Commit Graph

37 Commits

Author SHA1 Message Date
HarukiToreda
2a6944fe12 Merge remote-tracking branch 'upstream/master' into StandaloneAddons 2025-05-15 21:18:01 -04:00
todd-herbert
feafd2bc0c
Protect T-Echo's touch button against phantom presses in OLED UI (#6735)
* Guard T-Echo touch button during LoRa TX

* Guard for T-Echo only

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-05-14 06:33:51 -05:00
HarukiToreda
7293e542ec GPS toggle now tells if it's on or off 2025-05-11 23:24:05 -04:00
HarukiToreda
14752caee5 Notification banners implemented 2025-05-08 22:00:57 -04:00
Jonathan Bennett
3a6fc668d8
20948 compass support (#6707)
* Add __has_include blocks for sensors

* Put BMP and BME back in the right sensors

* Split environmental_base to environmental_extra, to compile the working sensor libs for Native

* Remove hard-coded checks for ARCH_PORTDUINO

* Un-clobber bmx160

* Move BusIO to environmental_extra due to Armv7 compile error

* Move to forked BusIO for the moment

* Switch to Meshtastic ICM-20948 lib for Portduino support

* Use 20948 for compass direction

* Compass is more than just RAK4631

* Cleanup for 20948 compass

* use Meshtastic branch of 20948 lib

* Check for HAS_SCREEN for showing calibration screen

* No accelerometerThread on STM32
2025-05-07 18:38:42 -05:00
HarukiToreda
4e8ae7b108 Removed Jitter 2025-05-07 02:49:11 -04:00
HarukiToreda
0a61ea4137 Ad-hoc Position banner added 2025-05-07 01:05:14 -04:00
Thomas Göttgens
c94dd1e331
Minor adjustment of blink codes and 'unstick' the M2 button. (#6521) 2025-04-08 10:46:39 -05:00
Thomas Göttgens
606abfc116
Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507)
* Fix several features of M1 and M2 (i know what the 7 is now ...)

* 'THe' should be 'The'.

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* remove floating definition

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-04-07 05:46:22 -05:00
Thomas Göttgens
6c7c0770f9
add ThinkNode M2 Support (#6354)
* [WIP] Base firmware pending support for 2nd button

* Update button behaviour. Still WIP

* [WIP] Base firmware pending support for 2nd button

* Update button behaviour. Still WIP

* change env to lowercase

Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>

* yea - well - what else is new?

* fix secondary button behavior and update trunk

---------

Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>
2025-03-28 19:55:00 -05:00
Thomas Göttgens
0951fdd49b
Add support for Heltec HRI-3621 industrial sensor hub (#6366)
Some checks failed
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / build-debian-src (push) Waiting to run
CI / package-pio-deps-native-tft (push) Waiting to run
CI / test-native (push) Waiting to run
CI / docker-debian-amd64 (push) Waiting to run
CI / docker-alpine-amd64 (push) Waiting to run
CI / docker-debian-arm64 (push) Waiting to run
CI / docker-debian-armv7 (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Semgrep Full Scan / semgrep-full (push) Has been cancelled
2025-03-21 16:12:49 +01:00
Ben Meadors
99d3e5eb70
2.6 changes (#5806)
* 2.6 protos

* [create-pull-request] automated change (#5789)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Hello world support for UDP broadcasts over the LAN on ESP32 (#5779)

* UDP local area network meshing on ESP32

* Logs

* Comment

* Update UdpMulticastThread.h

* Changes

* Only use router->send

* Make NodeDatabase (and file) independent of DeviceState (#5813)

* Make NodeDatabase (and file) independent of DeviceState

* 70

* Remove logging statement no longer needed

* Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772)

* File system persistence fixes

* [create-pull-request] automated change (#6000)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Update ref

* Back to 80

* [create-pull-request] automated change (#6002)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* 2.6 <- Next hop router (#6005)

* Initial version of NextHopRouter

* Set original hop limit in header flags

* Short-circuit to FloodingRouter for broadcasts

* If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter

* Set last byte to 0xFF if it ended at 0x00
As per an idea of @S5NC

* Also update next-hop based on received DM for us

* temp

* Add 1 retransmission for intermediate hops when using NextHopRouter

* Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback

* Update protos, store multiple relayers

* Remove next-hop update logic from NeighborInfoModule

* Fix retransmissions

* Improve ACKs for repeated packets and responses

* Stop retransmission even if there's not relay node

* Revert perhapsRebroadcast()

* Remove relayer if we cancel a transmission

* Better checking for fallback to flooding

* Fix newlines in traceroute print logs

* Stop retransmission for original packet

* Use relayID

* Also when want_ack is set, we should try to retransmit

* Fix cppcheck error

* Fix 'router' not in scope error

* Fix another cppcheck error

* Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK
Also check for broadcast in `getNextHop()`

* Formatting and correct NUM_RETRANSMISSIONS

* Update protos

* Start retransmissions in NextHopRouter if ReliableRouter didn't do it

* Handle repeated/fallback to flooding packets properly
First check if it's not still in the TxQueue

* Guard against clients setting `next_hop`/`relay_node`

* Don't cancel relay if we were the assigned next-hop

* Replies (e.g. tapback emoji) are also a valid confirmation of receipt

---------

Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>

* fix "native" compiler errors/warnings NodeDB.h

* fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259)

* lib update: light theme

* fix merge issue

* lib update: home buttons + button try-fix

* lib update: icon color fix

* lib update: fix instability/crash on notification

* update lib: timezone

* timezone label

* lib update: fix set owner

* fix spiLock in RadioLibInterface

* add picomputer tft build

* picomputer build

* fix compiler error std::find()

