124 Commits

Author	SHA1	Message	Date
Chloe Bethel	b5a8e8f51b	DEBUG_MUTE correctness (#7492) ... * treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE * stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-29 08:51:38 +10:00
Jonathan Bennett	a6be2e46ed	2.7 fixes w2 (#7148) ... * Initial work on splitting notification renderer into components for reuse * More progress * Fix notification popup * more fix, less crash * Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar * Small changes for EInk to not crowd elements * Change System frame menu over to better match actions; added color picker for T114 * Fix build errors and add T190 for testing * Logic gates are hard sometimes * Screen Color Picker changes, defined Yellow as a Color. * Additional colors and tuning * Abandon std::sort in NodeDB, and associated fixes (#7175) * Generate short name for nodes that don't have user yet * Add reboot menu * Sort fixes * noop sort option to avoid infinite loop * Refactor Overlay Banner * Continuing work on Color Picker * Add BaseUI menus to add and remove Favorited Nodes * Create TFT_MESH_OVERRIDE for variants.h and defined colors * Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot. * T114 defaults to White, Yellow is now bright Yellow * Revert "T114 defaults to White, Yellow is now bright Yellow" This reverts commit 8d05e17f11. * Only show OEM text if not OLED * Adjust OEM logo to maximize visible area * Start plumbing in Color Picker changes * Finished plumbing * Fix warning * Revert "Fix warning" This reverts commit 2e8aecd52d. * Fix display not fully redrawing * T-Deck should get color too * Emote Revamp * Update emotes.cpp * Poo Emote fix * Trunk fix * Add secret test menu and number picker * Missed bits * Save colors between reboots * Save Clock Face election to protobuf * Make reboot first, then settings * Add padding for single line pop-ups * Compass saving and faster menus * Resolve build issue with Excluding GPS * Resolve issue with memory bars on EInk * Add brightness settings for supported screen (#7182) * Add brightness menu. * add loop destination selection. * Bring back color (and sanity) to the menus! * Trunk --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Wilson <m.tools@qq.com>	2025-07-02 20:50:49 -05:00
Jason P	29e7a71c97	2.7 Miscellaneous Fixes - Week 1 (#7102) ... * Update Favorite Node Message Options to unify against other screens * Rebuild Horizontal Battery, Resolve overlap concerns * Update positioning on Message frame and fix drawCommonHeader overlay * Beginnings of creating isHighResolution bool * Fixup determineResolution() * Implement isHighResolution in place of SCREEN_WIDTH > 128 checks * Line Spacing bound to isHighResolution * Analog Clock for all * Add AM/PM to Analog Clock if isHighResolution and not TWatch * Simple Menu Queue, and add time menu * Fix prompt string for 12/24 hour picker * More menu banners into functions * Fix Action Menu on Home frame * Correct pop-up calculation size and continue to leverage isHighResolution * Move menu bits to MenuHandler * Plumb in the digital/analog picker * Correct Clock Face Picker title * Clock picker fixes * Migrate the rest of the menus to MenuHandler.* * Add compass menu and needle point option * Minor fix for compass point menu * Correct Home menu into typical format * Fix emoji bounce, overlap, and missing commonHeader * Sanitize long_names and removed unused variables * Slightly better sanitizeString variation * Resolved apostrophe being shown as upside down question mark * Gotta keep height and width in expected order * Remove Second Hand for Analog Clock on EInk displays * Fix Clock menu option decision tree * Improvements to Eink Navigation * Pause Banner for Eink moved to bottom * Updated working for 12-/24-hour menu and Added US/Arizona to timezone picker * Add Adhoc Ping and resolve error with std::string sanitized * Hide quick toggle as option is available within Action Menu, commented out for the moment * Remove old battery icon and option, use drawCommonHeader throughout, re-add battery to Clock frames * fix misc build warnings. NFC * Update Analog Clock on EInk to show more digits * Establish Action Menu on all node list screens, add NodeDB reset (with confirmation) option * Add Toggle Backlight for EInk Displays * Suppress action screen Full refresh for Eink * Adjust drawBluetoothConnectedIcon on TWatch * Maintain clock frame when switching between Clock Faces * Move modules beyond the clock in navigation * addressed the conflicts, and changed target branch to 2.7-MiscFixes-Week1 * cleanup, cheers * Add AM/PM to low resolution clock also * Small adjustments to AM/PM replacement across various devices * Resolve dangling pointer issues with sanitize code * Update comments for Screen.cpp related to module load change * Trunk runs * Update message caching to correct aged timestamp * Menu wording adjustments * Time Format wording * Use all the rows on EInk since with autohide the navigation bar * Finalize Time Format picker word change * Retired drawFunctionOverlay code No longer being used * Actually honor the points-north setting * Trunk * Compressed action list * Update no-op showOverlayBanner function * trunk * Correct T_Watch_S3 specific line * Autosized Action menu per screen * Finalize Autosized Action menu per screen * Unify Message Titles * Reorder Timezones to match expectations * Adjust text location for pop-ups * Revert "Actually honor the points-north setting" This reverts commit 20988aa4fa. * Make NodeDB sort its internal vector when lastheard is updated. Don't sort in NodeListRenderer * Update src/graphics/draw/NodeListRenderer.