mirror of
https://github.com/meshtastic/firmware.git
synced 2025-08-04 04:40:50 +00:00
94df0cb636
127 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
oscgonfer
|
94df0cb636 | SEN5X first pass | ||
|
oscgonfer
|
9604dadc45 | Fixes on compilation for different variants | ||
|
oscgonfer
|
8ee83697cc | Add missing warmup period to wakeUp function | ||
|
oscgonfer
|
ce2a3a03ab | Fixes on PMS class | ||
|
oscgonfer
|
401e3c8fee | Move PMSA003I to separate class and update AQ telemetry | ||
|
Chloe Bethel
|
d494c23a88
|
Enable telemetry and I2C sensors on STM32WL (except accelerometers) (#7008)
* Update platformio inis for stm32 platform and wio-e5 variant for enabling i2c * Don't reference timezone functions if MESHTASTIC_EXCLUDE_TZ is defined * Use custom pow_of_two in RadioInterface instead of floating-point pow() * First pass: enable sensors for STM32wL * Fix AirQualityTelemetryModule being created if the PM25AQI header is missing * Link in power sensor libraries * more ini tweaks * Add =1 to EXCLUDE defines, fix indentation. * Drop HAS_WIRE in ini, it's defined in architecture.h * Fix build when power sensor libraries are missing Make MAX sensor integration into Power.cpp optional based on its library header existing. Also make NullSensor expose a voltage and current sensor, because Power calls directly into these for INA sensors. This lets us remove all the deps for the STM32WL platform. * Change default I2C for RAK3172 to be I2C1, not I2C2 * Respect the laws of mathematics (oops) |
||
|
Jonathan Bennett
|
4feaec651f
|
Unify the native display config between legacy display and MUI (#6838)
* Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
Justin E. Mann
|
2fb46ce5d5
|
Add rak12035 VB Soil Monitor Tested & Working (#6741)
* [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * Update to 1.0.4 release of RAK12035_SoilMoisture * cleanup * cool * . * .. * little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500 looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500. improvements could be made around the configuration of the monitor. next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity. * . comments about current limitations and TODOs * trunk update * trying to autoformat.. * fix formatting attempt 2 * .. * ... * ... * . * some corrections and local build success * correction in temp code * grr formatting * cleanup after a few experiments * remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos. * update some values in varient for rak wistap * working out trunk formatting.. * wip . corrections to other build variants * . * protobuffs? * protobufs? * Update protobufs ref * Protobufs ref * Trunk * Update RAK12035Sensor.cpp * Fmt * comment changes * dumb mistakes... resolved, actually built and tested.. all good.. * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * . proto submod * proto * proto * merge master * mabe a fix for GPS pin conflict, waiting on a new gps module to try * merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035 * . * . --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
Nivek-domo
|
1a6bb97f16
|
Fix RCWL9620Sensor for rak11310 support (#6617)
* Update RCWL9620Sensor.cpp test on rak11310, work very wel now * Update RCWL9620Sensor.cpp * Trunk --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Andy Shinn
|
f1dd623ce9
|
allow overriding INA3221 channels (#7035)
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> |
||
|
ArgoNavi
|
f9d4fdbb52
|
Update TSL2591Sensor.cpp (#6921)
Lower gain and timing to avoid saturation in bright light |
||
|
dmarman
|
cb9429e83e
|
Added full support for LTR390UV readings of UV and Lux (#6872)
* Added full support for LTR390UV readings of UV and Lux * Trunk formatting * Added full support for LTR390UV readings of UV and Lux * Trunk formatting * fix library check and unnecessary bit resolution change * fixed log info messages and removed unused dependency * Hopefully fixes git mess * fix variable scope and getMetrics returns * set metrics flags bavk to false in case something wrong happens while reading LTR390UV mode --------- Co-authored-by: Domingo <domingo@waxman.local> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Michael Cullen
|
7d95b487ef
|
Add PCT2075 Temperature Sensor (#6829)
Some checks are pending
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / build-debian-src (push) Waiting to run
CI / package-pio-deps-native-tft (push) Waiting to run
CI / test-native (push) Waiting to run
CI / docker-deb-amd64 (push) Waiting to run
CI / docker-deb-amd64-tft (push) Waiting to run
CI / docker-alp-amd64 (push) Waiting to run
CI / docker-alp-amd64-tft (push) Waiting to run
CI / docker-deb-arm64 (push) Waiting to run
CI / docker-deb-armv7 (push) Waiting to run
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
CI / publish-firmware (push) Blocked by required conditions
This is an I2C temperature sensor. It is intended to be a drop-in compatible sensor for the LM75, however it is more accurate. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Richard Zhang
|
d9ad2322e8
|
Fixes BUG #6243 Heltec Tracker (#6781)
* fix wireless tracker screen issues * fix SHTC3 BUG * Remove the 32K crystal oscillator option for the Wireless Paper and Vision Master series. * Correct spelling errors * Update src/graphics/Screen.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
Tom
|
62e1974d09
|
Add clarifying note about AHT20 also being included with AHT10 library (#6787)
Some checks are pending
