Commit Graph

898 Commits

Author SHA1 Message Date
Ben Meadors
982190936d
More log reductions. I'll probably stop now ;-) (#5263)
Some checks are pending
CI / setup (rp2040) (push) Waiting to run
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
2024-11-06 21:03:25 +08:00
Ben Meadors
8498b175e7
Add exception for RTC to not strip time from position (#5262)
Some checks are pending
CI / setup (rp2040) (push) Waiting to run
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
* Add exception for RTC to not strip time from position

* t
2024-11-06 10:06:43 +08:00
Ben Meadors
f769c50fa5
More reduction (#5256)
Some checks are pending
CI / setup (rp2040) (push) Waiting to run
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
* Now with even fewer ings

* Ye

* Mo

* QMA6100PSensor
2024-11-04 19:15:59 -06:00
Ben Meadors
50dac38a1b
Pass#2: Lots more savings in logs and string reduction surgery (#5251)
Some checks are pending
CI / setup (rp2040) (push) Waiting to run
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
* Pass#2: Lots more savings in logs and string reduction surgery

* Don't need Thread suffix either

* Warn
2024-11-04 12:16:25 -06:00
Tom Fifield
276067065e
Log cleanups (#5135)
* Log cleanups

change log levels, shorten log messages, delete commented out logs

* Address comments from review

* Remove full stops

* EDEBUG --> DEBUG
2024-11-04 06:09:23 -06:00
Austin
9415254dda
musl compatibility (#5219)
Some checks are pending
CI / setup (rp2040) (push) Waiting to run
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
* musl compat

* trunk fmt

* Update platform-native, including musl fix

https://github.com/meshtastic/platform-native/pull/5

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-11-03 14:24:04 +01:00
GUVWAF
da7424a604
Improve ACK logic for responses and repeated packets (#5232)
* Don't send ACKs to responses over multiple hops

* Move repeated sending logic to `wasSeenRecently()`

* Add exception for simulator for duplicate packets from PhoneAPI

* Add short debug message
2024-11-03 06:21:45 -06:00
Technologyman00
bee474ee54
Spell check all Code (#5228)
Some checks are pending
CI / setup (rp2040) (push) Waiting to run
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
* Spelling Fixes

* More Spelling Errors

* More Spelling Checks

* fixed wording

* Undo mesh\generated changes

* Missed one file on readd

* missed second file
2024-11-03 09:25:05 +08:00
Ben Meadors
a1ac358b0a
Don't try to count non-lora transmissions into airtime (or attempt to decode) (#5215)
* Don't try to count non-lora transmissions into airtime (or attempt to decode)

* Don't need to check utilization anymore
2024-11-01 13:20:11 -05:00
GUVWAF
462a0718cf
Fix SerialModule getting packet from ourselves (#5206) 2024-10-31 11:46:00 -05:00
Andre K
28b469dbf0
fix: don't broadcast public keys if the user is licensed (#5190)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
2024-10-30 12:05:09 -05:00
Tom Fifield
2945b9cfbe
De-duplicate Ambient LED management code (#5156)
We currently have 4 different places where we have the logic for
modifying LED state of the various types of Ambient LEDs,
ExternalNotificationModule::SetExternalOff
ExternalNotificationModule::SetExternalOn
AmbientLightingThread::setLighting
AmbientLightingThread::setLightingOff

This patch de-duplicates the methods in ExternalNotification to
a single method, using a boolean to toggle whether we're turning
things on or off.
2024-10-29 05:41:21 -05:00
Jonathan Bennett
82145e0661
Cherry picks (#5166)
* fix compiler error std::find()

* fix wifi/bt connection status

* try-fix crash

* added 1200baud reset

---------

Co-authored-by: mverch67 <manuel.verch@gmx.de>
2024-10-28 10:21:57 +10:00
Thomas Göttgens
93318b4f56
T1000-E Peripherals (#5141)
* T1000-E Peripherals
- enable intelligent charge controller signals
- enable Accelerometer
- enable internal I2C bus
- provide Power to Accelerometer

* POC Accelerometer Code (wakeScreen is moot for that device, just test if the driver works)
* fix building without the sensor
2024-10-26 12:03:28 +02:00
GUVWAF
09c8642aa6
Fix rebroadcasting encrypted packets when KNOWN_ONLY or LOCAL_ONLY is used (#5109) 2024-10-20 17:04:45 -05:00
Ben Meadors
4575352d8c
Initial NODENUM_BROADCAST_NO_LORA implementation with NeighborInfo module (#5087)
* Initial NODENUM_BROADCAST_NO_LORA implementation with NeighborInfo module

* isBroadcast

* Trunkt
2024-10-19 12:48:00 -05:00
Tavis
696bcc60af
Ws85 updates : set want_ack, high_priority, add temperature. (#5052)
* ws85 updates

add temperature
add wantack
add high_priority

set lull to 0 if never set.

add the has_FIELD_NAME lines to ws85

* pbufs sync

* high insteaed of max reliability

* only set want_ack and high reliable if sensor_role set

* protobufs

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
2024-10-15 05:09:18 -05:00
Thomas Göttgens
05e4a639a1
remove newline from logging statements. (#5022)
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-10-14 15:11:43 +11:00
Ben Meadors
fb9f361052
Implement rebroadcast mode NONE (#5040)
* Implement rebroadcast mode none

* Correct debug message
2024-10-12 06:17:44 -05:00
mverch67
363fd8ab98 fix GPIO0 mode after I2S audio 2024-10-12 10:24:41 +02:00
Ben Meadors
411aedaf5d
Add health telemetry module (#4927)
* Add stub health telemetry module

* Add detection for MAX30102 Health Sensor

It lives on I2C bus at 0x57, which conflicts with an existing
sensor. Add code to check the PARTID register for its response 0x15
per spec.

* Add detection for MLX90614

An IR Temperature sensor suitable for livestock monitoring.

