ings * Ye * Mo * QMA6100PSensor	2024-11-04 19:15:59 -06:00
GUVWAF	7ba6d97e99	Release no-LoRa packet after sending to phone (#5254)	2024-11-04 14:13:54 -06:00
GUVWAF	f3b698905d	Disable automatic NodeInfo request when NodeDB is full (#5255)	2024-11-04 14:06:12 -06:00
Ben Meadors	50dac38a1b	Pass#2: Lots more savings in logs and string reduction surgery (#5251) ... * Pass#2: Lots more savings in logs and string reduction surgery * Don't need Thread suffix either * Warn	2024-11-04 12:16:25 -06:00
Tom Fifield	276067065e	Log cleanups (#5135) ... * Log cleanups change log levels, shorten log messages, delete commented out logs * Address comments from review * Remove full stops * EDEBUG --> DEBUG	2024-11-04 06:09:23 -06:00
github-actions[bot]	a628c93125	[create-pull-request] automated change (#5247) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-04 05:40:55 -06:00
Ben Meadors	03aaaafa13	Exclude preferred routing roles from nodeinfo interrogation behavior (#5242) ... * Exclude prefered routing roles from nodeinfo interrogation behavior * Exclude prefered routing roles from nodeinfo interrogation behavior * Update MeshService.cpp * Rework logic to prevent spammy router logs	2024-11-04 19:05:03 +08:00
Thomas Göttgens	0a82fd28b3	PIO_ENV (#5239) ... * add hw_env to packet needs https://github.com/meshtastic/protobufs/pull/616 * rename to pio_env * Move to mynodeinfo * Includy doody --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-03 20:02:13 -06:00
github-actions[bot]	89c186e662	[create-pull-request] automated change (#5243) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-03 19:48:50 -06:00
github-actions[bot]	8c99f913c1	[create-pull-request] automated change (#5241) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-03 16:18:38 -06:00
Austin	9415254dda	musl compatibility (#5219) ... * musl compat * trunk fmt * Update platform-native, including musl fix https://github.com/meshtastic/platform-native/pull/5 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-03 14:24:04 +01:00
Tom Fifield	448c754882	LR1110 - remove old comment referring to non-existent function. (#5233) ... It seems like there was no setrxgain function in RadioLib. Since we're unlikely to uncomment and enable this non-existent feature, remove this code.	2024-11-03 14:14:06 +01:00
GUVWAF	da7424a604	Improve ACK logic for responses and repeated packets (#5232) ... * Don't send ACKs to responses over multiple hops * Move repeated sending logic to `wasSeenRecently()` * Add exception for simulator for duplicate packets from PhoneAPI * Add short debug message	2024-11-03 06:21:45 -06:00
Technologyman00	bee474ee54	Spell check all Code (#5228) ... * Spelling Fixes * More Spelling Errors * More Spelling Checks * fixed wording * Undo mesh\generated changes * Missed one file on readd * missed second file	2024-11-03 09:25:05 +08:00
github-actions[bot]	8801bc5ce9	[create-pull-request] automated change (#5223) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-02 05:58:06 -05:00
Jonathan Bennett	cf476eb87c	Remove assert in mesh-pb-constants.cpp (#5207) ... * Remove assert in mesh-pb-constants.cpp * Add raw packet output to portduino trace logging. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-02 05:38:44 -05:00
GUVWAF	2d4d36c605	Drop oldest packet from radio when queue is full (#5212) ... And still notify Router Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-01 15:48:55 -05:00
Ben Meadors	cbe74009a9	Comment out unused var to get rid of warning	2024-11-01 15:46:11 -05:00
Ben Meadors	a1ac358b0a	Don't try to count non-lora transmissions into airtime (or attempt to decode) (#5215) ... * Don't try to count non-lora transmissions into airtime (or attempt to decode) * Don't need to check utilization anymore	2024-11-01 13:20:11 -05:00
Ben Meadors	5f6e19d971	As a Router	2024-10-30 06:02:59 -05:00
Jonathan Bennett	b3ba23b4e8	Don't generate or populate PKC keys in licensed mode	2024-10-29 14:17:14 -05:00
Ben Meadors	936260fca3	Default rebroadcast mode for Router and Repeater to ignore problematic portnums (#5178) ... * Default rebroadcast mode for Router and Repeater to ignore problematic portnums * Verbiage * IS_ONE_OF	2024-10-29 05:44:32 -05:00
github-actions[bot]	c4eb9a6d7f	[create-pull-request] automated change (#5176) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-28 06:16:06 -05:00
mverch67	94ff67e927	fix spiLock in RadioLibInterface	2024-10-27 10:55:23 +01:00
