* Add support for Adafruit Feather RP2040 with RFM95.
* Update mesh.pb.h
dropping this change from the file generated by the protobuf
* Update mesh.pb.h
remove these reverting changes
* Update mesh.pb.h
oops, missed a comma
(from src/extra_variants/README.md)
This directory tree is designed to solve two problems.
- The ESP32 arduino/platformio project doesn't support the nice "if initVariant() is found, call that after init" behavior of the nrf52 builds (they use initVariant() internally).
- Over the years a lot of 'board specific' init code has been added to init() in main.cpp. It would be great to have a general/clean mechanism to allow developers to specify board specific/unique code in a clean fashion without mucking in main.
So we are borrowing the initVariant() ideas here (by using weak gcc references). You can now define lateInitVariant() if your board needs it.
If you'd like a board specific variant to be run, add the variant.cpp file to an appropriately named
subdirectory and check for \_VARIANT_boardname in the cpp file (so that your code is only built for your board).
You'll need to define \_VARIANT_boardname in your corresponding variant.h file.
See existing boards for examples.
This approach has no added runtime cost.
* Initial support for RadioMaster Bandit.
* Different lighting can be made for Button 1 & 2 on the Bandit.
Changes to AmbientLighting will turn off af shutdown().
* Trunk
* Trunk again.
* Add support for Adafruit Feather RP2040 with RFM95.
* Update mesh.pb.h
dropping this change from the file generated by the protobuf
* Update mesh.pb.h
remove these reverting changes
* Update mesh.pb.h
oops, missed a comma
* Initial support for RadioMaster Bandit.
* Different lighting can be made for Button 1 & 2 on the Bandit.
Changes to AmbientLighting will turn off af shutdown().
* Trunk
* Trunk again.
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28
* Merge PR #420
* Fixed double and missing Default class.
* Use correct format specifier and fixed typo.
* Removed duplicate code.
* Fix error: #if with no expression
* Fix warning: extra tokens at end of #endif directive.
* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.
* Fix deprecated macros.
* Set RP2040 in dormant mode when deep sleep is triggered.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Adds ASCII logs useful to portudino
Activates ASCII log option when stdout is not a terminal. This is
generally the right thing to do; if not, the behavior can be
overridden in config.yaml using AsciiLogs under Logging. The result
is reasonable system logs for portudino when running under systemd or
the like.
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
Co-authored-by: Christopher Hoover <ch@murgatroid.com>
* Adds ASCII logs useful to portudino
Activates ASCII log option when stdout is not a terminal. This is
generally the right thing to do; if not, the behavior can be
overridden in config.yaml using AsciiLogs under Logging. The result
is reasonable system logs for portudino when running under systemd or
the like.
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
* Update sensor drive and low power features.
* Update ST7789 TFT control logic.
* Update Heltec nRF board low power features.
* Update the GPS UART port pointer
* Address some FIXME comments
These comments have since been addressed by more modern code.
Remove them to reduce the clutter in the codebase.
* Remove 'dumb idea' from SimpleAllocator
4 year old code that was set never to run can probably be safely
deleted.
* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 )
* oops - mean't to mark the _dbg variant as an 'extra' board.
* powermon wip
* Make serial port on wio-sdk-wm1110 board work
By disabling the (inaccessible) adafruit USB
* Instrument (radiolib only for now) lora for powermon
per https://github.com/meshtastic/firmware/issues/4136
* powermon gps support
https://github.com/meshtastic/firmware/issues/4136
* Add CPU deep and light sleep powermon states
https://github.com/meshtastic/firmware/issues/4136
* Change the board/swversion bootstring so it is a new "structured" log msg.
* powermon wip
* add example script for getting esp S3 debugging working
Not yet used but I didn't want these nasty tricks to get lost yet.
* Add PowerMon reporting for screen and bluetooth pwr.
* make power.powermon_enables config setting work.
* update to latest protobufs
* fix bogus shellcheck warning
* make powermon optional (but default enabled because tiny and no runtime impact)
* tell vscode, if formatting, use whatever our trunk formatter wants
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)
Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs. I guess I'll start letting that happen with
my future commits ;-).
* add PowerStress module
* nrf52 arduino is built upon freertos, so let platformio debug it
* don't accidentally try to Segger ICE if we are using another ICE
* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.
* remove NoopPrint - it is no longer needed
* when talking to API clients via serial, don't turn off log msgs instead encapsuate them
* fix the build - would loop forever if there were no files to send
* don't use Segger code if not talking to a Segger debugger
* when encapsulating logs, make sure the strings always has nul terminators
* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.
* Important to not print debug messages while writing to the toPhone scratch buffer
* don't include newlines if encapsulating log records as protobufs
* update to latest protobufs (needed for powermon goo)
* PowerStress WIP
* for #4154 and #4136 add concept of dependent gpios...
Which is currently only tested with the LED but eventually
will be used for shared GPIO/screen power rail enable
and LED forcing (which is a sanity check in the power stress
testing)
* fix linter warning
* Transformer is a better name for the LED input > operation > output classes
* PMW led changes to work on esp32-s3
* power stress improvements
* allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types
This allows 'lossless' log reading. If client has requested INDICATE
(rather than NOTIFY) each log record emitted via log() will have to fetched
by the client device before the meshtastic node can continue.
* Fix serious problem with nrf52 BLE logging.
When doing notifies of LogRecords it is important to use the
binary write routines - writing using the 'string' write won't work.