* Add libraries for MLX90614 and MAX30102 sensors

* Fix Trunk

* Add support for MLX90614 IR Temperature Sensor

* Add support for MAX30102 (Temperature)

* Make it build - our first HealthTelemetry on the mesh.

If a MAX30102 is connected, its temperature will be sent to the
mesh as HealthTelemetry.

* Add spo2 and heart rate calculations to MAX30102

* Switch MLX90614 to Adafruit library

Sparkfun was having fun with SDA/SCL variables which we can avoid
by switching to this highly similar library.

* Enable HealthTelemetry if MLX90614 detected

* Change MLX90614 emissivity for human skin.

* Add health screen!

* Remove autogenerated file from branch

* Preparing for review

* Fix MeshService master sync from before.

* Prepare for review

* For the americans

* Fix native build

* Fix for devices with no screen

* Remove extra log causing issues

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
2024-10-07 19:50:44 -05:00
HarukiToreda
1c54388bb8
Toggle Bluetooth with Fn+b shortcut (#4977)
* Toggle Blutooth with Fn+b shortcut

Problem:
As many are aware, ESP32 devices are known for their high power consumption. For instance, the Heltec ESP32 V3 draws around 110mA when powered on with the screen active and connected to a phone via Bluetooth. The Bluetooth radio alone is responsible for approximately 50mA of that consumption. For keyboard-based standalone devices, which rarely need Bluetooth other than for changing settings, users were forced to keep Bluetooth on regardless of necessity. There was no way to toggle Bluetooth on or off without physically connecting the device to a computer via serial or using the admin channel, which required another node for access.

Solution:
I implemented a new feature that allows users to turn off Bluetooth on keyboard devices by pressing Fn+b and turn it back on when needed. This enhancement significantly improves power efficiency for these devices.

Result:
With Bluetooth off, the device now consumes only 55mA. When combined with Power Save mode, the consumption can drop as low as 11mA, a substantial reduction from the previous 110mA. Users can still easily reconnect to a phone using the shortcut when necessary, offering greater flexibility and extended battery life.

* Remove 1 reboot at least.

I was able to prevent a reboot using the disableBluetooth(); command, current tested at 47-55mA, it doesn't require a reboot to turn off, but it does need reboot to turn back on.

* Update CannedMessageModule.cpp
2024-10-07 15:16:10 -05:00
Tom Fifield
bb9f003c24
Switch EnvironmentTelemetry to use UnitConversions (#4972)
We already have a central class for unit conversions, switch
EnvironmentTelemetry to that in preparation for HealthTelemetry.
2024-10-06 07:55:21 -05:00
Tom Fifield
553e572eb5
Coalesce duplicated method GetTimeSinceMeshPacket (#4968)
GetTimeSinceMeshPacket was duplicated in PowerTelemetry and
EnvironmentalTelemetry, albeit one had a cooler name than the other.

As we add HealthTelemetry, to avoid creating a third instance of
this method, let's move it somewhere that makese sense.

Adds a new method GetTimeSinceMeshPacket to MeshService and updates
EnvironmentTelemetry and PowerTelemetry to use it.
2024-10-06 06:40:06 -05:00
GUVWAF
673fe294f3
Add rxDupe, txRelay and txRelayCanceled to LocalStats (#4936)
* Introduce `isFromUs()` and `isToUs()`

* Add rxDupe, txRelay and txRelayCanceled to LocalStats
2024-10-04 06:28:51 -05:00
gitbisector
236374491b
cleanupNeighbors() time difference fix (#4941) 2024-10-04 06:17:23 -05:00
Ben Meadors
00f15459ec
Userprefs prefix macros for clarity and consistency (#4923)
* Convert userprefs macros to prefixed ones for clarity

* Fix key
2024-10-02 06:14:24 -05:00
todd-herbert
b8044c4983
Tweak dimensions for Canned Message Notifications (#4924) 2024-10-02 05:37:08 -05:00
Ben Meadors
18f12584ab
Consolidate and shrink down the re-used strings in logs (#4907)
* Consolidate and shrink down the re-used strings in GPS

* Condense all the things

---------

Co-authored-by: GUVWAF <thijs@havinga.eu>
2024-10-01 15:38:36 -05:00
GUVWAF
3492c9aa99
Construct StoreForwardModule for Portduino as well (#4903)
* Construct StoreForwardModule for Portduino as well

* Remove duplicate variables
2024-09-29 16:17:23 -05:00
Michael Gjelsø
d73cbf14d5
Get accelerometerThread running from AdminModule. (#4886) 2024-09-29 11:49:16 -05:00
dahanc
d41d4c930e
When importing config, keep Bluetooth on and defer rebooting until co… (#4898)
* When importing config, keep Bluetooth on and defer rebooting until config is committed

* One more place that was prematurely disabling Bluetooth

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-09-29 07:30:10 -05:00
Thomas Göttgens
62c306a14b
Merge branch 'master' into esp32-c6 2024-09-28 12:33:50 +02:00
Jonathan Bennett
6e1aa52723 More store-n-forward on native 2024-09-28 11:37:27 +02:00
Jonathan Bennett
5ff265c196 First stab at enabling store and forward for Native 2024-09-28 11:37:27 +02:00
Ken Piper
0e0811eccd
Implement GPIO pin allowlist (#4882) 2024-09-27 19:31:05 -05:00
Thomas Göttgens
cb1cf055b1
Merge branch 'master' into esp32-c6 2024-09-27 22:51:29 +02:00
Ben Meadors
9bebad2dbe Trunkt 2024-09-25 19:54:14 -05:00
Szetya
14019f2afa
Update WaypointModule.cpp (#4870)
In INVERTED display mode, the compass ring was not visible.
2024-09-25 19:09:27 -05:00
Thomas Göttgens
12481b568a
fix a lot of nuisances reported by cppcheck (#4872)
* fix a lot of nuisances reported by cppcheck