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / build-debian-src (push) Waiting to run
CI / package-pio-deps-native-tft (push) Waiting to run
CI / test-native (push) Waiting to run
CI / docker-deb-amd64 (push) Waiting to run
CI / docker-deb-amd64-tft (push) Waiting to run
CI / docker-alp-amd64 (push) Waiting to run
CI / docker-alp-amd64-tft (push) Waiting to run
CI / docker-deb-arm64 (push) Waiting to run
CI / docker-deb-armv7 (push) Waiting to run
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
CI / publish-firmware (push) Blocked by required conditions
* Update AHT10.h Add clarifying note about AHT20 also being included * Update AHT10.cpp Add clarifying note about AHT20 also being included |
||
|
Jonathan Bennett
|
473ef1bc03
|
Step one of Linux Sensor support (#6673)
* First addition of __has_include for sensor support * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Make TelemetrySensor::setup() a pure virtual finction * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Enable HAS_SENSOR for Portduino * Move back to Adafruit BusIO after patch |
||
|
Chris Danis
|
f5e0e282b6
|
environment: add DPS310 high-accuracy barometer (#6237)
* dps310: initial scan support * dps310 sensor support * new protobufs * new protobufs * address cr --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Tom Fifield
|
8cacdb65d6
|
Fix INA226 Sensor Voltage Readings (#5972)
They were off by a factor of 1000 due to the difference between Volts and MilliVolts, as reported by @morcant . Fixes https://github.com/meshtastic/firmware/issues/5969 |
||
|
Thomas Göttgens
|
973b453d43
|
Update RAK2560 code (#5844)
* * Update RAK9154 sensor to tx remote power telemetry * remove uf2 script, pio run does that inline * move sensor module to correct position * disable LED and Accelerometer code on rak2560 * trunk fmt * mention epaper variant * attention, revert, revert * Enable Environment Telemetry of these values * fix float values |
||
|
Thomas Göttgens
|
b353bcc04a
|
fix detection of lark weather station and add rain sensor (#5874)
* fix detection of lark weather station * fix unit tests and add support for Dfrobot rain gauge * fix name display on bootup * fix gauge init logic * trunk fmt |
||
|
Tom Fifield
|
e1aaafb77a
|
Cherrypick "add more locking for shared SPI devices (#5595) " (#5728)
* add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * mesh-tab: lower I2C touch frequency --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> |
||
|
Thomas Göttgens
|
8b34c4ff05
|
fix misc cppcheck things and compile time warnings (#5710) | ||
|
Thomas Göttgens
|
a2a6b236b7
|
support indicator sensors through Rp2040 serial (#5696)
* support indicator sensors through Rp2040 serial * disable excessive debug printing |
||
|
Ben Meadors
|
2b33be2fea
|
Exclude health telemetry by macro (#5679) | ||
|
nebman
|
80fc0f2bda
|
Detect charging status by measuring current flow with configured INA battery sensor (#5271)
Some checks are pending
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / build-docker (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
* INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * add INA3221 charging detection * RP2040: Update core; add mDNS support (#5355) * Update arduino-pico core * RP2040: Add mDNS support * SimpleMDNS `begin` now returns a bool * Add `-g` option to `debug_build_flags` to link files for gdb * RAK11310 needs old platform as well * Change defines to specific architecture * Core version 4.2.1 is out * Add sudo to apt-get commands for Raspbian Build (#5364) Without sudo, inadequate permissions to runs the commands meant the build was failing. * Typo fix in build_raspbian.yml (#5365) s/sudp/sudo :(:(:( * Rework some things * Trunk * Separate littlefs bundle * version tags * Diag * Add littlefswebui * Bug fixed in ExternalNotificationModule (#5375) While `nagging` setExternalState wasn't written to Buzzer & Vibra so output was never toggled. Possible fix for #5348 * Cleanup static files from bad Web UI bundle on 2.5.13 release (#5376) * Cleanup static files from bad Web UI bundle on 2.5.13 release * Check existence first * Esp32 is the only one we care about * Move some actions to after `startTransmit()` (#5383) To minimize the time between channel scan and actual transmit * [create-pull-request] automated change (#5380) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Allows all 3 PKI keys to be added to userPrefs.h (#4969) and a tool. (#5368) * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * [create-pull-request] automated change (#5388) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * add smiley emoji (#5391) * add smiley emoji * clang-formatted * Anable trace route function on wismeshtap platform (#5389) * fix 'symbal' typo (#5395) * [create-pull-request] automated change (#5399) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * /api/v1/fromradio: add OPTIONS handler for CORS. (#5386) This avoids hitting the 404 Not Found handler, which breaks connection keep-alive, so this change fixes a big performance regression for Web Client in Chrome: https://github.com/meshtastic/firmware/issues/5385 Tested on Heltec V3. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Make heart emoji usable (#5403) * Create a specific hw_model for WisMesh Tap (#5400) * Create a specific hw_model for WisMesh Tap * Trunk * HAS_ETHERNET * Remove it altogether * Don't need these either * Fix RTC time injection and consolidate position logic (#5396) * Fix RTC time injection and consolidate position logic * Comment out unused var warning * Backerds * Update arduino-pico core to fix sporadic hangs (#5406) * Update platform-raspberrypi also (#5407) * Update arduino-pico core to fix sporadic hangs * Update platform-raspberrypi also * --web added to device-install(.sh/.bat) (#5405) * Add --web * Update device-install.bat Forgot a "-" a few places. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * add GPS in indicator board (#5411) * Fixed NMEA sentence issue in CalTopo as well as bug with no printing all of the nodes (#5412) * --web littlefswebui-* typo fix (#5416) * Add --web * Update device-install.bat Forgot a "-" a few places. * Typo fix. * Typo fix --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> * Temporarily disable MDNS when MQTT is enabled (#5418) Leads to a panic * Check for OkToMqtt flag presence before uplinking to MQTT (#5413) * Check for oktomqtt flag presence before uplinking to MQTT * Move to mqtt->onSend * Temetry can respond to want-response for LocalStats variant (#5414) * Seems like the last DIY board that's not "extra" (#5420) * Cherry pick tdeck fixes (#5422) * Try-fix (workaround) T-Deck audio crash * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * dreamcatcher: assign GPIO44 to audio mclk --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> * add canned message and keyboard in indicator board (#5410) * add canned message and keyboard in indicator board * Added virtual keyboard macro and enabled for Indicator * Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Update build-native.sh (#5415) * Update build-native.sh Device-install.sh and device-update.sh are not used on native platform, skip copying to release directory after build and copy native-install.sh and native-run.sh instead. * Update build-native.sh Skip native-run.sh copy * Cleans up visibility in GPS.h (#5426) Signed-off-by: Christopher Hoover <ch@murgatroid.com> * Fix admin key loading from userPrefs.h (#5417) * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR #420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. * Remove log spam when reading INA voltage sensor. * Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots. * Removed newlines from log. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> * try to detect dfrobot station to tell it apart from an ublox gps. (#5393) * Remove BMA-423 and STK8X by default (#5429) * Remove BMA-423 by default * STK * Wrong macro * Helps if you include the file * [create-pull-request] automated change (#5431) Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com> * Support for the ClimateGuard RadSens Geiger-Muller tube (#5425) * fixes https://github.com/meshtastic/firmware/issues/5434 (#5435) * update libpax * fix interval init * Fix memory leaks by adding missing `free()` calls before early returns in `MQTT::onReceive` (#5439) This fix addresses memory leaks in the `MQTT::onReceive` function by ensuring that dynamically allocated resources (`e.channel_id`, `e.gateway_id` and `e.packet`) are properly freed before each early return. Previously, these resources were only freed at the end of the function, leaving them unhandled in certain exit paths. Adding the missing `free()` calls prevents memory leaks and ensures proper resource cleanup in all scenarios. * Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (#5436) Co-authored-by: Tom Fifield <tom@tomfifield.net> * A second round of cleanup on GPS.h. (#5433) * Move yet more stuff out of GPS.h and into file scope. * Protect code macros from eating semicolons. * Remove unused (and unimplemented) getDOPString. * clang-format with project style file on affected files. Signed-off-by: Christopher Hoover <ch@murgatroid.com> * enable MQTT with TLS on RPi picow (#5442) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Don't powersave on Wifi (#5443) * Don't go into light sleep with wifi enabled * Move * Trunk * Revert "Seems like the last DIY board that's not "extra" (#5420)" (#5446) This reverts commit |
||
|
jake-b
|
932966b896
|
Support for the ClimateGuard RadSens Geiger-Muller tube (#5425) | ||
|
Ben Meadors
|
982190936d
|
More log reductions. I'll probably stop now ;-) (#5263)
Some checks are pending
CI / setup (rp2040) (push) Waiting to run
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
|
||
|
Ben Meadors
|
f769c50fa5
|
More reduction (#5256)
Some checks are pending
CI / setup (rp2040) (push) Waiting to run
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
* Now with even fewer ings * Ye * Mo * QMA6100PSensor |
||
|
Tom Fifield
|
276067065e
|
Log cleanups (#5135)
* Log cleanups change log levels, shorten log messages, delete commented out logs * Address comments from review * Remove full stops * EDEBUG --> DEBUG |
||
|
Thomas Göttgens
|
05e4a639a1
|
remove newline from logging statements. (#5022)
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben Meadors
|
411aedaf5d
|
Add health telemetry module (#4927)
* Add stub health telemetry module * Add detection for MAX30102 Health Sensor It lives on I2C bus at 0x57, which conflicts with an existing sensor. Add code to check the PARTID register for its response 0x15 per spec. * Add detection for MLX90614 An IR Temperature sensor suitable for livestock monitoring. * Add libraries for MLX90614 and MAX30102 sensors * Fix Trunk * Add support for MLX90614 IR Temperature Sensor * Add support for MAX30102 (Temperature) * Make it build - our first HealthTelemetry on the mesh. If a MAX30102 is connected, its temperature will be sent to the mesh as HealthTelemetry. * Add spo2 and heart rate calculations to MAX30102 * Switch MLX90614 to Adafruit library Sparkfun was having fun with SDA/SCL variables which we can avoid by switching to this highly similar library. * Enable HealthTelemetry if MLX90614 detected * Change MLX90614 emissivity for human skin. * Add health screen! * Remove autogenerated file from branch * Preparing for review * Fix MeshService master sync from before. * Prepare for review * For the americans * Fix native build * Fix for devices with no screen * Remove extra log causing issues --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> |
