861 Commits

Author	SHA1	Message	Date
Austin	769f0623be	Fix: T-Watch-S3 has 8MB Flash (#6407)	2025-03-27 07:46:16 -05:00
Mark Trevor Birss	6c17694b64	CrowPanel e-Ink Updates for 4.2 and 2.9 inch (#6401) ... * Update platformio.ini * Update EInkDisplay2.cpp * Update EInkDisplay2.h	2025-03-27 11:06:41 +02:00
nledevil	53a7afff41	Adding Variants for Hackerboxes ESP32C3 OLED kit and the ESP32 IO Kit (#6319)	2025-03-25 22:57:06 +01:00
Manuel	e9d8a3d7f9	MUI: increase stack, cache and drawbuffer (#6389) ... * increase stack, cache and drawbuffer * bump device-ui lib * T-Deck map: switch to full redraw	2025-03-24 19:30:17 -05:00
Tom Fifield	3ca6d2f230	[WIP] Add RAK12035VB Soil Moisture Sensor support ... Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann	2025-03-22 11:11:10 +11:00
Thomas Göttgens	0951fdd49b	Add support for Heltec HRI-3621 industrial sensor hub (#6366)	2025-03-21 16:12:49 +01:00
Thomas Göttgens	848a3ed6a1	implement littlefs for stm32 (#5987) ... Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Daniel Peter Chokola <dan.chokola@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-03-21 16:12:27 +01:00
Austin	46235f6f8b	RP2xx0: Add UDP Multicast support (#6327)	2025-03-20 08:49:28 -05:00
Austin	6673cb9292	Increase MAX_NUM_NODES on high-flash ESP32_S3 (#6311)	2025-03-18 20:19:51 -05:00
Thomas Göttgens	2d565c2921	trunk'd	2025-03-16 16:18:12 +01:00
dylanli	64b9cfe199	update seeed-xiao-nrf52840-kit board defination (#6318) ... - Due to the lack of pins, we have temporarily removed the button. There are some technical solutions that can solve this problem, and we are currently exploring and researching them	2025-03-16 16:04:24 +01:00
Thomas Göttgens	1640fb105d	new device: Lilygo T-Eth-Elite (#6321)	2025-03-15 14:15:35 +01:00
Thomas Göttgens	79233fe99d	mainline tlora v3 (#6322)	2025-03-15 11:30:58 +01:00
Mark Trevor Birss	e9effb9fff	Update platformio.ini (#6286)	2025-03-11 15:45:20 +02:00
Mark Trevor Birss	cb6dfb66d2	Update ME25LS01/MS24SF1 comment out upload port (#6285) ... * Update platformio.ini * Update platformio.ini * Update platformio.ini	2025-03-11 14:56:12 +02:00
Manuel	7c3eddebc2	device-ui: exFat support (#6279)	2025-03-10 16:42:29 -05:00
Austin	16a0dce83c	Ebyte E77 (STM32) DevKit support (#6255)	2025-03-07 17:37:54 -06:00
Mark Trevor Birss	60e46cd765	Update platformio.ini (#6245)	2025-03-07 14:21:06 +08:00
Mark Trevor Birss	f6a9e7d741	Add initial support for CrowPanel ESP32 5.79” E-paper HMI (#6233)	2025-03-06 11:28:43 +01:00
todd-herbert	e6a98b1d6b	InkHUD refactoring (#6216) ... * chore: todo.txt * chore: comments * fix: no fast refresh on VME290 Reverts a line of code which was accidentally committed * refactor: god class Divide the behavior from the old WindowManager class into several subclasses which each have a clear role. * refactor: cppcheck medium warnings Enough to pass github CI for now * refactor: updateType selection * refactor: don't use a setter for the shared AppletFonts * fix: update prioritization forceUpdate calls weren't being prioritized * refactor: remove unhelpful logging getTimeString is used for parsing our own time, but also the timestamps of messages. The "one time only" log printing will likely fire in unhelpful situations. * fix: " " * refactor: get rid of types.h file for enums * Keep that sneaky todo file out of commits	2025-03-06 11:25:41 +01:00
Ben Meadors	6c8058e1d8	Update SEEED_XIAO_NRF52840_KIT (#6239)	2025-03-06 09:44:22 +08:00
dylanli	445efe9e21	Add support for seeed_xiao_nrf52840_kit (#6231) ... * add support for seeed_xiao_nrf52840_kit * Update platformio.ini remove board level define	2025-03-05 16:22:25 -06:00
Austin	b96b027926	Consume device-ui as a pio library (#6193)	2025-03-05 16:19:59 -06:00
Mictronics	f0f2cd0e0e	RAK11310 Fix build with latest Arduino framework (#6227)	2025-03-04 21:39:10 +01:00
Matt Andreko	fdbadc992c	Enable GPS functionality for RAK4631_eth_gw variant (#6229)	2025-03-04 21:27:57 +01:00
Thomas Göttgens	6715662281	don't build the niche* stuff for non-inkHUD builds. (#6217)	2025-03-03 09:10:47 -06:00
Mictronics	b6562e175f	RAK11310 support for RAK12002 RTC added. (#6210)	2025-03-03 11:08:02 +01:00
Mictronics	43a6e711da	RAK11310: Update to last building platform package and possibly fix for #5361 (#6202)	2025-03-02 13:15:30 +01:00
Ben Meadors	5c8f1fb46b	Enable external (UART) GPS support on WM1110 tracker dev board (#6189)	2025-03-01 08:27:43 -06:00
Ben Meadors	99d3e5eb70	2.6 changes (#5806) ... * 2.6 protos * [create-pull-request] automated change (#5789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Hello world support for UDP broadcasts over the LAN on ESP32 (#5779) * UDP local area network meshing on ESP32 * Logs * Comment * Update UdpMulticastThread.h * Changes * Only use router->send * Make NodeDatabase (and file) independent of DeviceState (#5813) * Make NodeDatabase (and file) independent of DeviceState * 70 * Remove logging statement no longer needed * Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772) * File system persistence fixes * [create-pull-request] automated change (#6000) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update ref * Back to 80 * [create-pull-request] automated change (#6002) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * 2.6 <- Next hop router (#6005) * Initial version of NextHopRouter * Set original hop limit in header flags * Short-circuit to FloodingRouter for broadcasts * If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter * Set last byte to 0xFF if it ended at 0x00 As per an idea of @S5NC * Also update next-hop based