andrekir
c9686d2f62
remove PIN_EINK_EN from RAK4631 variants
2023-03-12 19:29:12 +01:00
Andre K
634251834f
fix rak4631_epaper PIN_EINK_EN
...
revert 088ab106dd
2023-03-12 19:29:12 +01:00
Ben Meadors
e737a22120
Platform updates ( #2340 )
...
* 6.1.0
* Update libs
* Update nrf52 while we're at it
* Remove temporary heltec platform packages
* Update install scripts to flash s3 ota partition bin
2023-03-09 12:45:38 -06:00
A. Rager
e6d69e2b67
Refactor i2cScan.h To Handle 2 Bus ( #2337 )
...
* Break i2cScan out into a set of classes for scanning i2c
* refactor i2cscan addresses to be structs that allow addressing by port + address
* build whoopsies
* trunk fmt
* trunk fmt
* lost some build fixes from the merge
* more cleaning for build safety, RTC behavior
2023-03-08 21:13:46 -06:00
Thomas Göttgens
267db05d69
- G1 Explorer use correct display controller
...
- adhere UA font in modules
2023-03-08 17:12:25 +01:00
Thomas Göttgens
4a0dfb5401
T3S3-1.1 SX1276 config (and cosmetic change for SX1280 in PA mode)
2023-03-04 18:39:19 +01:00
A. Rager
214feb1f21
Add Hardware: BetaFPV 900 Nano TX ( #2249 )
...
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2023-03-01 08:36:25 -06:00
Manuel
9008c75517
Fixed: Tlora-t3s3-v1 SX1262 firmware reboots continuously ( #2308 ) ( #2315 )
2023-02-28 07:45:10 -06:00
GUVWAF
95bbcd2cb7
Use LORA_DIO1 as RadioLib GPIO for SX127x chips ( #2290 )
...
* When channel is active, first try receiving that packet
Afterwards we'll try transmitting again
* Remove setStandby in startSend
Already done in isChannelActive()
* Set LORA_DIO1 as RadioLib GPIO for SX127x
* LORA_DIO1 for Heltec v1, overlaps with GPS_TX
Set to RADIOLIB_NC for now
* If receive was not successful, startReceive doesn't trigger the interrupt
So we have to go back to transmitting anyway
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2023-02-20 07:40:44 -06:00
neil
b33632f21a
'nano-g1-explorer'
2023-02-18 04:49:37 +08:00
Ben Meadors
09f2ea8938
Portduino isn't extra. It's extra special
2023-02-10 07:47:43 -06:00
Thomas Göttgens
83e309f3bf
label boards as secondary to split the core firmware archive by support level.
...
Ref: https://docs.platformio.org/en/latest/scripting/examples/platformio_ini_custom_options.html
2023-02-10 01:35:25 +01:00
GUVWAF
a5b99ee5d5
Try other location
2023-02-07 20:05:40 +01:00
GUVWAF
4a0c341438
Make Portduino build again
2023-02-07 19:40:15 +01:00
Ben Meadors
9522d4d2f5
Make a pie?
2023-02-07 07:17:32 -06:00
Ben Meadors
cb3d5a5748
Comment about external PA module boards
2023-01-25 15:48:42 -06:00
Ben Meadors
f1fd41a378
Add to Eink target as well
2023-01-25 11:48:11 -06:00
Ben Meadors
ca91447c0e
For science!
2023-01-25 10:10:09 -06:00
Ben Meadors
2c1b7840c5
Make this pr great again
2023-01-23 09:22:40 +01:00
Thomas Göttgens
e9acf413fb
After thoroughly reading schematics and documentation, i conclude that this is theoretically the right definition for this hookup.
2023-01-23 09:22:40 +01:00
Ben Meadors
266c61065d
I swear I did this before you butthole
2023-01-21 19:51:24 -06:00
Ben Meadors
e2e7658789
w/e
2023-01-21 19:24:33 -06:00
Thomas Göttgens
51b2c431d9
trunk roundhouse kick
2023-01-21 21:23:24 +01:00
Ben Meadors
7e27729dae
Remove HAS_GPS for WSLv3
2023-01-15 08:24:20 -06:00
Thomas Göttgens
5fd00b2538
- make a template class for API Server
...
