9796 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
mverch67	03582dbbea	trunk fmt	2025-02-07 18:31:26 +01:00
mverch67	580b70c052	update lib	2025-02-07 18:25:28 +01:00
Ben Meadors	6b94dcaadc	Merge branch '2.6' into tft-gui-work	2025-02-07 08:54:12 -06:00
Ben Meadors	252a93f652	Merge branch 'master' into tft-gui-work	2025-02-07 08:16:52 -06:00
Ben Meadors	66a98fb062	2.6 <- Next hop router (#6005) ... * Initial version of NextHopRouter * Set original hop limit in header flags * Short-circuit to FloodingRouter for broadcasts * If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter * Set last byte to 0xFF if it ended at 0x00 As per an idea of @S5NC * Also update next-hop based on received DM for us * temp * Add 1 retransmission for intermediate hops when using NextHopRouter * Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback * Update protos, store multiple relayers * Remove next-hop update logic from NeighborInfoModule * Fix retransmissions * Improve ACKs for repeated packets and responses * Stop retransmission even if there's not relay node * Revert perhapsRebroadcast() * Remove relayer if we cancel a transmission * Better checking for fallback to flooding * Fix newlines in traceroute print logs * Stop retransmission for original packet * Use relayID * Also when want_ack is set, we should try to retransmit * Fix cppcheck error * Fix 'router' not in scope error * Fix another cppcheck error * Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK Also check for broadcast in `getNextHop()` * Formatting and correct NUM_RETRANSMISSIONS * Update protos * Start retransmissions in NextHopRouter if ReliableRouter didn't do it * Handle repeated/fallback to flooding packets properly First check if it's not still in the TxQueue * Guard against clients setting `next_hop`/`relay_node` * Don't cancel relay if we were the assigned next-hop * Replies (e.g. tapback emoji) are also a valid confirmation of receipt --------- Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>	2025-02-07 06:29:36 -06:00
Ben Meadors	d65d9305d3	Merge branch 'master' into 2.6	2025-02-07 06:03:13 -06:00
dylanli	4e8c4f0d55	T1000-E hardware updates and GPS positioning accuracy optimisation (#6003) ... * T1000-E button setting update * T1000-E GNSS lock error fix * T1000-E GNSS improve detection success --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-02-07 10:02:56 +02:00
github-actions[bot]	34e5cf0d96	[create-pull-request] automated change (#6002) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-02-06 20:26:27 -06:00
Ben Meadors	b28db07409	Back to 80	2025-02-06 20:01:18 -06:00
Ben Meadors	f753caf15d	Update ref	2025-02-06 20:00:56 -06:00
Tom Fifield	2f1f323746	Merge branch 'master' into tft-gui-work	2025-02-07 09:30:30 +08:00
lizthedeveloper	4a6a0efcfd	log the nonce value at DEBUG instead of INFO (#6001) ... you're leaking the nonce to stdout, if your logs are routed to a folder, this logs the nonce every time, leading to replay attack surface area being higher. Changed to debug.	2025-02-07 08:29:48 +08:00
github-actions[bot]	0c1838dde7	[create-pull-request] automated change (#6000) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-02-06 14:55:39 -06:00
Ben Meadors	b183febd3c	Merge remote-tracking branch 'origin/master' into 2.6	2025-02-06 14:20:46 -06:00
github-actions[bot]	cb0519dd9c	[create-pull-request] automated change (#5989) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-02-06 14:11:32 -06:00
Manuel	9db51a72a4	Fix T-Deck/T-Watch no BT (#5998) ... fixes #5997	2025-02-06 14:11:17 -06:00
Tom	64def246ee	Corrected some misinformation (#5995) ... Change the module text too soon , before it had chance to reach a final conclusion. Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>	2025-02-06 11:36:04 +08:00
Austin	1c8eb7ece3	meshtasticd: Fix web download location (#5993)	2025-02-05 15:19:22 -06:00
Austin	447533aae5	meshtasticd-debian: Remove existing deb builds (#5792) ... Replaced with OpenSUSE Build Service https://build.opensuse.org/project/show/network:Meshtastic	2025-02-04 07:38:54 -05:00
github-actions[bot]	1b457bcfbb	[create-pull-request] automated change (#5985) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-02-03 20:47:51 -06:00
Thomas Göttgens	ed07cc067a	Merge branch 'master' of https://github.com/meshtastic/firmware	2025-02-03 16:48:23 +01:00
Thomas Göttgens	a3a295488c	add firmware build script for use with docker	2025-02-03 16:48:10 +01:00
Thomas Göttgens	5c17afb2ac	Clean up some legacy macro definitions (#5983)	2025-02-03 09:36:05 -06:00
