* Space out periodic broadcasts of modules automatically
* Add warning for function usage
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* * Update RAK9154 sensor to tx remote power telemetry
* remove uf2 script, pio run does that inline
* move sensor module to correct position
* disable LED and Accelerometer code on rak2560
* trunk fmt
* mention epaper variant
* attention, revert, revert
* Enable Environment Telemetry of these values
* fix float values
* fix detection of lark weather station
* fix unit tests and add support for Dfrobot rain gauge
* fix name display on bootup
* fix gauge init logic
* trunk fmt
* add more locking for shared SPI devices (#5595)
* add more locking for shared SPI devices
* call initSPI before the lock is used
* remove old one
* don't double lock
* Add missing unlock
* More missing unlocks
* Add locks to SafeFile, remove from `readcb`, introduce some LockGuards
* fix lock in setupSDCard()
* pull radiolib trunk with SPI-CS fixes
* change ContentHandler to Constructor type locks, where applicable
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* mesh-tab: lower I2C touch frequency
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* update indicator board
* Fixed the issue that indicator device uploads via rp2040 serial port in some cases.
* esp debug logs
* USB mode=1 messed up the debug log
* dummy for config transfer (#5154)
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: virgil <virgil.wang.cj@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Selection of minor edits from the TFT branch that are too
challenging to cherry-pick cleanly, including:
* introducing the HAS_TFT flag
* fixing pins in unphone
* Adding pinterdevice to portduino settings
* INA219 charging detection
minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging
* Update Power.cpp
added comments and 2 extra defines to disable and swap detection direction
* Update Power.cpp
fix disabled case
* move getCurrentMa() to new CurrentSensor class
* INA219 charging detection
minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging
* Update Power.cpp
added comments and 2 extra defines to disable and swap detection direction
* Update Power.cpp
fix disabled case
* move getCurrentMa() to new CurrentSensor class
* add INA3221 charging detection
* RP2040: Update core; add mDNS support (#5355)
* Update arduino-pico core
* RP2040: Add mDNS support
* SimpleMDNS `begin` now returns a bool
* Add `-g` option to `debug_build_flags` to link files for gdb
* RAK11310 needs old platform as well
* Change defines to specific architecture
* Core version 4.2.1 is out
* Add sudo to apt-get commands for Raspbian Build (#5364)
Without sudo, inadequate permissions to runs the commands meant
the build was failing.
* Typo fix in build_raspbian.yml (#5365)
s/sudp/sudo :(:(:(
* Rework some things
* Trunk
* Separate littlefs bundle
* version tags
* Diag
* Add littlefswebui
* Bug fixed in ExternalNotificationModule (#5375)
While `nagging` setExternalState wasn't written to Buzzer & Vibra so output was never toggled.
Possible fix for #5348
* Cleanup static files from bad Web UI bundle on 2.5.13 release (#5376)
* Cleanup static files from bad Web UI bundle on 2.5.13 release
* Check existence first
* Esp32 is the only one we care about
* Move some actions to after `startTransmit()` (#5383)
To minimize the time between channel scan and actual transmit
* [create-pull-request] automated change (#5380)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Allows all 3 PKI keys to be added to userPrefs.h (#4969) and a tool. (#5368)
* more userPrefs.h
Added PKI Admin keys to userPrefs.h
* Update userPrefs.h
Allows all 3 PKI keys to be added to userPrefs.h (#4969)
* Update NodeDB.cpp
Trunk
* Update userPrefs.h
Changed wording
* Create base64_to_hex.py
A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand.
* more userPrefs.h
Added PKI Admin keys to userPrefs.h
* Update userPrefs.h
Allows all 3 PKI keys to be added to userPrefs.h (#4969)
* Update NodeDB.cpp
Trunk
* Update userPrefs.h
Changed wording
* Create base64_to_hex.py
A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand.