Because protobufs can contain \0 nuls inside of them which if being
parsed as a string will cause only a portion of the protobuf to be sent.
I noticed this because some log messages were not getting through.
* fix gpio transformer stuff to work correctly with LED_INVERTED
Thanks @todd-herbert for noticing this and the great stack trace.
The root cause was that I had accidentially shadowed outPin in a subclass
with an unneeded override. It would break on any board that had inverted
LED power.
fixes
https://github.com/meshtastic/firmware/pull/4230#pullrequestreview-2217389099
* Support driving multiple output gpios from one input.
While investigating https://github.com/meshtastic/firmware/pull/4230#pullrequestreview-2217389099
I noticed in variant.h that there are now apparently newer TBEAMs than mine
that have _both_ a GPIO based power LED and the PMU based LED. Add a splitter
so that we can drive two output GPIOs from one logical signal.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
While working on #4378 I noticed a funny problem: the blinking system
LED was on during deep-sleep. Initially I thought it was some weird
sleep hw config thing but it turns out it was easier but more pervasive.
We had two different preprocessor symbols which both meant approximately the same
thing LED_INVERTED and LED_STATE_ON (though their polarity was opposite).
Some variant files were setting one, others were setting the other, and others were
setting both. heh.
In the case of the board I was testing (seeed tracker wio 1100) it was only setting one
and the default behavior for the other (for all boards) was incorrect. So I did a grep
and it seems like LED_STATE_ON was used more often, so I kept that one and removed
LED_INVERTED everywhere.
* Fix I2C pindefs
* Initial driver testing for HT-VME290
* E-Ink full refresh after canned message pop up
* Tidy variant folders
* Clean ESP32 cpuDeepSleep method
Merge sections, and remove the random assortment of gpio holds left behind.
* Enable 32kHz in variant.h
* Orient E290 with LoRa antenna facing up
* Revert "Clean ESP32 cpuDeepSleep method"
This reverts commit cb8ee508ec2d6bc27a8e228021fd1efbd034c4a0.
* Reduce deep-sleep current for VME213 (non-intrusive)
Originally I made an attempt at tidying up the cpuDeepSleep method, but have reverted that. New commit makes only the changes needed to support VME213. Don't really want the headache of breaking sleep for other variants, especially when this PR is just about implementing new boards.
* Update lib_deps; remove board_level extra
* Make SPI frequency configurable on Native
* Make the tophone queue size configurable for Portduino
* The modified SPISettings must be configured in setup(), after config.yaml is processed
* make MeshService a pointer, so we can configure MAX_RX_TOPHONE at run time
* Got a little over excited with refactoring
* Silence a warning
* Macro to trace log all MeshPackets as JSON
* Comment
* Add trace logging to file for native target
* bytes to hex
* Add time_ms
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Make STM compile again and update toolchain. The binary is too big for the flash. WIP
* Making progress with OSFS, still WIP
* more progress, still too big. Adding RAK3172 to the equasion
* Make STM compile again and update toolchain. The binary is too big for the flash. WIP
* Making progress with OSFS, still WIP
* more progress, still too big. Adding RAK3172 to the equasion
* still too big
* minimize build
* trunk fmt
* fix a couple of symbol clashes
* trunk fmt
* down to 101% with a release vs. debug build and omitting the flash strings
* fix compilation
* fix compilation once more
* update protobufs linkage
* - Toolchain updated
- Fixed macro error
* silence compiler warning
note: do something about this assert...
* new toolkit and fix Power.cpp
* STM32WL make it fit (#4330)
* Add option to exclude I2C parts
The I2C hals and related code uses a significant amount of flash space and aren't required for a basic node.
* Add option to disable Admin and NodeInfo modules
Disabled by default in minimal build. This saves a significant amount of flash
* Disable unused hals
These use up significant flash
* Add float support for printf for debugging
Makes serial look nice for debugging
* This breaks my build for some reason
* These build flags can save a bit of flash
* Don't disable NodeInfo and Admin modules in minimal build
They fit in flash
* Don't include printf float support by default
Only useful for debugging
---------
Co-authored-by: Adam Lawson <dev@goshawk22.uk>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Adam Lawson <dev@goshawk22.uk>
* Make sure to call randomSeed() on esp32
* Randomize the top 22 bits of the Message ID
* Make it clear that we are not calling randomSeed() on purpose
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix protobuf structs handling (#4140)
* Fix protobuf structs handling
* Log instead of assert
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* BLE based logging (#4146)
* WIP log characteristic
* Bluetooth logging plumbing
* Characteristic
* Callback
* Check for nullptr
* Esp32 bluetooth impl
* Formatting
* Add thread name and log level
* Add settings guard
* Remove comments
* Field name
* Fixes esp32
* Open it up
* Whoops
* Move va_end past our logic
* Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151)
* Standardize lat/lon position logs (#4156)
* Standardize lat/lon position logs
* Missed sone and condensed logs
* [create-pull-request] automated change (#4157)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Pause BLE logging during want_config flow (#4162)
* Update NimBLE to 1.4.2 (#4163)
* Implement replies for all telemetry types based on variant tag (#4164)
* Implement replies for all telemetry types based on variant tag
* Remove check for `ignoreRequest`: modules can set this, don't need to check
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Esptool is better
* Explicitly set characteristic
* fix INA3221 sensor (#4168)
- pass wire to begin()
- remove redundant setAddr() (already set in header)
* Show compass on waypoint frame; clear when waypoint deleted (#4116)
* Clear expired or deleted waypoint frame
* Return 0 to CallbackObserver
* Add a missing comment
* Draw compass for waypoint frame
* Display our own waypoints
* [create-pull-request] automated change (#4171)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Add semihosting support for nrf52 devices (#4137)
* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* fix my botched merge - keep board_level = extra flag for rak3631_dbg
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* [create-pull-request] automated change (#4174)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Display alerts (#4170)
* Move static functions into Screen.h, show compass during calibration
* Move to _fontHeight macro to avoid collision
* Move some alert functions to new alert handler
* Catch missed reboot code
* ESP32 fixes
* Bump esp8266-oled-ssd1306
* Fixes for when a device has no screen
* Use new startAlert(char*) helper class
* Add EINK bits back to alert handling
* Add noop class for no-display devices
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Send file system manifest up on want_config (#4176)
* Send file system manifest up on want_config
* Platform specific methods
* Helps to actually make the change
* Clear
* tell vscode, if formatting, use whatever our trunk formatter wants (#4186)
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)
Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs. I guess I'll start letting that happen with
my future commits ;-).