* fix merge

* lib update: theme runtime config

* lib update: packet logger + T-Deck Plus

* lib update: mesh detector

* lib update: fix brightness & trackball crash

* try-fix less paranoia

* sensecap indicator updates

* lib update: indicator fix

* lib update: statistic & some fixes

* lib-update: other T-Deck touch driver

* use custom touch driver for Indicator

* lower tft task prio

* prepare LVGL ST7789 driver

* lib update: try-fix audio

* Drop received packets from self

* Additional decoded packet ignores

* Honor flip & color for Heltec T114 and T190 (#4786)

* Honor TFT_MESH color if defined for Heltec T114 or T190

* Temporary: point lib_deps at fork of Heltec's ST7789 library
For demo only, until ST7789 is merged

* Update lib_deps; tidy preprocessor logic

* Download debian files after firmware zip

* set title for protobufs bump PR (#4792)

* set title for version bump PR (#4791)

* Enable Dependabot

* chore: trunk fmt

* fix dependabot syntax (#4795)

* fix dependabot syntax

* Update dependabot.yml

* Update dependabot.yml

* Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797)

* Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800)

* Actions: Semgrep Images have moved from returntocorp to semgrep (#4774)

https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved!
 Official Docker images for Semgrep now available at semgrep/semgrep."

Patch updates our CI workflow for these images.

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Bump meshtestic from `31ee3d9` to `37245b3` (#4799)

Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`.
- [Commits](31ee3d90c8...37245b3d61)

---
updated-dependencies:
- dependency-name: meshtestic
  dependency-type: direct:production
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

* [create-pull-request] automated change (#4789)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798)

Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4.
- [Release notes](https://github.com/pnpm/action-setup/releases)
- [Commits](https://github.com/pnpm/action-setup/compare/v2...v4)

---
updated-dependencies:
- dependency-name: pnpm/action-setup
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

* Raspberry Pico2 - needs protos

* Re-order doDeepSleep (#4802)

Make sure PMU sleep takes place before I2C ends

* [create-pull-request] automated change

* heltec-wireless-bridge
requires Proto PR first

* feat: trigger class update when protobufs are changed

* meshtastic/ is a test suite; protobufs/ contains protobufs;

* Update platform-native to pick up portduino crash fix (#4807)

* Hopefully extract and commit to meshtastic.github.io

* CI fixes

* [Board] DIY "t-energy-s3_e22" (#4782)

* New variant "t-energy-s3_e22"

- Lilygo T-Energy-S3
- NanoVHF "Mesh-v1.06-TTGO-T18" board
- Ebyte E22 Series

* add board_level = extra

* Update variant.h

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>

* Consolidate variant build steps (#4806)

* poc: consolidate variant build steps

* use build-variant action

* only checkout once and clean up after run

* Revert "Consolidate variant build steps (#4806)" (#4816)

This reverts commit 9f8d86cb25.

* Make Ublox code more readable (#4727)

* Simplify Ublox code

Ublox comes in a myriad of versions and settings. Presently our
configuration code does a lot of branching based on versions being
or not being present.

This patch adds version detection earlier in the piece and branches
on the set gnssModel instead to create separate setup methods for Ublox 6,
Ublox 7/8/9, and Ublox10.

Additionally, adds a macro to make the code much shorter and more
readable.

* Make trunk happy

* Make trunk happy

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Consider the LoRa header when checking packet length

* Minor fix (#4666)

* Minor fixes

It turns out setting a map value with the index notation causes
an lookup that can be avoided with emplace. Apply this to one line in
the StoreForward module.

Fix also Cppcheck-determined highly minor performance increase by
passing gpiochipname as a const reference :)

The amount of cycles used on this laptop while learning about these
callouts from cppcheck is unlikely to ever be more than the cycles
saved by the fixes ;)

* Update PortduinoGlue.cpp

* Revert "Update classes on protobufs update" (#4824)

* Revert "Update classes on protobufs update"

* remove quotes to fix trunk.

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>

* Implement optional second I2C bus for NRF52840
Enabled at compile-time if WIRE_INFERFACES_COUNT defined as 2

* Add I2C bus to Heltec T114 header pins
SDA: P0.13
SCL: P0.16

Uses bus 1, leaving bus 0 routed to the unpopulated footprint for the RTC (general future-proofing)

* Tidier macros

* Swap SDA and SCL
SDA=P0.16, SCL=P0.13

* Refactor and consolidate time window logic (#4826)

* Refactor and consolidate windowing logic

* Trunk

* Fixes

* More

* Fix braces and remove unused now variables.

There was a brace in src/mesh/RadioLibInterface.cpp that was breaking
compile on some architectures.

Additionally, there were some brace errors in
src/modules/Telemetry/AirQualityTelemetry.cpp
src/modules/Telemetry/EnvironmentTelemetry.cpp
src/mesh/wifi/WiFiAPClient.cpp

Move throttle include in WifiAPClient.cpp to top.

Add Default.h to sleep.cpp

rest of files just remove unused now variables.

* Remove a couple more meows

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>

* Rename message length headers and set payload max to 255 (#4827)

* Rename message length headers and set payload max to 255

* Add MESHTASTIC_PKC_OVERHEAD

* compare to MESHTASTIC_HEADER_LENGTH

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>

* Check for null before printing debug (#4835)

* fix merge

* try-fix crash

* lib update: fix neighbors

* fix GPIO0 mode after I2S audio

* lib update: audio fix

* lib update: fixes and improvements

* extra

* added ILI9342 (from master)

* device-ui persistency

* review update

* fix request, add handled

* fix merge issue

* fix merge issue

* remove newline

* remove newlines from debug log

* playing with locks; but needs more testing

* diy mesh-tab initial files

* board definition for mesh-tab (not yet used)

* use DISPLAY_SET_RESOLUTION to avoid hw dependency in code

* no telemetry for Indicator

* 16MB partition for Indicator

* 8MB partition for Indicator

* stability: add SPI lock before saving via littleFS

* dummy for config transfer (#5154)

* update indicator (due to compile and linker errors)

* remove faulty partition line

* fix missing include

* update indicator board

* update mesh-tab ILI9143 TFT

* fix naming

* mesh-tab targets

* try: disable duplicate locks

* fix nodeDB erase loop when free mem returns invalid value (0, -1).

* upgrade toolchain for nrf52 to gcc 9.3.1

* try-fix (workaround) T-Deck audio crash

* update mesh-tab tft configs

* set T-Deck audio to unused 48 (mem mclk)

* swap mclk to gpio 21

* update meshtab voltage divider

* update mesh-tab ini

* Fixed the issue that indicator device uploads via rp2040 serial port in some cases.

* Fixed the issue that the touch I2C address definition was not effective.

* Fixed the issue that the wifi configuration saved to RAM did not take effect.

* rotation fix; added ST7789 3.2" display

* dreamcatcher: assign GPIO44 to audio mclk

* mesh-tab touch updates

* add mesh-tab powersave as default

* fix DIO1 wakeup

* mesh-tab: enable alert message menu

* Streamline board definitions for first tech preview. (#5390)

* Streamline board definitions for first tech preview. TBD: Indicator Support

* add point-of-checkin

* use board/unphone.json

---------

Co-authored-by: mverch67 <manuel.verch@gmx.de>

* fix native targets

* add RadioLib debugging options for (T-Deck)

* fix T-Deck build

* fix native tft targets for rpi

* remove wrong debug defines

* t-deck-tft button is handled in device-ui

* disable default lightsleep for indicator

* Windows Support - Trunk and Platformio (#5397)

* Add support for GPG

* Add usb device support

* Add trunk.io to devcontainer

* Trunk things

* trunk fmt

* formatting

* fix trivy/DS002, checkov/CKV_DOCKER_3

* hide docker extension popup

* fix trivy/DS026, checkov/CKV_DOCKER_2

* fix radioLib warnings for T-Deck target

* wake screen with button only

* use custom touch driver

* define wake button for unphone

* use board definition for mesh-tab

* mesh-tab rotation upside-down

* update platform native

* use MESH_TAB hardware model definition

* radioLib update (fix crash/assert)

* reference seeed indicator fix commit arduino-esp32

* Remove unneeded file change :)

* disable serial module and tcp socket api for standalone devices (#5591)

* disable serial module and tcp socket api for standalone devices
* just disable webserver, leave wifi available
* disable socket api

* mesh-tab: lower I2C touch frequency

* log error when packet queue is full

* add more locking for shared SPI devices (#5595)

* add more locking for shared SPI devices
* call initSPI before the lock is used
* remove old one
* don't double lock
* Add missing unlock
* More missing unlocks
* Add locks to SafeFile, remove from `readcb`, introduce some LockGuards
* fix lock in setupSDCard()
* pull radiolib trunk with SPI-CS fixes
* change ContentHandler to Constructor type locks, where applicable

---------

Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>

* T-Deck: revert back to lovyanGFX touch driver

* T-Deck: increase allocated PSRAM by 50%

* mesh-tab: streamline target definitions

* update RadioLib 7.1.2

* mesh-tab: fix touch rotation 4.0 inch display

* Mesh-Tab platformio: 4.0inch: increase SPI frequency to max

* mesh-tab: fix rotation for 3.5 IPS capacitive display

* mesh-tab: fix rotation for 3.2 IPS capacitive display

* restructure device-ui library into sub-directories

* preparations for generic DisplayDriverFactory

* T-Deck: increase LVGL memory size

* update lib

* trunk fmt

---------

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com>
Co-authored-by: Jason Murray <jason@chaosaffe.io>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: virgil <virgil.wang.cj@gmail.com>
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>

* Version this

* Update platformio.ini (#6006)

* tested higher speed and it works

* Un-extra

* Add -tft environments to the ci matrix

* Exclude unphone tft for now. Something is wonky

* fixed Indicator touch issue (causing IO expander issues), added more RAM

* update lib

* fixed Indicator touch issue (causing IO expander issues), added more RAM (#6013)

* increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage

* update device-ui lib

* Fix T-Deck SD card detection (#6023)

* increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage

* fix SDCard for T-Deck; allow SPI frequency config

* meshtasticd: Add X11 480x480 preset (#6020)

* Littlefs per device

* 2.6 update

* [create-pull-request] automated change (#6037)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* InkHUD UI for E-Ink (#6034)

* Decouple ButtonThread from sleep.cpp
Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables.

* InkHUD: initial commit (WIP)
Publicly discloses the current work in progress. Not ready for use.

* feat: battery icon

* chore: implement meshtastic/firmware #5454
Clean up some inline functions

* feat: menu & settings for "jump to applet"

* Remove the beforeRender pattern
It hugely complicates things. If we can achieve acceptable performance without it, so much the better.

* Remove previous Map Applet
Needs re-implementation to work without the beforeRender pattern

* refactor: reimplement map applet
Doesn't require own position
Doesn't require the beforeRender pattern to precalculate; now all-at-once in render
Lays groundwork for fixed-size map with custom background image

* feat: autoshow
Allow user to select which applets (if any) should be automatically brought to foreground when they have new data to display

* refactor: tidy-up applet constructors
misc. jobs including:
- consistent naming
- move initializer-list-only constructors to header
- give derived applets unique identifiers for MeshModule and OSThread logging

* hotfix: autoshow always uses FAST update
In future, it *will* often use FAST, but this will be controlled by a WindowManager component which has not yet been written.
Hotfixed, in case anybody is attempting to use this development version on their deployed devices.

* refactor: bringToForeground no longer requests FAST update
In situations where an applet has moved to foreground because of user input, requestUpdate can be manually called, to upgrade to FAST refresh.
More permanent solution for #23e1dfc

* refactor: extract string storage from ThreadedMessageApplet
Separates the code responsible for storing the limited message history, which was previously part of the ThreadedMessageApplet.
We're now also using this code to store the "most recent message". Previously, this was stored in the `InkHUD::settings` struct, which was much less space-efficient.
We're also now storing the latest DM, laying the foundation for an applet to display only DMs, which will complement the threaded message applet.

* fix: text wrapping
Attempts to fix a disparity between `Applet::printWrapped` and `Applet::getWrappedTextHeight`, which would occasionally cause a ThreadedMessageApplet message to render "too short", overlapping other text.

* fix: purge old constructor
This one slipped through the last commit..

* feat: DM Applet
Useful in combination with the ThreadedMessageApplets, which don't show DMs

* fix: applets shouldn't handle events while deactivated
Only one or two applets were actually doing this, but I'm making a habit of having all applets return early from their event handling methods (as good practice), even if those methods are disabled elsewhere (e.g. not observing observable, return false from wantPacket)

* refactor: allow requesting update without requesting autoshow
Some applets may want to redraw, if they are displayed, but not feel the information is worth being brought to foreground for. Example: ActiveNodesApplet, when purging old nodes from list.

* feat: custom "Recently Active" duration
Allows users to tailor how long nodes will appear in the "Recents" applets, to suit the activity level of their mesh.

* refactor: rename some applets

* fix: autoshow

* fix: getWrappedTextHeight
Remove the "simulate" option from printWrapped; too hard to keep inline with genuine printing (because of AdafruitGFX Fonts' xAdvance, mabye?). Instead of simulating, we printWrapped as normal, and discard pixel output by setting crop. Both methods are similarly inefficient, apparently.

* fix: text wrapping in ThreadedMessageApplet
Wrong arguments were passed to Applet::printWrapped

* feat: notifications for text messages
Only shown if current applet does not already display the same info. Autoshow takes priority over notifications, if both would be used to display the same info.

* feat: optimize FAST vs FULL updates
New UpdateMediator class counts the number of each update type, and suggets which one to use, if the code doesn't already have an explicit prefence. Also performs "maintenance refreshes" unprovoked if display is not given an opportunity to before a FULL refresh through organic use.

* chore: update todo list

* fix: rare lock-up of buttons

* refactor: backlight
Replaces the initial proof-of-concept frontlight code for T-Echo
Presses less than 5 seconds momentarily illuminate the display
Presses longer than 5 seconds latch the light, requiring another tap to disable
If user has previously removed the T-Echo's capacitive touch button (some DIY projects), the light is controlled by the on-screen menu. This fallback is used by all T-Echo devices, until a press of the capacitive touch button is detected.

* feat: change tile with aux button
Applied to VM-E290.
Working as is, but a refactor of WindowManager::render is expected shortly, which will also tidy code from this push.

* fix: specify out-of-the-box tile assignments
Prevents placeholder applet showing on initial boot, for devices which use a mult-tile layout by default (VM-E290)

* fix: verify settings version when loading

* fix: wrong settings version

* refactor: remove unimplemented argument from requestUpdate
Specified whether or not to update "async", however the implementation was slightly broken, Applet::requestUpdate is only handled next time WindowManager::runOnce is called. This didn't allow code to actually await an update, which was misleading.

* refactor: renaming
Applet::render becomes Applet::onRender.
Tile::displayedApplet becomes Tile::assignedApplet.
New onRender method name allows us to move some of the pre and post render code from WindowManager into new Applet::render method, which will call onRender for us.

* refactor: rendering
Bit of a tidy-up. No intended change in behavior.

* fix: optimize refresh times
Shorter wait between retrying update if display was previously busy.
Set anticipated update durations closer to observed values. No signifacant performance increase, but does decrease the amount of polling required.

* feat: blocking update for E-Ink
Option to wait for display update to complete before proceeding. Important when shutting down the device.

* refactor: allow system applets to lock rendering
Temporarily prevents other applets from rendering.

* feat: boot and shutdown screens

* feat: BluetoothStatus
Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code.

* feat: Bluetooth pairing screen

* fix: InkHUD defaults not honored

* fix: random Bluetooth pin for NicheGraphics UIs

* chore: button interrupts tested

* fix: emoji reactions show as blank messages

* fix: autoshow and notification triggered by outgoing message

* feat: save InkHUD data before reboot
Implemented with a new Observable. Previously, config and a few recent messages were saved on shutdown. These were lost if the device rebooted, for example when firmware settings were changed by a client. Now, the InkHUD config and recent messages saved on reboot, the same as during an intentional shutdown.

* feat: imperial distances
Controlled by the config.display.units setting

* fix: hide features which are not yet implemented

* refactor: faster rendering
Previously, only tiles which requested update were re-rendered. Affected tiles had their region blanked before render, pixel by pixel. Benchmarking revealed that it is significantly faster to memset the framebuffer and redraw all tiles.

* refactor: tile ownership
Tiles and Applets now maintain a reciprocal link, which is enforced by asserts. Less confusing than the old situation, where an applet and a tile may disagree on their relationship. Empty tiles are now identified by a nullptr *Applet, instead of by having the placeholderApplet assigned.

* fix: notifications and battery when menu open
Do render notifications in front of menu; don't render battery icon in front of menu.

* fix: simpler defaults
Don't expose new users to multiplexed applets straight away: make them enable the feature for themselves.

* fix: Inputs::TwoButton interrupts, when only one button in use

* fix: ensure display update is complete when ESP32 enters light sleep
Many panels power down automatically, but some require active intervention from us. If light sleep (ESP32) occurs during a display update, these panels could potentially remain powered on, applying voltage the pixels for an extended period of time, and potentially damaging the display.

* fix: honor per-variant user tile limit
Set as the default value for InkHUD::settings.userTiles.maxCount in nicheGraphics.h

* feat: initial InkHUD support for Wireless Paper v1.1 and VM-E213

* refactor: Heard and Recents Applets
Tidier code, significant speed boost. Possibly no noticable change in responsiveness, but rendering now spends much less time blocking execution, which is important for correction functioning of the other firmware components.

