* Make SPI frequency configurable on Native
* Make the tophone queue size configurable for Portduino
* The modified SPISettings must be configured in setup(), after config.yaml is processed
* make MeshService a pointer, so we can configure MAX_RX_TOPHONE at run time
* Got a little over excited with refactoring
* Silence a warning
* More compatible
Changed a RADIOMASTER_900_BANDIT_NANO to DISPLAY_FLIP_SCREEN that is responsible for flipping the OLED screen for better compatible with other devices.
* Update variant.h Radiomaster
Remove a un-used SCREEN_ROTATE and added DISPLAY_FLIP_SCREEN
* Adding support for Chatter keypad
* Remove user button mapping since full keypad is now useable
* Adding TAB key and RIGHT to allow selecting a destination
* Fix shift bug (there's only three levels, not four)
* reformat file
* Fix bug with fast repeated keypresses
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Cleanup - remove unused defines.
There were a number of defined variables that were carried over
from old code. - Removed.
Also a typo. - Fixed fix.
Also duplicate definitions of the number of seconds in a day.
-deduplicated.
* Cleanup - remove unused defines.
There were a number of defined variables that were carried over
from old code. - Removed.
Also a typo. - Fixed fix.
Also duplicate definitions of the number of seconds in a day.
-deduplicated.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
It turns out that the Air530z is a GNSS_MODEL_MTK. Our existing
code detects and configures it properly. This patch removes a
couple of AIROHA ifdefs since they are not required for a
working GPS.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Event mode: Enforce reliable hop limit
* Event mode: Short circuit wantsLink on MQTT for default broker address
* Just enforce at channels level since everything uses this
* For events never forward packets with excessive hop_limit
* In EVENT_MODE, don't respond with hop_limit set more then the configured max.
* Correct hop_start when correcting hop_limit in event mode.
* Make EVENT_MODE work from userPrefs.h
* Event mode: Disallow Router or Repeater roles
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Macro to trace log all MeshPackets as JSON
* Comment
* Add trace logging to file for native target
* bytes to hex
* Add time_ms
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* add a userPrefs.h file, default blank, which can be used to easily set defaults on custom builds.
* Add Splash Screen to userPrefs
* Add channel 0 defaults to userPrefs.h
* CONFIG_LORA_IGNORE_MQTT_DEFAULT
* Unify naming for USERPREFS defines
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add the UF2 conversion script to the p.io task menu
Update platformio-custom.py to include the UF2 conversion script as a project task. Saves you dropping into the command line every time.
Tested on Windows only...
* Forgot the build target...
* Make STM compile again and update toolchain. The binary is too big for the flash. WIP
* Making progress with OSFS, still WIP
* more progress, still too big. Adding RAK3172 to the equasion
* Make STM compile again and update toolchain. The binary is too big for the flash. WIP
* Making progress with OSFS, still WIP
* more progress, still too big. Adding RAK3172 to the equasion
* still too big
* minimize build
* trunk fmt
* fix a couple of symbol clashes
* trunk fmt
* down to 101% with a release vs. debug build and omitting the flash strings
* fix compilation
* fix compilation once more
* update protobufs linkage
* - Toolchain updated
- Fixed macro error
* silence compiler warning
note: do something about this assert...
* new toolkit and fix Power.cpp
* STM32WL make it fit (#4330)
* Add option to exclude I2C parts
The I2C hals and related code uses a significant amount of flash space and aren't required for a basic node.
* Add option to disable Admin and NodeInfo modules
Disabled by default in minimal build. This saves a significant amount of flash
* Disable unused hals
These use up significant flash
* Add float support for printf for debugging
Makes serial look nice for debugging
* This breaks my build for some reason
* These build flags can save a bit of flash
* Don't disable NodeInfo and Admin modules in minimal build
They fit in flash
* Don't include printf float support by default
Only useful for debugging
---------
Co-authored-by: Adam Lawson <dev@goshawk22.uk>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Adam Lawson <dev@goshawk22.uk>
* feature-T1000-E: add Added the board definition for T1000-E
- integrate a script for rapid dependency download that is compatible with both Linux and Windows platforms.