mverch67	a8bd1ee0da	stability: add SPI lock before saving via littleFS	2024-10-26 16:01:46 +02:00
github-actions[bot]	2568d4fcd8	[create-pull-request] automated change (#5153) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2024-10-26 15:51:28 +02:00
github-actions[bot]	6485f037ec	[create-pull-request] automated change (#5133) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-23 21:21:49 -05:00
Ben Meadors	ca5f71f774	Add device unique id (#5092) ... * Add device unique id * Trunk * WIP * Esp32 implementation * Trunk * Check for ESP_EFUSE_OPTIONAL_UNIQUE_ID * Comment print * Trunk	2024-10-23 21:18:37 -05:00
panaceya	57667f1028	ADD: Configurable UPLINK_ENABLED and DOWNLINK_ENABLED in userPrefs.h (#5120)	2024-10-23 05:26:44 -05:00
github-actions[bot]	4416ac57cf	[create-pull-request] automated change (#5124) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-21 16:06:56 -05:00
Thomas Göttgens	18ca5b4449	Wide_Lora uses 12 symbols to be compatible with SX1280	2024-10-20 21:54:07 +02:00
Ben Meadors	4575352d8c	Initial NODENUM_BROADCAST_NO_LORA implementation with NeighborInfo module (#5087) ... * Initial NODENUM_BROADCAST_NO_LORA implementation with NeighborInfo module * isBroadcast * Trunkt	2024-10-19 12:48:00 -05:00
github-actions[bot]	b8b6894d58	[create-pull-request] automated change (#5091) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-18 06:00:55 -05:00
Ben Meadors	ec9e562a77	Coerce minimum telemetry interval of 30 minutes on defaults and make new default interval one hour (#5086) ... * Coerce minimum telemetry interval of 30 minutes on defaults and make new default interval one hour * Smaller log messages	2024-10-17 13:33:52 -05:00
Andre K	af0db8a29f	retain fixed_position during reset-nodedb (#5067)	2024-10-14 19:32:25 -05:00
Ben Meadors	420ab89f8d	Merge branch 'master' into oem-proto	2024-10-14 14:10:31 -05:00
github-actions[bot]	1212969ff7	[create-pull-request] automated change (#5062) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-14 14:10:19 -05:00
Thomas Göttgens	e49e584ae1	drop oem.proto support in favor of userprefs	2024-10-14 19:39:07 +02:00
github-actions[bot]	655e58f424	[create-pull-request] automated change (#5058) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-14 07:49:58 -05:00
Thomas Göttgens	05e4a639a1	remove newline from logging statements. (#5022) ... remove newline from logging statements in code. The LOG_* functions will now magically add it at the end. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-14 15:11:43 +11:00
Ben Meadors	fb9f361052	Implement rebroadcast mode NONE (#5040) ... * Implement rebroadcast mode none * Correct debug message	2024-10-12 06:17:44 -05:00
github-actions[bot]	9d0729c83f	[create-pull-request] automated change (#5034) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-11 06:29:30 -05:00
Ben Meadors	1f2d972e18	Remove waypoint and text message frames on NodeDB reset as well (#5029)	2024-10-10 19:24:37 -05:00
github-actions[bot]	cc87002a8a	[create-pull-request] automated change (#5028) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-10 18:31:20 -05:00
GUVWAF	d55c08d5cd	Uplink DMs not to us if MQTT encryption enabled (#5025) ... * Uplink DMs not to us if MQTT encryption enabled * Only really need to try uplinking encrypted packet if MQTT encryption is enabled * Add log about publishing nothing when packet is not decrypted and encryption_enabled is false * Improve comment	2024-10-10 15:11:58 -05:00
Ben Meadors	e8f287a36f	Fixes critical error rendering before screen thread is running (#5024) ... * Fixes critical error rendering before screen thread is running * Fix GPS thread crashing on probe code attempting to %s print an enum * 10	2024-10-10 14:58:42 -05:00
Ben Meadors	f5f9fd54a1	Revert "[create-pull-request] automated change (#5019)" (#5026) ... This reverts commit 3b21856a76.	2024-10-10 14:58:06 -05:00
github-actions[bot]	3b21856a76	[create-pull-request] automated change (#5019) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-10 06:45:22 -05:00
Jonathan Bennett	7ff4bafe22	Disentangle NodeDB from the CryptoEngine (#5013)	2024-10-10 18:14:11 +08:00
Jonathan Bennett	ad8747d914	Possibly forward PKC DMs over MQTT (#5012)	2024-10-09 17:56:08 -05:00
GUVWAF	ddd4a45bc3	Ignore packets coming from the broadcast address (#4998)	2024-10-09 11:59:00 +08:00