||
|
Ben Meadors
|
18f12584ab
|
Consolidate and shrink down the re-used strings in logs (#4907)
* Consolidate and shrink down the re-used strings in GPS * Condense all the things --------- Co-authored-by: GUVWAF <thijs@havinga.eu> |
||
|
David
|
40b3dbaa70
|
Add MAX17048 lipo fuel gauge (#4851)
* Initial commit * Update MAX17048Sensor.cpp * Update EnvironmentTelemetry.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben Meadors
|
e8829b8f52
|
Refactor and consolidate time window logic (#4826)
* Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> |
||
|
Tom Fifield
|
e9d55de3cb
|
Fix out-of-bound array access in T1000X Sensor (#4663)
if u8i == 135, then u8i++ runs, the loop exits since u8i == 136, then value for u8i is 136 after the for loop. then in the next line, ntc_res2[u8i] will read past the end of the array |
||
|
Thomas Göttgens
|
e543b61dd8 | trunk fmt | ||
|
David
|
eb1f80f520 | Fix build issue with mutex | ||
|
David
|
644e213b13 | Added a singleton wrapper for bmp3xx | ||
|
David
|
47e1580a62 | Integration test | ||
|
David
|
fc1e60ac58 | Initial upload | ||
|
Jonathan Bennett
|
48dc222b75
|
Merge branch 'master' into 2.5-changes | ||
|
Mictronics
|
6de3ca4301
|
Fix deprecated macros. (#4505)
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR #420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben Meadors
|
e61bd84116
|
Send local stats telemetry to phone every 15 minutes (#4475)
* Send local stats telemetry to phone every 10 minutes * Add debug log and bump to 15 minutes * Tronk * Explicit has_ optional |
||
|
geeksville
|
66c41e683d
|
bug #4184: fix config file loss due to filesystem write errors (#4397)
* Use SafeFile for atomic file writing (with xor checksum readback) * Write db.proto last because it could be the largest file on the FS (and less critical) * Don't keep a tmp file around while writing db.proto (because too big to fit two files in the filesystem) * generate a new critial fault if we encounter errors writing to flash either CriticalErrorCode_FLASH_CORRUPTION_RECOVERABLE or CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE (depending on if the second write attempt worked) * reformat the filesystem if we detect it is corrupted (then rewrite our config files) (only on nrf52 - not sure yet if we should bother on ESP32) * If we have to format the FS, make sure to preserve the oem.proto if it exists Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
dylanli
|
a000a8d347
|
Support Seeed Tracker-T1000-E (#4303)
* feature-T1000-E: add Added the board definition for T1000-E - integrate a script for rapid dependency download that is compatible with both Linux and Windows platforms. - add the pin definitions for UART, SPI, GPIO, and other peripherals have been ensured to be correct. - add the env configuration for PlatformIO. * refact-T1000-E: redefine T1000-E board * feature-T1000-E: add basic sensors * feature-T1000-E: add button init * feat: add DRADIOLIB_GODMODE defination for use function setDioAsRfSwitch to DIO LORA RF * feat : add gps(GNSS_Airoha) sleep mode * feat: add behavier when rec or send message * chore: hang IIC bus usage to avoid sensor address conflict * feat: add sensor data acquisition * feat : support Airoha GPS - add disable it in FSM - update lookForTime and lookForLocation function * fix: fix a bug * version: change version to 0.9.0 * Update tracker-t1000-e.json Remove a space * Delete variants/tracker-t1000-e/run_once.sh Delete not need as we will change platformio.ini * Update platformio.ini Update SoftDevice 7.3.0 usage in line with other lr1110 targets Do we need to keep GODMODE ? * fix: Button behavier incorrect bug * fix:remove some invaild code of TextMessageModule * fix: remove invaild comment * version: change version to 0.9.1 - update mark's patch - remove some invaild code and comments - fix button behavier * trunk format * fix: HELTEC_CAPSULE_SENSOR_V3 block got accidentally deleted * fix: EnvironmentTelemetry upstream merge went awry. * fix: Added macro definitions to ensure correct operation of LORA section * fix :GNSS_AIROHA macro defination in line with others * fix: upstream backmerge accidentally. * fix: wrap macro PIN_3V3_EN BUZZER_EN_PIN GNSS_AIROHA in the TRACKER_T1000_E macro guard --------- Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> |
||
|
Thomas Göttgens
|
94a10e011c
|
Merge branch 'master' into wio-lr1110-refresh | ||
|
Thomas Göttgens
|
bdd1c53072 |
Revert "Sync Wio lr1110 refresh with master (#4288)"
This reverts commit |
||
|
Tom Fifield
|
5cc8ca59a3
|
Sync Wio lr1110 refresh with master (#4288)
