mirror of
https://github.com/meshtastic/firmware.git
synced 2025-08-02 11:55:56 +00:00
316928deb0
* Cleanup GPS, add UC6580 autodetect Our GPS code autodetects devices by default. Previously UC6580 was statically assigned, and had its own baudrate configuration inside the GPS code. This change adds autodetect functionality for the UC6580 and moves any 'special' GPS baud rate requirements for a variant out into the variant configuration. Thereby cleaning up core GPS code a little, saving the whales, and curing global warming. New Functionality: * If GPS_BAUDRATE is defined in variant.h, GPS autodetection will try that baudrate first. * UC6580 GPS chips are now automatically detected * Only run speedSelect skip the first time * Cleanup GPS, add UC6580 autodetect Our GPS code autodetects devices by default. Previously UC6580 was statically assigned, and had its own baudrate configuration inside the GPS code. This change adds autodetect functionality for the UC6580 and moves any 'special' GPS baud rate requirements for a variant out into the variant configuration. Thereby cleaning up core GPS code a little, saving the whales, and curing global warming. New Functionality: * If GPS_BAUDRATE is defined in variant.h, GPS autodetection will try that baudrate first. * UC6580 GPS chips are now automatically detected * Cleanup GPS, add UC6580 autodetect Our GPS code autodetects devices by default. Previously UC6580 was statically assigned, and had its own baudrate configuration inside the GPS code. This change adds autodetect functionality for the UC6580 and moves any 'special' GPS baud rate requirements for a variant out into the variant configuration. Thereby cleaning up core GPS code a little, saving the whales, and curing global warming. New Functionality: * If GPS_BAUDRATE is defined in variant.h, GPS autodetection will try that baudrate first. * UC6580 GPS chips are now automatically detected * Remove Airoha baud rate code It's no longer needed. |
||
|---|---|---|
| .. | ||
| ai-c3 | ||
| betafpv_900_tx_nano | ||
| betafpv_2400_tx_micro | ||
| bpi_picow_esp32_s3 | ||
| canaryone | ||
| CDEBYTE_EoRa-S3 | ||
| chatter2 | ||
| diy | ||
| Dongle_nRF52840-pca10059-v1 | ||
| EBYTE_ESP32-S3 | ||
| esp32-s3-pico | ||
| feather_diy | ||
| heltec_capsule_sensor_v3 | ||
| heltec_esp32c3 | ||
| heltec_hru_3601 | ||
| heltec_mesh_node_t114 | ||
| heltec_v1 | ||
| heltec_v2 | ||
| heltec_v2.1 | ||
| heltec_v3 | ||
| heltec_vision_master_e213 | ||
| heltec_vision_master_e290 | ||
| heltec_vision_master_t190 | ||
| heltec_wireless_paper | ||
| heltec_wireless_paper_v1 | ||
| heltec_wireless_tracker | ||
| heltec_wireless_tracker_V1_0 | ||
| heltec_wsl_v3 | ||
| lora_isp4520 | ||
| lora_relay_v1 | ||
| lora_relay_v2 | ||
| m5stack_core | ||
| m5stack_coreink | ||
| m5stack-stamp-c3 | ||
| MakePython_nRF52840_eink | ||
| MakePython_nRF52840_oled | ||
| monteops_hw1 | ||
| my_esp32s3_diy_eink | ||
| my_esp32s3_diy_oled | ||
| nano-g1 | ||
| nano-g1-explorer | ||
| nano-g2-ultra | ||
| pca10056-rc-clock | ||
| picomputer-s3 | ||
| portduino | ||
| ppr | ||
| ppr1 | ||
| radiomaster_900_bandit_micro | ||
| radiomaster_900_bandit_nano | ||
| rak2560 | ||
| rak4631 | ||
| rak4631_epaper | ||
| rak4631_epaper_onrxtx | ||
| rak10701 | ||
| rak11200 | ||
| rak11310 | ||
| rp2040-lora | ||
| rpipico | ||
| rpipico-slowclock | ||
| rpipicow | ||
| senselora_rp2040 | ||
| station-g1 | ||
| station-g2 | ||
| t-deck | ||
| t-echo | ||
| t-watch-s3 | ||
| tbeam | ||
| tbeam_v07 | ||
| tbeam-s3-core | ||
| tlora_t3s3_v1 | ||
| tlora_v1 | ||
| tlora_v1_3 | ||
| tlora_v2 | ||
| tlora_v2_1_16 | ||
| tlora_v2_1_16_tcxo | ||
| tlora_v2_1_18 | ||
| trackerd | ||
| tracksenger | ||
| TWC_mesh_v4 | ||
| unphone | ||
| wio-e5 | ||
| wio-sdk-wm1110 | ||
| wio-t1000-s | ||
| wio-tracker-wm1110 | ||
| wiphone | ||
| xiao_ble | ||