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Pass by reference -- Thanks Copilot! * Throttle sorting just a touch * Check more carefully for own node * Eliminate some now-unneeded sorting * Move function after include * Putting Modules back to position 0 and some trunk checks found * Add Scrollbar for Action menus * Second attempt to move modules down the navigation bar * Continue effort of moving modules in the navigation * Canned Messages tweak * Replicate Function + Space through the Menu System * Move init button parameters into config struct (#7145) * Remove bundling of web-ui from ESP32 devices (#7143) * Fixed triple click GPS toggle bungle * Move init button parameters into config struct * Reapply "Actually honor the points-north setting" This reverts commit 42c1967e7b. * Actually do compass pointings correctly * Tweak to node bearings * Menu wording tweaks * Get the compass_north_top logic right * Don't jump frames after setting Compass * Get rid of the extra bearingTo functions * Don't blink Mail on EInk Clock Screens * Actually set lat and long * Calibrate * Convert Radians to Degrees * More degree vs radians fixes * De-duplicate draw arrow function * Don't advertise compass calibration without an accell thread. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: csrutil <keming.cao@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-26 22:11:20 -05:00
Jonathan Bennett	4feaec651f	Unify the native display config between legacy display and MUI (#6838) ... * Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-21 06:36:04 -05:00
Justin E. Mann	2fb46ce5d5	Add rak12035 VB Soil Monitor Tested & Working (#6741) ... * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * Update to 1.0.4 release of RAK12035_SoilMoisture * cleanup * cool * . * .. * little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500 looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500. improvements could be made around the configuration of the monitor. next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity. * . comments about current limitations and TODOs * trunk update * trying to autoformat.. * fix formatting attempt 2 * .. * ... * ... * . * some corrections and local build success * correction in temp code * grr formatting * cleanup after a few experiments * remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos. * update some values in varient for rak wistap * working out trunk formatting.. * wip . corrections to other build variants * . * protobuffs? * protobufs? * Update protobufs ref * Protobufs ref * Trunk * Update RAK12035Sensor.cpp * Fmt * comment changes * dumb mistakes... resolved, actually built and tested.. all good.. * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * . proto submod * proto * proto * merge master * mabe a fix for GPS pin conflict, waiting on a new gps module to try * merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035 * . * . --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-19 18:51:03 -05:00
dmarman	cb9429e83e	Added full support for LTR390UV readings of UV and Lux (#6872) ... * Added full support for LTR390UV readings of UV and Lux * Trunk formatting * Added full support for LTR390UV readings of UV and Lux * Trunk formatting * fix library check and unnecessary bit resolution change * fixed log info messages and removed unused dependency * Hopefully fixes git mess * fix variable scope and getMetrics returns * set metrics flags bavk to false in case something wrong happens while reading LTR390UV mode --------- Co-authored-by: Domingo <domingo@waxman.local> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-29 09:09:33 -05:00
Michael Cullen	7d95b487ef	Add PCT2075 Temperature Sensor (#6829) ... This is an I2C temperature sensor. It is intended to be a drop-in compatible sensor for the LM75, however it is more accurate. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-25 07:29:02 -05:00
Ben Meadors	981ecfdb61	Add client notification before role based power saving (sleep) (#6759) ... * Add client notification before role based power saving (sleep) * Unsigned	2025-05-07 21:20:32 -05:00
Jonathan Bennett	473ef1bc03	Step one of Linux Sensor support (#6673) ... * First addition of __has_include for sensor support * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Make TelemetrySensor::setup() a pure virtual finction * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Enable HAS_SENSOR for Portduino * Move back to Adafruit BusIO after patch	2025-04-28 18:35:13 -05:00
Thomas Göttgens	0951fdd49b	Add support for Heltec HRI-3621 industrial sensor hub (#6366)	2025-03-21 16:12:49 +01:00
Chris Danis	f5e0e282b6	environment: add DPS310 high-accuracy barometer (#6237) ... * dps310: initial scan support * dps310 sensor support * new protobufs * new protobufs * address cr --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-06 11:58:18 +08:00
GUVWAF	4747e73f37	Space out periodic broadcasts of modules automatically (#5931) ... * Space out periodic broadcasts of modules automatically * Add warning for function usage --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-01-26 13:59:59 -06:00
Thomas Göttgens	973b453d43	Update RAK2560 code (#5844) ... * * Update RAK9154 sensor to tx remote power telemetry * remove uf2 script, pio run does that inline * move sensor module to correct position * disable LED and Accelerometer code on rak2560 * trunk fmt * mention epaper variant * attention, revert, revert * Enable Environment Telemetry of these values * fix float values	2025-01-20 09:34:54 +01:00
Thomas Göttgens	b353bcc04a	fix detection of lark weather station and add rain sensor (#5874) ... * fix detection of lark weather station * fix unit tests and add support for Dfrobot rain gauge * fix name display on bootup * fix gauge init logic * trunk fmt	2025-01-18 14:10:13 +01:00
todd-herbert	4cd2ba5479	More lines of environmental telemetry on-screen (#5853)	2025-01-16 23:23:57 +13:00
isseysandei	038430db23	Environmental sensors page scrolling (#5847) ... * env scrolling first iteration * ran trunk	2025-01-14 09:00:00 +08:00
isseysandei	89a9e0b99d	Added illuminance sensors to the node's environmental sensor page (#5832) ... * illuminance sensors added * added white_lux to debug	2025-01-13 16:39:01 +08:00
Thomas Göttgens	a2a6b236b7	support indicator sensors through Rp2040 serial (#5696) ... * support indicator sensors through Rp2040 serial * disable excessive debug printing	2024-12-30 21:28:31 +01:00