- Skip a lot of duplicate code
- add a hexDump output - might come in handy
- refactor directory names
- remove unused debugOut that was generating template errors
2023-01-09 17:03:52 +01:00
Thomas Göttgens
49172e416e
Merge pull request #2108 from markbirss/develop
...
Add initial support for BETAFPV ELRS Micro TX Module 2.4G with ESP32 CPU
2023-01-07 22:50:04 +01:00
Mark Trevor Birss
4d7402839e
Update platformio.ini
2023-01-07 16:00:27 +02:00
Mark Trevor Birss
c98dc4cae0
Update variant.h
2023-01-07 13:48:35 +02:00
Mark Trevor Birss
f21212dd3e
Update platformio.ini
2023-01-07 13:23:33 +02:00
Mark Trevor Birss
0e0ccad489
Update variant.h
2023-01-07 13:22:32 +02:00
Mark Trevor Birss
9f1c77da76
Create variant.h
2023-01-07 13:01:14 +02:00
Mark Trevor Birss
7c1c49b8ab
Create platformio.ini
2023-01-07 13:00:50 +02:00
Ben Meadors
f4099261df
Hydra gps troubleshooting
2023-01-06 15:04:11 -06:00
Thomas Göttgens
94cb100e3f
Master to Develop
2022-12-28 15:30:23 +01:00
Thomas Göttgens
e25d05689b
Updates to external notification and radiolib for SX128x. Rip out Godmode again for these
2022-12-28 14:57:40 +01:00
Thomas Göttgens
430908f5d6
TLORA_T3_S3
2022-12-28 13:56:56 +01:00
Ben Meadors
28b954017f
Copy pasta
2022-12-22 14:55:32 +01:00
Ben Meadors
16d826d6c7
Move to upstream espressif arduino
2022-12-22 14:55:32 +01:00
Thomas Göttgens
d566457f0c
Merge remote-tracking branch 'remotes/origin/master' into develop
2022-12-18 14:07:20 +01:00
Thomas Göttgens
c577e09183
Merge branch 'develop' into gps-toggle-final
2022-12-16 20:58:53 +01:00
Thomas Göttgens
72f1416b30
add variant comment about radiolib
2022-12-16 20:21:56 +01:00
code8buster
f2229e6977
Decrease click time window to avoid spurious double press detections while cycling windows quickly, build power toggle by default
2022-12-15 11:08:37 -05:00
Mark Trevor Birss
088ab106dd
Update variant.h
2022-12-14 17:57:02 +02:00
Mark Trevor Birss
110c3f619a
Update variant.h
2022-12-14 17:56:44 +02:00
ghostop14
59ec7f31ab
Enable GPS capabilities on heltec V3
2022-12-13 12:31:39 -05:00
Thomas Göttgens
5fbc630061
add IO7 to RAK pinouts - only comments changed
2022-12-11 21:17:46 +01:00
code8buster
911083c49d
Adds a flag to turn the GPS power rail off entirely on tbeam
2022-12-04 01:57:00 -05:00
Thomas Göttgens
bba6bf387e
hopefully fix compilation errors
2022-11-29 14:35:46 +01:00
Thomas Göttgens
4d32f7c5ad
WIP: audio module still does not work, but enabled for all regions where audio is permitted.
2022-11-29 11:22:18 +01:00
Thomas Göttgens
c7681cb24d
update board definition, update copy/paste errors, fix SX1280.
2022-11-27 14:03:50 +01:00
Ben Meadors
47a47f1e69
Merge branch 'master' into develop
2022-11-26 08:18:35 -06:00
Ben Meadors
84a9d95b1f
Merge branch 'master' into MESSAGES
2022-11-26 06:43:52 -06:00
Ihor Nehrutsa
6507683909
Squashed commit of the following:
...
commit c8d1bcf04fae5f7ac5b639ddd15a738045014c95
Author: Ihor Nehrutsa <Ihor.Nehrutsa@gmail.com>
Date: Fri Nov 25 15:11:18 2022 +0200
Revert "variants\tbeam\variant.h: Use LORA_CS instead of RF95_NSS"
This reverts commit 8d225ced9cf1b55e11af8d225ced9c
2022-11-25 15:17:24 +02:00
Thomas Göttgens
025d2264a2
m5stack runs with native tone support now.
