Ben Meadors
4e3fda87a1
Initial configuration.h -> variants refactor ( #1104 )
...
* Initial configuration to variants refactor
2022-01-18 18:35:42 -06:00
Erik R Norell
17dfb7d152
Touch on T-Echo to refresh e-ink screen
2022-01-07 09:57:29 +03:00
Ben Meadors
66085d7447
RAK-5005 button pin mapping tweak
2021-12-09 19:59:04 -06:00
Ben Meadors
c8bea4f091
Split RAK-4631 targets by base board
2021-12-07 20:42:06 -06:00
Османов Владислав Юрьевич
76791220b9
Fix radio module declaration for NRF52_SERIES in variant.h-files
2021-10-14 16:16:20 +03:00
Vladislav Osmanov
56dd3eab23
use common param name SX126X_ANT_SW instead of the SX1262_ANT_SW
2021-09-14 12:25:25 +03:00
Vladislav Osmanov
098f38fb83
New base class for SX126x modules. Added new SX1268 module support.
2021-09-12 00:35:16 +03:00
claes
5110a6de82
Battery sense for T-Echo
...
Copied battery stuff from RAK4631 to T-Echo
I got the voltage divider figures for T_Echo from SoftRF at
https://github.com/lyusupov/SoftRF/blob/master/software/firmware/source/SoftRF/src/platform/nRF52.h
I dont have a T-Echo so this code
HAS NOT BEEN TESTED
2021-08-10 10:07:40 +02:00
claes
32fea4cbd7
Fix for reading battery level on RAK-4631
...
Build tested on RAK4631 with battery and their solar panel box.
This is from the log:
17:40:30 102 [Power] Battery: usbPower=0, isCharging=0, batMv=4164, batPct=96
Note that mV reading and Pct is ok.
It does not detect being connected to USB and charging.
Also tested on TBEAM where it seems to be ok.
There still seems to be a problem with the FW for this board that it goes to
sleep for ever after running for a few hours.
2021-07-25 18:25:11 +02:00
Kevin Hester
c27d479a9f
t-echo: add hwmodel
2021-04-29 09:51:10 +08:00
Kevin Hester
a42bb80cf4
pinelora wip
2021-04-28 14:47:29 +08:00
Kevin Hester
2a9b2d3b29
official name for t-echo board
2021-04-27 10:21:54 +08:00
Kevin Hester
ec18efbe7e
Add beginnings of RAK4600 and update to latest nrf52 arduino sources
2021-04-15 11:45:58 +08:00
Kevin Hester
55b38a7b02
RAK4631 is almost feature complete
2021-04-12 13:25:55 +08:00
Kevin Hester
7224782d23
rak4631: gps now works
2021-04-11 15:17:56 +08:00
Kevin Hester
f7d199a3be
rak4631: kinda runs
2021-04-11 13:58:48 +08:00
Kevin Hester
328b24537f
rak4631: builds but WIP
2021-04-11 13:33:27 +08:00
Vadim Furman
d3cbc8ea78
WIRE_INTERFACES_COUNT -> NO_WIRE
2021-03-19 18:46:11 -07:00
Vadim Furman
b6e197371d
Removed SX1262_USE_DIO3_FOR_TCXO
2021-03-19 18:30:00 -07:00
Vadim Furman
0c51cc3738
Fix hardware model
2021-03-17 10:56:45 -07:00
Vadim Furman
ddcfff3b59
Fixed compilation on nrf52 and brownout code
2021-03-17 10:44:42 -07:00
Vadim Furman
c62863b1dc
Merge from origin
2021-03-14 19:42:57 -07:00
Vadim Furman
98d878cdfe
Port to lora_isp4520 board
2021-03-14 19:00:20 -07:00
Kevin Hester
6e37fe6343
turn radio back on
2021-03-10 15:24:00 +08:00
Kevin Hester
5835abbcf6
fix eink leds
2021-03-09 15:06:28 +08:00
Kevin Hester
6a593e01e1
notes on eink1.0
2021-01-28 10:30:24 +08:00
Kevin Hester
d1f0be215b
eink leds seem a bit busted
2021-01-16 11:42:06 +08:00
Kevin Hester
f110225173
Update variant file and qspi flash programming settings for new ttgoeink
...