* fix portduino
2024-09-25 19:09:06 -05:00
Thomas Göttgens
3072b2a444
Merge branch 'master' into esp32-c6 2024-09-26 00:20:00 +02:00
Ben Meadors
baf9cf5a59
Encapsulate RadioLibInterface receive IRQ logic (#4866)
* Encapsulate RadioLibInterface receive IRQ logic

* More concise

* Trunk
2024-09-25 16:19:18 -05:00
Ben Meadors
3a2fa118a2
Merge branch 'master' into detsensor_broadcast_changes 2024-09-25 13:57:49 -05:00
Ben Meadors
4128d75ad4
IS_ONE_OF macro to make long chains of conditions more concise and easy to follow (#4860)
* Is one of macro

* Moar

* Whoops

* Trunk

* isOneOf function backed macro
2024-09-25 13:50:00 -05:00
Augusto Zanellato
ed4527cfa5
address review comments 2024-09-25 20:02:22 +02:00
Ben Meadors
a7c379961a New detection sensor trigger type value 2024-09-25 07:01:15 -05:00
Ben Meadors
02d9d8b76c
Merge branch 'master' into detsensor_broadcast_changes 2024-09-25 06:30:09 -05:00
todd-herbert
d1138d51e5
Wrangle module frames with I2C keyboard (#4817)
* Only suppress UI nav if module using keyboard input

* CardKB combo to dismiss text message and waypoint
Currently assigned to Fn + Delete
2024-09-25 06:27:04 -05:00
Ben Meadors
31e952c72e
Merge branch 'master' into detsensor_broadcast_changes 2024-09-25 06:26:14 -05:00
David
9456c42fc0
Refactor AccelerometerThread.h (#4831)
* Initial upload

* Tidy up

* Update ICM20948Sensor.cpp

* Update AccelerometerThread.h

* Initial upload

* Tidy up

* Update ICM20948Sensor.cpp

* Update AccelerometerThread.h

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-09-25 06:25:31 -05:00
David
40b3dbaa70
Add MAX17048 lipo fuel gauge (#4851)
* Initial commit

* Update MAX17048Sensor.cpp

* Update EnvironmentTelemetry.cpp

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-09-25 05:34:53 -05:00
Augusto Zanellato
01d42d4728
Merge branch 'master' into detsensor_broadcast_changes 2024-09-24 11:53:41 +02:00
Augusto Zanellato
ce480ae626
fix comment style 2024-09-24 11:16:04 +02:00
Ben Meadors
c442cd7267 Remove some straggler now 2024-09-23 15:53:42 -05:00
Jonathan Bennett
fa1cc59841
Rename message length headers and set payload max to 255 (#4827)
* Rename message length headers and set payload max to 255

* Add MESHTASTIC_PKC_OVERHEAD

* compare to MESHTASTIC_HEADER_LENGTH

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
2024-09-23 09:20:32 -05:00
Augusto Zanellato
d4dc4dec76
Merge branch 'master' into detsensor_broadcast_changes 2024-09-23 16:20:20 +02:00
Augusto Zanellato
be01c18c74
DetectionSensor: more flexible triggering 2024-09-23 16:15:44 +02:00
Ben Meadors
e8829b8f52
Refactor and consolidate time window logic (#4826)
* Refactor and consolidate windowing logic

* Trunk

* Fixes

* More

* Fix braces and remove unused now variables.

There was a brace in src/mesh/RadioLibInterface.cpp that was breaking
compile on some architectures.

Additionally, there were some brace errors in
src/modules/Telemetry/AirQualityTelemetry.cpp
src/modules/Telemetry/EnvironmentTelemetry.cpp
src/mesh/wifi/WiFiAPClient.cpp

Move throttle include in WifiAPClient.cpp to top.

Add Default.h to sleep.cpp

rest of files just remove unused now variables.

* Remove a couple more meows

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
2024-09-23 08:58:14 -05:00
Tom Fifield
1f8aa1efc7
Minor fix (#4666)
* Minor fixes

It turns out setting a map value with the index notation causes
an lookup that can be avoided with emplace. Apply this to one line in
the StoreForward module.

Fix also Cppcheck-determined highly minor performance increase by
passing gpiochipname as a const reference :)

The amount of cycles used on this laptop while learning about these
callouts from cppcheck is unlikely to ever be more than the cycles
saved by the fixes ;)

* Update PortduinoGlue.cpp
2024-09-23 18:22:06 +08:00
Thomas Göttgens
6ffdc9875b First stab at ESP32-C6 support for TLora-C6 2024-09-20 19:37:47 +02:00
Ben Meadors
91b4199f9d
Revert "DetectionSensor: broadcast all state changes" (#4776) 2024-09-19 10:46:18 -05:00
Augusto Zanellato
2ebfcea94e
DetectionSensor: broadcast all state changes
Closes #4753
2024-09-18 19:43:23 +02:00
Tom Fifield
35e1c401e2
PMSA0031 sensors require ~3secs before coming up on I2C (#4743)
* PMSA0031 sensors require ~3secs before coming up on I2C

As reported by @MALAONE1 and debugged by @shodan8192 , PMSA0031s
on a RAK4631 take 3 seconds before they can become detectable on I2c.

Add a delay(4000) before I2C scan if the air quality sensor pin
is defined.

Fixes https://github.com/meshtastic/firmware/issues/3690

* Remove 4 second wait and rescan during air quality init for the sensor

* works without but this triggers my OCD

---------

Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-09-18 10:12:49 -05:00
Jonathan Bennett
2d52803dbd
Add new admin error types (#4750)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-09-17 21:09:24 -05:00
Ben Meadors
2a6921292e
Implement CoT detail support in TAKPacket (#4748)
* Implement CoT detail support in TAKPacket

* dest, src

* More coffee is needed

* SAVE
2024-09-17 10:05:55 -05:00
Andre K
db4dc88d6f
feat: enable remote admin to set/clear fixed positions (#4713)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-09-17 06:50:49 -05:00
Jonathan Bennett
3a10a27851
Actually restrict remote hardware to gpio channel (#4717) 2024-09-15 06:27:59 -05:00
GUVWAF
8893529653
Make local stats number of Rx packets sum of good and bad (#4709) 2024-09-14 17:53:27 -05:00
Ben Meadors
9ac0e26d42
Add option to preserve private key for factory reset (config) (#4679)
* Add option to preserve private key for factory reset (config)

* Typo fix

* Copy the key in the right direction, and set the size.