* fix the build - would loop forever if there were no files to send (#4188)
* Show owner.short_name on boot (and E-Ink sleep screen) (#4134)
* Show owner.short_name on boot and sleep screen (on e-ink)
* Update Screen.cpp - new line for short_name
Boot screen short_name now below the region setting.
Looks better on small screens.
* Draw short_name on right
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* nrf52 soft device will watchdog if you use ICE while BT on... (#4189)
so have debugger disable bluetooth.
* correct xiao_ble build preventing sx1262 init (#4191)
* Force a compile time failur if FromRadio or ToRadio get larger than (#4190)
a BLE packet size. We are actually very close to this threshold so
important to make sure we don't accidentally pass it.
* Clear vector after complete config state (#4194)
* Clear after complete config
* Don't collect . entries
* Log file name and size
* [create-pull-request] automated change (#4200)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Make the logs Colorful! (#4199)
* Squash needlessly static functions (#4183)
* Trim extra vprintf and filter for unprintable characters
* Deprecate Router Client role (and make it Client) (#4201)
* [create-pull-request] automated change (#4205)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Move waypoint (#4202)
* Move waypoint screen draw into the waypoint module
* Get the observer set up for the waypoint screen draw
* Static squashing: screen dimensions
Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class.
* Move getCompassDiam into Screen class
(supress compiler warnings)
At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance.
This is probably just another band-aid until these static functions all move.
* Use new getCompassDiam function in AccelerometerThread
* Properly gate display code in WaypointModule
---------
Co-authored-by: Todd Herbert <herbert.todd@gmail.com>
* Fix flakey phone api transition from file manifest to complete (#4209)
* Try fix flakey phone api transition from file manifest to complete
* Skip
* enable colors in platformio serial monitor (#4217)
* When talking via serial, encapsulate log messages in protobufs if necessary (#4187)
* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.
* remove NoopPrint - it is no longer needed
* when talking to API clients via serial, don't turn off log msgs instead encapsuate them
* fix the build - would loop forever if there were no files to send
* don't use Segger code if not talking to a Segger debugger
* when encapsulating logs, make sure the strings always has nul terminators
* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.
* Important to not print debug messages while writing to the toPhone scratch buffer
* don't include newlines if encapsulating log records as protobufs
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* [create-pull-request] automated change (#4218)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Fix SHT41 support (#4222)
* Add SHT41 Serial to I2c Detection Code
On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being
incorrectly detected as SHT31.
This patch adds the necessary serial number for the SHT41 chip to
be correctly detected.
fixesmeshtastic/firmware#4221
* Add missing sensor read for SHT41
* Typo fix in logs - mhz - MHz (#4225)
As reported by karamo, a few different places in our logs had
incorrect capitalization of MHz.
fixesmeshtastic/firmware#4126
* New new BLE logging characteristic with LogRecord protos (#4220)
* New UUID
* New log radio characteristic with LogRecord protobuf
* LogRecord
* Merge derp
* How did you get there
* Trunk
* Fix length
* Remove assert
* minor cleanup proposal (#4169)
* MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup...
Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI
flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI
to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside
configuration.h
* cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET
We already had HAS_NETWORKING as flag in MQTT to mean 'we have
tcpip'. Generallize that and move it into configuration.h so that
we can use it elsewhere.
* Use #pragma once, because supported by gcc and all modern compilers
instead of #ifdef DOTHFILE_H etc...
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add PowerMon support (#4155)
* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 )
* oops - mean't to mark the _dbg variant as an 'extra' board.
* powermon wip
* Make serial port on wio-sdk-wm1110 board work
By disabling the (inaccessible) adafruit USB
* Instrument (radiolib only for now) lora for powermon
per https://github.com/meshtastic/firmware/issues/4136
* powermon gps support
https://github.com/meshtastic/firmware/issues/4136
* Add CPU deep and light sleep powermon states
https://github.com/meshtastic/firmware/issues/4136
* Change the board/swversion bootstring so it is a new "structured" log msg.
* powermon wip
* add example script for getting esp S3 debugging working
Not yet used but I didn't want these nasty tricks to get lost yet.
* Add PowerMon reporting for screen and bluetooth pwr.
* make power.powermon_enables config setting work.
* update to latest protobufs
* fix bogus shellcheck warning
* make powermon optional (but default enabled because tiny and no runtime impact)
* tell vscode, if formatting, use whatever our trunk formatter wants
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)
Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs. I guess I'll start letting that happen with
my future commits ;-).