on received DM for us * temp * Add 1 retransmission for intermediate hops when using NextHopRouter * Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback * Update protos, store multiple relayers * Remove next-hop update logic from NeighborInfoModule * Fix retransmissions * Improve ACKs for repeated packets and responses * Stop retransmission even if there's not relay node * Revert perhapsRebroadcast() * Remove relayer if we cancel a transmission * Better checking for fallback to flooding * Fix newlines in traceroute print logs * Stop retransmission for original packet * Use relayID * Also when want_ack is set, we should try to retransmit * Fix cppcheck error * Fix 'router' not in scope error * Fix another cppcheck error * Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK Also check for broadcast in `getNextHop()` * Formatting and correct NUM_RETRANSMISSIONS * Update protos * Start retransmissions in NextHopRouter if ReliableRouter didn't do it * Handle repeated/fallback to flooding packets properly First check if it's not still in the TxQueue * Guard against clients setting `next_hop`/`relay_node` * Don't cancel relay if we were the assigned next-hop * Replies (e.g. tapback emoji) are also a valid confirmation of receipt --------- Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> * fix "native" compiler errors/warnings NodeDB.h * fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259) * lib update: light theme * fix merge issue * lib update: home buttons + button try-fix * lib update: icon color fix * lib update: fix instability/crash on notification * update lib: timezone * timezone label * lib update: fix set owner * fix spiLock in RadioLibInterface * add picomputer tft build * picomputer build * fix compiler error std::find() * fix merge * lib update: theme runtime config * lib update: packet logger + T-Deck Plus * lib update: mesh detector * lib update: fix brightness & trackball crash * try-fix less paranoia * sensecap indicator updates * lib update: indicator fix * lib update: statistic & some fixes * lib-update: other T-Deck touch driver * use custom touch driver for Indicator * lower tft task prio * prepare LVGL ST7789 driver * lib update: try-fix audio * Drop received packets from self * Additional decoded packet ignores * Honor flip & color for Heltec T114 and T190 (#4786) * Honor TFT_MESH color if defined for Heltec T114 or T190 * Temporary: point lib_deps at fork of Heltec's ST7789 library For demo only, until ST7789 is merged * Update lib_deps; tidy preprocessor logic * Download debian files after firmware zip * set title for protobufs bump PR (#4792) * set title for version bump PR (#4791) * Enable Dependabot * chore: trunk fmt * fix dependabot syntax (#4795) * fix dependabot syntax * Update dependabot.yml * Update dependabot.yml * Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797) * Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800) * Actions: Semgrep Images have moved from returntocorp to semgrep (#4774) https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved! Official Docker images for Semgrep now available at semgrep/semgrep." Patch updates our CI workflow for these images. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Bump meshtestic from `31ee3d9` to `37245b3` (#4799) Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`. - [Commits](31ee3d90c8...37245b3d61) --- updated-dependencies: - dependency-name: meshtestic dependency-type: direct:production ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * [create-pull-request] automated change (#4789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798) Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4. - [Release notes](https://github.com/pnpm/action-setup/releases) - [Commits](https://github.com/pnpm/action-setup/compare/v2...v4) --- updated-dependencies: - dependency-name: pnpm/action-setup dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Raspberry Pico2 - needs protos * Re-order doDeepSleep (#4802) Make sure PMU sleep takes place before I2C ends * [create-pull-request] automated change * heltec-wireless-bridge requires Proto PR first * feat: trigger class update when protobufs are changed * meshtastic/ is a test suite; protobufs/ contains protobufs; * Update platform-native to pick up portduino crash fix (#4807) * Hopefully extract and commit to meshtastic.github.io * CI fixes * [Board] DIY "t-energy-s3_e22" (#4782) * New variant "t-energy-s3_e22" - Lilygo T-Energy-S3 - NanoVHF "Mesh-v1.06-TTGO-T18" board - Ebyte E22 Series * add board_level = extra * Update variant.h --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> * Consolidate variant build steps (#4806) * poc: consolidate variant build steps * use build-variant action * only checkout once and clean up after run * Revert "Consolidate variant build steps (#4806)" (#4816) This reverts commit 9f8d86cb25. * Make Ublox code more readable (#4727) * Simplify Ublox code Ublox comes in a myriad of versions and settings. Presently our configuration code does a lot of branching based on versions being or not being present. This patch adds version detection earlier in the piece and branches on the set gnssModel instead to create separate setup methods for Ublox 6, Ublox 7/8/9, and Ublox10. Additionally, adds a macro to make the code much shorter and more readable. * Make trunk happy * Make trunk happy --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consider the LoRa header when checking packet length * Minor fix (#4666) * Minor fixes It turns out setting a map value with the index