* Don't set the key size back to 0 right after setting it to 32.

* Set the key size before using it to do a memcpy.

* Use the right key_size for backing up private_key

* Don't factoryReset() for a missing nodeDB

* Disable Bluetooth in AdminModule when resetting device settings or nodeDB to avoid race

* Add checks for valid objects before deinit bluetooth

* Add disableBluetooth to handleSetConfig, handleSetModuleConfig, and commit settings

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
2024-09-11 08:42:26 -05:00
Ben Meadors
013021941e
Remove scaling of smart position broadcast minimum interval specifically (#4677)
* Remove scaling of smart position broacast minimum interval specifically

* Trunk
2024-09-10 15:30:40 -05:00
GUVWAF
2f9dcee954 Fix size calculation of route/SNR array 2024-09-09 19:13:00 +02:00
Tom Fifield
e9d55de3cb
Fix out-of-bound array access in T1000X Sensor (#4663)
if u8i == 135, then u8i++ runs, the loop exits since u8i == 136,
then value for u8i is 136 after the for loop.

then in the next line, ntc_res2[u8i] will read past the end
 of the array
2024-09-09 07:54:11 -05:00
gitbisector
9651b5a0ec
Merge branch 'master' into batt_stat 2024-09-06 17:23:38 -07:00
git bisector
2f2ddae12a Report PWD when no battery present. 2024-09-06 17:19:53 -07:00
Thomas Göttgens
8f35a42f4f
tryfix #4384 (#4642)
* tryfix #4384 - don't assume we want that functionality if the Accelerometer was found. This is only for T-Watch

* Add  config.display.wake_on_tap_or_motion default to RAK

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-09-06 06:55:56 -05:00
Robert Fisk
962d9ff220 Move defines to input broker 2024-09-06 11:54:31 +02:00
Robert Fisk
8e0a342f06 Gather canned message magic numbers into header defines. 2024-09-06 11:54:31 +02:00
Tom Fifield
9e55e6befb
Minor GPS fixes (#4630)
1. Remove unused line in GPS::probe
2. update new PositionModule::hasQualityTimeSource to handle
 MESHTASTIC_EXCLUDE_GPS
2024-09-05 06:16:06 -05:00
Thomas Göttgens
e543b61dd8 trunk fmt 2024-09-02 10:23:31 +02:00
David
d93425fde1
Merge branch 'master' into BMP388 2024-09-02 16:48:38 +10:00
GUVWAF
56223710b5
More priorities for different types of MeshPackets (#4606) 2024-09-01 10:29:53 -05:00
David
eb1f80f520 Fix build issue with mutex 2024-08-31 19:40:54 +10:00
David
6c0911038a
Merge branch 'master' into BMP388 2024-08-31 18:18:26 +10:00
David
644e213b13 Added a singleton wrapper for bmp3xx 2024-08-31 18:15:33 +10:00
Ben Meadors
33eb073535
Ignore (from)Net time on positions with an unknown or fixed location source (#4593)
* Ignore (from)Net time on positions with an unknown or fixed location source

* Dunk a trunk
2024-08-30 19:02:48 -05:00
Jonathan Bennett
2b0113ae82
Consider an admin timestamp to be higher quality than from net (#4589) 2024-08-30 06:02:48 -05:00
Jonathan Bennett
5bc17a9911
Key regen and MQTT fix (#4585)
* Add public key regen

* Properly label and handle PKI MQTT packets

* Extra debug message to indicate PKI_UNKNOWN_PUBKEY

* Ternary!

* Don't call non-existant function on stm32

* Actually fix STM32 compilation
2024-08-29 16:28:03 -05:00
David
47e1580a62 Integration test 2024-08-29 16:40:17 +02:00
David
fc1e60ac58 Initial upload 2024-08-29 16:40:17 +02:00
Jonathan Bennett
5824a8f4c1
Deal with admin_key being repeated (#4558) 2024-08-26 12:29:44 -05:00
Jonathan Bennett
601ae29fe9
Adds has_x bools to position packet. (#4540) 2024-08-23 06:25:40 -05:00
Ben Meadors
ff500bc5a9
Save nodedb after favoriting (or removing) (#4537) 2024-08-22 20:57:03 -05:00
Jonathan Bennett
ab7de7f6a0
Add handling for sessionkey config (#4513)
* Add handling for sessionkey config

* Protos

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-20 13:36:24 -05:00
Mictronics
6ee30043c3
Fix array out of bounds read. (#4514)
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28

* Merge PR #420

* Fixed double and missing Default class.

* Use correct format specifier and fixed typo.

* Removed duplicate code.

* Fix error: #if with no expression

* Fix warning: extra tokens at end of #endif directive.

* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.

* Fix deprecated macros.

* Set RP2040 in dormant mode when deep sleep is triggered.

* Fix array out of bounds read.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-20 13:36:10 -05:00
Jonathan Bennett
48dc222b75
Merge branch 'master' into 2.5-changes 2024-08-19 11:28:20 -05:00
Jonathan Bennett
ab9268cba9 Admin session key debugging messages 2024-08-19 11:12:42 -05:00
Mictronics
6de3ca4301
Fix deprecated macros. (#4505)
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28

* Merge PR #420

* Fixed double and missing Default class.

* Use correct format specifier and fixed typo.

* Removed duplicate code.

* Fix error: #if with no expression

* Fix warning: extra tokens at end of #endif directive.

* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.