Thomas Göttgens	4f8f96ab29	preliminary Othernet Dreamcatcher Support (#4933) ... * preliminary Othernet Dreamcatcher 2206 Support Need to adapt to 2301 final version * second target for latest revision * preliminary Othernet Dreamcatcher 2206 Support Need to adapt to 2301 final version * second target for latest revision * preliminary Othernet Dreamcatcher 2206 Support Need to adapt to 2301 final version * second target for latest revision * address comments --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-10-08 07:05:13 -05:00
Ben Meadors	a05b009379	Posthumous tronkination	2024-10-08 05:33:38 -05:00
Ben Meadors	411aedaf5d	Add health telemetry module (#4927) ... * Add stub health telemetry module * Add detection for MAX30102 Health Sensor It lives on I2C bus at 0x57, which conflicts with an existing sensor. Add code to check the PARTID register for its response 0x15 per spec. * Add detection for MLX90614 An IR Temperature sensor suitable for livestock monitoring. * Add libraries for MLX90614 and MAX30102 sensors * Fix Trunk * Add support for MLX90614 IR Temperature Sensor * Add support for MAX30102 (Temperature) * Make it build - our first HealthTelemetry on the mesh. If a MAX30102 is connected, its temperature will be sent to the mesh as HealthTelemetry. * Add spo2 and heart rate calculations to MAX30102 * Switch MLX90614 to Adafruit library Sparkfun was having fun with SDA/SCL variables which we can avoid by switching to this highly similar library. * Enable HealthTelemetry if MLX90614 detected * Change MLX90614 emissivity for human skin. * Add health screen! * Remove autogenerated file from branch * Preparing for review * Fix MeshService master sync from before. * Prepare for review * For the americans * Fix native build * Fix for devices with no screen * Remove extra log causing issues --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-10-07 19:50:44 -05:00
Mictronics	94ecbad904	Fix storage of admin key when installing default config. (#4995) ... * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR #420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-07 12:44:21 -05:00
Ben Meadors	53f189fff4	Remove has_rx * on installDefaultDeviceState (#4982)	2024-10-07 19:43:55 +08:00
Tom Fifield	234a56446b	Add frequencies for Philippines (#4951) ... There are three different frequencies available for Meshtastic in the Philippines, each with pros and cons: 433 - 434.7 MHz <10 mW erp 868 - 869.4 MHz <25 mW erp 915 - 918 MHz <250 mW EIRP, no external antennna allowed Philippines may also use LORA_24 unrestricted at up to 10mW, or up to 250mW if there is no external antennna. Frequency rules in the Philippines are determined by aggregating the information in laws, following the circulars referenced in the [National Radio Frequency Allocation Table (NRFAT)](https://ntc.gov.ph/wp-content/uploads/2022/frequencyallocations/NRFAT_Rev_2020.pdf) and then circulars that amend the circulars referenced in the NRFAT. A full description of the regulatory basis can be found in the github issue: https://github.com/meshtastic/firmware/issues/4948#issuecomment-2394926135 For 433MHz and 868MHz we refer to the Low Power Equipment rules for "Non-specific Short Range Devices, Telemetry, Telecommand, Alarms, Data In General and Other Similar Applications.". For 915MHz and Wireless Data Network Services indoor device rules. A device approved by the NTC is required for any use of Meshtastic in the Philippines. fixes https://github.com/meshtastic/firmware/issues/4948 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-06 09:31:13 -05:00
github-actions[bot]	830281803f	[create-pull-request] automated change (#4974) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-06 08:14:03 -05:00
github-actions[bot]	ad031dd69f	[create-pull-request] automated change (#4971) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-06 07:28:05 -05:00
Tom Fifield	ebc3a66d10	Which Module wants a UI Frame? (#4967) ... Previously our debug message for screens blandly stated "Module wants a UI Frame" This patch replaces the word Module with the name of the Module in need of a frame a frame, enhancing debugging ability.	2024-10-06 06:40:23 -05:00
Tom Fifield	553e572eb5	Coalesce duplicated method GetTimeSinceMeshPacket (#4968) ... GetTimeSinceMeshPacket was duplicated in PowerTelemetry and EnvironmentalTelemetry, albeit one had a cooler name than the other. As we add HealthTelemetry, to avoid creating a third instance of this method, let's move it somewhere that makese sense. Adds a new method GetTimeSinceMeshPacket to MeshService and updates EnvironmentTelemetry and PowerTelemetry to use it.	2024-10-06 06:40:06 -05:00
