* Set `hop_start` in header to determine how many hops each packet traveled
* Set hopLimit of response according to hops used by request
* Identify neighbors based on `hopStart` and `hopLimit`
* NeighborInfo: get all packets and assume a default broadcast interval
* Add fail-safe in case node in between is running modified firmware
* Add `viaMQTT` and `hopsAway` to NodeInfo
* Replace `HOP_RELIABLE` with hopStart for repeated packet
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Added WebServer/WebServices for Native Linux Meshtastic and web gui
* Fix bug in login functionality
* Added customized config of portdunio.ini with LovyannGFX from marelab repro
* Compile Problem resolved with developer version of LovyanGFX.git
* Compile against dev version
* Fixes to fit into main branch
* Update variant.h, main.cpp, .gitignore, WebServer.cpp, esp32s2.ini, WebServer.h, ContentHandler.cpp, rp2040.ini, nrf52.ini, ContentHelper.cpp, Dockerfile, ContentHandler.h, esp32.ini, stm32wl5e.ini
* Added linux pi std /usr/include dir
* Adding /usr/innclude for Linux compile against native libs that are not hadled by platformio
* Review log level changes & translation
* Update Dockerfile
* Fix Typo & VFS ref. Part1
* Fix Typo & VFS ref.
* Dev Version for ulfius web lib
* Update platformio.ini
* Free VFS path string
* Remove unintended changes
* More unintentional changes
* Make the HTTP server optional on native
* Tune-up for Native web defaults
* Don't modify build system yet
* Remove more unneeded changes
---------
Co-authored-by: marc hammermann <marchammermann@googlemail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
* GPS rework, changes for M8 and stub for M10
* Add VALSET commands for u-blox M10 receivers
* Add VALSET commands for u-blox M10 receivers
tweak M8 commands
add comments for VALSET configuration commands
* Add commands to init M10 receivers,
tweak the M8 init sequence, this is a WIP as there are still some issues during init.
Add M10 version of PMREQ.
* Add wakeup source of uartrx to PMREQ_10
The M10 does not respond to commands when asleep,
may need to do this for the M8 as well
* Enable NMEA messages on USB port.
Normally, it is a good idea to disable messages on unused ports.
Native Linux needs to be able to use GNSS modules connected via
via either serial or USB.
In the future I2C connections may be required, but are not enabled for now.
* Save the config for all u-blox receiver types.
The M10 supports this command in addition to saving using
the VALSET commands for the RAM & BBR layers.
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor EInkDisplay
A lot of variant specific code is merged, with the macros pushed to the respective variant.h files.
"Dynamic Partial" code has been purged, pending a rewrite.
* fix: declare class only if USE_EINK, init all members
* refactor: move macros to platformio.ini
Responds to https://github.com/meshtastic/firmware/pull/3299#issuecomment-1966425926
* fix: EInkDisplay::connect() references old macros
Usage was in a block of variant-specific code, which had been intentionally left untouched.
* fix: remove duplicate macros from variant.h
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add UI frame to display PaxCounter module data
* only acquire screen when paxcounter is active, i.e. enabled and wifi and ble are both off
* sync font #define with other occurrences in code
* protect screen specific code with #if HAS_SCREEN
* limit upload_speed to 115200 for TLORA_V2_1_16
* fix failing trunk checks; sorry
* Revert "limit upload_speed to 115200 for TLORA_V2_1_16"
This reverts commit 4eb549c5e8.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Experimenting with deep sleep routers / repeaters
* Make decision to SDS or LS based on Router/Repeater role
* Don't sleep LoRA on router / repeater deep sleep
* Guards
* Platform guards
* Rename method
Such that direct message to MQTT node gets published and we get rid of always rebroadcasting when MQTT is enabled
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix Heltec Tracker Screen issues
Fix Heltec Tracker Screen issues like wrong offsets, display size and screen not shutting down.
Divides board into two different envs for 1.0 and 1.1 version PCB
* Helteck wireless tracker default version V1_1
* rename heltec tracker 1.1 - trunk fmt
rename varian of heltec tracker 1.1 to "heltec tracker" to be retro-compatible.
Trunk formatting.
* Heltec Tracker increase Screen update to 3Hz
Heltec Tracker increase Screen update to 3Hz from 1Hz