Tom Fifield	8cacdb65d6	Fix INA226 Sensor Voltage Readings (#5972) ... They were off by a factor of 1000 due to the difference between Volts and MilliVolts, as reported by @morcant . Fixes https://github.com/meshtastic/firmware/issues/5969	2025-02-03 08:39:42 -06:00
Tom	3a34f8beaf	E80 promicro update (#5967) ... * add readme and update rfswitch * Updated readme to include all data from Ebyte * Added results from switch testing & notes thereon * fixed picture * Whoops! Forgot to uncomment some settings from test. * Update readme.md * Delete variants/diy/nrf52_promicro_diy_tcxo/E80_RSSI_per_case.png * Add webp image to appease trunk * Update readme.md * Trunky trunk trunk * Clang and the trunk is done	2025-02-03 20:16:35 +08:00
GUVWAF	d740934278	Don't rate-limit position requests for Lost and Found role (#5981)	2025-02-03 19:24:47 +08:00
Woutvstk	b370717dcd	Add bearing to other node on device screen in text (#5968) ... * Merge branch 'store-and-forward' of https://github.com/Woutvstk/meshtastic_firmware into store-and-forward * also show bearing to a waypoint in text on screen	2025-02-03 13:43:32 +08:00
Chloe Bethel	d9534cfc9d	Remove unused usages of #include <iostream> to save Flash (#5978) ... Saves ~100KB on wio-e5, which was previously at 99% Flash usage	2025-02-03 11:31:54 +08:00
Tom Fifield	18e1ce8f4c	Merge branch 'master' into tft-gui-work	2025-02-01 17:02:53 +08:00
Austin	4c0e0b8471	Portduino: Set Web SSL Cert / Key paths from yaml (#5961)	2025-02-01 16:58:58 +08:00
Ben Meadors	b5cad2b65e	Fix negative decimal value detection in userPrefs (#5963)	2025-01-29 20:52:24 -06:00
Jason P	cd8592ef4a	Fixes #5766 Updated MQTT privateCidrRanges to add Tailscale (#5957)	2025-01-29 06:14:43 -06:00
Austin	78da8f6fc4	Portduino: Allow limiting TX Power from yaml (#5954)	2025-01-29 12:51:26 +01:00
Tom Fifield	6a12760c3d	Fix off-by-one error with log writes (#5959) ... As reported by @jstockdale, when writing coloured logs we were writing the full string, including a null terminator. This caused issues for programs consuming our logs. The fix as identified is not to write the null. Fixes https://github.com/meshtastic/firmware/issues/5945	2025-01-28 19:57:52 -06:00
Thomas Göttgens	30a31a3a13	Oem logo (#5939) ... * reinstate oemlogo, add to userPrefs.jsonc * disable from default build	2025-01-28 08:38:22 -06:00
mverch67	3d066cd71b	T-Deck: increase LVGL memory size	2025-01-27 22:12:49 +01:00
Manuel	3872c4ecfc	Merge branch 'master' into tft-gui-work	2025-01-27 22:09:13 +01:00
Manuel	2d42e1b2bc	fix: TCXO_OPTIONAL featuring SenseCAP Indicator (V1/V2) (#5948) ... * fix TCXO_OPTIONAL * fix LOG_WARN * fix lora.begin() returns -707 * trunk fmt	2025-01-27 14:00:12 -06:00
GUVWAF	4747e73f37	Space out periodic broadcasts of modules automatically (#5931) ... * Space out periodic broadcasts of modules automatically * Add warning for function usage --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-01-26 13:59:59 -06:00
Aleksey Vasilenko	10d553087c	Add missing build_unflags (#5941) ... Fixes 'undefined reference to app_main' build error for my_esp32s3_diy_eink and my_esp32s3_diy_oled variants.	2025-01-26 16:54:26 +08:00
Ben Meadors	7649e70585	Revert "No focus on new messages if auto-carousel is off (#5881)" (#5936) ... This reverts commit 0f981153eb.	2025-01-25 12:01:25 -06:00
GUVWAF	a14346bc4f	Rate limit position replies to three minutes (#5932)	2025-01-25 09:24:24 -06:00
github-actions[bot]	fd56995764	[create-pull-request] automated change (#5928) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-01-25 07:53:24 -06:00
mverch67	e742a9dfd3	preparations for generic DisplayDriverFactory	2025-01-25 12:50:47 +01:00
github-actions[bot]	4c97351187	[create-pull-request] automated change (#5926) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-01-24 18:52:17 -06:00
Tom Fifield	92001503cb	Merge branch 'master' into tft-gui-work	2025-01-25 10:49:33 +11:00
Tom Fifield	3298df953a	Fixed the issue that the wifi configuration saved to RAM did not take effect. (#5925) ... Co-authored-by: virgil <virgil.wang.cj@gmail.com>	2025-01-24 07:30:18 -06:00
Tom Fifield	967d247298	Merge branch 'master' into tft-gui-work	2025-01-24 20:20:19 +11:00
Ben Meadors	d1f7739bbe	Peg NRF52 arduino to meshtastic fork with LFE bluetooth fix (#5924)	2025-01-23 19:56:59 -06:00
Ben Meadors	0d860882a8	NRF52 - Remove file totally before opening write (#5916) ... * Remove prefs first * Remove file first * Remove truncate * No longer needed * Missed a param * That wasn't supposed to be there * Remove vestigal lfs assert * Durr	2025-01-23 19:12:20 -06:00