medentem	0952d1b252	UserPrefs - Preconfigure up to 3 channels, GPS Mode (#4930) ... * added up to 3 channels via userprefs * added up to 3 channels via userprefs * added up to 3 channels via userprefs * trunk fmt * Added USERPREFS for GPS MODE	2024-10-06 15:32:07 +08:00
Jonathan Bennett	7e946d15ca	Move ifndef to fix test (#4950)	2024-10-04 22:59:00 -05:00
Ludovic BOUÉ	e7cfadacd8	Add Panel_ILI9342 to TFTDisplay.cpp (#4822) ... * Add Panel_ILI9342 to TFTDisplay.cpp [Panel_ILI9342](https://github.com/lovyan03/LovyanGFX/blob/master/src/lgfx/v1/panel/Panel_ILI9342.hpp) * Add ILI9342_DRIVER to TFTDisplay.cpp * Add ILI9342_DRIVER to Screen.cpp * Add ILI9342_DRIVER to ScreenFonts.h * Add ILI9342_DRIVER to main.cpp * Add ILI9342_DRIVER to images.h * Add ILI9342_DRIVER to NodeDB.cpp * Add ILI9342 to PortduinoGlue.cpp * Add ili9342 to PortduinoGlue.h * Fix formatting * Update Screen.cpp to add ILI9342_DRIVER * Update TFTDisplay.cpp * Update TFTDisplay.cpp * Update Screen.cpp * Update Screen.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-10-04 07:47:14 -05:00
GUVWAF	673fe294f3	Add rxDupe, txRelay and txRelayCanceled to LocalStats (#4936) ... * Introduce `isFromUs()` and `isToUs()` * Add rxDupe, txRelay and txRelayCanceled to LocalStats	2024-10-04 06:28:51 -05:00
github-actions[bot]	b2b60eccdb	[create-pull-request] automated change (#4937) ... Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>	2024-10-03 14:54:18 -05:00
github-actions[bot]	0a93261c06	[create-pull-request] automated change (#4926) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-02 06:14:55 -05:00
Ben Meadors	00f15459ec	Userprefs prefix macros for clarity and consistency (#4923) ... * Convert userprefs macros to prefixed ones for clarity * Fix key	2024-10-02 06:14:24 -05:00
Ben Meadors	18f12584ab	Consolidate and shrink down the re-used strings in logs (#4907) ... * Consolidate and shrink down the re-used strings in GPS * Condense all the things --------- Co-authored-by: GUVWAF <thijs@havinga.eu>	2024-10-01 15:38:36 -05:00
Thomas Göttgens	0d175a918c	misc library updates and compiler warnings, trunk upgrade	2024-10-01 16:02:10 +02:00
Ben Meadors	dc55d7dd98	Trunk it	2024-09-30 18:07:11 -05:00
TheMalkavien	553514e3b7	Fix #4911 : Partially rework some code to remove warnings about potential non-aligned memory accesses (#4912) ... * * Adding the -Wcast-align compilation flag for the rp2040. * * Some rework to use a struct to access radio data * Buffer will not be accessed by arithmetic pointer anymore * * Remplace arithmetic pointer to avoid Warning * * Avoid 2 little artitmetic pointer --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-30 17:56:29 -05:00
github-actions[bot]	1dace9a508	[create-pull-request] automated change (#4917) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-30 17:35:35 -05:00
Jonathan Bennett	dd587419c7	Regenerate public key on boot, to avoid accidental mismatch. (#4916) ... * Regenerate public key on boot, to avoid accidental mismatch. * Fix ifdefs	2024-09-30 17:06:31 -05:00
Ben Meadors	8ad89ba724	Allow for better target level Radiolib exclude plumbing (#4906) ... * WIP * LR11x0 * Anothern * =1	2024-09-30 05:14:22 -05:00
Ben Meadors	dcb2707d94	Return queue status on rate limit throttling (#4901)	2024-09-29 07:28:20 -05:00
Thomas Göttgens	7289f36600	Merge branch 'master' into t3s3-1121	2024-09-28 17:51:21 +02:00
Thomas Göttgens	06dab4fa13	Don't process RX when region unset	2024-09-28 16:27:38 +02:00
GUVWAF	12efedec42	Potential fix for bad Rx performance on T1000-E (#4885) ... * Potential fix for bad Rx performance on T1000-E * validate and refactor RF switching, eliminate godmode --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2024-09-28 09:24:13 -05:00
Thomas Göttgens	f3213a5b2f	Merge branch 'master' into esp32-c6	2024-09-28 13:39:55 +02:00
caveman99	f28f5e07b7	[create-pull-request] automated change	2024-09-28 11:38:10 +00:00
Thomas Göttgens	62c306a14b	Merge branch 'master' into esp32-c6	2024-09-28 12:33:50 +02:00
Thomas Göttgens	016e1005df	Merge branch 'master' into t3s3-1121	2024-09-28 11:37:42 +02:00
Jonathan Bennett	6e1aa52723	More store-n-forward on native	2024-09-28 11:37:27 +02:00