notation causes an lookup that can be avoided with emplace. Apply this to one line in the StoreForward module. Fix also Cppcheck-determined highly minor performance increase by passing gpiochipname as a const reference :) The amount of cycles used on this laptop while learning about these callouts from cppcheck is unlikely to ever be more than the cycles saved by the fixes ;) * Update PortduinoGlue.cpp * Revert "Update classes on protobufs update" (#4824) * Revert "Update classes on protobufs update" * remove quotes to fix trunk. --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Implement optional second I2C bus for NRF52840 Enabled at compile-time if WIRE_INFERFACES_COUNT defined as 2 * Add I2C bus to Heltec T114 header pins SDA: P0.13 SCL: P0.16 Uses bus 1, leaving bus 0 routed to the unpopulated footprint for the RTC (general future-proofing) * Tidier macros * Swap SDA and SCL SDA=P0.16, SCL=P0.13 * Refactor and consolidate time window logic (#4826) * Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Rename message length headers and set payload max to 255 (#4827) * Rename message length headers and set payload max to 255 * Add MESHTASTIC_PKC_OVERHEAD * compare to MESHTASTIC_HEADER_LENGTH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> * Check for null before printing debug (#4835) * fix merge * try-fix crash * lib update: fix neighbors * fix GPIO0 mode after I2S audio * lib update: audio fix * lib update: fixes and improvements * extra * added ILI9342 (from master) * device-ui persistency * review update * fix request, add handled * fix merge issue * fix merge issue * remove newline * remove newlines from debug log * playing with locks; but needs more testing * diy mesh-tab initial files * board definition for mesh-tab (not yet used) * use DISPLAY_SET_RESOLUTION to avoid hw dependency in code * no telemetry for Indicator * 16MB partition for Indicator * 8MB partition for Indicator * stability: add SPI lock before saving via littleFS * dummy for config transfer (#5154) * update indicator (due to compile and linker errors) * remove faulty partition line * fix missing include * update indicator board * update mesh-tab ILI9143 TFT * fix naming * mesh-tab targets * try: disable duplicate locks * fix nodeDB erase loop when free mem returns invalid value (0, -1). * upgrade toolchain for nrf52 to gcc 9.3.1 * try-fix (workaround) T-Deck audio crash * update mesh-tab tft configs * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * update meshtab voltage divider * update mesh-tab ini * Fixed the issue that indicator device uploads via rp2040 serial port in some cases. * Fixed the issue that the touch I2C address definition was not effective. * Fixed the issue that the wifi configuration saved to RAM did not take effect. * rotation fix; added ST7789 3.2" display * dreamcatcher: assign GPIO44 to audio mclk * mesh-tab touch updates * add mesh-tab powersave as default * fix DIO1 wakeup * mesh-tab: enable alert message menu * Streamline board definitions for first tech preview. (#5390) * Streamline board definitions for first tech preview. TBD: Indicator Support * add point-of-checkin * use board/unphone.json --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> * fix native targets * add RadioLib debugging options for (T-Deck) * fix T-Deck build * fix native tft targets for rpi * remove wrong debug defines * t-deck-tft button is handled in device-ui * disable default lightsleep for indicator * Windows Support - Trunk and Platformio (#5397) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 * fix radioLib warnings for T-Deck target * wake screen with button only * use custom touch driver * define wake button for unphone * use board definition for mesh-tab * mesh-tab rotation upside-down * update platform native * use MESH_TAB hardware model definition * radioLib update (fix crash/assert) * reference seeed indicator fix commit arduino-esp32 * Remove unneeded file change :) * disable serial module and tcp socket api for standalone devices (#5591) * disable serial module and tcp socket api for standalone devices * just disable webserver, leave wifi available * disable socket api * mesh-tab: lower I2C touch frequency * log error when packet queue is full * add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * T-Deck: revert back to lovyanGFX touch driver * T-Deck: increase allocated PSRAM by 50% * mesh-tab: streamline target definitions * update RadioLib 7.1.2 * mesh-tab: fix touch rotation 4.0 inch display * Mesh-Tab platformio: 4.0inch: increase SPI frequency to max * mesh-tab: fix rotation for 3.5 IPS capacitive display * mesh-tab: fix rotation for 3.2 IPS capacitive display * restructure device-ui library into sub-directories * preparations for generic DisplayDriverFactory * T-Deck: increase LVGL memory size * update lib * trunk fmt --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> * Version this * Update platformio.ini (#6006) * tested higher speed and it works * Un-extra * Add -tft environments to the ci matrix * Exclude unphone tft for now. Something is wonky * fixed Indicator touch issue (causing IO expander issues), added more RAM * update lib * fixed Indicator touch issue (causing IO expander issues), added more RAM (#6013) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * update device-ui lib * Fix T-Deck SD card detection (#6023) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * fix SDCard for T-Deck; allow SPI frequency config * meshtasticd: Add X11 480x480 preset (#6020) * Littlefs per device * 2.6 update * [create-pull-request] automated