* Fix deprecated macros.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-19 07:09:09 -05:00
Ben Meadors
14146d6ff5 Ms! 2024-08-19 07:04:48 -05:00
Jonathan Bennett
94d5ee9fe6 Deal with adminModule session_time of 0 2024-08-18 22:22:21 -05:00
Jonathan Bennett
7b64c4a5bf
Merge branch 'master' into 2.5-changes 2024-08-18 19:14:21 -05:00
Jonathan Bennett
ecb4fb72db Don't break EXCLUDE_PKI 2024-08-18 15:51:43 -05:00
Jonathan Bennett
bfbc4bf93a Set the private_key in crypto when changed by admin 2024-08-18 14:11:17 -05:00
Jonathan Bennett
22e129e716 bluetooth != security; security = security 2024-08-18 13:00:52 -05:00
Andre K
e3e36e23f9
add admin getter for SECURITY_CONFIG (#4499) 2024-08-18 09:13:53 -05:00
Rafael Cortês
7129cee944
feature: default to fuzzy GPS location on the Default Channel (#4467)
* feature: default to fuzzy GPS location on the Default Channel

* Default to 13

* 13 default

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-18 07:38:54 -05:00
Jonathan Bennett
c7c620ac69
Merge branch 'master' into 2.5-changes 2024-08-17 17:38:39 -05:00
Jonathan Bennett
1bbc273ba6
Don't reject network time updates unintentionally (#4489) 2024-08-17 17:35:05 -05:00
GUVWAF
33ced7e87a
Add two-way traceroute result with SNR per hop (#4485)
* Add two-way traceroute result with SNR per hop

* Update protos
2024-08-17 17:34:32 -05:00
Jonathan Bennett
daddaf7146
Merge branch 'master' into 2.5-changes 2024-08-17 12:24:19 -05:00
Ben Meadors
5ff1078c8c
Move NeighborInfo interval default to 6 hours (double NodeInfo) (#4483)
* Move NeighborInfo in line with NodeInfo

* Set default to 6 hours and cap minimum at 2 hours
2024-08-17 11:51:53 -05:00
Jonathan Bennett
f86dde3c40
AdminModule session_passkey (#4478)
* Protobuf

* Adds session_passkey for remote admin changes
2024-08-17 08:41:12 -05:00
Ben Meadors
fdaaf71366
Merge branch 'master' into 2.5-changes 2024-08-17 08:01:15 -05:00
Ben Meadors
9dad62e3c4
Set time-only admin command (#4479) 2024-08-17 05:52:36 -05:00
todd-herbert
e0b4a8e31e
Radio Master Joystick (#4476)
* Radio Master Bandit 5-Way Joystick: first draft
Untested on genuine hardware

* "Okay" moves to next frame, even when canned message disabled

* Refactor to allow easier customization

* Implement feedback from testing
* guard toggleGPS()
* show "Shutting down.." screen
* split adhoc ping alert onto two lines

* Don't block while waiting for shutdown
Was preventing the alert from showing
2024-08-17 05:51:53 -05:00
Jonathan Bennett
6eabbaf432 Add PKI logiv to KNOWN_ONLY and LOCAL_ONLY routing modes. 2024-08-16 19:37:28 -05:00
Ben Meadors
e61bd84116
Send local stats telemetry to phone every 15 minutes (#4475)
* Send local stats telemetry to phone every 10 minutes

* Add debug log and bump to 15 minutes

* Tronk

* Explicit has_ optional
2024-08-16 17:15:51 -05:00
Jonathan Bennett
ef56fae976
Merge branch 'master' into 2.5-changes 2024-08-15 11:21:25 -05:00
Ben Meadors
d398419aef
Router and sensor are impolite (#4468) 2024-08-15 08:47:49 -05:00
Jonathan Bennett
1be635a797 Merge remote-tracking branch 'origin/master' into 2.5-changes 2024-08-14 19:01:06 -05:00
Jonathan Bennett
8ef72a5c08
Shorter nodeinfo timeout redux (#4458)
* Add shorterTimeout bool to sendOurNodeInfo

* Respond to likely PKI decode errors with a quick nodeinfo

* Protbufs

* Move to PKI_UNKNOWN_PUBKEY for PKI decode error
2024-08-14 17:17:53 -05:00
Ben Meadors
efc27f2051
Initial telemetry with time and variant tags (#4463) 2024-08-14 16:24:28 -05:00
Ben Meadors
207b9b49a5
Always attempt to set NTP or GPS time on a fresh position packet (#4460) 2024-08-14 07:42:30 -05:00
Jonathan Bennett
f3fa8daedf Revert "Add Routing_Error_NONE"
This reverts commit e1985fa0f9.
2024-08-13 18:45:40 -05:00
Jonathan Bennett
308c0a6bb8 Add Routing_Error_NONE 2024-08-13 18:45:40 -05:00
Jonathan Bennett
b726792efd Re-implement PKI from #1509 (#4379)
* Re-implement PKI from #1509
co-authored-by: edinnen <ethanjdinnen@protonmail.com>

* Set the key lengnth to actually make PKI work.

* Remove unused variable and initialize keys to null

* move printBytes() to meshUtils

* Don't reset PKI key son reboot unless needed.

* Remove double encryption for PKI messages

* Cleanup encrypt logic

* Add the MESHTASTIC_EXCLUDE_PKI option, and set it for minimal builds. Required for STM32 targets for now.

* Use SHA-256 for PKI key hashing, and add MESHTASTIC_EXCLUDE_PKI_KEYGEN for STM32

* Fix a crash when node is null

* Don't send PKI encrypted packets while licensed

* use chIndex 8 for PKI

* Don't be so clever, that you corrupt incoming packets

* Pass on channel 8 for now

* Typo

* Lock keys once non-zero

* We in fact need 2 scratch buffers, to store the encrypted bytes, unencrypted bytes, and decoded protobuf.