Ben Meadors	31a5b9c122	Cleanup and exclude external sensor macro to make T1000-E binaries much smaller	2024-12-28 08:30:53 -06:00
jake-b	932966b896	Support for the ClimateGuard RadSens Geiger-Muller tube (#5425)	2024-11-24 13:53:52 +01:00
Ben Meadors	a84324c4fa	Don't attempt to save NodeDB on low-batt shutdown to prevent FS corruption (#5312)	2024-11-12 06:17:26 -06:00
Tavis	aa184e6d8b	copy the has_relative_humidity value to telem packet from AHTX0 packet (#5277) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-08 07:59:36 +08:00
Ben Meadors	f769c50fa5	More reduction (#5256) ... * Now with even fewer ings * Ye * Mo * QMA6100PSensor	2024-11-04 19:15:59 -06:00
Ben Meadors	50dac38a1b	Pass#2: Lots more savings in logs and string reduction surgery (#5251) ... * Pass#2: Lots more savings in logs and string reduction surgery * Don't need Thread suffix either * Warn	2024-11-04 12:16:25 -06:00
Tom Fifield	276067065e	Log cleanups (#5135) ... * Log cleanups change log levels, shorten log messages, delete commented out logs * Address comments from review * Remove full stops * EDEBUG --> DEBUG	2024-11-04 06:09:23 -06:00
Thomas Göttgens	05e4a639a1	remove newline from logging statements. (#5022) ... remove newline from logging statements in code. The LOG_* functions will now magically add it at the end. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-14 15:11:43 +11:00
Tom Fifield	bb9f003c24	Switch EnvironmentTelemetry to use UnitConversions (#4972) ... We already have a central class for unit conversions, switch EnvironmentTelemetry to that in preparation for HealthTelemetry.	2024-10-06 07:55:21 -05:00
Tom Fifield	553e572eb5	Coalesce duplicated method GetTimeSinceMeshPacket (#4968) ... GetTimeSinceMeshPacket was duplicated in PowerTelemetry and EnvironmentalTelemetry, albeit one had a cooler name than the other. As we add HealthTelemetry, to avoid creating a third instance of this method, let's move it somewhere that makese sense. Adds a new method GetTimeSinceMeshPacket to MeshService and updates EnvironmentTelemetry and PowerTelemetry to use it.	2024-10-06 06:40:06 -05:00
Thomas Göttgens	12481b568a	fix a lot of nuisances reported by cppcheck (#4872) ... * fix a lot of nuisances reported by cppcheck * fix portduino	2024-09-25 19:09:06 -05:00
Ben Meadors	baf9cf5a59	Encapsulate RadioLibInterface receive IRQ logic (#4866) ... * Encapsulate RadioLibInterface receive IRQ logic * More concise * Trunk	2024-09-25 16:19:18 -05:00
David	40b3dbaa70	Add MAX17048 lipo fuel gauge (#4851) ... * Initial commit * Update MAX17048Sensor.cpp * Update EnvironmentTelemetry.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-25 05:34:53 -05:00
Ben Meadors	e8829b8f52	Refactor and consolidate time window logic (#4826) ... * Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-09-23 08:58:14 -05:00
David	644e213b13	Added a singleton wrapper for bmp3xx	2024-08-31 18:15:33 +10:00
David	47e1580a62	Integration test	2024-08-29 16:40:17 +02:00
David	fc1e60ac58	Initial upload	2024-08-29 16:40:17 +02:00
Ben Meadors	e61bd84116	Send local stats telemetry to phone every 15 minutes (#4475) ... * Send local stats telemetry to phone every 10 minutes * Add debug log and bump to 15 minutes * Tronk * Explicit has_ optional	2024-08-16 17:15:51 -05:00
Ben Meadors	efc27f2051	Initial telemetry with time and variant tags (#4463)	2024-08-14 16:24:28 -05:00
Jonathan Bennett	d2ea430a3e	Make SPI frequency and TOPHONE queue size configurable on Native (#4369) ... * Make SPI frequency configurable on Native * Make the tophone queue size configurable for Portduino * The modified SPISettings must be configured in setup(), after config.yaml is processed * make MeshService a pointer, so we can configure MAX_RX_TOPHONE at run time * Got a little over excited with refactoring * Silence a warning	2024-08-01 19:29:49 -05:00
dylanli	a000a8d347	Support Seeed Tracker-T1000-E (#4303) ... * feature-T1000-E: add Added the board definition for T1000-E - integrate a script for rapid dependency download that is compatible with both Linux and Windows platforms. - add the pin definitions for UART, SPI, GPIO, and other peripherals have been ensured to be correct. - add the env configuration for PlatformIO. * refact-T1000-E: redefine T1000-E board * feature-T1000-E: add basic sensors * feature-T1000-E: add button init * feat: add DRADIOLIB_GODMODE defination for use function setDioAsRfSwitch to DIO LORA RF * feat : add gps(GNSS_Airoha) sleep mode * feat: add behavier when rec or send message * chore: hang IIC bus usage to avoid sensor address conflict * feat: add sensor data acquisition * feat : support Airoha GPS - add disable it in FSM - update lookForTime and lookForLocation function * fix: fix a bug * version: change version to 0.9.0 * Update tracker-t1000-e.json Remove a space * Delete variants/tracker-t1000-e/run_once.sh Delete not need as we will change platformio.ini * Update platformio.ini Update SoftDevice 7.3.0 usage in line with other lr1110 targets Do we need to keep GODMODE ? * fix: Button behavier incorrect bug * fix:remove some invaild code of TextMessageModule * fix: remove invaild comment * version: change version to 0.9.1 - update mark's patch - remove some invaild code and comments - fix button behavier * trunk format * fix: HELTEC_CAPSULE_SENSOR_V3 block got accidentally deleted * fix: EnvironmentTelemetry upstream merge went awry. * fix: Added macro definitions to ensure correct operation of LORA section * fix :GNSS_AIROHA macro defination in line with others * fix: upstream backmerge accidentally. * fix: wrap macro PIN_3V3_EN BUZZER_EN_PIN GNSS_AIROHA in the TRACKER_T1000_E macro guard --------- Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2024-07-24 21:10:38 -05:00
Thomas Göttgens	7568a35372	fix build and probably break GPS	2024-07-22 17:09:46 +02:00
Thomas Göttgens	94a10e011c	Merge branch 'master' into wio-lr1110-refresh	2024-07-22 15:37:34 +02:00
