* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 )
* oops - mean't to mark the _dbg variant as an 'extra' board.
* powermon wip
* Make serial port on wio-sdk-wm1110 board work
By disabling the (inaccessible) adafruit USB
* Instrument (radiolib only for now) lora for powermon
per https://github.com/meshtastic/firmware/issues/4136
* powermon gps support
https://github.com/meshtastic/firmware/issues/4136
* Add CPU deep and light sleep powermon states
https://github.com/meshtastic/firmware/issues/4136
* Change the board/swversion bootstring so it is a new "structured" log msg.
* powermon wip
* add example script for getting esp S3 debugging working
Not yet used but I didn't want these nasty tricks to get lost yet.
* Add PowerMon reporting for screen and bluetooth pwr.
* make power.powermon_enables config setting work.
* update to latest protobufs
* fix bogus shellcheck warning
* make powermon optional (but default enabled because tiny and no runtime impact)
* tell vscode, if formatting, use whatever our trunk formatter wants
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)
Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs. I guess I'll start letting that happen with
my future commits ;-).
* add PowerStress module
* nrf52 arduino is built upon freertos, so let platformio debug it
* don't accidentally try to Segger ICE if we are using another ICE
* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.
* remove NoopPrint - it is no longer needed
* when talking to API clients via serial, don't turn off log msgs instead encapsuate them
* fix the build - would loop forever if there were no files to send
* don't use Segger code if not talking to a Segger debugger
* when encapsulating logs, make sure the strings always has nul terminators
* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.
* Important to not print debug messages while writing to the toPhone scratch buffer
* don't include newlines if encapsulating log records as protobufs
* update to latest protobufs (needed for powermon goo)
* PowerStress WIP
* fix linter warning
* MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup...
Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI
flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI
to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside
configuration.h
* cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET
We already had HAS_NETWORKING as flag in MQTT to mean 'we have
tcpip'. Generallize that and move it into configuration.h so that
we can use it elsewhere.
* Use #pragma once, because supported by gcc and all modern compilers
instead of #ifdef DOTHFILE_H etc...
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add SHT41 Serial to I2c Detection Code
On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being
incorrectly detected as SHT31.
This patch adds the necessary serial number for the SHT41 chip to
be correctly detected.
fixesmeshtastic/firmware#4221
* Add missing sensor read for SHT41
* Move waypoint screen draw into the waypoint module
* Get the observer set up for the waypoint screen draw
* Static squashing: screen dimensions
Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class.
* Move getCompassDiam into Screen class
(supress compiler warnings)
At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance.
This is probably just another band-aid until these static functions all move.
* Use new getCompassDiam function in AccelerometerThread
* Properly gate display code in WaypointModule
---------
Co-authored-by: Todd Herbert <herbert.todd@gmail.com>
* Move static functions into Screen.h, show compass during calibration
* Move to _fontHeight macro to avoid collision
* Move some alert functions to new alert handler
* Catch missed reboot code
* ESP32 fixes
* Bump esp8266-oled-ssd1306
* Fixes for when a device has no screen
* Use new startAlert(char*) helper class
* Add EINK bits back to alert handling
* Add noop class for no-display devices
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Implement replies for all telemetry types based on variant tag
* Remove check for `ignoreRequest`: modules can set this, don't need to check
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* DropzoneModule hello world
* Buttoning things up
* Exclude by default
* Upstream refs
* Cleanup
* Add modules folder to path
* Case and path matters
* Exclude from header
* Guard
* Don't reboot for certain config prefs and make accelerometer thread re-entrant
* WHOOPS
* Don't reboot for LED heartbeat and button press
* Remove TZ
* Updated kbI2cBase.cpp
Updated keyboard settings for t-deck to allow a modifier key to trigger 'tab', mute notifications, or quit. To trigger the modifier press the shift key and mic (0) button at the same time. Then press q (quit), m (mute), or t (tab).
* Update kbI2cBase.cpp
* fixed formatting issues in kbI2cBase.cpp
* Removed keyboard shortcut code that doesnt work
alt+t does not work on a t-deck so I removed it to avoid confusion.
* Updated kbI2cBase.cpp
Updated keyboard settings for t-deck to allow a modifier key to trigger 'tab', mute notifications, or quit. To trigger the modifier press the shift key and mic (0) button at the same time. Then press q (quit), m (mute), or t (tab).
* Update kbI2cBase.cpp
* fixed formatting issues in kbI2cBase.cpp
* Removed keyboard shortcut code that doesnt work
alt+t does not work on a t-deck so I removed it to avoid confusion.
* Changed modifier key to alt+c
* Added screen brightness functionality
Use modifier key with o(+) to increase brightness or i(-) to decrease.
Currently there are 4 levels of brightness, (L, ML, MH, H). I would like to add a popup message to tell you the brightness.
* Added checks to disable screen brightness changes on unsupported hardware
* Setting the brightness code to work on only applicable devices
* Added "function symbol" display to bottom right corner of screen. Now shows when mute is active or modifier key is pressed. Also fixed some other minor issues.
* commented out a log
* Reworked how modifier functions worked, added
I wasn’t happy with my previous implementation, and I think it would have caused issues with other devices. This should work on all devices.
* Added back the function I moved causing issue with versions
* Fixed the version conflicts, everything seems to work fine now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* AdminModule: Publish fixed position updates
Enabled GPS thread when fixed position is updated, to let the GPS thread run once and publish the new fixed position.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* GPS: Consider changes in only altitude as an updated point
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
This enables the node and channel selection to be accessed by pressing the tab shortcut and then swiping between nodes or pressing tab again to change channels.