David Huang	36a66df923	Don't log "Setting DIO2 as RF switch" unless we're actually going to do it. Also, if there's an error setting DIO2, log the error code.	2024-09-27 21:53:13 -05:00
Ben Meadors	8efc15f4d9	Ignore seen phoneapi packets (#4888) ... * Ignore PhoneAPI packet if it's been seen * ignoramus * Also keep track of the last 20 packet IDs * Fill * Make this match the nimble one * Add the log too * Ignore zero ID packets * Remove message entirely * TRunkt	2024-09-27 20:09:53 -05:00
Jonathan Bennett	fd1b68513a	Add sx126x_ant_sw for Native (#4887) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-27 19:29:44 -05:00
Thomas Göttgens	cb1cf055b1	Merge branch 'master' into esp32-c6	2024-09-27 22:51:29 +02:00
Thomas Göttgens	6c2e60d415	Merge branch 'master' into t3s3-1121	2024-09-27 22:22:42 +02:00
Ben Meadors	30356dcd97	Retroactive trunkinate	2024-09-26 19:46:17 -05:00
Jonathan Bennett	5f6d9c3e27	Add pkc test (#4878) ... * Add a second delay() to get the unit tests running on Rak4631 * Add test_PKC_Decrypt * Remove cruft from test case	2024-09-26 19:33:08 -05:00
TheMalkavien	4794cdb120	Fix (some ?) memory alignment issues on the crypto part - resulting in crashes or strange behavior (#4867) ... * Replace multiple potentially non aligned pointer dereference (#4855) First step to fix some Crypto crashes or strange behaviors * Makes the two Crypto byte buffers aligned (#4855) Fix #4855, and probably multiple Crypto problems depending on hardware --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>	2024-09-26 17:44:11 -05:00
Thomas Göttgens	fff2e435b5	Merge branch 'master' into t3s3-1121	2024-09-26 12:13:45 +02:00
Thomas Göttgens	11c17ec78c	oh well	2024-09-26 11:39:35 +02:00
Thomas Göttgens	b4bdf604f5	tryfix	2024-09-26 11:08:49 +02:00
Thomas Göttgens	833d7f65bc	fix toolchains between old and new ESP32	2024-09-26 10:18:45 +02:00
Thomas Göttgens	12481b568a	fix a lot of nuisances reported by cppcheck (#4872) ... * fix a lot of nuisances reported by cppcheck * fix portduino	2024-09-25 19:09:06 -05:00
Thomas Göttgens	3072b2a444	Merge branch 'master' into esp32-c6	2024-09-26 00:20:00 +02:00
Thomas Göttgens	5c77e29d66	Merge branch 'master' into t3s3-1121	2024-09-26 00:17:41 +02:00
Ben Meadors	baf9cf5a59	Encapsulate RadioLibInterface receive IRQ logic (#4866) ... * Encapsulate RadioLibInterface receive IRQ logic * More concise * Trunk	2024-09-25 16:19:18 -05:00
Ben Meadors	4128d75ad4	IS_ONE_OF macro to make long chains of conditions more concise and easy to follow (#4860) ... * Is one of macro * Moar * Whoops * Trunk * isOneOf function backed macro	2024-09-25 13:50:00 -05:00
Thomas Göttgens	26112ba001	Support T3S3 LR1121 variant	2024-09-25 18:56:17 +02:00
Ben Meadors	a7c379961a	New detection sensor trigger type value	2024-09-25 07:01:15 -05:00
todd-herbert	d1138d51e5	Wrangle module frames with I2C keyboard (#4817) ... * Only suppress UI nav if module using keyboard input * CardKB combo to dismiss text message and waypoint Currently assigned to Fn + Delete	2024-09-25 06:27:04 -05:00
github-actions[bot]	9d7938f570	[create-pull-request] automated change (#4865) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-25 06:25:56 -05:00
caveman99	f73aa8aa82	[create-pull-request] automated change	2024-09-25 08:28:33 +00:00
Ben Meadors	0ad1f776ae	Manually regen protos for now	2024-09-23 18:53:01 -05:00
Ben Meadors	9cbabb0468	Teardown bluetooth phoneAPI better and fix client notification issue (#4834) ... * Teardown bluetooth phoneAPI better and fix client notification issue * Fix client notification draining	2024-09-23 15:51:05 -05:00
Jonathan Bennett	9a7a4d3814	Check for null before printing debug (#4835)	2024-09-23 13:56:26 -05:00
Jonathan Bennett	fa1cc59841	Rename message length headers and set payload max to 255 (#4827) ... * Rename message length headers and set payload max to 255 * Add MESHTASTIC_PKC_OVERHEAD * compare to MESHTASTIC_HEADER_LENGTH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2024-09-23 09:20:32 -05:00
Ben Meadors	e8829b8f52	Refactor and consolidate time window logic (#4826) ... * Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-09-23 08:58:14 -05:00
Jonathan Bennett	18aac0ba25	Consider the LoRa header when checking packet length	2024-09-22 16:09:46 -05:00
thebentern	f324ab7de7	[create-pull-request] automated change	2024-09-21 15:16:31 +02:00