Thomas Göttgens	bdd1c53072	Revert "Sync Wio lr1110 refresh with master (#4288)" ... This reverts commit 5cc8ca59a3. Revert "Sync Wio lr1110 refresh with master (#4251)" This reverts commit d97e6b86b8. Revert "update SD_FLASH_SIZE to 0x27000 (#4232)" This reverts commit 2df8093fef.	2024-07-22 15:30:36 +02:00
Tom Fifield	5cc8ca59a3	Sync Wio lr1110 refresh with master (#4288) ... * Fix protobuf structs handling (#4140) * Fix protobuf structs handling * Log instead of assert --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * BLE based logging (#4146) * WIP log characteristic * Bluetooth logging plumbing * Characteristic * Callback * Check for nullptr * Esp32 bluetooth impl * Formatting * Add thread name and log level * Add settings guard * Remove comments * Field name * Fixes esp32 * Open it up * Whoops * Move va_end past our logic * Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151) * Standardize lat/lon position logs (#4156) * Standardize lat/lon position logs * Missed sone and condensed logs * [create-pull-request] automated change (#4157) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Pause BLE logging during want_config flow (#4162) * Update NimBLE to 1.4.2 (#4163) * Implement replies for all telemetry types based on variant tag (#4164) * Implement replies for all telemetry types based on variant tag * Remove check for `ignoreRequest`: modules can set this, don't need to check --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Esptool is better * Explicitly set characteristic * fix INA3221 sensor (#4168) - pass wire to begin() - remove redundant setAddr() (already set in header) * Show compass on waypoint frame; clear when waypoint deleted (#4116) * Clear expired or deleted waypoint frame * Return 0 to CallbackObserver * Add a missing comment * Draw compass for waypoint frame * Display our own waypoints * [create-pull-request] automated change (#4171) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add semihosting support for nrf52 devices (#4137) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * fix my botched merge - keep board_level = extra flag for rak3631_dbg --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4174) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Display alerts (#4170) * Move static functions into Screen.h, show compass during calibration * Move to _fontHeight macro to avoid collision * Move some alert functions to new alert handler * Catch missed reboot code * ESP32 fixes * Bump esp8266-oled-ssd1306 * Fixes for when a device has no screen * Use new startAlert(char*) helper class * Add EINK bits back to alert handling * Add noop class for no-display devices --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Send file system manifest up on want_config (#4176) * Send file system manifest up on want_config * Platform specific methods * Helps to actually make the change * Clear * tell vscode, if formatting, use whatever our trunk formatter wants (#4186) without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * fix the build - would loop forever if there were no files to send (#4188) * Show owner.short_name on boot (and E-Ink sleep screen) (#4134) * Show owner.short_name on boot and sleep screen (on e-ink) * Update Screen.cpp - new line for short_name Boot screen short_name now below the region setting. Looks better on small screens. * Draw short_name on right --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * nrf52 soft device will watchdog if you use ICE while BT on... (#4189) so have debugger disable bluetooth. * correct xiao_ble build preventing sx1262 init (#4191) * Force a compile time failur if FromRadio or ToRadio get larger than (#4190) a BLE packet size. We are actually very close to this threshold so important to make sure we don't accidentally pass it. * Clear vector after complete config state (#4194) * Clear after complete config * Don't collect . entries * Log file name and size * [create-pull-request] automated change (#4200) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Make the logs Colorful! (#4199) * Squash needlessly static functions (#4183) * Trim extra vprintf and filter for unprintable characters * Deprecate Router Client role (and make it Client) (#4201) * [create-pull-request] automated change (#4205) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Move waypoint (#4202) * Move waypoint screen draw into the waypoint module * Get the observer set up for the waypoint screen draw * Static squashing: screen dimensions Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class. * Move getCompassDiam into Screen class (supress compiler warnings) At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance. This is probably just another band-aid until these static functions all move. * Use new getCompassDiam function in AccelerometerThread * Properly gate display code in WaypointModule --------- Co-authored-by: Todd Herbert <herbert.todd@gmail.com> * Fix flakey phone api transition from file manifest to complete (#4209) * Try fix flakey phone api transition from file manifest to complete * Skip * enable colors in platformio serial monitor (#4217) * When talking via serial, encapsulate log messages in protobufs if necessary (#4187) * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4218) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix SHT41 support (#4222) * Add SHT41 Serial to I2c Detection Code On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being incorrectly detected as SHT31. This patch adds the necessary serial number for the SHT41 chip to be correctly detected. fixes meshtastic/firmware#4221 * Add missing sensor read for SHT41 * Typo fix in logs - mhz - MHz (#4225) As reported by karamo, a few different places in our logs had incorrect capitalization of MHz. fixes meshtastic/firmware#4126 * New new BLE logging characteristic with LogRecord protos (#4220) * New UUID * New log radio characteristic with LogRecord protobuf * LogRecord * Merge derp * How did you get there * Trunk * Fix length * Remove assert * minor cleanup proposal (#4169) * MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup... Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside configuration.h * cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET We already had HAS_NETWORKING as flag in MQTT to mean 'we have tcpip'. Generallize that and move it into configuration.h so that we can use it elsewhere. * Use #pragma once, because supported by gcc and all modern compilers instead of #ifdef DOTHFILE_H etc... --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add PowerMon support (#4155) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 ) * oops - mean't to mark the _dbg variant as an 'extra' board. * powermon wip * Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB * Instrument (radiolib only for now) lora for powermon per https://github.com/meshtastic/firmware/issues/4136 * powermon gps support https://github.com/meshtastic/firmware/issues/4136 * Add CPU deep and light sleep powermon states https://github.com/meshtastic/firmware/issues/4136 * Change the board/swversion bootstring so it is a new "structured" log msg. * powermon wip * add example script for getting esp S3 debugging working Not yet used but I didn't want these nasty tricks to get lost yet. * Add PowerMon reporting for screen and bluetooth pwr. * make power.powermon_enables config setting work. * update to latest protobufs * fix bogus shellcheck warning * make powermon optional (but default enabled because tiny and no runtime impact) * tell vscode, if formatting, use whatever our trunk formatter wants without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * add PowerStress module * nrf52 arduino is built upon freertos, so let platformio debug it * don't accidentally try to Segger ICE if we are using another ICE * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs * update to latest protobufs (needed for powermon goo) * PowerStress WIP * fix linter warning * Cleanup buffer * Merge hex for wm1110 target(s) * Only sdk * Sudo * Fix exclude macros (#4233) * fix MESHTASTIC_EXCLUDE_BLUETOOTH * fix HAS_SCREEN=0 * fix MESHTASTIC_EXCLUDE_GPS * fix typo in build-nrf52.sh (#4231) chmod is the command, '+x' is the argument. * Tidy Wireless Paper variant files (#4238) * Quick tidy of pins_arduino.h Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480) * Tidy variant.h * Change deprecated ADC attenuation parameter From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12` * Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243) * Fix BLE logging on nrf52 (#4244) * allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types This allows 'lossless' log reading. If client has requested INDICATE (rather than NOTIFY) each log record emitted via log() will have to fetched by the client device before the meshtastic node can continue. * Fix serious problem with nrf52 BLE logging. When doing notifies of LogRecords it is important to use the binary write routines - writing using the 'string' write won't work. Because protobufs can contain \0 nuls inside of them which if being parsed as a string will cause only a portion of the protobuf to be sent. I noticed this because some log messages were not getting through. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Fix build when HAS_NETWORKING is false on nrf52 (#4237) (tested on a rak4631 by setting HAS_ETHERNET false when shrinking image) * If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246) * Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248) * Update variant.h * Update wio-tracker-wm1110.json * Update wio-sdk-wm1110.json * Update platformio.ini * Update platformio.ini * Add files via upload * Add files via upload * Update variant.h * Cleanup NRF s140 Softdevice variants (#4252) Note: This idea is originally from @caveman99 and should be credited as such. Submitting as a separate PR so the work in meshtastic/firmware#4148 can be a bit cleaner and Seeed boards can build while that work is ongoing. The nrf52 boards that depend on the v7 softdevice all use the same code and linker files. Rather than duplicate the code, keep it all together with the platform. * Remove tracker variant specific soft device headers (#4255) * [create-pull-request] automated change (#4247) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add wio-sdk-wm1110 to build. (#4258) The wio-sdk-wm1110 is distinct from the wio-tracker-wm1110, with different platformio build options and pin config. This change adds the wio-sdk-wm1110 to the CI matrix so firmware is built as part of release. * fix python warning in uf2conf (#4235) the old regex worked but was technically incorrect. fixes: Generating NRF52 uf2 file /home/kevinh/development/meshtastic/firmware/bin/uf2conv.py:195: SyntaxWarning: invalid escape sequence '\s' words = re.split('\s+', line) Converting to uf2, output size: 1458688, start address: 0x26000 * Collect hex files and specifically wm1110 sdk * Skip dfu file for sdk (for now) * Helps if you remove the original clause * Add Heltec new boards. (#4226) * Add Heltec new boards * Update variant.h disable RTC by default * Add Heltec New boards * Add Heltec new boards * Update Heltec Mesh Node definition. * Update Heltec Vision Mater E290 * [create-pull-request] automated change (#4259) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Trunk fmt * Fix macros * Move e290 to board level extra while CI is broken * Tell trunk to ignore bin folder * Fix missing * Update trunk.yaml, fix whitespace * Update trunk.yaml * Update build_raspbian_armv7l.yml --fix-missing * [create-pull-request] automated change (#4263) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * GPS Power State tidy-up (#4161) * Refactor GPSPowerState enum Identifies a case where the GPS hardware is awake, but an update is not yet desired * Change terminology * Clear old lock-time prediction on triple press * Use exponential smoothing to predict lock time * Rename averageLockTime to predictedLockTime * Attempt: Send PMREQ with duration 0 on MCU deep-sleep * Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep * Revert "Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep" This reverts commit 8b697cd2a4. * Revert "Attempt: Send PMREQ with duration 0 on MCU