- add the pin definitions for UART, SPI, GPIO, and other peripherals have been ensured to be correct.
- add the env configuration for PlatformIO.
* refact-T1000-E: redefine T1000-E board
* feature-T1000-E: add basic sensors
* feature-T1000-E: add button init
* feat: add DRADIOLIB_GODMODE defination for use function setDioAsRfSwitch to DIO LORA RF
* feat : add gps(GNSS_Airoha) sleep mode
* feat: add behavier when rec or send message
* chore: hang IIC bus usage to avoid sensor address conflict
* feat: add sensor data acquisition
* feat : support Airoha GPS
- add disable it in FSM
- update lookForTime and lookForLocation function
* fix: fix a bug
* version: change version to 0.9.0
* Update tracker-t1000-e.json
Remove a space
* Delete variants/tracker-t1000-e/run_once.sh
Delete not need as we will change platformio.ini
* Update platformio.ini
Update SoftDevice 7.3.0 usage in line with other lr1110 targets
Do we need to keep GODMODE ?
* fix: Button behavier incorrect bug
* fix:remove some invaild code of TextMessageModule
* fix: remove invaild comment
* version: change version to 0.9.1
- update mark's patch
- remove some invaild code and comments
- fix button behavier
* trunk format
* fix: HELTEC_CAPSULE_SENSOR_V3 block got accidentally deleted
* fix: EnvironmentTelemetry upstream merge went awry.
* fix: Added macro definitions to ensure correct operation of LORA section
* fix :GNSS_AIROHA macro defination in line with others
* fix: upstream backmerge accidentally.
* fix: wrap macro PIN_3V3_EN BUZZER_EN_PIN GNSS_AIROHA in the TRACKER_T1000_E macro guard
---------
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Make sure to call randomSeed() on esp32
* Randomize the top 22 bits of the Message ID
* Make it clear that we are not calling randomSeed() on purpose
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Cleanup GPS, add UC6580 autodetect
Our GPS code autodetects devices by default. Previously UC6580 was
statically assigned, and had its own baudrate configuration inside
the GPS code.
This change adds autodetect functionality for the UC6580 and moves
any 'special' GPS baud rate requirements for a variant out into the
variant configuration. Thereby cleaning up core GPS code a little,
saving the whales, and curing global warming.
New Functionality:
* If GPS_BAUDRATE is defined in variant.h, GPS autodetection will
try that baudrate first.
* UC6580 GPS chips are now automatically detected
* Only run speedSelect skip the first time
* Cleanup GPS, add UC6580 autodetect
Our GPS code autodetects devices by default. Previously UC6580 was
statically assigned, and had its own baudrate configuration inside
the GPS code.
This change adds autodetect functionality for the UC6580 and moves
any 'special' GPS baud rate requirements for a variant out into the
variant configuration. Thereby cleaning up core GPS code a little,
saving the whales, and curing global warming.
New Functionality:
* If GPS_BAUDRATE is defined in variant.h, GPS autodetection will
try that baudrate first.
* UC6580 GPS chips are now automatically detected
* Cleanup GPS, add UC6580 autodetect
Our GPS code autodetects devices by default. Previously UC6580 was
statically assigned, and had its own baudrate configuration inside
the GPS code.
This change adds autodetect functionality for the UC6580 and moves
any 'special' GPS baud rate requirements for a variant out into the
variant configuration. Thereby cleaning up core GPS code a little,
saving the whales, and curing global warming.
New Functionality:
* If GPS_BAUDRATE is defined in variant.h, GPS autodetection will
try that baudrate first.
* UC6580 GPS chips are now automatically detected
* Remove Airoha baud rate code
It's no longer needed.
