mirror of
https://github.com/meshtastic/firmware.git
synced 2025-02-01 10:19:59 +00:00
66 lines
3.1 KiB
INI
66 lines
3.1 KiB
INI
; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
|
|
[env:rak4631_eth_gw]
|
|
extends = nrf52840_base
|
|
board = wiscore_rak4631
|
|
board_check = true
|
|
build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_eth_gw -D RAK_4631
|
|
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
|
|
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
|
|
-DEINK_DISPLAY_MODEL=GxEPD2_213_BN
|
|
-DEINK_WIDTH=250
|
|
-DEINK_HEIGHT=122
|
|
-DNRF52_USE_JSON=1
|
|
-DMESHTASTIC_EXCLUDE_GPS=1
|
|
-DMESHTASTIC_EXCLUDE_WIFI=1
|
|
-DMESHTASTIC_EXCLUDE_SCREEN=1
|
|
; -DMESHTASTIC_EXCLUDE_PKI=1
|
|
-DMESHTASTIC_EXCLUDE_POWER_FSM=1
|
|
-DMESHTASTIC_EXCLUDE_POWERMON=1
|
|
; -DMESHTASTIC_EXCLUDE_TZ=1
|
|
-DMESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION=1
|
|
-DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
|
|
-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
|
|
-DMESHTASTIC_EXCLUDE_STOREFORWARD=1
|
|
-DMESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
|
|
-DMESHTASTIC_EXCLUDE_WAYPOINT=1
|
|
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_eth_gw> +<mesh/eth/> +<mesh/api/> +<mqtt/>
|
|
lib_deps =
|
|
${nrf52840_base.lib_deps}
|
|
${networking_base.lib_deps}
|
|
melopero/Melopero RV3028@^1.1.0
|
|
https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
|
|
rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
|
|
https://github.com/meshtastic/RAK12034-BMX160.git#4821355fb10390ba8557dc43ca29a023bcfbb9d9
|
|
bblanchon/ArduinoJson @ 6.21.4
|
|
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
|
|
; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
|
|
;upload_protocol = jlink
|
|
|
|
; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
|
|
; programming time is about the same as the bootloader version.
|
|
; For information on this see the meshtastic developers documentation for "Development on the NRF52"
|
|
[env:rak4631_eth_gw_dbg]
|
|
extends = env:rak4631
|
|
board_level = extra
|
|
|
|
; if the builtin version of openocd has a buggy version of semihosting, so use the external version
|
|
; platform_packages = platformio/tool-openocd@^3.1200.0
|
|
|
|
build_flags =
|
|
${env:rak4631_eth_gw.build_flags}
|
|
-D USE_SEMIHOSTING
|
|
|
|
lib_deps =
|
|
${env:rak4631_eth_gw.lib_deps}
|
|
https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
|
|
|
|
; NOTE: the pyocd support for semihosting is buggy. So I switched to using the builtin platformio support for the stlink adapter which worked much better.
|
|
; However the built in openocd version in platformio has buggy support for TCP to semihosting.
|
|
;
|
|
; So I'm now trying the external openocd - but the openocd scripts for nrf52.cfg assume you are using a DAP adapter not an STLINK adapter.
|
|
; In theory I could change those scripts. But for now I'm trying going back to a DAP adapter but with the external openocd.
|
|
|
|
upload_protocol = stlink
|
|
; eventually use platformio/tool-pyocd@^2.3600.0 instad
|
|
;upload_protocol = custom
|
|
;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE |