* DropzoneModule hello world
* Buttoning things up
* Exclude by default
* Upstream refs
* Cleanup
* Add modules folder to path
* Case and path matters
* Exclude from header
* Guard
* started work on pulling in the unphone library and dependencies, to do e.g. power switch management and etc.; currently failing at Adafruit_ImageReader
* now compiles with unphoneLibrary included
* successfully pulled in unphone library to manage power switch and init vibe motor and etc.
doesnt print to serial tho...
* simplified the build a bit; when doing meshtastic do not depend on the MCCI lora libs etc., then also no need to config them via build flags
* version that doesnt trigger brownout
* cleaned up initVariant a little
* note re. GPS
* back to mesh upstream version
* this time we're back to mesh upstream version
* getting LSM6DS3TRC driver installed
* shake to wake works, set threshold quite low may need increasing
* whats the crack with these end of file changes?
* paramatize the wake threshold
* try to get the PR to just include real changes
* got the right config item and also not giving compiler messages
* moved the lib_deps for the LSM6DS3TRC driver from our variant platformio.ini to the main one in root so all boards have it
* stuupid error #define-ing
---------
Co-authored-by: Hamish Cunningham <hamish@gate.ac.uk>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* compiling w/o e-ink display
* pinout changes
* progress getting LoRa and LCD working
* fix for bootloader, gps pins
* add canary to build matrix
* merge with main
* fix build by excluding BellModem in RadioLib
* fixes for GPS
* Fix LED_BLUE and GPS RX/TX pins
* Variant changes for merge
* make GPS baud rate configurable
* fix debug config
* Canary v1.2 changes
* Fixes for GPS
* pass trunk check
* bump protobufs to master
* update build flags to use CANARYONE enum
* use canaryone throughout for consistency.
* #define 0 is still defined
* add back .vscode/extensions.json
* bump protobufs
* revert manual change to generated file
---------
Co-authored-by: Steven Osborn <steven@lolsborn.com>
* feat(variants): Add support for TXCO on TLORA_V2_1_6 devices
* chore: remove long comment
* feat(variants): Add tlora-v2-1-1_6-tcxo to build matrix
* feat(variants): Use RADIOLIB_NC as DIO1 pin for tlora_v2_1_16 with TXCO
* Use generic naming scheme, add variant to build envs
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* Add Chatter 2 default_envs
* Add Chatter 2 to varients
* Add Chatter 2 specific code to esp32 platform code
* Parameterize TFT_INVERT for Chatter 2 and specify setRotation to 1
* Fix formatting to make Trunk happy
* Remove commented out #define USE_LCC68
* Fix formatting again
* Add chatter2 to the CI matrix
---------
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* INA3221 library branch to support negative values
Original INA3221 library does not handle negative values properly due to mishandling of signed bits in sensor reading and processing. I have branched the library, changed the code, and tested with several deployed nodes to confirm functionality.
* Update INA3221 library reference to use version tag
Updated my library repo to reflect a version tag properly per request by meshtastic code reviewer
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add support for the rak10701 board, no touch
* Moved tftblack fillin and changed teh src flags
* Added rak10701 to platformio.ini
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix for T-Beam 1.2 GPS, with DEBUG enabled
* Don't break other devices
* Saving GPS data on this breaks on next boot. Fix.
* derp
* disable the extra verbosity
* Try the same sort of factory reset as the Lilygo image
* Catch GPS reboots and squash
* trunk
* GPS
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* T-Watch WIP
* Updates
* Temp
* Update screen spi bus and and backlight en
* Peripherals progress
* Fixes
* Fixes
* Updates
* DRV scaffolding
* Fixed touch-screen driver selection. WIP on DRV haptic feedback
* DRV2605 pmu channel
* Trunk
* Fixes and defaults
* Dropped an s
* Move PMU and turn off screen that way
* Add t-deck and t-watch-s3 to CI and cleanup
* More cleanup
* Bump RadioLib to 6.1.0
* RP2040
* More excludes
* Jan added a lot of stuff apparently
* Stay back a version on portduino for now
* It wasn't this. I need to remove the docker build from ci
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* LittleFS compiles. Can't check with actual device.
* make cppcheck happy again
* Guard against accelerometer thread
* Missed a spot
* Upload via ST-LINK
* Derive MAC address from UID
* upload port
* Trunk it
* Guard it
* Maybe fix the cache error on startup.
* Latest RadioLib ref to fix SubGHZ
* revert nasty Sub-GHz Hack
* Boots and radio inits with RadioLib 6.0, LittleFS doesn't seem to work
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
* 6.1.0
* Update libs
* Update nrf52 while we're at it
* Remove temporary heltec platform packages
* Update install scripts to flash s3 ota partition bin
* Add HEADER_VALID IRQ flag for SX126x/8x to detect actively receiving
Needs new RadioLib commit
* Update comments
* Use latest RadioLib release
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add support for SX1281 on 2.4 GHz
* only allow wide BW settings when the right chip is detected
* portduino cannot use this chip yet as it uses an old modified version of radiolib
* missed a spot
* Attempt to supress false positive
* Attempt to supress false positive
* Trying casing from the cpp-check manual
* Trying casing from the cpp-check manual
* Inline suppr should be default but...
* Maybe casting it will make the damn thing shut up
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