change (#6037) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * InkHUD UI for E-Ink (#6034) * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * InkHUD: initial commit (WIP) Publicly discloses the current work in progress. Not ready for use. * feat: battery icon * chore: implement meshtastic/firmware #5454 Clean up some inline functions * feat: menu & settings for "jump to applet" * Remove the beforeRender pattern It hugely complicates things. If we can achieve acceptable performance without it, so much the better. * Remove previous Map Applet Needs re-implementation to work without the beforeRender pattern * refactor: reimplement map applet Doesn't require own position Doesn't require the beforeRender pattern to precalculate; now all-at-once in render Lays groundwork for fixed-size map with custom background image * feat: autoshow Allow user to select which applets (if any) should be automatically brought to foreground when they have new data to display * refactor: tidy-up applet constructors misc. jobs including: - consistent naming - move initializer-list-only constructors to header - give derived applets unique identifiers for MeshModule and OSThread logging * hotfix: autoshow always uses FAST update In future, it *will* often use FAST, but this will be controlled by a WindowManager component which has not yet been written. Hotfixed, in case anybody is attempting to use this development version on their deployed devices. * refactor: bringToForeground no longer requests FAST update In situations where an applet has moved to foreground because of user input, requestUpdate can be manually called, to upgrade to FAST refresh. More permanent solution for #23e1dfc * refactor: extract string storage from ThreadedMessageApplet Separates the code responsible for storing the limited message history, which was previously part of the ThreadedMessageApplet. We're now also using this code to store the "most recent message". Previously, this was stored in the `InkHUD::settings` struct, which was much less space-efficient. We're also now storing the latest DM, laying the foundation for an applet to display only DMs, which will complement the threaded message applet. * fix: text wrapping Attempts to fix a disparity between `Applet::printWrapped` and `Applet::getWrappedTextHeight`, which would occasionally cause a ThreadedMessageApplet message to render "too short", overlapping other text. * fix: purge old constructor This one slipped through the last commit.. * feat: DM Applet Useful in combination with the ThreadedMessageApplets, which don't show DMs * fix: applets shouldn't handle events while deactivated Only one or two applets were actually doing this, but I'm making a habit of having all applets return early from their event handling methods (as good practice), even if those methods are disabled elsewhere (e.g. not observing observable, return false from wantPacket) * refactor: allow requesting update without requesting autoshow Some applets may want to redraw, if they are displayed, but not feel the information is worth being brought to foreground for. Example: ActiveNodesApplet, when purging old nodes from list. * feat: custom "Recently Active" duration Allows users to tailor how long nodes will appear in the "Recents" applets, to suit the activity level of their mesh. * refactor: rename some applets * fix: autoshow * fix: getWrappedTextHeight Remove the "simulate" option from printWrapped; too hard to keep inline with genuine printing (because of AdafruitGFX Fonts' xAdvance, mabye?). Instead of simulating, we printWrapped as normal, and discard pixel output by setting crop. Both methods are similarly inefficient, apparently. * fix: text wrapping in ThreadedMessageApplet Wrong arguments were passed to Applet::printWrapped * feat: notifications for text messages Only shown if current applet does not already display the same info. Autoshow takes priority over notifications, if both would be used to display the same info. * feat: optimize FAST vs FULL updates New UpdateMediator class counts the number of each update type, and suggets which one to use, if the code doesn't already have an explicit prefence. Also performs "maintenance refreshes" unprovoked if display is not given an opportunity to before a FULL refresh through organic use. * chore: update todo list * fix: rare lock-up of buttons * refactor: backlight Replaces the initial proof-of-concept frontlight code for T-Echo Presses less than 5 seconds momentarily illuminate the display Presses longer than 5 seconds latch the light, requiring another tap to disable If user has previously removed the T-Echo's capacitive touch button (some DIY projects), the light is controlled by the on-screen menu. This fallback is used by all T-Echo devices, until a press of the capacitive touch button is detected. * feat: change tile with aux button Applied to VM-E290. Working as is, but a refactor of WindowManager::render is expected shortly, which will also tidy code from this push. * fix: specify out-of-the-box tile assignments Prevents placeholder applet showing on initial boot, for devices which use a mult-tile layout by default (VM-E290) * fix: verify settings version when loading * fix: wrong settings version * refactor: remove unimplemented argument from requestUpdate Specified whether or not to update "async", however the implementation was slightly broken, Applet::requestUpdate is only handled next time WindowManager::runOnce is called. This didn't allow code to actually await an update, which was