* [create-pull-request] automated change (#5388)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* add smiley emoji (#5391)
* add smiley emoji
* clang-formatted
* Anable trace route function on wismeshtap platform (#5389)
* fix 'symbal' typo (#5395)
* [create-pull-request] automated change (#5399)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* /api/v1/fromradio: add OPTIONS handler for CORS. (#5386)
This avoids hitting the 404 Not Found handler, which breaks connection
keep-alive, so this change fixes a big performance regression for Web Client in
Chrome: https://github.com/meshtastic/firmware/issues/5385
Tested on Heltec V3.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Make heart emoji usable (#5403)
* Create a specific hw_model for WisMesh Tap (#5400)
* Create a specific hw_model for WisMesh Tap
* Trunk
* HAS_ETHERNET
* Remove it altogether
* Don't need these either
* Fix RTC time injection and consolidate position logic (#5396)
* Fix RTC time injection and consolidate position logic
* Comment out unused var warning
* Backerds
* Update arduino-pico core to fix sporadic hangs (#5406)
* Update platform-raspberrypi also (#5407)
* Update arduino-pico core to fix sporadic hangs
* Update platform-raspberrypi also
* --web added to device-install(.sh/.bat) (#5405)
* Add --web
* Update device-install.bat
Forgot a "-" a few places.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add GPS in indicator board (#5411)
* Fixed NMEA sentence issue in CalTopo as well as bug with no printing all of the nodes (#5412)
* --web littlefswebui-* typo fix (#5416)
* Add --web
* Update device-install.bat
Forgot a "-" a few places.
* Typo fix.
* Typo fix
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
* Temporarily disable MDNS when MQTT is enabled (#5418)
Leads to a panic
* Check for OkToMqtt flag presence before uplinking to MQTT (#5413)
* Check for oktomqtt flag presence before uplinking to MQTT
* Move to mqtt->onSend
* Temetry can respond to want-response for LocalStats variant (#5414)
* Seems like the last DIY board that's not "extra" (#5420)
* Cherry pick tdeck fixes (#5422)
* Try-fix (workaround) T-Deck audio crash
* set T-Deck audio to unused 48 (mem mclk)
* swap mclk to gpio 21
* dreamcatcher: assign GPIO44 to audio mclk
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
* add canned message and keyboard in indicator board (#5410)
* add canned message and keyboard in indicator board
* Added virtual keyboard macro and enabled for Indicator
* Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update build-native.sh (#5415)
* Update build-native.sh
Device-install.sh and device-update.sh are not used on native platform, skip copying to release directory after build and copy native-install.sh and native-run.sh instead.
* Update build-native.sh
Skip native-run.sh copy
* Cleans up visibility in GPS.h (#5426)
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
* Fix admin key loading from userPrefs.h (#5417)
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28
* Merge PR #420
* Fixed double and missing Default class.
* Use correct format specifier and fixed typo.
* Removed duplicate code.
* Fix error: #if with no expression
* Fix warning: extra tokens at end of #endif directive.
* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.
* Fix deprecated macros.
* Set RP2040 in dormant mode when deep sleep is triggered.
* Fix array out of bounds read.
* Admin key count needs to be set otherwise the key will be zero loaded after reset.
* Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible.
* Remove log spam when reading INA voltage sensor.
* Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots.
* Removed newlines from log.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* try to detect dfrobot station to tell it apart from an ublox gps. (#5393)
* Remove BMA-423 and STK8X by default (#5429)
* Remove BMA-423 by default
* STK
* Wrong macro
* Helps if you include the file
* [create-pull-request] automated change (#5431)
Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>
* Support for the ClimateGuard RadSens Geiger-Muller tube (#5425)
* fixes https://github.com/meshtastic/firmware/issues/5434 (#5435)
* update libpax
* fix interval init
* Fix memory leaks by adding missing `free()` calls before early returns in `MQTT::onReceive` (#5439)
This fix addresses memory leaks in the `MQTT::onReceive` function by ensuring that dynamically allocated resources (`e.channel_id`, `e.gateway_id` and `e.packet`) are properly freed before each early return. Previously, these resources were only freed at the end of the function, leaving them unhandled in certain exit paths. Adding the missing `free()` calls prevents memory leaks and ensures proper resource cleanup in all scenarios.
* Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (#5436)
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* A second round of cleanup on GPS.h. (#5433)
* Move yet more stuff out of GPS.h and into file scope.
* Protect code macros from eating semicolons.
* Remove unused (and unimplemented) getDOPString.
* clang-format with project style file on affected files.
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
* enable MQTT with TLS on RPi picow (#5442)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Don't powersave on Wifi (#5443)
* Don't go into light sleep with wifi enabled
* Move
* Trunk
* Revert "Seems like the last DIY board that's not "extra" (#5420)" (#5446)
This reverts commit e6fb6b115a.
* Actually gunzip all the files when building a .deb (#5449)
* [create-pull-request] automated change (#5457)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Cleanup i2c scan logs and macro to save some bytes and remain consistent (#5455)
* Cleanup i2c scan logs and macro to save some bytes and remain consistent
* Functions are better than macros
* Exclude i2c scan for STM32
* Useless log
* Clean up some inline functions (#5454)
* Use isWithinTimespanMs to avoid refererence to NodeDb instance inside of NodeDb (#5453)
* fix cors for meshtasticd to allow use of cross origin clients (#5463)
* Remove ATECC crypto chip placeholder code (#5461)
* GPS.h cleanups round 3. (#5447)
* GPS.h cleanups round 3.