* add PowerStress module
* nrf52 arduino is built upon freertos, so let platformio debug it
* don't accidentally try to Segger ICE if we are using another ICE
* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.
* remove NoopPrint - it is no longer needed
* when talking to API clients via serial, don't turn off log msgs instead encapsuate them
* fix the build - would loop forever if there were no files to send
* don't use Segger code if not talking to a Segger debugger
* when encapsulating logs, make sure the strings always has nul terminators
* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.
* Important to not print debug messages while writing to the toPhone scratch buffer
* don't include newlines if encapsulating log records as protobufs
* update to latest protobufs (needed for powermon goo)
* PowerStress WIP
* fix linter warning
* Cleanup buffer
* Merge hex for wm1110 target(s)
* Only sdk
* Sudo
* Fix exclude macros (#4233)
* fix MESHTASTIC_EXCLUDE_BLUETOOTH
* fix HAS_SCREEN=0
* fix MESHTASTIC_EXCLUDE_GPS
* fix typo in build-nrf52.sh (#4231)
chmod is the command, '+x' is the argument.
* Tidy Wireless Paper variant files (#4238)
* Quick tidy of pins_arduino.h
Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480)
* Tidy variant.h
* Change deprecated ADC attenuation parameter
From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12`
* Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243)
* Fix BLE logging on nrf52 (#4244)
* allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types
This allows 'lossless' log reading. If client has requested INDICATE
(rather than NOTIFY) each log record emitted via log() will have to fetched
by the client device before the meshtastic node can continue.
* Fix serious problem with nrf52 BLE logging.
When doing notifies of LogRecords it is important to use the
binary write routines - writing using the 'string' write won't work.
Because protobufs can contain \0 nuls inside of them which if being
parsed as a string will cause only a portion of the protobuf to be sent.
I noticed this because some log messages were not getting through.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix build when HAS_NETWORKING is false on nrf52 (#4237)
(tested on a rak4631 by setting HAS_ETHERNET false when shrinking
image)
* If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246)
* Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248)
* Update variant.h
* Update wio-tracker-wm1110.json
* Update wio-sdk-wm1110.json
* Update platformio.ini
* Update platformio.ini
* Add files via upload
* Add files via upload
* Update variant.h
* Cleanup NRF s140 Softdevice variants (#4252)
Note: This idea is originally from @caveman99 and should be
credited as such. Submitting as a separate PR so the work in
meshtastic/firmware#4148 can be a bit cleaner and Seeed boards
can build while that work is ongoing.
The nrf52 boards that depend on the v7 softdevice all use the same
code and linker files. Rather than duplicate the code, keep it
all together with the platform.
* Remove tracker variant specific soft device headers (#4255)
* [create-pull-request] automated change (#4247)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Add wio-sdk-wm1110 to build. (#4258)
The wio-sdk-wm1110 is distinct from the wio-tracker-wm1110, with
different platformio build options and pin config.
This change adds the wio-sdk-wm1110 to the CI matrix so firmware
is built as part of release.
* fix python warning in uf2conf (#4235)
the old regex worked but was technically incorrect. fixes:
Generating NRF52 uf2 file
/home/kevinh/development/meshtastic/firmware/bin/uf2conv.py:195: SyntaxWarning: invalid escape sequence '\s'
words = re.split('\s+', line)
Converting to uf2, output size: 1458688, start address: 0x26000
* Collect hex files and specifically wm1110 sdk
* Skip dfu file for sdk (for now)
* Helps if you remove the original clause
* Add Heltec new boards. (#4226)
* Add Heltec new boards
* Update variant.h
disable RTC by default
* Add Heltec New boards
* Add Heltec new boards
* Update Heltec Mesh Node definition.
* Update Heltec Vision Mater E290
* [create-pull-request] automated change (#4259)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Trunk fmt
* Fix macros
* Move e290 to board level extra while CI is broken
* Tell trunk to ignore bin folder
* Fix missing
* Update trunk.yaml, fix whitespace
* Update trunk.yaml
* Update build_raspbian_armv7l.yml --fix-missing
* [create-pull-request] automated change (#4263)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* GPS Power State tidy-up (#4161)
* Refactor GPSPowerState enum
Identifies a case where the GPS hardware is awake, but an update is not yet desired
* Change terminology
* Clear old lock-time prediction on triple press
* Use exponential smoothing to predict lock time
* Rename averageLockTime to predictedLockTime
* Attempt: Send PMREQ with duration 0 on MCU deep-sleep
* Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep
* Revert "Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep"
This reverts commit 8b697cd2a4.
* Revert "Attempt: Send PMREQ with duration 0 on MCU deep-sleep"
This reverts commit 9d29ec7603.
* Remove unused notifyGPSSleep Observable
Handled with notifyDeepSleep, and enable() / disable()
* WIP: simplify GPS power management
An initial attempt only.
* Honor #3e9e0fd
* No-op when moving between GPS_IDLE and GPS_ACTIVE
* Ensure U-blox GPS is awake to receive indefinite sleep command
* Longer pause when waking U-blox to send sleep command
* Actually implement soft and hard sleep..
* Dynamically estimate the threshold for GPS_HARDSLEEP
* Fallback to GPS_HARDSLEEP, if GPS_SOFTSLEEP unsupported
* Move "excessive search time" behavior to scheduler class
* Minor logging adjustments
* Promote log to warning
* Gratuitous buffer clearing on boot
* Fix inverted standby pin logic
Specifically the standby pin for L76B, L76K and clones
Discovered during T-Echo testing: totally broken function, probe method failing.