misleading. * refactor: renaming Applet::render becomes Applet::onRender. Tile::displayedApplet becomes Tile::assignedApplet. New onRender method name allows us to move some of the pre and post render code from WindowManager into new Applet::render method, which will call onRender for us. * refactor: rendering Bit of a tidy-up. No intended change in behavior. * fix: optimize refresh times Shorter wait between retrying update if display was previously busy. Set anticipated update durations closer to observed values. No signifacant performance increase, but does decrease the amount of polling required. * feat: blocking update for E-Ink Option to wait for display update to complete before proceeding. Important when shutting down the device. * refactor: allow system applets to lock rendering Temporarily prevents other applets from rendering. * feat: boot and shutdown screens * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: Bluetooth pairing screen * fix: InkHUD defaults not honored * fix: random Bluetooth pin for NicheGraphics UIs * chore: button interrupts tested * fix: emoji reactions show as blank messages * fix: autoshow and notification triggered by outgoing message * feat: save InkHUD data before reboot Implemented with a new Observable. Previously, config and a few recent messages were saved on shutdown. These were lost if the device rebooted, for example when firmware settings were changed by a client. Now, the InkHUD config and recent messages saved on reboot, the same as during an intentional shutdown. * feat: imperial distances Controlled by the config.display.units setting * fix: hide features which are not yet implemented * refactor: faster rendering Previously, only tiles which requested update were re-rendered. Affected tiles had their region blanked before render, pixel by pixel. Benchmarking revealed that it is significantly faster to memset the framebuffer and redraw all tiles. * refactor: tile ownership Tiles and Applets now maintain a reciprocal link, which is enforced by asserts. Less confusing than the old situation, where an applet and a tile may disagree on their relationship. Empty tiles are now identified by a nullptr *Applet, instead of by having the placeholderApplet assigned. * fix: notifications and battery when menu open Do render notifications in front of menu; don't render battery icon in front of menu. * fix: simpler defaults Don't expose new users to multiplexed applets straight away: make them enable the feature for themselves. * fix: Inputs::TwoButton interrupts, when only one button in use * fix: ensure display update is complete when ESP32 enters light sleep Many panels power down automatically, but some require active intervention from us. If light sleep (ESP32) occurs during a display update, these panels could potentially remain powered on, applying voltage the pixels for an extended period of time, and potentially damaging the display. * fix: honor per-variant user tile limit Set as the default value for InkHUD::settings.userTiles.maxCount in nicheGraphics.h * feat: initial InkHUD support for Wireless Paper v1.1 and VM-E213 * refactor: Heard and Recents Applets Tidier code, significant speed boost. Possibly no noticable change in responsiveness, but rendering now spends much less time blocking execution, which is important for correction functioning of the other firmware components. * refactor: use a common pio base config Easier to make any future PlatformIO config changes * feat: tips Show information that we think the user might find helpful. Some info shown first boot only. Other info shown when / if relevant. * fix: text wrapping for '\n' Previously, the newline was honored, but the adojining word was not printed. * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: observable for reboot * refactor: Heltec VM-E290 installDefaultConfig * fix: random Bluetooth pin for NicheGraphics UIs * update device-ui: fix touch/crash issue while light sleep * Collect inkhud * fix: InkHUD shouldn't nag about timezone (#6040) * Guard eink drivers w/ MESHTASTIC_INCLUDE_NICHE_GRAPHICS * Case sensitive perhaps? * More case-sensitivity instances * Moar * RTC * Yet another case issue! * Sigh... * MUI: BT programming mode (#6046) * allow BT connection with disabled MUI * Update device-ui --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * MUI: fix nag timeout, disable BT programming mode for native (#6052) * allow BT connection with disabled MUI * Update device-ui * MUI: fix nag timeout default and remove programming mode for native --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * remove debuglog leftover * Wireless Paper: remove stray board_level = extra (#6060) Makes sure the InkHUD version gets build into the release zip * Fixed persistence stragglers from NodeDB / Device State divorce (#6059) * Increase `MAX_THREADS` for InkHUD variants with WiFi (#6064) * Licensed usage compliance (#6047) * Prevent psk and legacy admin channel on licensed mode * Move it * Consolidate warning strings * More holes * Device UI submodule bump * Prevent licensed users from rebroadcasting unlicensed traffic (#6068) * Prevent licensed users from rebroadcasting unlicensed traffic * Added method and enum to make user license status more clear * MUI: move UI initialization out of main.cpp and adding lightsleep observer + mutex (#6078) * added device-ui to lightSleep observers for handling graceful sleep; refactoring main.cpp * bump lib version * Update device-ui * unPhone TFT: include into build, enable SD card, increase PSRAM (#6082) * unPhone-tft: include into build, enable SD card, increase assigned PSRAM * lib update * Backup / migrate pub private keys when upgrading to new files in 2.6 (#6096) * Save a backup of pub/private keys before factory reset * Fix licensed mode warning * Unlock spi on else file doesn't exist * Update device-ui * Update protos and device-ui * [create-pull-request] automated change (#6129) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Proto * [create-pull-request] automated change (#6131) * Proto update for backup * [create-pull-request] automated change (#6133) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update protobufs * Space * [create-pull-request] automated change (#6144) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Protos * [create-pull-request] automated change (#6152) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Updeet * device-ui lib update * fix channel OK button * device-lib update: fix settings panel -> no scrolling * device-ui lib: last minute update * defined(SENSECAP_INDICATOR) * MUI hot-fix pub/priv keys * MUI hot-fix username dialog * MUI: BT programming mode button * Update protobufs --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-01 06:18:33 -06:00
Austin	4e575872da	junk in the Trunk (#6149)	2025-02-25 16:41:45 +08:00
GUVWAF	cfcd9cc210	Revert "Rak4631 remove spi1 (#6042)" (#6121) ... This reverts commit 9b46cb4ef0.	2025-02-22 08:03:05 -06:00
Tom Fifield	ec0eafedab	Move variant-specific lines back to variant (#6044) ... Last release a change introduced different branching functions in gps.cpp based on the model of a device. This makes the code less readable and introduces the potential for bugs. This patch creates a new variable, GPS_PROBETRIES that can be set in variant.h of devices that will control how many times we will probe for GPS presence. It sets up the T1000-E to use this variable and cleans the code in gps.c	2025-02-20 07:48:37 -06:00
Mictronics	9930bba3f5	Add Pico2W variant including Wifi support. (#6062)	2025-02-20 10:56:34 +01:00
Austin	f1dc1b309a	PIO: Cleanup dependency naming (#6090)	2025-02-19 18:14:54 -06:00
Sebastian Muszynski	bb73555209	Expose INA219 measurement as battery voltage for Seeed Xiao ESP32S3 (#6070) ... * Expose INA219 measurement as battery voltage for Seeed Xiao ESP32S3 * Define BATTERY_PIN and don't block a random GPIO	2025-02-19 06:36:59 -06:00
Tom Fifield	93c64cb442	Dependencies: minor version updates (#6045) ... platformio/espressif32@6.9.0 --> 6.10.0 lewisxhe/XPowersLib@^0.2.6 --> 0.2.7 platformio/framework-arduinoststm32@~Oct 2024 --> 4.20900.0 zinggjm/GxEPD2@^1.4.9 --> 1.6.2 tool-esptoolpy@^1.40500.0 --> 1.40801.0 Used platformio tool to check, kept to minor version updates, checked release notes for any breaking changes.	2025-02-19 06:32:38 -06:00
A_Ponzano	7eb77276cd	Add support for new NRF52 board, MeshLink (#5736) ... * Add support for MeshLink * Updated, enabled watchdog and added button definition * added eink variant and removed some compile errors * Small board json file edit * Finally got trunk working (somehow?), this is just cleanup with trunk fmt * Various improvements and cleanup. Removed the use of PIN_3V3_En and defined a specific WD_EN pin instead for better clarity. Will do a bit more testing asap to make sure everything still works as intended :) * Enable on-board QSPI Flash * run trunk fmt with clang-format --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-02-16 19:49:17 -06:00
porkcube	4407d9e040	assigning SDA/SCL so it actually works 8| (#6065)	2025-02-16 06:39:48 -06:00
Woutvstk	9b46cb4ef0	Rak4631 remove spi1 (#6042) ... * Removed non-existant SPI1 interface on rak4631 * trunk fmt	2025-02-14 12:53:22 -06:00
porkcube	01935ea35e	Add XIAO nRF52840 + Wio SX1262 DIY Variant (#5976) ... * added xiao nRF52840 + xiao wio sx1262 DIY variant * fix path / make buildy buildy * pcf cruft from personal hw --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-02-14 06:50:28 -06:00
Manuel	eb650a6adb	set TCXO to 2.4V (#6036)	2025-02-11 10:34:37 -06:00
dylanli	4e8c4f0d55	T1000-E hardware updates and GPS positioning accuracy optimisation (#6003) ... * T1000-E button setting update * T1000-E GNSS lock error fix * T1000-E GNSS improve detection success --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-02-07 10:02:56 +02:00
Tom	64def246ee	Corrected some misinformation (#5995) ... Change the module text too soon , before it had chance to reach a final conclusion. Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com>	2025-02-06 11:36:04 +08:00
Thomas Göttgens	5c17afb2ac	Clean up some legacy macro definitions (#5983)	2025-02-03 09:36:05 -06:00
Tom	3a34f8beaf	E80 promicro update (#5967) ... * add readme and update rfswitch * Updated readme to include all data from Ebyte * Added results from switch testing & notes thereon * fixed picture * Whoops! Forgot to uncomment some settings from test. * Update readme.md * Delete variants/diy/nrf52_promicro_diy_tcxo/E80_RSSI_per_case.png * Add webp image to appease trunk * Update readme.md * Trunky trunk trunk * Clang and the trunk is done	2025-02-03 20:16:35 +08:00
Manuel	2d42e1b2bc	fix: TCXO_OPTIONAL featuring SenseCAP Indicator (V1/V2) (#5948) ... * fix TCXO_OPTIONAL * fix LOG_WARN * fix lora.begin() returns -707 * trunk fmt	2025-01-27 14:00:12 -06:00
Aleksey Vasilenko	10d553087c	Add missing build_unflags (#5941) ... Fixes 'undefined reference to app_main' build error for my_esp32s3_diy_eink and my_esp32s3_diy_oled variants.	2025-01-26 16:54:26 +08:00