deep-sleep" This reverts commit 9d29ec7603. * Remove unused notifyGPSSleep Observable Handled with notifyDeepSleep, and enable() / disable() * WIP: simplify GPS power management An initial attempt only. * Honor #3e9e0fd * No-op when moving between GPS_IDLE and GPS_ACTIVE * Ensure U-blox GPS is awake to receive indefinite sleep command * Longer pause when waking U-blox to send sleep command * Actually implement soft and hard sleep.. * Dynamically estimate the threshold for GPS_HARDSLEEP * Fallback to GPS_HARDSLEEP, if GPS_SOFTSLEEP unsupported * Move "excessive search time" behavior to scheduler class * Minor logging adjustments * Promote log to warning * Gratuitous buffer clearing on boot * Fix inverted standby pin logic Specifically the standby pin for L76B, L76K and clones Discovered during T-Echo testing: totally broken function, probe method failing. * Remove redundant pin init Now handled by setPowerState * Replace max() with if statements Avoid those platform specific implementations.. * Trunk formatting New round of settings.json changes keep catching me out, have to remember to re-enable my "clang-format" for windows workaround. * Remove some asserts from setPowerState Original aim was to prevent sending a 0 second PMREQ to U-blox hardware as part of a timed sleep (GPS_HARDSLEEP, GPS_SOFTSLEEP). I'm not sure this is super important, and it feels tidier to just allow the 0 second sleeptime here, rather than fudge the sleeptime further up. * Fix an error determining whether GPS_SOFTSLEEP is supported * Clarify a log entry * Set PIN_STANDBY for MCU deep-sleep Required to reach TTGO's advertised 0.25mA sleep current for T-Echo. Without this change: ~6mA. * Optimize the shutdown current of RAK10701 to around 25uA (#4260) Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * INA3221 sensor: use for bus voltage & environment metrics (#4215) * use INA3221 for bus voltage; fixes for telemetry variants - add to sensors available for environment telemetry (to report voltage/current) - add vars to define channels to use for battery voltage (for getBusVoltage) and environment metrics (default to CH1 for both) - write to the correct fields on the measurement struct depending on the measurement variant, and DRY up the sensor measurement collection code a bit - this might be suitable for a common implementation for the INA* sensors in a future PR... * formatting * derp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * WM1110 SDK kit enter serial DFU and add deployment packages (#4266) * Switch default upload protocol to nrfutil so that pio generates zip deploy packages * Enter serial DFU on SDK board * Remove guard for DFU zip from SDK build * NRF_USE_SERIAL_DFU macro instead * Show specific frame when updating screen (#4264) * Updated setFrames in Screen.cpp Added code to attempt to revert back to the same frame that user was on prior to setFrame reload. * Space added Screen.cpp * Update Screen.cpp Make screen to revert to Frame 0 if the originally displayed frame is no longer there. * Update Screen.cpp Inserted boolean holdPosition into setFrames to indicate the requirement to stay on the same frame ( if =true) or else it will switch to new frame . Only Screen::handleStatusUpdate calls with setFrame(true). ( For Node Updates) All other types of updates call as before setFrame(), so it will change focus as needed. * Hold position, even if number of frames increases * Hold position, if handling an outgoing text message * Update Screen.cpp * Reverted chnages related to devicestate.has_rx_text_message * Reset to master * CannedMessages only handles routing packets when waiting for ACK Previously, this was calling Screen::setFrames at unexpected times * Gather position info about screen frames while regenerating * Make admin module observable Notify only when relevant. Currently: only to handle remove_nodenum. * Optionally specify which frame to focus when setFrames runs * UIFrameEvent uses enum instead of multiple booleans * Allow modules to request their own frame to be focussed This is done internally by calling MeshModule::requestFocus() Easier this way, insteady of passing the info in the UIFrameEvent: * Modules don't always know whether they should be focussed until after the UIFrameEvent has been raised, in dramFrame * Don't have to pass reference to module instance as parameter though several methods * E-Ink screensaver uses FOCUS_PRESERVE Previously, it had its own basic implementation of this. * Spelling: regional variant * trunk * Fix HAS_SCREEN guarding * More HAS_SCREEN guarding --------- Co-authored-by: BIST <77391720+slash-bit@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: slash-bit <v-b2@live.com> * Move up telemetry defaults to every 30 minutes (#4274) * Don't send node info interrogation when ch. util is >25% (#4273) * Moar LR1110 Targets * update SD_FLASH_SIZE to 0x27000 (#4232) The 7.3.0 softdevice needs the extra 1000 :) * Fix spacing. --------- Co-authored-by: Mike <mikhael.skvortsov@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Mike G <mkgin@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Warren Guy <5602790+warrenguy@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: geeksville <kevinh@geeksville.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Alexander <156134901+Dorn8010@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: quimnut <github@dopegoat.com> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Agent Blu, 006 <blu006@ucr.edu> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Aaron.Lee <32860565+Heltec-Aaron-Lee@users.noreply.github.com> Co-authored-by: Daniel.Cao <144674500+DanielCao0@users.noreply.github.com> Co-authored-by: BIST <77391720+slash-bit@users.noreply.github.com> Co-authored-by: slash-bit <v-b2@live.com>	2024-07-13 20:38:19 -05:00
Ben Meadors	c5d747cd3e	Scale default intervals based for *online* mesh size past 40 nodes (#4277) ... * Add congestion scaling coefficient * Added active mesh sized based interval scaling * Moved back to bottom * Format * Add observers and use correct number of online nodes	2024-07-13 05:59:19 -05:00