* Lighter approach to retaining known key

* Attach the public key to PKI decrypted packets in device memory

* Turn PKI back off for STM32 :(

* Don't just memcp over a protobuf

* Don't PKI encrypt nodeinfo packets

* Add a bit more memory logging around nodeDB

* Use the proper macro to refer to NODENUM_BROADCAST

* Typo fix

* Don't PKI encrypt ROUTING (naks and acks)

* Adds SecurityConfig protobuf

* Add admin messages over PKI

* Disable PKI for the WIO-e5

* Add MINIMUM_SAFE_FREE_HEAP macro and set to safe 1.5k

* Add missed "has_security"

* Add the admin_channel_enabled option

* STM32 again

* add missed configuration.h at the top of files

* Add EXCLUDE_TZ and RTC

* Enable PKI build on STM32 once again

* Attempt 1 at moving PKI to aes-ccm

* Fix buffers for encrypt/decrypt

* Eliminate unused aes variable

* Add debugging lines

* Set hash to 0 for PKI

* Fix debug lines so they don't print pointers.

* logic fix and more debug

* Rather important typo

* Check for short packets before attempting decrypt

* Don't forget to give cryptoEngine the keys!

* Use the right scratch buffer

* Cleanup

* moar cleanups

* Minor hardening

* Remove some in-progress stuff

* Turn PKI back off on STM32

* Return false

* 2.5 protos

* Sync up protos

* Add initial cryptography test vector tests

* re-add MINIMUM_SAFE_FREE_HEAP

* Housekeeping and comment fixes

* Add explanatory comment about weak dh25519 keys

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-13 18:43:19 -05:00
Ben Meadors
464f270b12
More explicit guards for attempting to set RTC (#4452)
* Guard against timesources from the mesh if we have good time

* Trunk

* Consider phone time in the past 24 hours authoritative as well

* Rename

* GPS can be null

* Declaration

* Remove RemoteHardware

* Explicitly remove GPS

* Exclude GPS earlier for RAK2560
2024-08-13 06:56:20 -05:00
Mictronics
8daebf80dd
Fix warning: extra tokens at end of #endif directive. (#4432) 2024-08-10 12:32:52 -05:00
GUVWAF
debf4b934f
Fix for "has default channel" with empty channel name (#4430) 2024-08-09 15:26:22 -05:00
Ben Meadors
3878e025e4
Split factory reset into config and device variants (#4427)
* Split factory reset into config and device variants

* Trunk

* Default only in header
2024-08-09 08:38:29 -05:00
Jonathan Bennett
789e8f02bf
Add more exclude options to save program ram/flash (#4408)
* Add PowerFSM Exclude option

* Add TEXTMESSAGE module exclude option

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-06 18:48:55 -05:00
todd-herbert
92526fca23
"Scan and Select" input for Canned Messages (#4365)
* Add "Scan and Select" input method for canned messages

* Adapt canned message drawing if USE_EINK
* Indicate current selection with indent rather than inverse text
* Avoid large text on "sending" and delivery report pop-ups
* Fit SNR and RSSI details on screen

* Change hash function which detects changes in E-Ink images
The old function struggled to distingush between images on the canned-message frame, failing to update when scrolling between messages. No real justification for the new algorithm, other than "it works" and doesn't seem "too expensive". For context, this function runs once a second.

* Use canned messages (scan and select) by default with HT-VME213 and HT-VME290

* Guard for HAS_SCREEN
2024-08-06 17:16:56 -05:00
geeksville
66c41e683d
bug #4184: fix config file loss due to filesystem write errors (#4397)
* Use SafeFile for atomic file writing (with xor checksum readback)
* Write db.proto last because it could be the largest file on the FS (and less critical)
* Don't keep a tmp file around while writing db.proto (because too big to fit two files in the filesystem)
* generate a new critial fault if we encounter errors writing to flash
either CriticalErrorCode_FLASH_CORRUPTION_RECOVERABLE or CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE
(depending on if the second write attempt worked)
* reformat the filesystem if we detect it is corrupted (then rewrite our config files) (only on nrf52 - not sure
yet if we should bother on ESP32)
* If we have to format the FS, make sure to preserve the oem.proto if it exists

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-06 13:59:06 -05:00
geeksville
c1870f91fc
Finish powermon/powerstress (#4230)
* Turn off vscode cmake prompt - we don't use cmake on meshtastic

* Add rak4631_dap variant for debugging with NanoDAP debug probe device.

* The rak device can also run freertos (which is underneath nrf52 arduino)

* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135

* powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 )

* oops - mean't to mark the _dbg variant as an 'extra' board.

* powermon wip

* Make serial port on wio-sdk-wm1110 board work
By disabling the (inaccessible) adafruit USB

* Instrument (radiolib only for now) lora for powermon
per https://github.com/meshtastic/firmware/issues/4136

* powermon gps support
https://github.com/meshtastic/firmware/issues/4136

* Add CPU deep and light sleep powermon states
https://github.com/meshtastic/firmware/issues/4136

* Change the board/swversion bootstring so it is a new "structured" log msg.

* powermon wip

* add example script for getting esp S3 debugging working
Not yet used but I didn't want these nasty tricks to get lost yet.

* Add PowerMon reporting for screen and bluetooth pwr.

* make power.powermon_enables config setting work.

* update to latest protobufs

* fix bogus shellcheck warning

* make powermon optional (but default enabled because tiny and no runtime impact)

* tell vscode, if formatting, use whatever our trunk formatter wants
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)

Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs.  I guess I'll start letting that happen with
my future commits ;-).

* add PowerStress module

* nrf52 arduino is built upon freertos, so let platformio debug it

* don't accidentally try to Segger ICE if we are using another ICE

* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.

* remove NoopPrint - it is no longer needed

* when talking to API clients via serial, don't turn off log msgs instead encapsuate them

* fix the build - would loop forever if there were no files to send

* don't use Segger code if not talking to a Segger debugger

* when encapsulating logs, make sure the strings always has nul terminators

* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.