* Remove redundant pin init
Now handled by setPowerState
* Replace max() with if statements
Avoid those platform specific implementations..
* Trunk formatting
New round of settings.json changes keep catching me out, have to remember to re-enable my "clang-format" for windows workaround.
* Remove some asserts from setPowerState
Original aim was to prevent sending a 0 second PMREQ to U-blox hardware as part of a timed sleep (GPS_HARDSLEEP, GPS_SOFTSLEEP). I'm not sure this is super important, and it feels tidier to just allow the 0 second sleeptime here, rather than fudge the sleeptime further up.
* Fix an error determining whether GPS_SOFTSLEEP is supported
* Clarify a log entry
* Set PIN_STANDBY for MCU deep-sleep
Required to reach TTGO's advertised 0.25mA sleep current for T-Echo. Without this change: ~6mA.
* Optimize the shutdown current of RAK10701 to around 25uA (#4260)
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* INA3221 sensor: use for bus voltage & environment metrics (#4215)
* use INA3221 for bus voltage; fixes for telemetry variants
- add to sensors available for environment telemetry
(to report voltage/current)
- add vars to define channels to use for battery voltage
(for getBusVoltage) and environment metrics (default
to CH1 for both)
- write to the correct fields on the measurement struct
depending on the measurement variant, and DRY up the
sensor measurement collection code a bit
- this might be suitable for a common implementation for
the INA* sensors in a future PR...
* formatting
* derp
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* WM1110 SDK kit enter serial DFU and add deployment packages (#4266)
* Switch default upload protocol to nrfutil so that pio generates zip deploy packages
* Enter serial DFU on SDK board
* Remove guard for DFU zip from SDK build
* NRF_USE_SERIAL_DFU macro instead
* Show specific frame when updating screen (#4264)
* Updated setFrames in Screen.cpp
Added code to attempt to revert back to the same frame that user was on prior to setFrame reload.
* Space added Screen.cpp
* Update Screen.cpp
Make screen to revert to Frame 0 if the originally displayed frame is no longer there.
* Update Screen.cpp
Inserted boolean holdPosition into setFrames to indicate the requirement to stay on the same frame ( if =true) or else it will switch to new frame .
Only Screen::handleStatusUpdate calls with setFrame(true). ( For Node Updates)
All other types of updates call as before setFrame(), so it will change focus as needed.
* Hold position, even if number of frames increases
* Hold position, if handling an outgoing text message
* Update Screen.cpp
* Reverted chnages related to devicestate.has_rx_text_message
* Reset to master
* CannedMessages only handles routing packets when waiting for ACK
Previously, this was calling Screen::setFrames at unexpected times
* Gather position info about screen frames while regenerating
* Make admin module observable
Notify only when relevant. Currently: only to handle remove_nodenum.
* Optionally specify which frame to focus when setFrames runs
* UIFrameEvent uses enum instead of multiple booleans
* Allow modules to request their own frame to be focussed
This is done internally by calling MeshModule::requestFocus()
Easier this way, insteady of passing the info in the UIFrameEvent:
* Modules don't always know whether they should be focussed until after the UIFrameEvent has been raised, in dramFrame
* Don't have to pass reference to module instance as parameter though several methods
* E-Ink screensaver uses FOCUS_PRESERVE
Previously, it had its own basic implementation of this.
* Spelling: regional variant
* trunk
* Fix HAS_SCREEN guarding
* More HAS_SCREEN guarding
---------
Co-authored-by: BIST <77391720+slash-bit@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: slash-bit <v-b2@live.com>
* Move up telemetry defaults to every 30 minutes (#4274)
* Don't send node info interrogation when ch. util is >25% (#4273)
* Moar LR1110 Targets
* update SD_FLASH_SIZE to 0x27000 (#4232)
The 7.3.0 softdevice needs the extra 1000 :)
* Fix spacing.