2022-11-24 10:44:43 +01:00
Thomas Göttgens
5f8267c956
use the buzzer for external notification module
2022-11-24 10:11:42 +01:00
Mark Trevor Birss
b3c396683e
Update platformio.ini
2022-11-23 21:25:19 +02:00
Mark Trevor Birss
f08874dd37
Update platformio.ini
2022-11-23 21:24:34 +02:00
Mark Trevor Birss
648054da9b
Add files via upload
2022-11-23 21:19:20 +02:00
Ben Meadors
00bc762bf1
Merge branch 'master' into develop
2022-11-21 09:38:46 -06:00
Thomas Göttgens
3b2b0bdc97
fix TLora V1 Boards Display Init
2022-11-21 15:50:47 +01:00
Ben Meadors
53cd6bdf15
Merge branch 'master' into develop
2022-11-21 07:35:46 -06:00
Ben Meadors
b23c364fc0
Test it this way
2022-11-15 16:22:53 -06:00
Thomas Göttgens
5bfc58ed64
testing issues with RAK11200/13300
2022-11-15 21:55:27 +01:00
Thomas Göttgens
b5ebfa9cc3
Portduino WIP
2022-11-15 07:59:01 +01:00
Thomas Göttgens
79eff42c3c
Fix and Break radiolib
2022-11-14 10:53:16 +01:00
Thomas Göttgens
50a301899e
start to sort radiolib out. If we have macros, use them! :-)
...
Also we need Godmode for the SX1280 for now, hopefully can revert to more sane operation.
2022-11-14 09:49:50 +01:00
Ben Meadors
6e856efd0e
Merge branch 'master' into develop
2022-11-13 14:45:48 -06:00
Ben Meadors
8d4c526d16
Add Heltec Wireless Stick Lite V3 support
2022-11-13 13:28:02 -06:00
Ben Meadors
33cd5ce6c1
Cleanup
2022-11-13 09:48:38 -06:00
Ben Meadors
f22c2e768e
Reorder
2022-11-13 09:47:55 -06:00
Ben Meadors
3d7dea0606
Added support for Heltec V3
2022-11-13 09:45:16 -06:00
Thomas Göttgens
7a67388a97
Merge branch 'master' of github.com:meshtastic/firmware into develop
2022-11-12 14:34:51 +01:00
lewishe
dff6eeb90e
Merge branch 'master' of https://github.com/lewisxhe/Meshtastic-device
2022-11-12 15:16:54 +08:00
lewishe
b68a026627
Update tbeam-s3 variant mapping
2022-11-12 14:39:42 +08:00
Thomas Göttgens
a6ea5496b4
Fixed DIO Pin mapping. SX1280 is working
2022-11-10 23:26:31 +01:00
Thomas Göttgens
de0954f307
switch to upstream Ethernet lib
2022-11-10 09:35:56 +01:00
Ben Meadors
3562d34555
Remove flag
2022-11-06 18:22:52 +01:00
Ben Meadors
3ca6f645d4
Portduino build flags
2022-11-06 18:22:52 +01:00
Ben Meadors
950d5defda
Master to develop (resolves conflicts) ( #1903 )
...
* Rearranging deck chairs, 900M22S working, 30S not
* We do have wire, just not where it's expected
* Put more of the module specific pins in their blocks
* tryfix compile with NO_SCREEN
* Portduino only: don't continue to try rebooting (#1887 )
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Support for TLORA 2.1-1.8
* Don't allow arbitrary channel name for admin (#1886 )
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Experimental DIY nrf52840 feather support (#1884 )
* Experimental DIY nrf52840 feather support
* Fix target
* sx1262 wiring
* Remove lib
* Don't consider Response as ACK for FloodingRouter (#1885 )
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix feather diy (#1892 )
* Fix variant
* Fix feather diy target
* [modules][external notifications] allow select channel to listen to
* Fix feather diy pin mapping (#1894 )
Thanks to @markbirss
* [create-pull-request] automated change
* Override Screen Autodtect
* Maybe fix crash of this board.