No effective behavior change.
Protected members can be private so make it so. (Supporting
subclasses needs a lot more work.)
Moves uBloxGnssModelInfo into file scope.
Moves uBloxProtocolVersion into uBloxGnssModelInfo.
Moves baud rate arrays into file scope.
Removes unused/ unimplemented powerStateToString.
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
* Trunk Format.
---------
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Fix ukrainian fonts (#5468)
* FIX: rollback to !4624
* UPDATE: new 16 and 24 UA Fonts and fixes
* fix: Solve the lightsleep crash problem via disable lightsleep for indicator. (#5470)
* Trunk
* Warnings and log cleanup (#5472)
* Don't log if keyboard not found
* Signed comparison issue
* [create-pull-request] automated change (#5475)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Adds libusb dev package to Raspbian build steps (#5480)
* [create-pull-request] automated change (#5478)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Portduino fixes (#5479)
* Set config.yaml defaults even if General is missing
* Unsigned values should get %u in logging
* Update arduino-pico core and remove MDNS restriction (#5483)
* Update xiao_esp32 fully support L67K (#5488)
L67K module hardware changed
* Convert userprefs to a json file instead of header file which has to be included everywhere (#5471)
* WIP
* Got string quoting and macro expansion working
* Need the placeholder
* Cleanup
* Missed a user prefs reference
* Update jsonc
* SimRadio: clean-up and emulate collisions (#5487)
* Clean up SimRadio and don't let it use PKC
* Add collision emulation for SimRadio
* Add stats from SimRadio to LocalStats
* Make emulating collisions optional
* add nodeId to nodeinfo update log lines and removed redundant nodeinfo update log line (#5493)
* Refact the macro definition of GPS initialization of GPSDEFAULTD_NOT_PRESENT and added seeeed Indicator to this sequence (#5494)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Extend Length of Source and Destination Node IDs Logged (#5492)
* show 8 chars for logging source and destination ids
* extend legnth of source and destination nodes in log
* Added femtofox configs (#5477)
* added femtofox configs
* Rename bin/config.d/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml to bin/config.d/femtofox/femtofox_Waveshare-SX126X-XXXM_AI-Thinker-RA-01SH.yaml
* moved femtofox configs to subdir
* [Add] LR1110, LR1120 and LR1121 to linux native Portduino (#5496)
* Update main.cpp
* Update PortduinoGlue.h
* Update PortduinoGlue.cpp
* Update PortduinoGlue.cpp
* Update PortduinoGlue.cpp
* Update main.cpp
* [create-pull-request] automated change (#5500)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Fix minor typos in package workflows (#5505)
* Don't use channel index for encrypted packet (#5509)
* Don't use channel index for encrypted packet
* Remove assert in `getKey`, set invalid key length
So encrypting will fail without reboot
* Reset channel to 0 when unable to encrypt
Such that the NAK doesn't use the failing channel hash
* Always Announce MDNS meshtastic service (#5503)
* refactor server api port into define
* always announce MDNS meshtastic service
* fix nodeDB erase loop when free mem returns invalid value (0, -1). (#5519)
Co-authored-by: mverch67 <manuel.verch@gmx.de>
* Add heltec capsule back
* Revert "Add heltec capsule back"
This reverts commit fc16d93421.
* Lets try this again minus device ui
* Add popular nrf52 pro micro to the builds (#5523)
* Add MACAddress to config.yaml (#5506)
* Add MACAddress to config.yaml
* Better error handling on native, including failing to launch with blank MAC Address and real hardware.
* Re-arrange Mac Address handling and add MACAddressSource
* Bump portduino to remove macaddr function there
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Configure Seeed Xiao S3 RX enable pin (#5517)
* Create OpenWRT_One_mikroBUS_sx1262.yaml (#5529)
* tlora_v2_1_16: Unset BUTTON_PIN and BUTTON_NEED_PULLUP (#5535)
Unset BUTTON_PIN and BUTTON_NEED_PULLUP as the board ships without a user button.