---------
Co-authored-by: Mike <mikhael.skvortsov@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Mike G <mkgin@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Warren Guy <5602790+warrenguy@users.noreply.github.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Alexander <156134901+Dorn8010@users.noreply.github.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: quimnut <github@dopegoat.com>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Agent Blu, 006 <blu006@ucr.edu>
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
Co-authored-by: Aaron.Lee <32860565+Heltec-Aaron-Lee@users.noreply.github.com>
Co-authored-by: Daniel.Cao <144674500+DanielCao0@users.noreply.github.com>
Co-authored-by: BIST <77391720+slash-bit@users.noreply.github.com>
Co-authored-by: slash-bit <v-b2@live.com>
* Switch default upload protocol to nrfutil so that pio generates zip deploy packages
* Enter serial DFU on SDK board
* Remove guard for DFU zip from SDK build
* NRF_USE_SERIAL_DFU macro instead
* Fix protobuf structs handling (#4140)
* Fix protobuf structs handling
* Log instead of assert
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* BLE based logging (#4146)
* WIP log characteristic
* Bluetooth logging plumbing
* Characteristic
* Callback
* Check for nullptr
* Esp32 bluetooth impl
* Formatting
* Add thread name and log level
* Add settings guard
* Remove comments
* Field name
* Fixes esp32
* Open it up
* Whoops
* Move va_end past our logic
* Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151)
* Standardize lat/lon position logs (#4156)
* Standardize lat/lon position logs
* Missed sone and condensed logs
* [create-pull-request] automated change (#4157)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Pause BLE logging during want_config flow (#4162)
* Update NimBLE to 1.4.2 (#4163)
* Implement replies for all telemetry types based on variant tag (#4164)
* Implement replies for all telemetry types based on variant tag
* Remove check for `ignoreRequest`: modules can set this, don't need to check
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Esptool is better
* Explicitly set characteristic
* fix INA3221 sensor (#4168)
- pass wire to begin()
- remove redundant setAddr() (already set in header)
* Show compass on waypoint frame; clear when waypoint deleted (#4116)
* Clear expired or deleted waypoint frame
* Return 0 to CallbackObserver
* Add a missing comment
* Draw compass for waypoint frame
* Display our own waypoints
* [create-pull-request] automated change (#4171)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Add semihosting support for nrf52 devices (#4137)
* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* fix my botched merge - keep board_level = extra flag for rak3631_dbg
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* [create-pull-request] automated change (#4174)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Display alerts (#4170)
* Move static functions into Screen.h, show compass during calibration
* Move to _fontHeight macro to avoid collision
* Move some alert functions to new alert handler
* Catch missed reboot code
* ESP32 fixes
* Bump esp8266-oled-ssd1306
* Fixes for when a device has no screen
* Use new startAlert(char*) helper class
* Add EINK bits back to alert handling
* Add noop class for no-display devices
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Send file system manifest up on want_config (#4176)
* Send file system manifest up on want_config
* Platform specific methods
* Helps to actually make the change
* Clear
* tell vscode, if formatting, use whatever our trunk formatter wants (#4186)
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)
Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs. I guess I'll start letting that happen with
my future commits ;-).
* fix the build - would loop forever if there were no files to send (#4188)
* Show owner.short_name on boot (and E-Ink sleep screen) (#4134)
* Show owner.short_name on boot and sleep screen (on e-ink)
* Update Screen.cpp - new line for short_name
Boot screen short_name now below the region setting.
Looks better on small screens.
* Draw short_name on right
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* nrf52 soft device will watchdog if you use ICE while BT on... (#4189)
so have debugger disable bluetooth.
* correct xiao_ble build preventing sx1262 init (#4191)
* Force a compile time failur if FromRadio or ToRadio get larger than (#4190)
a BLE packet size. We are actually very close to this threshold so
important to make sure we don't accidentally pass it.
* Clear vector after complete config state (#4194)
* Clear after complete config
* Don't collect . entries
* Log file name and size
* [create-pull-request] automated change (#4200)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Make the logs Colorful! (#4199)
* Squash needlessly static functions (#4183)
* Trim extra vprintf and filter for unprintable characters
* Deprecate Router Client role (and make it Client) (#4201)
* [create-pull-request] automated change (#4205)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Move waypoint (#4202)
* Move waypoint screen draw into the waypoint module
* Get the observer set up for the waypoint screen draw
* Static squashing: screen dimensions
Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class.
* Move getCompassDiam into Screen class
(supress compiler warnings)
At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance.
This is probably just another band-aid until these static functions all move.
* Use new getCompassDiam function in AccelerometerThread
* Properly gate display code in WaypointModule
---------
Co-authored-by: Todd Herbert <herbert.todd@gmail.com>
* Fix flakey phone api transition from file manifest to complete (#4209)
* Try fix flakey phone api transition from file manifest to complete
* Skip
* enable colors in platformio serial monitor (#4217)
* When talking via serial, encapsulate log messages in protobufs if necessary (#4187)
* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.
* remove NoopPrint - it is no longer needed
* when talking to API clients via serial, don't turn off log msgs instead encapsuate them
* fix the build - would loop forever if there were no files to send
* don't use Segger code if not talking to a Segger debugger
* when encapsulating logs, make sure the strings always has nul terminators
* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.
* Important to not print debug messages while writing to the toPhone scratch buffer
* don't include newlines if encapsulating log records as protobufs
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* [create-pull-request] automated change (#4218)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Fix SHT41 support (#4222)
* Add SHT41 Serial to I2c Detection Code
On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being
incorrectly detected as SHT31.
This patch adds the necessary serial number for the SHT41 chip to
be correctly detected.
fixesmeshtastic/firmware#4221
* Add missing sensor read for SHT41
* Typo fix in logs - mhz - MHz (#4225)
As reported by karamo, a few different places in our logs had
incorrect capitalization of MHz.
fixesmeshtastic/firmware#4126
* New new BLE logging characteristic with LogRecord protos (#4220)
* New UUID
* New log radio characteristic with LogRecord protobuf
* LogRecord
* Merge derp
* How did you get there
* Trunk
* Fix length
* Remove assert
* minor cleanup proposal (#4169)
* MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup...
Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI
flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI
to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside
configuration.h
* cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET
We already had HAS_NETWORKING as flag in MQTT to mean 'we have
tcpip'. Generallize that and move it into configuration.h so that
we can use it elsewhere.
* Use #pragma once, because supported by gcc and all modern compilers
instead of #ifdef DOTHFILE_H etc...
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add PowerMon support (#4155)
* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 )
* oops - mean't to mark the _dbg variant as an 'extra' board.
* powermon wip
* Make serial port on wio-sdk-wm1110 board work
By disabling the (inaccessible) adafruit USB
* Instrument (radiolib only for now) lora for powermon
per https://github.com/meshtastic/firmware/issues/4136
* powermon gps support
https://github.com/meshtastic/firmware/issues/4136
* Add CPU deep and light sleep powermon states
https://github.com/meshtastic/firmware/issues/4136
* Change the board/swversion bootstring so it is a new "structured" log msg.