* Fix protobuf structs handling (#4140) * Fix protobuf structs handling * Log instead of assert --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * BLE based logging (#4146) * WIP log characteristic * Bluetooth logging plumbing * Characteristic * Callback * Check for nullptr * Esp32 bluetooth impl * Formatting * Add thread name and log level * Add settings guard * Remove comments * Field name * Fixes esp32 * Open it up * Whoops * Move va_end past our logic * Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151) * Standardize lat/lon position logs (#4156) * Standardize lat/lon position logs * Missed sone and condensed logs * [create-pull-request] automated change (#4157) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Pause BLE logging during want_config flow (#4162) * Update NimBLE to 1.4.2 (#4163) * Implement replies for all telemetry types based on variant tag (#4164) * Implement replies for all telemetry types based on variant tag * Remove check for `ignoreRequest`: modules can set this, don't need to check --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Esptool is better * Explicitly set characteristic * fix INA3221 sensor (#4168) - pass wire to begin() - remove redundant setAddr() (already set in header) * Show compass on waypoint frame; clear when waypoint deleted (#4116) * Clear expired or deleted waypoint frame * Return 0 to CallbackObserver * Add a missing comment * Draw compass for waypoint frame * Display our own waypoints * [create-pull-request] automated change (#4171) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add semihosting support for nrf52 devices (#4137) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * fix my botched merge - keep board_level = extra flag for rak3631_dbg --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4174) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Display alerts (#4170) * Move static functions into Screen.h, show compass during calibration * Move to _fontHeight macro to avoid collision * Move some alert functions to new alert handler * Catch missed reboot code * ESP32 fixes * Bump esp8266-oled-ssd1306 * Fixes for when a device has no screen * Use new startAlert(char*) helper class * Add EINK bits back to alert handling * Add noop class for no-display devices --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Send file system manifest up on want_config (#4176) * Send file system manifest up on want_config * Platform specific methods * Helps to actually make the change * Clear * tell vscode, if formatting, use whatever our trunk formatter wants (#4186) without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * fix the build - would loop forever if there were no files to send (#4188) * Show owner.short_name on boot (and E-Ink sleep screen) (#4134) * Show owner.short_name on boot and sleep screen (on e-ink) * Update Screen.cpp - new line for short_name Boot screen short_name now below the region setting. Looks better on small screens. * Draw short_name on right --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * nrf52 soft device will watchdog if you use ICE while BT on... (#4189) so have debugger disable bluetooth. * correct xiao_ble build preventing sx1262 init (#4191) * Force a compile time failur if FromRadio or ToRadio get larger than (#4190) a BLE packet size. We are actually very close to this threshold so important to make sure we don't accidentally pass it. * Clear vector after complete config state (#4194) * Clear after complete config * Don't collect . entries * Log file name and size * [create-pull-request] automated change (#4200) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Make the logs Colorful! (#4199) * Squash needlessly static functions (#4183) * Trim extra vprintf and filter for unprintable characters * Deprecate Router Client role (and make it Client) (#4201) * [create-pull-request] automated change (#4205) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Move waypoint (#4202) * Move waypoint screen draw into the waypoint module * Get the observer set up for the waypoint screen draw * Static squashing: screen dimensions Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class. * Move getCompassDiam into Screen class (supress compiler warnings) At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance. This is probably just another band-aid until these static functions all move. * Use new getCompassDiam function in AccelerometerThread * Properly gate display code in WaypointModule --------- Co-authored-by: Todd Herbert <herbert.todd@gmail.com> * Fix flakey phone api transition from file manifest to complete (#4209) * Try fix flakey phone api transition from file manifest to complete * Skip * enable colors in platformio serial monitor (#4217) * When talking via serial, encapsulate log messages in protobufs if necessary (#4187) * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4218) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix SHT41 support (#4222) * Add SHT41 Serial to I2c Detection Code On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being incorrectly detected as SHT31. This patch adds the necessary serial number for the SHT41 chip to be correctly detected. fixes meshtastic/firmware#4221 * Add missing sensor read for SHT41 * Typo fix in logs - mhz - MHz (#4225) As reported by karamo, a few different places in our logs had incorrect capitalization of MHz. fixes meshtastic/firmware#4126 * New new BLE logging characteristic with LogRecord protos (#4220) * New UUID * New log radio characteristic with LogRecord protobuf * LogRecord * Merge derp * How did you get there * Trunk * Fix length * Remove assert * minor cleanup proposal (#4169) * MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup... Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside configuration.h * cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET We already had HAS_NETWORKING as flag in MQTT to mean 'we have tcpip'. Generallize that and move it into configuration.h so that we can use it elsewhere. * Use #pragma once, because supported by gcc and all modern compilers instead of #ifdef DOTHFILE_H etc... --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add PowerMon support (#4155) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 ) * oops - mean't to mark the _dbg variant as an 'extra' board. * powermon wip * Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB * Instrument (radiolib only for now) lora for powermon per https://github.com/meshtastic/firmware/issues/4136 * powermon gps support https://github.com/meshtastic/firmware/issues/4136 * Add CPU deep and light sleep powermon states https://github.com/meshtastic/firmware/issues/4136 * Change the board/swversion bootstring so it is a new "structured" log msg. * powermon wip * add example script for getting esp S3 debugging working Not yet used but I didn't want these nasty tricks to get lost yet. * Add PowerMon reporting for screen and bluetooth pwr. * make power.powermon_enables config setting work. * update to latest protobufs * fix bogus shellcheck warning * make powermon optional (but default enabled because tiny and no runtime impact) * tell vscode, if formatting, use whatever our trunk formatter wants without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * add PowerStress module * nrf52 arduino is built upon freertos, so let platformio debug it * don't accidentally try to Segger ICE if we are using another ICE * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs * update to latest protobufs (needed for powermon goo) * PowerStress WIP * fix linter warning * Cleanup buffer * Merge hex for wm1110 target(s) * Only sdk * Sudo * Fix exclude macros (#4233) * fix MESHTASTIC_EXCLUDE_BLUETOOTH * fix HAS_SCREEN=0 * fix MESHTASTIC_EXCLUDE_GPS * fix typo in build-nrf52.sh (#4231) chmod is the command, '+x' is the argument. * Tidy Wireless Paper variant files (#4238) * Quick tidy of pins_arduino.h Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480) * Tidy variant.h * Change deprecated ADC attenuation parameter From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12` * Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243) * Fix BLE logging on nrf52 (#4244) * allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types This allows 'lossless' log reading. If client has requested INDICATE (rather than NOTIFY) each log record emitted via log() will have to fetched by the client device before the meshtastic node can continue. * Fix serious problem with nrf52 BLE logging. When doing notifies of LogRecords it is important to use the binary write routines - writing using the 'string' write won't work. Because protobufs can contain \0 nuls inside of them which if being parsed as a string will cause only a portion of the protobuf to be sent. I noticed this because some log messages were not getting through. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Fix build when HAS_NETWORKING is false on nrf52 (#4237) (tested on a rak4631 by setting HAS_ETHERNET false when shrinking image) * If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246) * Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248) * Update variant.h * Update wio-tracker-wm1110.json * Update wio-sdk-wm1110.json * Update platformio.ini * Update platformio.ini * Add files via upload * Add files via upload * Update variant.h * Cleanup NRF s140 Softdevice variants (#4252) Note: This idea is originally from @caveman99 and should be credited as such. Submitting as a separate PR so the work in meshtastic/firmware#4148 can be a bit cleaner and Seeed boards can build while that work is ongoing. The nrf52 boards that depend on the v7 softdevice all use the same code and linker files. Rather than duplicate the code, keep it all together with the platform. * Remove tracker variant specific soft device headers (#4255) * [create-pull-request] automated change (#4247) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add wio-sdk-wm1110 to build. (#4258) The wio-sdk-wm1110 is distinct from the wio-tracker-wm1110, with different platformio build options and pin config. This change adds the wio-sdk-wm1110 to the CI matrix so firmware is built as part of release. * fix python warning in uf2conf (#4235) the old regex worked but was technically incorrect. fixes: Generating NRF52 uf2 file /home/kevinh/development/meshtastic/firmware/bin/uf2conv.py:195: SyntaxWarning: invalid escape sequence '\s' words = re.split('\s+', line) Converting to uf2, output size: 1458688, start address: 0x26000 * Collect hex files and specifically wm1110 sdk * Skip dfu file for sdk (for now) * Helps if you remove the original clause * Add Heltec new boards. (#4226) * Add Heltec new boards * Update variant.h disable RTC by default * Add Heltec New boards * Add Heltec new boards * Update Heltec Mesh Node definition. * Update Heltec Vision Mater E290 * [create-pull-request] automated change (#4259) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Trunk fmt * Fix macros * Move e290 to board level extra while CI is broken * Tell trunk to ignore bin folder * Fix missing * Update trunk.yaml, fix whitespace * Update trunk.yaml * Update build_raspbian_armv7l.yml --fix-missing * [create-pull-request] automated change (#4263) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * GPS Power State tidy-up (#4161) * Refactor GPSPowerState enum Identifies a case where the GPS hardware is awake, but an update is not yet desired * Change terminology * Clear old lock-time prediction on triple press * Use exponential smoothing to predict lock time * Rename averageLockTime to predictedLockTime * Attempt: Send PMREQ with duration 0 on MCU deep-sleep * Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep * Revert "Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep" This reverts commit |