* refactor: use a common pio base config
Easier to make any future PlatformIO config changes

* feat: tips
Show information that we think the user might find helpful. Some info shown first boot only. Other info shown when / if relevant.

* fix: text wrapping for '\n'
Previously, the newline was honored, but the adojining word was not printed.

* Decouple ButtonThread from sleep.cpp
Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables.

* feat: BluetoothStatus
Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code.

* feat: observable for reboot

* refactor: Heltec VM-E290 installDefaultConfig

* fix: random Bluetooth pin for NicheGraphics UIs

* update device-ui: fix touch/crash issue while light sleep

* Collect inkhud

* fix: InkHUD shouldn't nag about timezone (#6040)

* Guard eink drivers w/ MESHTASTIC_INCLUDE_NICHE_GRAPHICS

* Case sensitive perhaps?

* More case-sensitivity instances

* Moar

* RTC

* Yet another case issue!

* Sigh...

* MUI: BT programming mode (#6046)

* allow BT connection with disabled MUI

* Update device-ui

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* MUI: fix nag timeout, disable BT programming mode for native (#6052)

* allow BT connection with disabled MUI

* Update device-ui

* MUI: fix nag timeout default and remove programming mode for native

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* remove debuglog leftover

* Wireless Paper: remove stray board_level = extra (#6060)

Makes sure the InkHUD version gets build into the release zip

* Fixed persistence stragglers from NodeDB / Device State divorce (#6059)

* Increase `MAX_THREADS` for InkHUD variants with WiFi (#6064)

* Licensed usage compliance (#6047)

* Prevent psk and legacy admin channel on licensed mode

* Move it

* Consolidate warning strings

* More holes

* Device UI submodule bump

* Prevent licensed users from rebroadcasting unlicensed traffic (#6068)

* Prevent licensed users from rebroadcasting unlicensed traffic

* Added method and enum to make user license status more clear

* MUI: move UI initialization out of main.cpp and adding lightsleep observer + mutex (#6078)

* added device-ui to lightSleep observers for handling graceful sleep; refactoring main.cpp

* bump lib version

* Update device-ui

* unPhone TFT: include into build, enable SD card, increase PSRAM (#6082)

* unPhone-tft: include into build, enable SD card, increase assigned PSRAM

* lib update

* Backup / migrate pub private keys when upgrading to new files in 2.6 (#6096)

* Save a backup of pub/private keys before factory reset

* Fix licensed mode warning

* Unlock spi on else file doesn't exist

* Update device-ui

* Update protos and device-ui

* [create-pull-request] automated change (#6129)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Proto

* [create-pull-request] automated change (#6131)

* Proto update for backup

* [create-pull-request] automated change (#6133)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Update protobufs

* Space

* [create-pull-request] automated change (#6144)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Protos

* [create-pull-request] automated change (#6152)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Updeet

* device-ui lib update

* fix channel OK button

* device-lib update: fix settings panel -> no scrolling

* device-ui lib: last minute update

* defined(SENSECAP_INDICATOR)

* MUI hot-fix pub/priv keys

* MUI hot-fix username dialog

* MUI: BT programming mode button

* Update protobufs

---------

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com>
Co-authored-by: Jason Murray <jason@chaosaffe.io>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: virgil <virgil.wang.cj@gmail.com>
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com>
Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>
2025-03-01 06:18:33 -06:00
danwelch3
a085614aaa
Initiate magnetometer based compass calibration from button presses (#5553)
* Initiate magenetometer based compass calibration from button presses

- only active for BMX160 accelerometers on RAK_4631
- replace automatic calibration on power on with button triggered
  calibration
- set 5 presses to trigger 30s calibration
- set 6 presses to trigger 60s calibration (useful if unit is not
  handheld, ie vehicle mounted)
- show calibration time remaining on calibration alert screen

* Fix non RAK 4631 builds

- exclude changes from non RAK 4631 builds
- remove calls to screen when not present

* Fix build on RAK4631_eth_gw

- exclude all compass heading updates on variant without screen

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2025-01-16 17:22:27 -06:00
Ben Meadors
d00e0f6911
Convert userprefs to a json file instead of header file which has to be included everywhere (#5471)
* WIP

* Got string quoting and macro expansion working

* Need the placeholder

* Cleanup

* Missed a user prefs reference

* Update jsonc
2024-12-03 06:17:25 -06:00
Michael Gjelsø
d4d89447bd
Adds fixed GPS, BUTTON_PIN and BLE code to userPrefs.h (#5341)
Some checks failed
CI / setup (stm32) (push) Has been cancelled
CI / package-raspbian (push) Has been cancelled
CI / package-raspbian-armv7l (push) Has been cancelled
CI / package-native (push) Has been cancelled
Flawfinder Scan / Flawfinder (push) Has been cancelled
CI / check (push) Has been cancelled
CI / build-esp32 (push) Has been cancelled
CI / build-esp32-s3 (push) Has been cancelled
CI / build-esp32-c3 (push) Has been cancelled
CI / build-esp32-c6 (push) Has been cancelled
CI / build-nrf52 (push) Has been cancelled
CI / build-rpi2040 (push) Has been cancelled
CI / build-stm32 (push) Has been cancelled
CI / after-checks (push) Has been cancelled
CI / gather-artifacts (esp32) (push) Has been cancelled
CI / gather-artifacts (esp32c3) (push) Has been cancelled
CI / gather-artifacts (esp32c6) (push) Has been cancelled
CI / gather-artifacts (esp32s3) (push) Has been cancelled
CI / gather-artifacts (nrf52840) (push) Has been cancelled
CI / gather-artifacts (rp2040) (push) Has been cancelled
CI / gather-artifacts (stm32) (push) Has been cancelled
CI / release-artifacts (push) Has been cancelled
CI / release-firmware (esp32) (push) Has been cancelled
CI / release-firmware (esp32c3) (push) Has been cancelled
CI / release-firmware (esp32c6) (push) Has been cancelled
CI / release-firmware (esp32s3) (push) Has been cancelled
CI / release-firmware (nrf52840) (push) Has been cancelled
CI / release-firmware (rp2040) (push) Has been cancelled
CI / release-firmware (stm32) (push) Has been cancelled
Nightly / Trunk Check Upload (push) Has been cancelled
* userPrefs.h