Thomas Göttgens	973b453d43	Update RAK2560 code (#5844) ... * * Update RAK9154 sensor to tx remote power telemetry * remove uf2 script, pio run does that inline * move sensor module to correct position * disable LED and Accelerometer code on rak2560 * trunk fmt * mention epaper variant * attention, revert, revert * Enable Environment Telemetry of these values * fix float values	2025-01-20 09:34:54 +01:00
SignalMedic	8179e61fdc	changed GPS buad rate to 9600 (#5786) ... Co-authored-by: Huston Hedinger <1875033+hdngr@users.noreply.github.com>	2025-01-16 17:26:02 -06:00
Tom Fifield	fd60c9b3be	Upgrade to LovyanGFX 1.2 (#5677) ... * [WIP] Attempt upgrade to LovyanGFX 1.1.16 This is the version most used by the TFT branch. I wonder if this will work with our existing code? :) * Update Portduino to LovyanGFX 1.20.0 Manuel says it's good to go. * Update unPhone platformio.ini --------- Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>	2025-01-12 15:16:26 +08:00
Eric Severance	0fe8d4ccc7	Run the AddressSanitizer during tests (#5815) ... * Run the AddressSanitizer during tests * Show details for test failures	2025-01-12 13:51:43 +08:00
DarkZeros	00fdf2c9aa	Heltec Wireless Stick Lite V1/V2 support (#5808) ... * I only have the V2.1 version, not sure if the HW is same with V1, or V2. Given the few resources I could find I think it is. * ADC / Battery measure and TX/RX are working	2025-01-12 13:17:40 +08:00
GUVWAF	6b8cf164e9	Save some flash usage on STM32WL (#5819)	2025-01-11 07:20:32 -06:00
Tom Fifield	077ee02426	Cherry-pick: Meshtab streamline and rotation fixes (#5812) ... * mesh-tab: streamline target definitions * mesh-tab: fix touch rotation 4.0 inch display * Mesh-Tab platformio: 4.0inch: increase SPI frequency to max * mesh-tab: fix rotation for 3.5 IPS capacitive display * mesh-tab: fix rotation for 3.2 IPS capacitive display --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-01-11 05:52:28 -06:00
Thomas Göttgens	25a5f178e1	remove ethernet code from this variant, remove unused radio chip code (#5810) ... * remove ethernet code from this variant, remove unused radio chip code * remove ethernet lib too, pin onewire library to release hash	2025-01-11 10:43:48 +08:00
Bernd Giesecke	2e44de262e	Add GPS capability to RAK2560 (RAKwireless WisMesh Hub) (#5797) ... * Add GPS to RAK2560 * Add GPS to RAK2560	2025-01-09 19:20:38 -06:00
Tom Fifield	e1aaafb77a	Cherrypick "add more locking for shared SPI devices (#5595) " (#5728) ... * add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * mesh-tab: lower I2C touch frequency --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>	2025-01-03 10:05:26 +08:00
Tom Fifield	fdcc0e12aa	Minor TFT branch synch (#5706)	2024-12-31 10:15:01 -06:00
Bernd Giesecke	9af8c58c40	Add Ethernet RAK13800 support to RAK11310 (#5707)	2024-12-31 13:36:49 +01:00
Thomas Göttgens	a2a6b236b7	support indicator sensors through Rp2040 serial (#5696) ... * support indicator sensors through Rp2040 serial * disable excessive debug printing	2024-12-30 21:28:31 +01:00
Tom Fifield	3c7053c66a	reference seeed indicator fix commit arduino-esp32 (#5692) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-12-29 15:23:46 +11:00
Tom Fifield	43d6b31603	TFT branch grab-bag (#5683) ... Selection of minor edits from the TFT branch that are too challenging to cherry-pick cleanly, including: * introducing the HAS_TFT flag * fixing pins in unphone * Adding pinterdevice to portduino settings	2024-12-28 08:31:54 -06:00
Ben Meadors	31a5b9c122	Cleanup and exclude external sensor macro to make T1000-E binaries much smaller	2024-12-28 08:30:53 -06:00
Tom Fifield	26a4d6c87a	Cherry-pick: Mesh-tab (#5674) ... * mesh-tab targets * update meshtab voltage divider * fix DIO1 wakeup * update mesh-tab tft configs * update mesh-tab ini * rotation fix; added ST7789 3.2" display * mesh-tab touch updates * mesh-tab: enable alert message menu * mesh-tab rotation upside-down * use MESH_TAB hardware model definition * use board definition for mesh-tab --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-12-27 05:13:45 -06:00
Tom Fifield	ed39d14c85	Remove remaining \n from log lines. (#5675)	2024-12-27 18:01:02 +11:00
Eric Severance	1281da627e	Generate a coverage report for End to end tests (#5667) ... * Generate coverage report after running tests * Wait for integration program to stop/start	2024-12-25 19:47:03 -06:00
Thomas Göttgens	57af51cc18	fix typo in nugget radio def	2024-12-24 09:04:57 +01:00
GUVWAF	f4cff33450	Portduino: specify C++ version and add link pthread (#5642)	2024-12-21 11:13:03 -06:00
Thomas Göttgens	8e6ef4ea04	add nugget and nibble boards for 38c3 (#5609) ... * add nugget and nibble boards for 38c3 * mark those boards extra for now	2024-12-21 14:57:01 +01:00
Tom	4edeca5f84	Added support for the LR1121 radio to the NRF52 Pro-Micro (#5515) ... * Added support for the LR1121 radio Added support for the LR1121 radio, tested as functional with an E80-900M2213S from CDEbyte. * Swap PNG for PDF * remove PNG * put TCXO voltage to 1.8, as in example file It worked at 1.6v, but ¯\_(ツ)_/¯ * Hopefully this will appease Trunk * Update rf switch pins and Schematic --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-12-17 10:25:37 -06:00
Tom Fifield	020e9102a8	Define BUTTON_PIN as -1 for RP2040-lora (#5574) ... The previous approach of undef'ing meant that it was impossible for users to change the button pin in the apps. Fixes https://github.com/meshtastic/firmware/issues/5566	2024-12-15 07:14:48 -06:00
Austin	6d8be13266	Portduino-buildroot: Remove pkg-config optional libs (#5573)	2024-12-14 19:19:19 -06:00