* Fixes reset loop with new espressif32 platform on tlora-v2
Sending a pulse to the OLED_RESET Pin 16 results in a reset loop using recent version of the espressif32 platform.
* Experiment with self hosted action runner
* Fix MQTT on ETH
* revert the tryfix
* Cheating
* Cleanup artifacts older than 1 month
* Update cleanup_artifacts.yml
* Update cleanup_artifacts.yml
* Update cleanup_artifacts.yml
* Delete cleanup_artifacts.yml
* fix: use RF95_IRQ for wakeup source in doLightSleep (#1899 )
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update protos
* Update protos
Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Mykhailo Lesyk <m@lesyk.org>
Co-authored-by: Mykhailo Lesyk <lesykm@users.noreply.github.com>
Co-authored-by: caveman99 <caveman99@users.noreply.github.com>
Co-authored-by: he-leon <he-leon@users.noreply.github.com>
Co-authored-by: Lars Weber <weber@weber-software.com>
2022-11-05 09:28:41 -05:00
Thomas Göttgens
09cdc20440
manual merge of changes from Master
2022-11-04 19:56:44 +01:00
Thomas Göttgens
09ddde177c
codec2 Audio Support for SX1280 (untested)
2022-11-02 18:23:41 +01:00
Ben Meadors
ef18b173cd
Experimental DIY nrf52840 feather support ( #1884 )
...
* Experimental DIY nrf52840 feather support
* Fix target
* sx1262 wiring
* Remove lib
2022-11-02 18:19:09 +01:00
Thomas Göttgens
3e82cd7dd4
Support for TLORA 2.1-1.8
2022-11-02 18:19:09 +01:00
code8buster
0ce018cf97
Put more of the module specific pins in their blocks
2022-11-02 18:19:09 +01:00
code8buster
15a8710e69
We do have wire, just not where it's expected
2022-11-02 18:19:09 +01:00
code8buster
cae75dcb6d
Rearranging deck chairs, 900M22S working, 30S not
2022-11-02 18:19:09 +01:00
code8buster
1f9db0a8fe
Disaster.radio dev board support update ( #1873 )
...
* Bringing changes from 1.2-legacy over to the new structure in 1.3/2.0
* Add meshtastic-dr-dev to CI artifact workflow
2022-10-29 16:37:27 -05:00
Thomas Göttgens
a1256818d9
update library location
2022-10-26 18:25:31 +02:00
Thomas Göttgens
a66538fe55
MQTT is working over ethernet
2022-10-26 00:07:02 +02:00
Thomas Göttgens
aab52f1e8d
Merge branch 'master' of github.com:meshtastic/Meshtastic-device
2022-10-23 16:41:04 +02:00
Mykhailo Lesyk
41267a42f7
[rak4630] enable 3.3v periphery before scan for i2c devices ( #1847 )
...
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2022-10-22 19:55:34 -05:00
Thomas Göttgens
103c82bc2c
only build on vanilla RAK4631 for now.
2022-10-22 16:42:36 +02:00
Thomas Göttgens
f3fee5f4fb
first murmurs of ethernet support
2022-10-22 16:29:50 +02:00
Ben Meadors
1fc3c0af70
Update variant.h ( #1814 )
2022-10-17 08:07:18 -05:00
Thomas Göttgens
994e396c00
update Raspberry Pico Framework
2022-10-13 13:57:17 +02:00
Thomas Göttgens
d4e65d8607
1.0.1 RTC LIB is released on PIO Registry
2022-10-08 11:09:16 +02:00
Thomas Göttgens
2d4bfe183c
Merge branch 'master' of github.com:meshtastic/Meshtastic-device
2022-10-07 16:42:29 +02:00
lewis he
004f6fa4d6
Add t-beam-s3-core onboard device support. ( #1764 )
...
* Change t-beam-s3-core pins definitions
* Add t-beam-s3-core power initialization to properly initialize the I2C device
* Add 6-axis and 3-axis sensor detection
2022-10-07 06:57:55 -05:00
Thomas Göttgens
1d09beb8a7
word wrap long input and fix compiler warnings
2022-10-06 18:40:31 +02:00
Thomas Göttgens
7f935717db
Update platformio.ini
2022-10-06 08:56:02 +02:00