(To access the tab function look at my other pull request https://github.com/meshtastic/firmware/pull/3668)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* NeighborInfo: Only keep neighbors in RAM
It fills up quickly when nodes are running >=2.3
* Defer first transmission as it's usually empty
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* - map fn+m to mute and unmute the external notification module
- map fn+t to be an alternative for the TAB key
* add whitelist to inputbroker
* (maybe) sweet-talking t-deck into tabbing...
* now for real - back in Kansas
* More fancy mappings
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Don't save Neighbors to flash when receiving
* Move `shouldSave` to `saveProtoForModule()`
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Use `alterReceivedProtobuf()` for NeighborInfo and Traceroute
`alterReceived()` should never return NULL
Traceroute should be promiscuous
* Remove extensive logging from NeighborInfo module
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* (3/3) Add variant for pico with waveshare and GPS hat, utilizing slow clock.
* Not everybody has Serial2
* Trunk
* Push it real gud
* No init
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Set `hop_start` in header to determine how many hops each packet traveled
* Set hopLimit of response according to hops used by request
* Identify neighbors based on `hopStart` and `hopLimit`
* NeighborInfo: get all packets and assume a default broadcast interval
* Add fail-safe in case node in between is running modified firmware
* Add `viaMQTT` and `hopsAway` to NodeInfo
* Replace `HOP_RELIABLE` with hopStart for repeated packet
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add UI frame to display PaxCounter module data
* only acquire screen when paxcounter is active, i.e. enabled and wifi and ble are both off
* sync font #define with other occurrences in code
* protect screen specific code with #if HAS_SCREEN
* limit upload_speed to 115200 for TLORA_V2_1_16
* fix failing trunk checks; sorry
* Revert "limit upload_speed to 115200 for TLORA_V2_1_16"
This reverts commit 4eb549c5e8.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* StoreForward updates
- Send history in "text" variant
- Don't send history the client already got
- Check if PSRAM is full
- More sensible defaults
* Set `TEXT_BROADCAST` or `TEXT_DIRECT` RequestResponse tag
* feat: E-Ink "Dynamic Partial" (#3193)
Use a mixture of full refresh, partial refresh, and skipped updates, balancing urgency and display health.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* [create-pull-request] automated change (#3209)
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
* Reset `last_index` if history was cleared, e.g. by reboot
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
Co-authored-by: Garth Vander Houwen <garthvh@yahoo.com>
* compiling w/o e-ink display
* pinout changes
* progress getting LoRa and LCD working
* fix for bootloader, gps pins
* add canary to build matrix
* merge with main
* fix build by excluding BellModem in RadioLib
* fixes for GPS
* Fix LED_BLUE and GPS RX/TX pins
* Variant changes for merge
* make GPS baud rate configurable
* fix debug config
* Canary v1.2 changes
* Fixes for GPS
* pass trunk check
* bump protobufs to master
* update build flags to use CANARYONE enum
* use canaryone throughout for consistency.
* #define 0 is still defined
* add back .vscode/extensions.json
* bump protobufs
* revert manual change to generated file
---------
Co-authored-by: Steven Osborn <steven@lolsborn.com>
* Mark packets received via MQTT and add option to ignore them
* Don't send packets received via MQTT back into MQTT
Generate implicit ACK for packets we as an MQTT gateway sent
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Move to Portduino's getMacAddr()
* Add ST7735/S screen support
* Push Raspbian support into native target
* Remove latent pigpio references.
* CardKB defensive programming
* Adds configurable spidev
* Fixes to build on Fedora 40
* ENUMs are not #defines. Pull latest portduino
* Add more configuration options for SPI displays
* Add config.yaml option to set DIO3_TCXO_VOLTAGE
* change tft clear() to fillScreen()
Maintains compatability with ESPI driver.
* Adds TXen and RXen pins to portduino
* Add -c --config options to specify config file
* Fail when a specified config file is unavailable
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* WIP
* ESP8266 SAM fun
* I2S audio / ext. notification module
* Remove
* Protos
* Add use_i2s_as_buzzer from protos
* Fixes
* Stuff
* Thing
* Ext. Notification working(ish)
* Remove SAM commented code
* Trunk upgrade
* Trunk
* Fixes
* Slow not fast... :-|
* T-Deck and T-Watch don't use normal buttons
* Stop ext. notification nagging with touchscreen as well
* Add button gpio back for T-Deck, but guard against long-press during ext. notification
* Ext. notification wrap up
* Better place to guard against long-press false positives
* Adjust default gain and guard against non-i2s devices referencing audio-thread
* Simplify guard logic with a boolean
* Supress uninitMemberVar
* Protos merge got out of wack
* Trunk resolution
* Remove extra crap
* Cleanup and thread-interval
* Default to alert message buzzer and add nag timeout
* Formatting
- only works if we don't have a phone connected, but that is probably dsired
- this will send a copy of device-originating text messgaes to a connected phone. Breaking change.
- this will iterate the tophone queue by deconstructing and reconstructing it every time we look for an ID. Probably also mangles the queue oder since it aborts when a ID is found.
- Can we navigate the packet pool instead? If so, how?
- Let's keep this in draft state for now
* Pico W: Initial WiFi support: connects, but freezes after a while
* Update arduino-pico core to fix hang with Wi-Fi
* Add `picow` to workflow since it's different from `pico` now