* Important to not print debug messages while writing to the toPhone scratch buffer

* don't include newlines if encapsulating log records as protobufs

* update to latest protobufs (needed for powermon goo)

* PowerStress WIP

* for #4154 and #4136 add concept of dependent gpios...
Which is currently only tested with the LED but eventually
will be used for shared GPIO/screen power rail enable
and LED forcing (which is a sanity check in the power stress
testing)

* fix linter warning

* Transformer is a better name for the LED input > operation > output classes

* PMW led changes to work on esp32-s3

* power stress improvements

* allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types

This allows 'lossless' log reading.  If client has requested INDICATE
(rather than NOTIFY) each log record emitted via log() will have to fetched
by the client device before the meshtastic node can continue.

* Fix serious problem with nrf52 BLE logging.
When doing notifies of LogRecords it is important to use the
binary write routines - writing using the 'string' write won't work.
Because protobufs can contain \0 nuls inside of them which if being
parsed as a string will cause only a portion of the protobuf to be sent.
I noticed this because some log messages were not getting through.

* fix gpio transformer stuff to work correctly with LED_INVERTED

Thanks @todd-herbert for noticing this and the great stack trace.
The root cause was that I had accidentially shadowed outPin in a subclass
with an unneeded override.  It would break on any board that had inverted
LED power.

fixes
https://github.com/meshtastic/firmware/pull/4230#pullrequestreview-2217389099

* Support driving multiple output gpios from one input.

While investigating https://github.com/meshtastic/firmware/pull/4230#pullrequestreview-2217389099
I noticed in variant.h that there are now apparently newer TBEAMs than mine
that have _both_ a GPIO based power LED and the PMU based LED.  Add a splitter
so that we can drive two output GPIOs from one logical signal.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-06 12:35:54 -05:00
geeksville
1a38c4e51d
Remove LED_INVERTED, see below for why ;-) (#4382)
While working on #4378 I noticed a funny problem: the blinking system
LED was on during deep-sleep.  Initially I thought it was some weird
sleep hw config thing but it turns out it was easier but more pervasive.

We had two different preprocessor symbols which both meant approximately the same
thing LED_INVERTED and LED_STATE_ON (though their polarity was opposite).
Some variant files were setting one, others were setting the other, and others were
setting both. heh.

In the case of the board I was testing (seeed tracker wio 1100) it was only setting one
and the default behavior for the other (for all boards) was incorrect.  So I did a grep
and it seems like LED_STATE_ON was used more often, so I kept that one and removed
LED_INVERTED everywhere.
2024-08-05 06:02:32 -05:00
Ken Piper
5bbafdfd31
Configure pin modes of selected pins before attempting to write to them (#4385) 2024-08-04 06:06:36 -05:00
todd-herbert
4b4c1669a9
Initial support for HT-VME290, sleep fixes for HT-VME213 (#4334)
* Fix I2C pindefs

* Initial driver testing for HT-VME290

* E-Ink full refresh after canned message pop up

* Tidy variant folders

* Clean ESP32 cpuDeepSleep method
Merge sections, and remove the random assortment of gpio holds left behind.

* Enable 32kHz in variant.h

* Orient E290 with LoRa antenna facing up

* Revert "Clean ESP32 cpuDeepSleep method"

This reverts commit cb8ee508ec2d6bc27a8e228021fd1efbd034c4a0.

* Reduce deep-sleep current for VME213 (non-intrusive)
Originally I made an attempt at tidying up the cpuDeepSleep method, but have reverted that. New commit makes only the changes needed to support VME213. Don't really want the headache of breaking sleep for other variants, especially when this PR is just about implementing new boards.

* Update lib_deps; remove board_level extra
2024-08-02 14:03:59 +12:00
Jonathan Bennett
d2ea430a3e
Make SPI frequency and TOPHONE queue size configurable on Native (#4369)
* Make SPI frequency configurable on Native

* Make the tophone queue size configurable for Portduino

* The modified SPISettings must be configured in setup(), after config.yaml is processed

* make MeshService a pointer, so we can configure MAX_RX_TOPHONE at run time

* Got a little over excited with refactoring

* Silence a warning
2024-08-01 19:29:49 -05:00
Ben Meadors
bcdda4de8a Missed some includes of userPrefs that would allow behavior we don't want 2024-07-31 08:53:59 -05:00
Ben Meadors
24ecfa1a45 Trunk fmt 2024-07-31 07:42:23 -05:00
Sylvain Migaud
106a50bce2
Adding support for Chatter keypad (#4022)
* Adding support for Chatter keypad

* Remove user button mapping since full keypad is now useable

* Adding TAB key and RIGHT to allow selecting a destination

* Fix shift bug (there's only three levels, not four)

* reformat file

* Fix bug with fast repeated keypresses

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-07-31 07:38:21 -05:00
Tom Fifield
103ab0c242
Cleanup - remove unused defines. (#4353)
* Cleanup - remove unused defines.

There were a number of defined variables that were carried over
from old code. - Removed.
Also a typo. - Fixed fix.
Also duplicate definitions of the number of seconds in a day.
-deduplicated.

* Cleanup - remove unused defines.

There were a number of defined variables that were carried over
from old code. - Removed.
Also a typo. - Fixed fix.
Also duplicate definitions of the number of seconds in a day.
-deduplicated.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-07-31 06:56:06 -05:00
Michael Gjelsø
1951569b1a
PA FAN Disable (#4355)
* PA FAN Disable

* PA FAN Disable

* Trunk

* Trunk

* Trunk

* Thunk .....
2024-07-30 15:05:51 -05:00
Ben Meadors
59cc57fc29
Event mode: Enforce reliable hop limit and disallow default public MQTT (#4343)
* Event mode: Enforce reliable hop limit

* Event mode: Short circuit wantsLink on MQTT for default broker address

* Just enforce at channels level since everything uses this

* For events never forward packets with excessive hop_limit

* In EVENT_MODE, don't respond with hop_limit set more then the configured max.