Thomas Göttgens	6ffdc9875b	First stab at ESP32-C6 support for TLora-C6	2024-09-20 19:37:47 +02:00
github-actions[bot]	deada41cee	[create-pull-request] automated change (#4765) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-18 10:49:12 -05:00
Ben Meadors	777bcf691a	Initial PhoneAPI rate-limiting of messages on certain ports (#4756)	2024-09-18 10:13:07 -05:00
github-actions[bot]	923458bc18	[create-pull-request] automated change (#4754) ... Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2024-09-17 17:55:16 -05:00
Ben Meadors	50fb4ab22a	Implement optional hops_away on NodeInfo/Lite (#4747) ... * Implement optional hops_away on NodeInfo/Lite * Trunk	2024-09-17 12:08:04 -05:00
Thomas Göttgens	f5016763fd	change evaluation order to silence warning about "found" (#4749)	2024-09-17 10:33:21 -05:00
github-actions[bot]	a47570d65a	[create-pull-request] automated change (#4746) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-17 06:52:42 -05:00
Jonathan Bennett	a967dd52f3	More useful PKC logging (#4742)	2024-09-17 06:31:39 -05:00
Thomas Göttgens	4b5bcf52d2	Merge pull request #4691 from S5NC/rak11200-pin-name-correction ... Rak11200 pin name correction	2024-09-17 11:42:40 +02:00
Thomas Göttgens	bc753e6903	trunk fmt	2024-09-17 15:24:11 +08:00
S5NC	06cd9abd81	Update SX126xInterface.cpp	2024-09-17 15:24:11 +08:00
jp-bennett	39c90dd581	[create-pull-request] automated change	2024-09-17 02:53:44 +00:00
github-actions[bot]	f37276d5fc	[create-pull-request] automated change (#4736) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-16 10:32:21 -05:00
Jonathan Bennett	ff8baa1c85	Don't use PKC on a non-primary channel unless specifically requested (#4715) ... * Don't use PKC on a non-primary channel unless specifically requested * Don't change from channel 0 if we can send a PKC packet.	2024-09-15 09:26:43 -05:00
Ben Meadors	9ac0e26d42	Add option to preserve private key for factory reset (config) (#4679) ... * Add option to preserve private key for factory reset (config) * Typo fix * Copy the key in the right direction, and set the size. * Don't set the key size back to 0 right after setting it to 32. * Set the key size before using it to do a memcpy. * Use the right key_size for backing up private_key * Don't factoryReset() for a missing nodeDB * Disable Bluetooth in AdminModule when resetting device settings or nodeDB to avoid race * Add checks for valid objects before deinit bluetooth * Add disableBluetooth to handleSetConfig, handleSetModuleConfig, and commit settings --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2024-09-11 08:42:26 -05:00
Jonathan Bennett	4e850296b6	Fix repeatedly getting new NodeNum and add more debug (#4674) ... * All the debug * Change `memccpy()` to `memcpy()` * Brint all the bytes of the MAC Address from the NodeDB * Check for blank MAC Address in ourown NodeDB entry * One more `memccpy()` * Clean-up debug log --------- Co-authored-by: GUVWAF <thijs@havinga.eu>	2024-09-10 13:24:57 -05:00
GUVWAF	4ed12bf21d	Try fix repeatedly getting a new NodeNum (#4670)	2024-09-09 14:22:32 -05:00
Jonathan Bennett	bf34329033	Adds the data bitfield and ok_to_mqtt bit (#4643) ... * Don't filter PKI packets just for being encrypted. * Add ok_to_mqtt config and bit * Bitfield * Adjust dontmqttmebro logic. * Manipulate bitfield only in router.cpp * Want_ack is not want_response * Bitfield macros * Use new Bitfield macro in MQTT.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-07 18:21:59 -05:00
github-actions[bot]	c77b89d85c	[create-pull-request] automated change (#4645)	2024-09-06 18:51:22 -05:00
caveman99	b8cee51e84	[create-pull-request] automated change	2024-09-06 20:27:28 +00:00
Thomas Göttgens	35b47467c7	Merge pull request #4639 from zerolint/master ... RAK13800 Ethernet improvements	2024-09-06 15:11:10 +02:00
Thomas Göttgens	8f35a42f4f	tryfix #4384 (#4642) ... * tryfix #4384 - don't assume we want that functionality if the Accelerometer was found. This is only for T-Watch * Add config.display.wake_on_tap_or_motion default to RAK --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-06 06:55:56 -05:00
zerolint	d72a836e07	RAK13800 Ethernet improvements ... Fixes (#3618) by allowing more time for slower requests. Resolve Syslog not maintaining client causing issues on RAK13800. Resolve Ethernet static IP setting subnet as gateway IP. Reduce comment and log message ambiguity around API. Remove duplicate #if !MESHTASTIC_EXCLUDE_WEBSERVER block.	2024-09-06 11:45:43 +02:00
