* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
* GPS rework, changes for M8 and stub for M10
* Add VALSET commands for u-blox M10 receivers
* Add VALSET commands for u-blox M10 receivers
tweak M8 commands
add comments for VALSET configuration commands
* Add commands to init M10 receivers,
tweak the M8 init sequence, this is a WIP as there are still some issues during init.
Add M10 version of PMREQ.
* Add wakeup source of uartrx to PMREQ_10
The M10 does not respond to commands when asleep,
may need to do this for the M8 as well
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
* GPS rework, changes for M8 and stub for M10
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix for T-Beam 1.2 GPS, with DEBUG enabled
* Don't break other devices
* Saving GPS data on this breaks on next boot. Fix.
* derp
* disable the extra verbosity
* Try the same sort of factory reset as the Lilygo image
* Catch GPS reboots and squash
* trunk
* GPS
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor GPS to not probe if pins not defined
* Use Named Constructor to clean up code
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
* Cleanup and remove dead code
* Rename GPS_PIN_WAKE to GPS_PIN_STANDBY
* Actually put GPS to sleep between fixes
* add GPS_POWER_TOGGLE for heltec-tracker and t-deck
* Change GPS_THREAD_INTERVAL to 200 ms
* More dead code, compiler warnings, and add returns
* Add Number of sats to log output
* Add pgs enable and triple-click config
* Track average GPS fix time to judge low-power time
* Feed PositionModule on GPS fix
* Don't turn off the 3v3_s line on RAK4631
when the rotary is present.
* Add GPS power standbyOnly option
* Delay setting time currentQuality
to avoid strange log message.
* Typos, comments, and remove unused variable
* Short-circuit the setAwake logic on GPS disable
* heltec-tracker 0.3 GPS power saving
* set en_gpio to defined state
* Fix fixed_position logic with GPS disabled
* Don't process GPS serial when not isAwake
* Add quirk for Heltec Tracker GPS powersave
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* Use UINT32_MAX to indicate no configured GPS
* Refactor GPS to not probe if pins not defined
* Minor cleanups related to rework
* Use Named Constructor to clean up code
* Actually disable the GPS thread
* Don't actually disable the GPS thread
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* First attempt at lazy config of GPS
* More GPS rework
Break GPS init into smaller, interruptable steps
Move more GPS commands into ubx.h
Combine Setup functions
* Move the rest of UBX messages to ubs.h
* Add GNSS model recognition function
* Fix GNSS initialization failure
* GPS.cpp difference between runOnce and ESP32S3 and ESP32 versions
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* First steps to unify GPS Lib for RAK 1910 and RAK 12500
* Technicalities. Out with the old and build the new.
* Adapt Matrix
* We use 0.4.5 now
* While we're at it, yank the RAK815, it's EOL
* Satisfy CI - for now
* - yank UBX library, talk to GPS chip with NMEA only.
- more autodetect going on, this time for the Eink Display.
TODO: actually do something with the scan findings.
* i swear this works on windows! :-)
* these are only there to make CI happy
* don't update eink display if not detected.
* Replace Oberon Crypt Library with modified Adafruit Library. This elimintaes the need for the sdk-nfxlib submodule.
* - Revert auto screen selection (incomplete)
- Revert nrF crypto engine (needs more work)
- add separate defines for not-auto-selecting screen lib.
* Define 2 new variants for RAK - with or without epaper
* Update variants
Co-authored-by: Sacha Weatherstone <sachaw100@hotmail.com>
Co-authored-by: Ben Meadors <thebentern@tuta.io>