* Correct hop_start when correcting hop_limit in event mode.

* Make EVENT_MODE work from userPrefs.h

* Event mode: Disallow Router or Repeater roles

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
2024-07-29 20:16:47 -05:00
Thomas Göttgens
4b0bbb8af1
Make STM compile again and update toolchain. (#2960)
* Make STM compile again and update toolchain. The binary is too big for the flash. WIP

* Making progress with OSFS, still WIP

* more progress, still too big. Adding RAK3172 to the equasion

* Make STM compile again and update toolchain. The binary is too big for the flash. WIP

* Making progress with OSFS, still WIP

* more progress, still too big. Adding RAK3172 to the equasion

* still too big

* minimize build

* trunk fmt

* fix a couple of symbol clashes

* trunk fmt

* down to 101% with a release vs. debug build and omitting the flash strings

* fix compilation

* fix compilation once more

* update protobufs linkage

* - Toolchain updated
- Fixed macro error

* silence compiler warning
note: do something about this assert...

* new toolkit and fix Power.cpp

* STM32WL make it fit (#4330)

* Add option to exclude I2C parts

The I2C hals and related code uses a significant amount of flash space and aren't required for a basic node.

* Add option to disable Admin and NodeInfo modules

Disabled by default in minimal build. This saves a significant amount of flash

* Disable unused hals

These use up significant flash

* Add float support for printf for debugging

Makes serial look nice for debugging

* This breaks my build for some reason

* These build flags can save a bit of flash

* Don't disable NodeInfo and Admin modules in minimal build

They fit in flash

* Don't include printf float support by default

Only useful for debugging

---------

Co-authored-by: Adam Lawson <dev@goshawk22.uk>

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Adam Lawson <dev@goshawk22.uk>
2024-07-25 20:16:21 -05:00
dylanli
a000a8d347
Support Seeed Tracker-T1000-E (#4303)
* feature-T1000-E: add Added the board definition for T1000-E

-  integrate a script for rapid dependency download that is compatible with both Linux and Windows platforms.
-  add the pin definitions for UART, SPI, GPIO, and other peripherals have been ensured to be correct.
-  add the env configuration for PlatformIO.

* refact-T1000-E: redefine T1000-E board

* feature-T1000-E: add basic sensors

* feature-T1000-E: add button init

* feat: add DRADIOLIB_GODMODE defination for use function setDioAsRfSwitch to DIO LORA RF

* feat : add gps(GNSS_Airoha) sleep mode

* feat: add behavier when rec or send message

* chore: hang IIC bus usage to avoid sensor address conflict

* feat: add sensor data acquisition

* feat : support Airoha GPS

- add disable it in FSM
- update  lookForTime and lookForLocation function

* fix: fix a bug

* version: change version to 0.9.0

* Update tracker-t1000-e.json

Remove a space

* Delete variants/tracker-t1000-e/run_once.sh

Delete not need as we will change platformio.ini

* Update platformio.ini

Update SoftDevice 7.3.0 usage in line with other lr1110 targets

Do we need to keep GODMODE ?

* fix: Button behavier incorrect bug

* fix:remove some invaild code of TextMessageModule

* fix: remove invaild comment

* version: change version to 0.9.1

- update mark's patch
- remove some invaild code and comments
- fix button behavier

* trunk format

* fix:  HELTEC_CAPSULE_SENSOR_V3 block got accidentally deleted

* fix: EnvironmentTelemetry upstream merge went awry.

* fix: Added macro definitions to ensure correct operation of LORA section

* fix :GNSS_AIROHA macro defination in line with others

* fix: upstream backmerge accidentally.

* fix: wrap macro PIN_3V3_EN BUZZER_EN_PIN GNSS_AIROHA in the TRACKER_T1000_E macro guard

---------

Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
2024-07-24 21:10:38 -05:00
Ben Meadors
0d2a9b6282
Fix de/compression buffer overflows in TAK packets (#4317)
* Fix de/compression buffer overflows in TAK packets

* Log message
2024-07-23 06:16:53 -05:00
Thomas Göttgens
7568a35372 fix build and probably break GPS 2024-07-22 17:09:46 +02:00
Thomas Göttgens
94a10e011c
Merge branch 'master' into wio-lr1110-refresh 2024-07-22 15:37:34 +02:00
Thomas Göttgens
bdd1c53072 Revert "Sync Wio lr1110 refresh with master (#4288)"
This reverts commit 5cc8ca59a3.

Revert "Sync Wio lr1110 refresh with master (#4251)"

This reverts commit d97e6b86b8.

Revert "update SD_FLASH_SIZE to 0x27000 (#4232)"

This reverts commit 2df8093fef.
2024-07-22 15:30:36 +02:00
Tavis
fa6624548b
Serial Mode for Ecowitt WS85 weather station. (#4296)
* protobufs

* initial mods, not tested

* manual telem packet creation, compiles.

* add gust and lull computation

* telem packet is getting fired off

* new pb ?

* pb and gust lull

* need to set the variant type for it to work.

* add gust and lull to mqtt json output.

* parse bat voltage and cap voltage and send the larger of the two in telem packet

also use the new ws85 serial mode (6).  must set it with cli. : meshtastic --set serial.mode 6

* set hard coded average/transmit interval to 5 minutes.

* proper direction averging with trig.

* Update protobufs

* sweep some crud

* read in 512 bytes at a time and break and clear serial input if we got wind data

* factor out sendTelemetry function

* Revert "factor out sendTelemetry function"

This reverts commit b61ba1a3c5.

* Reapply "factor out sendTelemetry function"

This reverts commit d0af9cfd7d.

* update protobufs

* put WS85 Serial2 is tcho and canaryone exclusion #ifdef

* include GeoCoord.h so dr-dev will compile.

* remove old TODO comment.

* breakout WS85 serial operation to it's own function called processWXSerial()

* canaryone and t-echo exclusion for Serial2

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-07-21 07:09:37 -05:00