Thomas Göttgens	011e640e95	Add LR11x0 firmware version to init.	2024-09-06 09:47:43 +02:00
Thomas Göttgens	7c6454f171	bring 2.4G back in line with preset bandwidth (#4634)	2024-09-05 15:49:08 -05:00
gitbisector	bb9ddcf2b5	Same priority packets processed in enqueue order (#4608) ... * Same priority packets processed in enqueue order * Prefer same prio pkts on mesh over new ones. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-04 08:31:30 -05:00
Thomas Göttgens	ff40a3f120	fix RF switch for Tracker E (#4621) ... * fix RF switch for Tracker E * fix all flags for Radiolib * hopefully fix LR1110 * update to latest radiolib master - thanks @GUVWAF	2024-09-03 14:21:40 -05:00
Thomas Göttgens	6fc4a1754b	Radiolib API Changes	2024-09-03 13:12:39 +02:00
Thomas Göttgens	f9e513f4fd	Merge branch 'Tracker-1000E' of github.com:meshtastic/firmware into Tracker-1000E ... # Conflicts: # src/mesh/LR11x0Interface.cpp	2024-09-03 09:59:44 +02:00
Thomas Göttgens	7dad2286e2	trunk fmt	2024-09-03 09:58:27 +02:00
Thomas Göttgens	8598645931	- use setRfSwitchTable ... - ditch Godmode - fixes Signedness Error in Loop. - add V3 factory erase for 7.3.0 softdevice	2024-09-03 09:26:41 +02:00
Ben Meadors	b526a3ad53	Own node should be favorited and have zero hops away (#4618)	2024-09-02 17:51:02 -05:00
Thomas Göttgens	2f0c19ebea	- use setRfSwitchTable ... - ditch Godmode - fixes Signedness Error in Loop. - add V3 factory erase for 7.3.0 softdevice	2024-09-02 15:06:06 +02:00
GUVWAF	56223710b5	More priorities for different types of MeshPackets (#4606)	2024-09-01 10:29:53 -05:00
github-actions[bot]	e45a358de0	[create-pull-request] automated change (#4594) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-01 09:20:10 -05:00
Jonathan Bennett	b71e12c5e5	Phone admin work (#4599) ... * Don't throw an error on the sessionkey admin tag * Throw an error on packet sent to 0	2024-08-31 15:04:35 -05:00
GUVWAF	eb071ec80d	Set high priority for text messages (#4592)	2024-08-30 14:54:44 -05:00
github-actions[bot]	8144dcbc25	[create-pull-request] automated change (#4591) ... Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>	2024-08-30 13:46:51 -05:00
Manuel	6a24566efb	Lilygo T3S3 E-Paper support (#4569) ... * t3s3 e-paper support * remove GPS autodetect (which leads to crashes during startup when no GPS present) * update EINK defines * keep definitions for external GPS connector but disable GPS auto scan by default	2024-08-30 05:53:06 -05:00
Jonathan Bennett	5bc17a9911	Key regen and MQTT fix (#4585) ... * Add public key regen * Properly label and handle PKI MQTT packets * Extra debug message to indicate PKI_UNKNOWN_PUBKEY * Ternary! * Don't call non-existant function on stm32 * Actually fix STM32 compilation	2024-08-29 16:28:03 -05:00
Ben Meadors	171512d2f6	Fixed buzzer	2024-08-29 11:42:27 -05:00
Ben Meadors	a34170654c	Fix T1000-E default to turn on buzzer for Ext. Notification (#4575)	2024-08-28 07:24:41 -05:00
Jonathan Bennett	ada61ae178	Don't compare nodeDB macaddr to owner.macaddr, because in rare cases that may be unset. (#4562) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-08-27 14:49:58 -05:00
Jonathan Bennett	b9a8683a4b	Mask out random bits when doing queue ordering (#4561) ... * Mask out random bits when doing queue ordering * Parenthesis	2024-08-26 15:48:47 -05:00
Jonathan Bennett	5824a8f4c1	Deal with admin_key being repeated (#4558)	2024-08-26 12:29:44 -05:00
Ben Meadors	d0fd17134e	Protos	2024-08-26 07:48:07 -05:00
Ben Meadors	d6dac1737a	Userlite mem comparison (#4552)	2024-08-24 12:19:31 -05:00
github-actions[bot]	23844389ac	[create-pull-request] automated change (#4544) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-08-23 20:44:14 -05:00
geeksville	aa54335e21	remove deprecated serial/bt logging options and unify in the new (#4516) ... security option. Per discussion in https://github.com/meshtastic/firmware/issues/4375 no need to preserve the old options when changing to this new simpler single boolean because they were newish, rarely used and only for 'advanced' developers.	2024-08-23 20:18:36 -05:00
Ben Meadors	2a279c7f3d	Dum dum zero comparision	2024-08-23 07:07:28 -05:00
Ben Meadors	7abc194ef5	Found more places to set explicit has_optional on position (#4542)	2024-08-23 07:04:34 -05:00