Ben Meadors	699d37b04c	Move up telemetry defaults to every 30 minutes (#4274)	2024-07-12 09:24:42 -05:00
Warren Guy	974fc31856	INA3221 sensor: use for bus voltage & environment metrics (#4215) ... * use INA3221 for bus voltage; fixes for telemetry variants - add to sensors available for environment telemetry (to report voltage/current) - add vars to define channels to use for battery voltage (for getBusVoltage) and environment metrics (default to CH1 for both) - write to the correct fields on the measurement struct depending on the measurement variant, and DRY up the sensor measurement collection code a bit - this might be suitable for a common implementation for the INA* sensors in a future PR... * formatting * derp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-07-11 08:34:55 -05:00
Tom Fifield	d97e6b86b8	Sync Wio lr1110 refresh with master (#4251) ... * Fix protobuf structs handling (#4140) * Fix protobuf structs handling * Log instead of assert --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * BLE based logging (#4146) * WIP log characteristic * Bluetooth logging plumbing * Characteristic * Callback * Check for nullptr * Esp32 bluetooth impl * Formatting * Add thread name and log level * Add settings guard * Remove comments * Field name * Fixes esp32 * Open it up * Whoops * Move va_end past our logic * Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151) * Standardize lat/lon position logs (#4156) * Standardize lat/lon position logs * Missed sone and condensed logs * [create-pull-request] automated change (#4157) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Pause BLE logging during want_config flow (#4162) * Update NimBLE to 1.4.2 (#4163) * Implement replies for all telemetry types based on variant tag (#4164) * Implement replies for all telemetry types based on variant tag * Remove check for `ignoreRequest`: modules can set this, don't need to check --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Esptool is better * Explicitly set characteristic * fix INA3221 sensor (#4168) - pass wire to begin() - remove redundant setAddr() (already set in header) * Show compass on waypoint frame; clear when waypoint deleted (#4116) * Clear expired or deleted waypoint frame * Return 0 to CallbackObserver * Add a missing comment * Draw compass for waypoint frame * Display our own waypoints * [create-pull-request] automated change (#4171) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add semihosting support for nrf52 devices (#4137) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * fix my botched merge - keep board_level = extra flag for rak3631_dbg --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4174) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Display alerts (#4170) * Move static functions into Screen.h, show compass during calibration * Move to _fontHeight macro to avoid collision * Move some alert functions to new alert handler * Catch missed reboot code * ESP32 fixes * Bump esp8266-oled-ssd1306 * Fixes for when a device has no screen * Use new startAlert(char*) helper class * Add EINK bits back to alert handling * Add noop class for no-display devices --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Send file system manifest up on want_config (#4176) * Send file system manifest up on want_config * Platform specific methods * Helps to actually make the change * Clear * tell vscode, if formatting, use whatever our trunk formatter wants (#4186) without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * fix the build - would loop forever if there were no files to send (#4188) * Show owner.short_name on boot (and E-Ink sleep screen) (#4134) * Show owner.short_name on boot and sleep screen (on e-ink) * Update Screen.cpp - new line for short_name Boot screen short_name now below the region setting. Looks better on small screens. * Draw short_name on right --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * nrf52 soft device will watchdog if you use ICE while BT on... (#4189) so have debugger disable bluetooth. * correct xiao_ble build preventing sx1262 init (#4191) * Force a compile time failur if FromRadio or ToRadio get larger than (#4190) a BLE packet size. We are actually very close to this threshold so important to make sure we don't accidentally pass it. * Clear vector after complete config state (#4194) * Clear after complete config * Don't collect . entries * Log file name and size * [create-pull-request] automated change (#4200) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Make the logs Colorful! (#4199) * Squash needlessly static functions (#4183) * Trim extra vprintf and filter for unprintable characters * Deprecate Router Client role (and make it Client) (#4201) * [create-pull-request] automated change (#4205) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Move waypoint (#4202) * Move waypoint screen draw into the waypoint module * Get the observer set up for the waypoint screen draw * Static squashing: screen dimensions Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class. * Move getCompassDiam into Screen class (supress compiler warnings) At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance. This is probably just another band-aid until these static functions all move. * Use new getCompassDiam function in AccelerometerThread * Properly gate display code in WaypointModule --------- Co-authored-by: Todd Herbert <herbert.todd@gmail.com> * Fix flakey phone api transition from file manifest to complete (#4209) * Try fix flakey phone api transition from file manifest to complete * Skip * enable colors in platformio serial monitor (#4217) * When talking via serial, encapsulate log messages in protobufs if necessary (#4187) * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4218) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix SHT41 support (#4222) * Add SHT41 Serial to I2c Detection Code On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being incorrectly detected as SHT31. This patch adds the necessary serial number for the SHT41 chip to be correctly detected. fixes meshtastic/firmware#4221 * Add missing sensor read for SHT41 * Typo fix in logs - mhz - MHz (#4225) As reported by karamo, a few different places in our logs had incorrect capitalization of MHz. fixes meshtastic/firmware#4126 * New new BLE logging characteristic with LogRecord protos (#4220) * New UUID * New log radio characteristic with LogRecord protobuf * LogRecord * Merge derp * How did you get there * Trunk * Fix length * Remove assert * minor cleanup proposal (#4169) * MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup... Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside configuration.h * cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET We already had HAS_NETWORKING as flag in MQTT to mean 'we have tcpip'. Generallize that and move it into configuration.h so that we can use it elsewhere. * Use #pragma once, because supported by gcc and all modern compilers instead of #ifdef DOTHFILE_H etc... --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add PowerMon support (#4155) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 ) * oops - mean't to mark the _dbg variant as an 'extra' board. * powermon wip * Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB * Instrument (radiolib only for now) lora for powermon per https://github.com/meshtastic/firmware/issues/4136 * powermon gps support https://github.com/meshtastic/firmware/issues/4136 * Add CPU deep and light sleep powermon states https://github.com/meshtastic/firmware/issues/4136 * Change the board/swversion bootstring so it is a new "structured" log msg. * powermon wip * add example script for getting esp S3 debugging working Not yet used but I didn't want these nasty tricks to get lost yet. * Add PowerMon reporting for screen and bluetooth pwr. * make power.powermon_enables config setting work. * update to latest protobufs * fix bogus shellcheck warning * make powermon optional (but default enabled because tiny and no runtime impact) * tell vscode, if formatting, use whatever our trunk formatter wants without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * add PowerStress module * nrf52 arduino is built upon freertos, so let platformio debug it * don't accidentally try to Segger ICE if we are using another ICE * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs * update to latest protobufs (needed for powermon goo) * PowerStress WIP * fix linter warning * Cleanup buffer * Merge hex for wm1110 target(s) * Only sdk * Sudo * Fix exclude macros (#4233) * fix MESHTASTIC_EXCLUDE_BLUETOOTH * fix HAS_SCREEN=0 * fix MESHTASTIC_EXCLUDE_GPS * fix typo in build-nrf52.sh (#4231) chmod is the command, '+x' is the argument. * Tidy Wireless Paper variant files (#4238) * Quick tidy of pins_arduino.h Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480) * Tidy variant.h * Change deprecated ADC attenuation parameter From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12` * Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243) * Fix BLE logging on nrf52 (#4244) * allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types This allows 'lossless' log reading. If client has requested INDICATE (rather than NOTIFY) each log record emitted via log() will have to fetched by the client device before the meshtastic node can continue. * Fix serious problem with nrf52 BLE logging. When doing notifies of LogRecords it is important to use the binary write routines - writing using the 'string' write won't work. Because protobufs can contain \0 nuls inside of them which if being parsed as a string will cause only a portion of the protobuf to be sent. I noticed this because some log messages were not getting through. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Fix build when HAS_NETWORKING is false on nrf52 (#4237) (tested on a rak4631 by setting HAS_ETHERNET false when shrinking image) * If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246) * Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248) * Update variant.h * Update wio-tracker-wm1110.json * Update wio-sdk-wm1110.json * Update platformio.ini * Update platformio.ini * Add files via upload * Add files via upload * Update variant.h --------- Co-authored-by: Mike <mikhael.skvortsov@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Mike G <mkgin@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Warren Guy <5602790+warrenguy@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: geeksville <kevinh@geeksville.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Alexander <156134901+Dorn8010@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: quimnut <github@dopegoat.com> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Agent Blu, 006 <blu006@ucr.edu> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>	2024-07-08 06:03:23 -05:00
Tom Fifield	e65c309af6	Fix SHT41 support (#4222) ... * Add SHT41 Serial to I2c Detection Code On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being incorrectly detected as SHT31. This patch adds the necessary serial number for the SHT41 chip to be correctly detected. fixes meshtastic/firmware#4221 * Add missing sensor read for SHT41	2024-07-02 07:03:51 -05:00
Jonathan Bennett	0425551341	Display alerts (#4170) ... * Move static functions into Screen.h, show compass during calibration * Move to _fontHeight macro to avoid collision * Move some alert functions to new alert handler * Catch missed reboot code * ESP32 fixes * Bump esp8266-oled-ssd1306 * Fixes for when a device has no screen * Use new startAlert(char*) helper class * Add EINK bits back to alert handling * Add noop class for no-display devices --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-06-25 11:26:02 -05:00
GUVWAF	8078e03f5f	Implement replies for all telemetry types based on variant tag (#4164) ... * Implement replies for all telemetry types based on variant tag * Remove check for `ignoreRequest`: modules can set this, don't need to check --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-06-23 07:13:59 -05:00