* powermon wip
* add example script for getting esp S3 debugging working
Not yet used but I didn't want these nasty tricks to get lost yet.
* Add PowerMon reporting for screen and bluetooth pwr.
* make power.powermon_enables config setting work.
* update to latest protobufs
* fix bogus shellcheck warning
* make powermon optional (but default enabled because tiny and no runtime impact)
* tell vscode, if formatting, use whatever our trunk formatter wants
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)
Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs. I guess I'll start letting that happen with
my future commits ;-).
* add PowerStress module
* nrf52 arduino is built upon freertos, so let platformio debug it
* don't accidentally try to Segger ICE if we are using another ICE
* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.
* remove NoopPrint - it is no longer needed
* when talking to API clients via serial, don't turn off log msgs instead encapsuate them
* fix the build - would loop forever if there were no files to send
* don't use Segger code if not talking to a Segger debugger
* when encapsulating logs, make sure the strings always has nul terminators
* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.
* Important to not print debug messages while writing to the toPhone scratch buffer
* don't include newlines if encapsulating log records as protobufs
* update to latest protobufs (needed for powermon goo)
* PowerStress WIP
* fix linter warning
* Cleanup buffer
* Merge hex for wm1110 target(s)
* Only sdk
* Sudo
* Fix exclude macros (#4233)
* fix MESHTASTIC_EXCLUDE_BLUETOOTH
* fix HAS_SCREEN=0
* fix MESHTASTIC_EXCLUDE_GPS
* fix typo in build-nrf52.sh (#4231)
chmod is the command, '+x' is the argument.
* Tidy Wireless Paper variant files (#4238)
* Quick tidy of pins_arduino.h
Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480)
* Tidy variant.h
* Change deprecated ADC attenuation parameter
From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12`
* Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243)
* Fix BLE logging on nrf52 (#4244)
* allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types
This allows 'lossless' log reading. If client has requested INDICATE
(rather than NOTIFY) each log record emitted via log() will have to fetched
by the client device before the meshtastic node can continue.
* Fix serious problem with nrf52 BLE logging.
When doing notifies of LogRecords it is important to use the
binary write routines - writing using the 'string' write won't work.
Because protobufs can contain \0 nuls inside of them which if being
parsed as a string will cause only a portion of the protobuf to be sent.
I noticed this because some log messages were not getting through.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix build when HAS_NETWORKING is false on nrf52 (#4237)
(tested on a rak4631 by setting HAS_ETHERNET false when shrinking
image)
* If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246)
* Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248)
* Update variant.h
* Update wio-tracker-wm1110.json
* Update wio-sdk-wm1110.json
* Update platformio.ini
* Update platformio.ini
* Add files via upload
* Add files via upload
* Update variant.h
---------
Co-authored-by: Mike <mikhael.skvortsov@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Mike G <mkgin@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Warren Guy <5602790+warrenguy@users.noreply.github.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Alexander <156134901+Dorn8010@users.noreply.github.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: quimnut <github@dopegoat.com>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Agent Blu, 006 <blu006@ucr.edu>
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
Note: This idea is originally from @caveman99 and should be
credited as such. Submitting as a separate PR so the work in
meshtastic/firmware#4148 can be a bit cleaner and Seeed boards
can build while that work is ongoing.
The nrf52 boards that depend on the v7 softdevice all use the same
code and linker files. Rather than duplicate the code, keep it
all together with the platform.
* allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types
This allows 'lossless' log reading. If client has requested INDICATE
(rather than NOTIFY) each log record emitted via log() will have to fetched
by the client device before the meshtastic node can continue.
* Fix serious problem with nrf52 BLE logging.
When doing notifies of LogRecords it is important to use the
binary write routines - writing using the 'string' write won't work.
Because protobufs can contain \0 nuls inside of them which if being
parsed as a string will cause only a portion of the protobuf to be sent.
I noticed this because some log messages were not getting through.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup...
Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI
flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI
to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside
configuration.h
* cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET
We already had HAS_NETWORKING as flag in MQTT to mean 'we have
tcpip'. Generallize that and move it into configuration.h so that
we can use it elsewhere.
* Use #pragma once, because supported by gcc and all modern compilers
instead of #ifdef DOTHFILE_H etc...
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Move static functions into Screen.h, show compass during calibration
* Move to _fontHeight macro to avoid collision
* Move some alert functions to new alert handler
* Catch missed reboot code
* ESP32 fixes
* Bump esp8266-oled-ssd1306
* Fixes for when a device has no screen
* Use new startAlert(char*) helper class
* Add EINK bits back to alert handling
* Add noop class for no-display devices
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* fix my botched merge - keep board_level = extra flag for rak3631_dbg
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* WIP log characteristic
* Bluetooth logging plumbing
* Characteristic
* Callback
* Check for nullptr
* Esp32 bluetooth impl
* Formatting
* Add thread name and log level
* Add settings guard
* Remove comments
* Field name
* Fixes esp32
* Open it up
* Whoops
* Move va_end past our logic
Board is very similar to the Heltec HT-C62 based boards (Heltec HT62 variant) but due to wiring of SK6812 Neopixel LED to GPIO2 it becomes incompatible due to the regular HT-C62 dev board using a simple LED on the same GPIO. Depends on [protobufs#521](https://github.com/meshtastic/protobufs/pull/521).