Michael Gjelsø	0850ad6c8d	Initial support for RadioMaster Bandit. (#4523) ... * Initial support for RadioMaster Bandit. * Different lighting can be made for Button 1 & 2 on the Bandit. Changes to AmbientLighting will turn off af shutdown(). * Trunk * Trunk again.	2024-08-23 06:28:23 -05:00
Jonathan Bennett	00ea9182a4	Fix copyPasta in NodeDB (#4538)	2024-08-23 06:26:19 -05:00
Jonathan Bennett	ab7de7f6a0	Add handling for sessionkey config (#4513) ... * Add handling for sessionkey config * Protos --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-08-20 13:36:24 -05:00
Nestpebble	ee9e46ec92	Make it possible to define TCXO and XTAL radio modules within one variant (#4492) ... * Update main.cpp Add in TCXO_OPTIONAL variable for tcxoVoltage and a double-check for working in both modes. * Update SX126xInterface.cpp Make a change to the tcxoVoltage setting so that TCXO_OPTIONAL works if defined. * Update variant.h Added define for TCXO_OPTIONAL and the tcxoVoltage variable. Added detail on the compatible boards. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-08-20 06:54:18 -05:00
Tom Fifield	2472c7cdc7	JP frequency - 20mW limit, change freqs to avoid duty cycle (#4446) ... Thanks to user Goyath on Discord, we discovered that in Japan the 250mW radio level requires licensing, and 20mW is the practical limit. We also discovered that a duty cycle of 10% is needed on most frequencies. CH 24-38 920.5-923.5 20mW no airtime restrictions CH 39-61 923.5-928.1 20mW 10% airtime	2024-08-20 06:20:01 -05:00
Jonathan Bennett	273beef148	Re-set the extra-nonce value	2024-08-18 22:25:08 -05:00
Jonathan Bennett	7b64c4a5bf	Merge branch 'master' into 2.5-changes	2024-08-18 19:14:21 -05:00
Jonathan Bennett	f439081674	Don't segfault on PKI from unknown nodes	2024-08-18 14:11:39 -05:00
GUVWAF	7a65c8838d	Fall back to default modem preset if requested bandwidth is too large (#4497)	2024-08-18 09:14:23 -05:00
Rafael Cortês	7129cee944	feature: default to fuzzy GPS location on the Default Channel (#4467) ... * feature: default to fuzzy GPS location on the Default Channel * Default to 13 * 13 default --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-08-18 07:38:54 -05:00
Jonathan Bennett	23e3e6db92	Add 4 bytes of random nonce to PKI (#4493)	2024-08-18 07:23:56 -05:00
GUVWAF	33ced7e87a	Add two-way traceroute result with SNR per hop (#4485) ... * Add two-way traceroute result with SNR per hop * Update protos	2024-08-17 17:34:32 -05:00
Jonathan Bennett	daddaf7146	Merge branch 'master' into 2.5-changes	2024-08-17 12:24:19 -05:00
Ben Meadors	5ff1078c8c	Move NeighborInfo interval default to 6 hours (double NodeInfo) (#4483) ... * Move NeighborInfo in line with NodeInfo * Set default to 6 hours and cap minimum at 2 hours	2024-08-17 11:51:53 -05:00
Ben Meadors	9dad62e3c4	Set time-only admin command (#4479)	2024-08-17 05:52:36 -05:00
Jonathan Bennett	cec8233cd1	Don't attempt PKI decryption on broadcast packets	2024-08-16 19:33:06 -05:00
Ben Meadors	e61bd84116	Send local stats telemetry to phone every 15 minutes (#4475) ... * Send local stats telemetry to phone every 10 minutes * Add debug log and bump to 15 minutes * Tronk * Explicit has_ optional	2024-08-16 17:15:51 -05:00
Ben Meadors	390de724ba	Update 2.5 protos	2024-08-16 06:09:02 -05:00
Ben Meadors	6f1dae1b1b	Re-compute correct timeslot on applyModemConfig (#4469) ... * Re-compute correct timeslot on applyModemConfig * Cap contention window max at 7	2024-08-15 15:05:38 -05:00
Ben Meadors	96cf78aadd	Short turbo preset (#4465)	2024-08-14 21:16:21 -05:00
Jonathan Bennett	1be635a797	Merge remote-tracking branch 'origin/master' into 2.5-changes	2024-08-14 19:01:06 -05:00
Jonathan Bennett	8ef72a5c08	Shorter nodeinfo timeout redux (#4458) ... * Add shorterTimeout bool to sendOurNodeInfo * Respond to likely PKI decode errors with a quick nodeinfo * Protbufs * Move to PKI_UNKNOWN_PUBKEY for PKI decode error	2024-08-14 17:17:53 -05:00
Christopher Hoover	181325103a	Improves ignore messages in Router.cpp (#4442) ... Signed-off-by: Christopher Hoover <ch@murgatroid.com> .	2024-08-14 07:51:32 -05:00
Jonathan Bennett	8ce1c07c4e	Check for blank key coming from client	2024-08-13 22:34:21 -05:00
Jonathan Bennett	b528290fde	Failure returns PKI_FAILED message if client requested PKI	2024-08-13 18:45:40 -05:00
Jonathan Bennett	ff89dca5b3	Add PKI indicator to printPacket	2024-08-13 18:45:40 -05:00
Jonathan Bennett	80fd121d87	Add meshtastic_Routing_Error_NO_CHANNEL	2024-08-13 18:45:40 -05:00