Added FixedGPS
Added Fixed Bluetooth PIN

* Update NodeDB.cpp

Removed some un-used LOG_INFO

* Added BUTTON_PIN

* Trunk

* Variable re-naming.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-11-14 06:56:22 -06:00
Ben Meadors
50dac38a1b
Pass#2: Lots more savings in logs and string reduction surgery (#5251)
Some checks are pending
CI / setup (rp2040) (push) Waiting to run
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
* Pass#2: Lots more savings in logs and string reduction surgery

* Don't need Thread suffix either

* Warn
2024-11-04 12:16:25 -06:00
Thomas Göttgens
05e4a639a1
remove newline from logging statements. (#5022)
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-10-14 15:11:43 +11:00
Ben Meadors
403e5c304e
Fix: Not being able to stop Ext. Notification nagging for screenless devices (#4899)
* Move logic up to button thread for screen-less devices

* Comment doesn't apply

* Fiddy

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
2024-09-29 07:29:53 -05:00
todd-herbert
a8999d7759
Don't manually clear runAsap flag (#4496) 2024-08-18 07:22:16 -05:00
Jonathan Bennett
d2ea430a3e
Make SPI frequency and TOPHONE queue size configurable on Native (#4369)
* Make SPI frequency configurable on Native

* Make the tophone queue size configurable for Portduino

* The modified SPISettings must be configured in setup(), after config.yaml is processed

* make MeshService a pointer, so we can configure MAX_RX_TOPHONE at run time

* Got a little over excited with refactoring

* Silence a warning
2024-08-01 19:29:49 -05:00
Ben Meadors
c5f2d2736d Whitespace trunk grousing 2024-07-24 21:14:58 -05:00
dylanli
a000a8d347
Support Seeed Tracker-T1000-E (#4303)
* feature-T1000-E: add Added the board definition for T1000-E

-  integrate a script for rapid dependency download that is compatible with both Linux and Windows platforms.
-  add the pin definitions for UART, SPI, GPIO, and other peripherals have been ensured to be correct.
-  add the env configuration for PlatformIO.

* refact-T1000-E: redefine T1000-E board

* feature-T1000-E: add basic sensors

* feature-T1000-E: add button init

* feat: add DRADIOLIB_GODMODE defination for use function setDioAsRfSwitch to DIO LORA RF

* feat : add gps(GNSS_Airoha) sleep mode

* feat: add behavier when rec or send message

* chore: hang IIC bus usage to avoid sensor address conflict

* feat: add sensor data acquisition

* feat : support Airoha GPS

- add disable it in FSM
- update  lookForTime and lookForLocation function

* fix: fix a bug

* version: change version to 0.9.0

* Update tracker-t1000-e.json

Remove a space

* Delete variants/tracker-t1000-e/run_once.sh

Delete not need as we will change platformio.ini

* Update platformio.ini

Update SoftDevice 7.3.0 usage in line with other lr1110 targets

Do we need to keep GODMODE ?

* fix: Button behavier incorrect bug

* fix:remove some invaild code of TextMessageModule

* fix: remove invaild comment

* version: change version to 0.9.1

- update mark's patch
- remove some invaild code and comments
- fix button behavier

* trunk format

* fix:  HELTEC_CAPSULE_SENSOR_V3 block got accidentally deleted

* fix: EnvironmentTelemetry upstream merge went awry.

* fix: Added macro definitions to ensure correct operation of LORA section

* fix :GNSS_AIROHA macro defination in line with others

* fix: upstream backmerge accidentally.

* fix: wrap macro PIN_3V3_EN BUZZER_EN_PIN GNSS_AIROHA in the TRACKER_T1000_E macro guard

---------

Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
2024-07-24 21:10:38 -05:00
Thomas Göttgens
94a10e011c
Merge branch 'master' into wio-lr1110-refresh 2024-07-22 15:37:34 +02:00
Thomas Göttgens
bdd1c53072 Revert "Sync Wio lr1110 refresh with master (#4288)"
This reverts commit 5cc8ca59a3.

Revert "Sync Wio lr1110 refresh with master (#4251)"

This reverts commit d97e6b86b8.

Revert "update SD_FLASH_SIZE to 0x27000 (#4232)"

This reverts commit 2df8093fef.
2024-07-22 15:30:36 +02:00
Tom Fifield
d97e6b86b8
Sync Wio lr1110 refresh with master (#4251)
* Fix protobuf structs handling (#4140)

* Fix protobuf structs handling

* Log instead of assert

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* BLE based logging (#4146)

* WIP log characteristic

* Bluetooth logging plumbing

* Characteristic

* Callback

* Check for nullptr

* Esp32 bluetooth impl

* Formatting

* Add thread name and log level

* Add settings guard

* Remove comments

* Field name

* Fixes esp32

* Open it up

* Whoops

* Move va_end past our logic

* Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151)

* Standardize lat/lon position logs (#4156)

* Standardize lat/lon position logs

* Missed sone and condensed logs

* [create-pull-request] automated change (#4157)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Pause BLE logging during want_config flow (#4162)

* Update NimBLE to 1.4.2 (#4163)

* Implement replies for all telemetry types based on variant tag (#4164)

* Implement replies for all telemetry types based on variant tag

* Remove check for `ignoreRequest`: modules can set this, don't need to check

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Esptool is better

* Explicitly set characteristic

* fix INA3221 sensor (#4168)

- pass wire to begin()
- remove redundant setAddr() (already set in header)

* Show compass on waypoint frame; clear when waypoint deleted (#4116)

* Clear expired or deleted waypoint frame

* Return 0 to CallbackObserver

* Add a missing comment

* Draw compass for waypoint frame

* Display our own waypoints

* [create-pull-request] automated change (#4171)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Add semihosting support for nrf52 devices (#4137)

* Turn off vscode cmake prompt - we don't use cmake on meshtastic

* Add rak4631_dap variant for debugging with NanoDAP debug probe device.