||
|
Warren Guy
|
974fc31856
|
INA3221 sensor: use for bus voltage & environment metrics (#4215)
* use INA3221 for bus voltage; fixes for telemetry variants - add to sensors available for environment telemetry (to report voltage/current) - add vars to define channels to use for battery voltage (for getBusVoltage) and environment metrics (default to CH1 for both) - write to the correct fields on the measurement struct depending on the measurement variant, and DRY up the sensor measurement collection code a bit - this might be suitable for a common implementation for the INA* sensors in a future PR... * formatting * derp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Tom Fifield
|
d97e6b86b8
|
Sync Wio lr1110 refresh with master (#4251)
* Fix protobuf structs handling (#4140) * Fix protobuf structs handling * Log instead of assert --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * BLE based logging (#4146) * WIP log characteristic * Bluetooth logging plumbing * Characteristic * Callback * Check for nullptr * Esp32 bluetooth impl * Formatting * Add thread name and log level * Add settings guard * Remove comments * Field name * Fixes esp32 * Open it up * Whoops * Move va_end past our logic * Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151) * Standardize lat/lon position logs (#4156) * Standardize lat/lon position logs * Missed sone and condensed logs * [create-pull-request] automated change (#4157) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Pause BLE logging during want_config flow (#4162) * Update NimBLE to 1.4.2 (#4163) * Implement replies for all telemetry types based on variant tag (#4164) * Implement replies for all telemetry types based on variant tag * Remove check for `ignoreRequest`: modules can set this, don't need to check --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Esptool is better * Explicitly set characteristic * fix INA3221 sensor (#4168) - pass wire to begin() - remove redundant setAddr() (already set in header) * Show compass on waypoint frame; clear when waypoint deleted (#4116) * Clear expired or deleted waypoint frame * Return 0 to CallbackObserver * Add a missing comment * Draw compass for waypoint frame * Display our own waypoints * [create-pull-request] automated change (#4171) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add semihosting support for nrf52 devices (#4137) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * fix my botched merge - keep board_level = extra flag for rak3631_dbg --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4174) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Display alerts (#4170) * Move static functions into Screen.h, show compass during calibration * Move to _fontHeight macro to avoid collision * Move some alert functions to new alert handler * Catch missed reboot code * ESP32 fixes * Bump esp8266-oled-ssd1306 * Fixes for when a device has no screen * Use new startAlert(char*) helper class * Add EINK bits back to alert handling * Add noop class for no-display devices --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Send file system manifest up on want_config (#4176) * Send file system manifest up on want_config * Platform specific methods * Helps to actually make the change * Clear * tell vscode, if formatting, use whatever our trunk formatter wants (#4186) without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * fix the build - would loop forever if there were no files to send (#4188) * Show owner.short_name on boot (and E-Ink sleep screen) (#4134) * Show owner.short_name on boot and sleep screen (on e-ink) * Update Screen.cpp - new line for short_name Boot screen short_name now below the region setting. Looks better on small screens. * Draw short_name on right --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * nrf52 soft device will watchdog if you use ICE while BT on... (#4189) so have debugger disable bluetooth. * correct xiao_ble build preventing sx1262 init (#4191) * Force a compile time failur if FromRadio or ToRadio get larger than (#4190) a BLE packet size. We are actually very close to this threshold so important to make sure we don't accidentally pass it. * Clear vector after complete config state (#4194) * Clear after complete config * Don't collect . entries * Log file name and size * [create-pull-request] automated change (#4200) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Make the logs Colorful! (#4199) * Squash needlessly static functions (#4183) * Trim extra vprintf and filter for unprintable characters * Deprecate Router Client role (and make it Client) (#4201) * [create-pull-request] automated change (#4205) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Move waypoint (#4202) * Move waypoint screen draw into the waypoint module * Get the observer set up for the waypoint screen draw * Static squashing: screen dimensions Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class. * Move getCompassDiam into Screen class (supress compiler warnings) At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance. This is probably just another band-aid until these static functions all move. * Use new getCompassDiam function in AccelerometerThread * Properly gate display code in WaypointModule --------- Co-authored-by: Todd Herbert <herbert.todd@gmail.com> * Fix flakey phone api transition from file manifest to complete (#4209) * Try fix flakey phone api transition from file manifest to complete * Skip * enable colors in platformio serial monitor (#4217) * When talking via serial, encapsulate log messages in protobufs if necessary (#4187) * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4218) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix SHT41 support (#4222) * Add SHT41 Serial to I2c Detection Code On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being incorrectly detected as SHT31. This patch adds the necessary serial number for the SHT41 chip to be correctly detected. fixes meshtastic/firmware#4221 * Add missing sensor read for SHT41 * Typo fix in logs - mhz - MHz (#4225) As reported by karamo, a few different places in our logs had incorrect capitalization of MHz. fixes meshtastic/firmware#4126 * New new BLE logging characteristic with LogRecord protos (#4220) * New UUID * New log radio characteristic with LogRecord protobuf * LogRecord * Merge derp * How did you get there * Trunk * Fix length * Remove assert * minor cleanup proposal (#4169) * MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup... Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside configuration.h * cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET We already had HAS_NETWORKING as flag in MQTT to mean 'we have tcpip'. Generallize that and move it into configuration.h so that we can use it elsewhere. * Use #pragma once, because supported by gcc and all modern compilers instead of #ifdef DOTHFILE_H etc... --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add PowerMon support (#4155) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 ) * oops - mean't to mark the _dbg variant as an 'extra' board. * powermon wip * Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB * Instrument (radiolib only for now) lora for powermon per https://github.com/meshtastic/firmware/issues/4136 * powermon gps support https://github.com/meshtastic/firmware/issues/4136 * Add CPU deep and light sleep powermon states https://github.com/meshtastic/firmware/issues/4136 * Change the board/swversion bootstring so it is a new "structured" log msg. * powermon wip * add example script for getting esp S3 debugging working Not yet used but I didn't want these nasty tricks to get lost yet. * Add PowerMon reporting for screen and bluetooth pwr. * make power.powermon_enables config setting work. * update to latest protobufs * fix bogus shellcheck warning * make powermon optional (but default enabled because tiny and no runtime impact) * tell vscode, if formatting, use whatever our trunk formatter wants without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * add PowerStress module * nrf52 arduino is built upon freertos, so let platformio debug it * don't accidentally try to Segger ICE if we are using another ICE * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs * update to latest protobufs (needed for powermon goo) * PowerStress WIP * fix linter warning * Cleanup buffer * Merge hex for wm1110 target(s) * Only sdk * Sudo * Fix exclude macros (#4233) * fix MESHTASTIC_EXCLUDE_BLUETOOTH * fix HAS_SCREEN=0 * fix MESHTASTIC_EXCLUDE_GPS * fix typo in build-nrf52.sh (#4231) chmod is the command, '+x' is the argument. * Tidy Wireless Paper variant files (#4238) * Quick tidy of pins_arduino.h Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480) * Tidy variant.h * Change deprecated ADC attenuation parameter From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12` * Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243) * Fix BLE logging on nrf52 (#4244) * allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types This allows 'lossless' log reading. If client has requested INDICATE (rather than NOTIFY) each log record emitted via log() will have to fetched by the client device before the meshtastic node can continue. * Fix serious problem with nrf52 BLE logging. When doing notifies of LogRecords it is important to use the binary write routines - writing using the 'string' write won't work. Because protobufs can contain \0 nuls inside of them which if being parsed as a string will cause only a portion of the protobuf to be sent. I noticed this because some log messages were not getting through. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Fix build when HAS_NETWORKING is false on nrf52 (#4237) (tested on a rak4631 by setting HAS_ETHERNET false when shrinking image) * If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246) * Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248) * Update variant.h * Update wio-tracker-wm1110.json * Update wio-sdk-wm1110.json * Update platformio.ini * Update platformio.ini * Add files via upload * Add files via upload * Update variant.h --------- Co-authored-by: Mike <mikhael.skvortsov@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Mike G <mkgin@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Warren Guy <5602790+warrenguy@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: geeksville <kevinh@geeksville.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Alexander <156134901+Dorn8010@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: quimnut <github@dopegoat.com> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Agent Blu, 006 <blu006@ucr.edu> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> |