Works:
* SK6812 Neopixel on GPIO2
* [GXCAS GXHTV3](https://www.lcsc.com/product-detail/Temperature-Sensors_GXCAS-GXHTV3C_C5441730.html) (SHTC3 compatible)
Won't fix:
* Battery reading - Board has no voltage divider on VBAT (board has a 1.25mm pitch "JST" style connector and a TP4054 charge IC)
* Main thread LED - Board has no LED on simple GPIO
Board schematic: [HRU3601.pdf](https://github.com/user-attachments/files/15874850/HRU3601.pdf)
Signed-off-by: Andrew Yong <me@ndoo.sg>
* Workaround to allow bluetooth disable on NRF52
* Use miminum tx power for bluetooth
* Reorganize
* Instantiate nrf52Bluetooth correctly..
* Change log message
* DOES NOT WORK
* trunk
* DOES NOT WORK
* trunk
* DOES NOT WORK
* trunk
* WIP: LR11x0 non functional interface code. Please don't expect a working firmware out of this! I don't know what i am doing! :-)
* trunk fmt
* use canon toolchain
* update and fix radiolib dependency
* Switch Radiolib back to GIT checkout
* enable tcxo and fix startReceive
* progress
* Correct midjudgement on scope of build defines.
* - enable peripheral power rail during startup init
- fix portduino builds
* add tracker pinout variant
* update to radiolib 6.6.0 API (aka: godmode is not for mere mortals)
* tracker is not so 'extra' any more
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Bump platfomio/espressif32 version to latest 6.7.0
* Fix deprecated constants
* Remove pin defs already defined by the framework
* ESP_EXT1_WAKEUP_ALL_LOW is deprecated for any target except esp32
* Enable LTO and use newlib nano flavor
* Make trunk happy
* Respect build_unflags of base env
* Recover float printfing
* Disable BLE_SM_PAIR_AUTHREQ_SC
* Distribute BLE_SM_PAIR_KEY_DIST_ID too
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
This seems to fix the ch341 quirk where large packets fail to send. As it can be problematic for other radios, we gate it behind "ch341_quirk" in the config.
* Fix type of nodeNum
Type of nodeNum is NodeNum, not uint
* typo
fixed typo "resumeAdverising()"
* fix missing #include "time.h"
Missing include breaks compilation with gccnoneeabi 12.3.1 for nrf52 targets on windows hosts.
* change type uint to unsigned int
uint is not a standard type. Using uint breaks compilation with gccnoneeabi 12.3.1 for nRF52 targets on windows hosts.
* fix type of channel_num
Type of channel_num should be uint32_t (as this is the type of hash() and numChannels).
Using uint non-standard type uint breaks compilation with gccnoneeabi 12.3.1 for nRF52 targets on windows hosts.
* Update nrf52.ini
Default build type should be "release" as this is the default of platformio.
* Update GPS.cpp
uint to unsigned int
* Add better support for the Adafruit PiTFT 2.8 for Native
* native: Make touch i2c address configurable
* Bump portduino to pick up I2C features
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add new variant: TWC_mesh_v4
* fix trunk format
* fix format under wsl
* change board to TWC_mesh_v4
* change platformio & variant.h properly
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
This changeset gives us the ability to specify a separate SPI device for the LoRa, Display, and Touchscreen. The changes in Portduino also add support for specifying a new SPI speed for each transaction. All together, this means that we can let the Linux OS manage the CS lines, and also get much faster SPI speeds, leading to better framerates.
* Add multiple SPI devices to put Radio, Display, and Touchscreen on each their own
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* remove redundant logic
* Handle special screens for old EInkDisplayClass
* Handle special screens for EInkDynamicDisplay class
* Join an async refresh in progress to avoid skipping screensaver
* attempt trunk fix
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Added WebServer/WebServices for Native Linux Meshtastic and web gui
* Fix bug in login functionality
* Added customized config of portdunio.ini with LovyannGFX from marelab repro
* Compile Problem resolved with developer version of LovyanGFX.git
* Compile against dev version
* Fixes to fit into main branch
* Update variant.h, main.cpp, .gitignore, WebServer.cpp, esp32s2.ini, WebServer.h, ContentHandler.cpp, rp2040.ini, nrf52.ini, ContentHelper.cpp, Dockerfile, ContentHandler.h, esp32.ini, stm32wl5e.ini
* Added linux pi std /usr/include dir
* Adding /usr/innclude for Linux compile against native libs that are not hadled by platformio
* Review log level changes & translation
* Update Dockerfile
* Fix Typo & VFS ref. Part1
* Fix Typo & VFS ref.
* Dev Version for ulfius web lib
* Update platformio.ini
* Free VFS path string
* Remove unintended changes
* More unintentional changes
* Make the HTTP server optional on native
* Tune-up for Native web defaults
* Don't modify build system yet
* Remove more unneeded changes
---------
Co-authored-by: marc hammermann <marchammermann@googlemail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Fix Heltec Tracker Screen issues
Fix Heltec Tracker Screen issues like wrong offsets, display size and screen not shutting down.
Divides board into two different envs for 1.0 and 1.1 version PCB
* Helteck wireless tracker default version V1_1
* rename heltec tracker 1.1 - trunk fmt
rename varian of heltec tracker 1.1 to "heltec tracker" to be retro-compatible.
Trunk formatting.
* Heltec Tracker increase Screen update to 3Hz
Heltec Tracker increase Screen update to 3Hz from 1Hz