Thomas Göttgens	332dbaf573	Support TLORA_V3.0 (#5563) ... - Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector. - 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these! - update trunk to latest version	2024-12-14 10:59:15 +01:00
Austin	761a99d241	portduino-buildroot: Define c standard (#5547)	2024-12-10 18:09:54 +02:00
Austin	cf46e675ca	Add portduino-buildroot variant (#5540) ... * Add portduino-buildroot variant * Update platform-native for platform-buildroot	2024-12-10 17:14:52 +02:00
Andrew Yong	3ae85e2c82	tlora_v2_1_16: Unset BUTTON_PIN and BUTTON_NEED_PULLUP (#5535) ... Unset BUTTON_PIN and BUTTON_NEED_PULLUP as the board ships without a user button. Devices and users expecting a button on GPIO12 have to set [GPIO for user button](https://meshtastic.org/docs/configuration/radio/device/#gpio-for-user-button) to 12 (or any GPIO pin the momentary switch was connected to) to restore functionality. Signed-off-by: Andrew Yong <me@ndoo.sg>	2024-12-09 05:38:51 -06:00
Matthias Granberry	59ed5c9049	Configure Seeed Xiao S3 RX enable pin (#5517)	2024-12-08 07:32:49 +11:00
Ben Meadors	b99e57a6fa	Add popular nrf52 pro micro to the builds (#5523)	2024-12-07 07:03:58 -06:00
Ben Meadors	46eab20a90	Lets try this again minus device ui	2024-12-07 05:30:59 -06:00
Ben Meadors	39b5fb041e	Revert "Add heltec capsule back" ... This reverts commit fc16d93421.	2024-12-07 05:29:13 -06:00
Ben Meadors	fc16d93421	Add heltec capsule back	2024-12-06 20:01:47 -06:00
dylanli	85b2bad275	Refact the macro definition of GPS initialization of GPSDEFAULTD_NOT_PRESENT and added seeeed Indicator to this sequence (#5494) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-12-03 06:29:33 -06:00
dylanli	594af0cacd	Update xiao_esp32 fully support L67K (#5488) ... L67K module hardware changed	2024-12-02 10:59:34 +02:00
Ben Meadors	d5af8f0a97	Revert "Seems like the last DIY board that's not "extra" (#5420)" (#5446) ... This reverts commit e6fb6b115a.	2024-11-26 11:09:55 +08:00
Ben Meadors	6018c0a830	Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (#5436) ... Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-25 05:14:48 -06:00
Ben Meadors	f2ee0df015	Remove BMA-423 and STK8X by default (#5429) ... * Remove BMA-423 by default * STK * Wrong macro * Helps if you include the file	2024-11-23 17:18:22 -06:00
dylanli	c51a7b98bd	add canned message and keyboard in indicator board (#5410) ... * add canned message and keyboard in indicator board * Added virtual keyboard macro and enabled for Indicator * Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-22 18:54:06 -06:00
Ben Meadors	fdec95f9c1	Cherry pick tdeck fixes (#5422) ... * Try-fix (workaround) T-Deck audio crash * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * dreamcatcher: assign GPIO44 to audio mclk --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-11-22 14:25:09 -06:00
Jonathan Bennett	e6fb6b115a	Seems like the last DIY board that's not "extra" (#5420)	2024-11-22 05:32:35 -06:00
dylanli	ccfc9e5dd9	add GPS in indicator board (#5411)	2024-11-21 19:14:35 +08:00
Ben Meadors	485c371de4	Create a specific hw_model for WisMesh Tap (#5400) ... * Create a specific hw_model for WisMesh Tap * Trunk * HAS_ETHERNET * Remove it altogether * Don't need these either	2024-11-20 12:57:46 +08:00
Daniel.Cao	df1f66a6b9	Anable trace route function on wismeshtap platform (#5389)	2024-11-19 05:42:29 -06:00
GUVWAF	9545a10361	RP2040: Update core; add mDNS support (#5355) ... * Update arduino-pico core * RP2040: Add mDNS support * SimpleMDNS `begin` now returns a bool * Add `-g` option to `debug_build_flags` to link files for gdb * RAK11310 needs old platform as well * Change defines to specific architecture * Core version 4.2.1 is out	2024-11-16 08:20:20 +08:00
Ben Meadors	e65a754430	Remove board level extra from wismesh tap	2024-11-12 06:20:42 -06:00
Daniel.Cao	ff33a27789	Reduce the flash usage of wismeshtap platform (#5322) ... * Reduce the flash usage of wismeshtap platform * fix STOREFORWARD twice * Reduce the flash usage of wismeshtap platform * fix STOREFORWARD twice * add range test * Update platformio.ini remove -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1 -DMESHTASTIC_EXCLUDE_AUDIO=1 * Update platformio.ini --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-12 06:16:40 -06:00
Daniel.Cao	6eba2789d0	rak10701 (rak wismeshtap) optimization (#5280) ... * Improve the processing speed of virtual keyboards * Remove the disable GPS feature, as it would interfere with the normal use of TFT * Changed the default screen sleep time to 30s * Rename platform rak10701 -> rak wismeshtap * Fixed rak wismeshtap turned off gps caused the screen not to display * Reduce the size of the flash, otherwise uf2 will not work Co-authored-by: Daniel Cao <daniel.cao@rakwireless.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-11 13:37:43 +01:00
Ben Meadors	667b4ef0f2	Exclude some niche modules by default and populate exclude_modules (#5300) ... * Exclude some niche modules by default * Start of intelligently excluding modules --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-10 13:36:49 -06:00
Austin	286f3c6458	uClibc compatibility (#5270) ... * uclibc compatibility Adds compatibility with uclibc, the officially supported toolchain of the luckfox pico * Explicitly link stdc++fs for std::filesystem Bringing this over from buildroot-meshtastic	2024-11-07 14:23:08 +01:00
Tom Fifield	276067065e	Log cleanups (#5135) ... * Log cleanups change log levels, shorten log messages, delete commented out logs * Address comments from review * Remove full stops * EDEBUG --> DEBUG	2024-11-04 06:09:23 -06:00