* The rak device can also run freertos (which is underneath nrf52 arduino)

* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135

* fix my botched merge - keep board_level = extra flag for rak3631_dbg

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* [create-pull-request] automated change (#4174)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Display alerts (#4170)

* Move static functions into Screen.h, show compass during calibration

* Move to _fontHeight macro to avoid collision

* Move some alert functions to new alert handler

* Catch missed reboot code

* ESP32 fixes

* Bump esp8266-oled-ssd1306

* Fixes for when a device has no screen

* Use new startAlert(char*) helper class

* Add EINK bits back to alert handling

* Add noop class for no-display devices

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Send file system manifest up on want_config (#4176)

* Send file system manifest up on want_config

* Platform specific methods

* Helps to actually make the change

* Clear

* tell vscode, if formatting, use whatever our trunk formatter wants (#4186)

without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)

Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs.  I guess I'll start letting that happen with
my future commits ;-).

* fix the build - would loop forever if there were no files to send (#4188)

* Show owner.short_name on boot (and E-Ink sleep screen) (#4134)

* Show owner.short_name on boot and sleep screen (on e-ink)

* Update Screen.cpp - new line for short_name

Boot screen short_name now below the region setting.
Looks better on small screens.

* Draw short_name on right

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* nrf52 soft device will watchdog if you use ICE while BT on... (#4189)

so have debugger disable bluetooth.

* correct xiao_ble build preventing sx1262 init (#4191)

* Force a compile time failur if FromRadio or ToRadio get larger than (#4190)

a BLE packet size. We are actually very close to this threshold so
important to make sure we don't accidentally pass it.

* Clear vector after complete config state (#4194)

* Clear after complete config

* Don't collect . entries

* Log file name and size

* [create-pull-request] automated change (#4200)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Make the logs Colorful! (#4199)

* Squash needlessly static functions (#4183)

* Trim extra vprintf and filter for unprintable characters

* Deprecate Router Client role (and make it Client) (#4201)

* [create-pull-request] automated change (#4205)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Move waypoint (#4202)

* Move waypoint screen draw into the waypoint module

* Get the observer set up for the waypoint screen draw

* Static squashing: screen dimensions
Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class.

* Move getCompassDiam into Screen class
(supress compiler warnings)
At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance.
This is probably just another band-aid until these static functions all move.

* Use new getCompassDiam function in AccelerometerThread

* Properly gate display code in WaypointModule

---------

Co-authored-by: Todd Herbert <herbert.todd@gmail.com>

* Fix flakey phone api transition from file manifest to complete (#4209)

* Try fix flakey phone api transition from file manifest to complete

* Skip

* enable colors in platformio serial monitor (#4217)

* When talking via serial, encapsulate log messages in protobufs if necessary (#4187)

* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.

* remove NoopPrint - it is no longer needed

* when talking to API clients via serial, don't turn off log msgs instead encapsuate them

* fix the build - would loop forever if there were no files to send

* don't use Segger code if not talking to a Segger debugger

* when encapsulating logs, make sure the strings always has nul terminators

* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.

* Important to not print debug messages while writing to the toPhone scratch buffer

* don't include newlines if encapsulating log records as protobufs

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* [create-pull-request] automated change (#4218)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* Fix SHT41 support (#4222)

* Add SHT41 Serial to I2c Detection Code

On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being
incorrectly detected as SHT31.

This patch adds the necessary serial number for the SHT41 chip to
be correctly detected.

fixes meshtastic/firmware#4221

* Add missing sensor read for SHT41

* Typo fix in logs - mhz - MHz (#4225)

As reported by karamo, a few different places in our logs had
incorrect capitalization of MHz.

fixes meshtastic/firmware#4126

* New new BLE logging characteristic with LogRecord protos  (#4220)

* New UUID

* New log radio characteristic with LogRecord protobuf

* LogRecord

* Merge derp

* How did you get there

* Trunk

* Fix length

* Remove assert

* minor cleanup proposal (#4169)

* MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup...
Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI
flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI
to 0).  Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside
configuration.h

* cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET
We already had HAS_NETWORKING as flag in MQTT to mean 'we have
tcpip'.  Generallize that and move it into configuration.h so that
we can use it elsewhere.

* Use #pragma once, because supported by gcc and all modern compilers
instead of #ifdef DOTHFILE_H etc...

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>

* Add PowerMon support (#4155)

* Turn off vscode cmake prompt - we don't use cmake on meshtastic

* Add rak4631_dap variant for debugging with NanoDAP debug probe device.

* The rak device can also run freertos (which is underneath nrf52 arduino)

* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135

* powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 )

* oops - mean't to mark the _dbg variant as an 'extra' board.

* powermon wip

* Make serial port on wio-sdk-wm1110 board work
By disabling the (inaccessible) adafruit USB

* Instrument (radiolib only for now) lora for powermon
per https://github.com/meshtastic/firmware/issues/4136

* powermon gps support
https://github.com/meshtastic/firmware/issues/4136

* Add CPU deep and light sleep powermon states
https://github.com/meshtastic/firmware/issues/4136

* Change the board/swversion bootstring so it is a new "structured" log msg.

* powermon wip

* add example script for getting esp S3 debugging working
Not yet used but I didn't want these nasty tricks to get lost yet.

* Add PowerMon reporting for screen and bluetooth pwr.

* make power.powermon_enables config setting work.

* update to latest protobufs

* fix bogus shellcheck warning

* make powermon optional (but default enabled because tiny and no runtime impact)

* tell vscode, if formatting, use whatever our trunk formatter wants
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)

Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs.  I guess I'll start letting that happen with
my future commits ;-).