Devices and users expecting a button on GPIO12 have to set [GPIO for user button](https://meshtastic.org/docs/configuration/radio/device/#gpio-for-user-button) to 12 (or any GPIO pin the momentary switch was connected to) to restore functionality.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* [create-pull-request] automated change (#5530)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Fix detection for some RadSens hardware versions (#5542)
Co-authored-by: Jake-B <jake-b@users.noreply.github.com>
* Initialize dmac array to nulls (#5538)
* Initialize dmac array to nulls
* Use std::cout for print before console is init.
* Update OpenWRT_One_mikroBUS_sx1262.yaml (#5544)
* Add portduino-buildroot variant (#5540)
* Add portduino-buildroot variant
* Update platform-native for platform-buildroot
* portduino-buildroot: Define c standard (#5547)
* Portduino: Move meshtasticd/web out of /usr/share/doc/ (#5548)
* Portduino: fix transitional symlinks (#5550)
* Windows Support - Trunk and Platformio (#5397) (#5518)
* Add support for GPG
* Add usb device support
* Add trunk.io to devcontainer
* Trunk things
* trunk fmt
* formatting
* fix trivy/DS002, checkov/CKV_DOCKER_3
* hide docker extension popup
* fix trivy/DS026, checkov/CKV_DOCKER_2
Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com>
* Synch minor changes from TFT branch (#5520)
* Synch minor changes from TFT branch
Includes:
* New nordicnrf52 minor version (10.5.0 --> 10.6.0)
* Optimisations for T_DECK
* preparation for MESH_TAB
* add ext notification module to portduino
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
* DIO3_TCXO_VOLTAGE in config.yaml can now take an exact voltage (#5558)
* Support TLORA_V3.0 (#5563)
- Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector.
- 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these!
- update trunk to latest version
* Create OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml (#5564)
* Portduino: fix setting hwId via argument (#5565)
* INA219 charging detection
minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging
* Update Power.cpp
added comments and 2 extra defines to disable and swap detection direction
* Trunk Fixes
* Add INA226 support
---------
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Michael Gjelsø <36234524+gjelsoe@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: jcyrio <50239349+jcyrio@users.noreply.github.com>
Co-authored-by: Daniel.Cao <144674500+DanielCao0@users.noreply.github.com>
Co-authored-by: Catalin Patulea <cronos586@gmail.com>
Co-authored-by: dylanli <dylan3000dylan@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: madeofstown <33820964+madeofstown@users.noreply.github.com>
Co-authored-by: Christopher Hoover <ch@murgatroid.com>
Co-authored-by: Mictronics <github@mictronics.de>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>
Co-authored-by: jake-b <1012393+jake-b@users.noreply.github.com>
Co-authored-by: César de Tassis Filho <CTassisF@users.noreply.github.com>
Co-authored-by: Tomas Dubec <tomas.dubec@gmail.com>
Co-authored-by: Liam Cottle <liam@liamcottle.com>
Co-authored-by: panaceya <panaceya@users.noreply.github.com>
Co-authored-by: virgil <virgil.wang.cj@gmail.com>
Co-authored-by: Robert <r@rbrt.io>
Co-authored-by: noon92 <40807970+noon92@users.noreply.github.com>
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
Co-authored-by: broglep <20624281+broglep@users.noreply.github.com>
Co-authored-by: Matthias Granberry <matthias.granberry@gmail.com>
Co-authored-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Jake-B <jake-b@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com>
As reported by @Fastomat, if a user had enabled "Share Phone
Position" in the app, RangeTest did not use this position and
recorded a 0,0 lat/lon.
This change preferences GPS where avaialble, but otherwise
uses the position stored for the node in NodeDB.
fixes https://github.com/meshtastic/firmware/issues/5620
* Synch minor changes from TFT branch
Includes:
* New nordicnrf52 minor version (10.5.0 --> 10.6.0)
* Optimisations for T_DECK
* preparation for MESH_TAB
* add ext notification module to portduino
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
* Clean up SimRadio and don't let it use PKC
* Add collision emulation for SimRadio
* Add stats from SimRadio to LocalStats
* Make emulating collisions optional
* add canned message and keyboard in indicator board
* Added virtual keyboard macro and enabled for Indicator
* Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add support for is_ignored bool in NodeInfo
* is_ignored is not a boring node either
* Clean out metrics and position
* Clear the key too
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Don't send to public channel
`p->to` wasn't set and had the same value as broadcast, it's now set to our own NodeNum.