* add PowerStress module

* nrf52 arduino is built upon freertos, so let platformio debug it

* don't accidentally try to Segger ICE if we are using another ICE

* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.

* remove NoopPrint - it is no longer needed

* when talking to API clients via serial, don't turn off log msgs instead encapsuate them

* fix the build - would loop forever if there were no files to send

* don't use Segger code if not talking to a Segger debugger

* when encapsulating logs, make sure the strings always has nul terminators

* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.

* Important to not print debug messages while writing to the toPhone scratch buffer

* don't include newlines if encapsulating log records as protobufs

* update to latest protobufs (needed for powermon goo)

* PowerStress WIP

* fix linter warning

* Cleanup buffer

* Merge hex for wm1110 target(s)

* Only sdk

* Sudo

* Fix exclude macros (#4233)

* fix MESHTASTIC_EXCLUDE_BLUETOOTH

* fix HAS_SCREEN=0

* fix MESHTASTIC_EXCLUDE_GPS

* fix typo in build-nrf52.sh (#4231)

chmod is the command, '+x' is the argument.

* Tidy Wireless Paper variant files (#4238)

* Quick tidy of pins_arduino.h
Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480)

* Tidy variant.h

* Change deprecated ADC attenuation parameter
From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12`

* Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243)

* Fix BLE logging on nrf52 (#4244)

* allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types

This allows 'lossless' log reading.  If client has requested INDICATE
(rather than NOTIFY) each log record emitted via log() will have to fetched
by the client device before the meshtastic node can continue.

* Fix serious problem with nrf52 BLE logging.
When doing notifies of LogRecords it is important to use the
binary write routines - writing using the 'string' write won't work.
Because protobufs can contain \0 nuls inside of them which if being
parsed as a string will cause only a portion of the protobuf to be sent.
I noticed this because some log messages were not getting through.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

* Fix build when HAS_NETWORKING is false on nrf52 (#4237)

(tested on a rak4631 by setting HAS_ETHERNET false when shrinking
image)

* If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246)

* Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248)

* Update variant.h

* Update wio-tracker-wm1110.json

* Update wio-sdk-wm1110.json

* Update platformio.ini

* Update platformio.ini

* Add files via upload

* Add files via upload

* Update variant.h

---------

Co-authored-by: Mike <mikhael.skvortsov@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Mike G <mkgin@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Warren Guy <5602790+warrenguy@users.noreply.github.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Alexander <156134901+Dorn8010@users.noreply.github.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: quimnut <github@dopegoat.com>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Agent Blu, 006 <blu006@ucr.edu>
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
2024-07-08 06:03:23 -05:00
Jonathan Bennett
0425551341
Display alerts (#4170)
* Move static functions into Screen.h, show compass during calibration

* Move to _fontHeight macro to avoid collision

* Move some alert functions to new alert handler

* Catch missed reboot code

* ESP32 fixes

* Bump esp8266-oled-ssd1306

* Fixes for when a device has no screen

* Use new startAlert(char*) helper class

* Add EINK bits back to alert handling

* Add noop class for no-display devices

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-06-25 11:26:02 -05:00
Thomas Göttgens
ecf5519b56 Moar LR1110 Targets 2024-06-20 16:26:04 +02:00
Heltec-Aaron-Lee
5b1d3ed173 Add Heltec Capsule Sensor V3 to source code 2024-06-12 20:21:26 +08:00
todd-herbert
338244de32
Wake screen on first press (#4052) 2024-06-07 07:28:29 -05:00
todd-herbert
5e160b21c7
T-Echo screen and button performance (#3840)
* Make button timing configurable per variant

* Adjust button timing for T-Echo
Easier multi-clicks for features like "toggle backlight" (4x click)

* Fewer full-refreshes for T-Echo display
Disables ghost pixel tracking: T-Echo ghost pixels are fairly faint.
2024-05-09 08:14:58 -05:00
todd-herbert
75dc8cccec
Button ISR runs thread asap (#3801) 2024-05-08 16:08:24 -05:00
todd-herbert
21311bbeda
T-Echo touch button no longer requires "wake on tap or motion" (#3745) 2024-04-29 08:54:57 -05:00
Ben Meadors
e683d8f552
Rebrand "send network ping" to more honest "try send position" with better output (#3737) 2024-04-27 08:55:04 -05:00
todd-herbert
8e29efcb50
Fix button interrupt after light sleep (#3587)
* Make ButtonThread instance extern
Previously was a static local instance in setup(). Now declared in ButtonThread.cpp, accessible via extern declaration in ButtonThread.

* Extract attachInterrupt() calls to public method; create matching method for detachInterrupt()

* Change suspension of button interrupts for light-sleep

* Fix declaration for ARCH_PORTDUINO

* Remove LOG_DEBUG used during testing

* Don't assume device has a button..

* Guard entire constructor code

* Don't use BUTTON_PIN with ARCH_PORTDUINO

---------

Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
2024-04-11 07:02:50 -05:00
todd-herbert
5b5f9c62b5
Remap backlight toggle and touch button (#3560)
* Update E-Ink display after sending adhoc ping or disable/enable GPS

* Resume display updates when touch button pressed

* Use touch hold as modifier; change double-click behavior for user button

* Fix preprocessor exclusions

* Purge backlight behavior

* Distinguish between 3x and 4x multi-presses

* Touch button considers "Wake screen on tap or motion" user-setting

* Don't assume device has BUTTON_PIN

* Rename misleading method
2024-04-06 08:04:26 -05:00
Jim Whitelaw
acc32916c3
Add multiple configuration options for a minimized build (GPS,WiFi,BT,MQTT,Screen). (#3469)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-03-25 06:33:57 -05:00
Manuel
30507f5125
refactored ButtonThread, fix IRQ issues (#3214)
* refactored  ButtonThread, fix IRQ issues

* fix copy&paste syntax error
2024-02-12 16:44:21 -06:00