* Trunk
* Update DetectionSensorModule.cpp
Take 3
* Revert NodeNum()
* Improve the processing speed of virtual keyboards
* Remove the disable GPS feature, as it would interfere with the normal use of TFT
* Changed the default screen sleep time to 30s
* Rename platform rak10701 -> rak wismeshtap
* Fixed rak wismeshtap turned off gps caused the screen not to display
* Reduce the size of the flash, otherwise uf2 will not work
Co-authored-by: Daniel Cao <daniel.cao@rakwireless.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* uclibc compatibility
Adds compatibility with uclibc, the officially supported toolchain of the luckfox pico
* Explicitly link stdc++fs for std::filesystem
Bringing this over from buildroot-meshtastic
* Don't send ACKs to responses over multiple hops
* Move repeated sending logic to `wasSeenRecently()`
* Add exception for simulator for duplicate packets from PhoneAPI
* Add short debug message
We currently have 4 different places where we have the logic for
modifying LED state of the various types of Ambient LEDs,
ExternalNotificationModule::SetExternalOff
ExternalNotificationModule::SetExternalOn
AmbientLightingThread::setLighting
AmbientLightingThread::setLightingOff
This patch de-duplicates the methods in ExternalNotification to
a single method, using a boolean to toggle whether we're turning
things on or off.
* T1000-E Peripherals
- enable intelligent charge controller signals
- enable Accelerometer
- enable internal I2C bus
- provide Power to Accelerometer
* POC Accelerometer Code (wakeScreen is moot for that device, just test if the driver works)
* fix building without the sensor
* ws85 updates
add temperature
add wantack
add high_priority
set lull to 0 if never set.
add the has_FIELD_NAME lines to ws85
* pbufs sync
* high insteaed of max reliability
* only set want_ack and high reliable if sensor_role set
* protobufs
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add stub health telemetry module
* Add detection for MAX30102 Health Sensor
It lives on I2C bus at 0x57, which conflicts with an existing
sensor. Add code to check the PARTID register for its response 0x15
per spec.
* Add detection for MLX90614
An IR Temperature sensor suitable for livestock monitoring.
* Add libraries for MLX90614 and MAX30102 sensors
* Fix Trunk
* Add support for MLX90614 IR Temperature Sensor
* Add support for MAX30102 (Temperature)
* Make it build - our first HealthTelemetry on the mesh.
If a MAX30102 is connected, its temperature will be sent to the
mesh as HealthTelemetry.
* Add spo2 and heart rate calculations to MAX30102
* Switch MLX90614 to Adafruit library
Sparkfun was having fun with SDA/SCL variables which we can avoid
by switching to this highly similar library.
* Enable HealthTelemetry if MLX90614 detected
* Change MLX90614 emissivity for human skin.
* Add health screen!
* Remove autogenerated file from branch
* Preparing for review
* Fix MeshService master sync from before.
* Prepare for review
* For the americans
* Fix native build
* Fix for devices with no screen
* Remove extra log causing issues
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Toggle Blutooth with Fn+b shortcut
Problem:
As many are aware, ESP32 devices are known for their high power consumption. For instance, the Heltec ESP32 V3 draws around 110mA when powered on with the screen active and connected to a phone via Bluetooth. The Bluetooth radio alone is responsible for approximately 50mA of that consumption. For keyboard-based standalone devices, which rarely need Bluetooth other than for changing settings, users were forced to keep Bluetooth on regardless of necessity. There was no way to toggle Bluetooth on or off without physically connecting the device to a computer via serial or using the admin channel, which required another node for access.
Solution:
I implemented a new feature that allows users to turn off Bluetooth on keyboard devices by pressing Fn+b and turn it back on when needed. This enhancement significantly improves power efficiency for these devices.
Result:
With Bluetooth off, the device now consumes only 55mA. When combined with Power Save mode, the consumption can drop as low as 11mA, a substantial reduction from the previous 110mA. Users can still easily reconnect to a phone using the shortcut when necessary, offering greater flexibility and extended battery life.
* Remove 1 reboot at least.
I was able to prevent a reboot using the disableBluetooth(); command, current tested at 47-55mA, it doesn't require a reboot to turn off, but it does need reboot to turn back on.
* Update CannedMessageModule.cpp
GetTimeSinceMeshPacket was duplicated in PowerTelemetry and
EnvironmentalTelemetry, albeit one had a cooler name than the other.
As we add HealthTelemetry, to avoid creating a third instance of
this method, let's move it somewhere that makese sense.
Adds a new method GetTimeSinceMeshPacket to MeshService and updates
EnvironmentTelemetry and PowerTelemetry to use it.
* When importing config, keep Bluetooth on and defer rebooting until config is committed
* One more place that was prematurely disabling Bluetooth
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