Note: bin/qspi-flash-test.sh contains a script you can use for basic
bench programming and testing of the serial spi flash over SWD
2021-01-16 10:34:46 +08:00
Kevin Hester
51d0d0d6c5
begin new ttgo eink board
2021-01-16 09:57:55 +08:00
Kevin Hester
047df76373
move rev 0.1 of the ttgo eink board to eink0.1
2021-01-16 09:55:06 +08:00
Kevin Hester
ad8bcba5ef
remove hack for the othernet ppr1 rev 1 board
2020-12-13 11:54:00 +08:00
Kevin Hester
67e657f10f
always print debug output to both serial and segger debug port
...
cc @mc-hamster, this makes USE_SEGGER optional on nrf52 targets
2020-11-13 07:48:25 +08:00
Kevin Hester
bbc36f7b6f
switch to my new SD 7.2.0 S113 based bootloader
2020-10-31 12:22:20 +08:00
Kevin Hester
4ad562b9f4
The new 7.2.0 soft device works on nrf52833
2020-10-28 13:01:50 +08:00
Kevin Hester
1a8891c33d
ppr1: add crude version of charge controller driver
2020-10-24 18:40:47 +08:00
Kevin Hester
f0eeaf01d4
ppr1 lcd is 'good enough' for now
2020-10-24 09:49:14 +08:00
Kevin Hester
0767c8be03
PPR1 fix screen mirroring on LCD
2020-10-24 08:16:15 +08:00
Kevin Hester
b081a6da56
ppr1 st7567 lcd kinda works now
2020-10-23 18:00:43 +08:00
Kevin Hester
a102e49fdb
PPR1 WIP - hacky code to make LCD talk on I2C. Works!
2020-10-23 17:10:48 +08:00
Kevin Hester
e1f0e11cb8
ppr1 WIP DO NOT MERGE - will break other clients
2020-10-17 13:15:12 +08:00
Kevin Hester
22f23bb07d
Merge branch 'dev' into ppr1
...
# Conflicts:
# src/gps/NMEAGPS.cpp
2020-10-16 15:59:55 +08:00
Kevin Hester
9134faaed1
turn off segger debug in ttgo eink build
2020-10-15 16:11:40 +08:00
Kevin Hester
5f2f3c94b9
PPR1 and allow boards to set lower or higher sx1262 power limits
2020-10-15 13:47:10 +08:00
Kevin Hester
ca77d48b20
corvus2 gps still doesn't work WIP
2020-10-13 14:43:28 +08:00
Kevin Hester
965c2bda8d
corvus2 board builds
2020-10-13 13:59:06 +08:00
geeksville
124a82888d
add power testing notes for eink
2020-09-28 17:38:36 -07:00
geeksville
fec7a6bf17
add air530 gps sleep support
2020-09-28 17:04:19 -07:00
geeksville
bc50b39a3b
put eink screen to sleep to save power
2020-09-28 16:08:52 -07:00
geeksville
116fe6d109
eink bootloader finished
2020-09-28 15:18:32 -07:00
geeksville
6a4ef7e1d1
eink board serial flash seems to work
2020-09-28 14:10:33 -07:00
geeksville
a0fd83428f
eink use RESET button as regular button instead
2020-09-28 13:10:27 -07:00
geeksville
e5d4fbb164
fix pins per email eink
2020-09-28 13:03:54 -07:00
geeksville
28ec0e310d
make bat voltage sensing work on eink
2020-09-26 18:13:16 -07:00
geeksville
266ba03bb7
route debug output back to the CDC-ACM device instead of JLINK
2020-09-26 13:49:22 -07:00
geeksville
db33200468
remove more stale eink code
2020-09-26 12:51:05 -07:00
geeksville
d7fbcf89bf
cleanup todo eink now ready to merge
2020-09-26 12:36:11 -07:00
geeksville
a8b1bc735a
remove debugging code eink gps now works
2020-09-26 12:12:50 -07:00
geeksville
ba8c640d6e
eink leds kinda work now
2020-09-26 10:53:02 -07:00
geeksville
d88d2780f4
eink display now kinda works
2020-09-26 09:40:48 -07:00
geeksville
b0bbf95b03
LORA now works on the eink board (new schematic from ttgo)
2020-09-26 07:25:32 -07:00
geeksville
772d045166
more eink notes
2020-09-25 10:41:27 -07:00
geeksville
6f77244af3
eink wip notes
2020-09-25 09:14:00 -07:00
geeksville
a79aff4778
WIP - I think some pins are wrong, waiting for new schematic
2020-09-24 16:36:07 -07:00
geeksville
5fbeaee0b0
eink kinda builds
2020-09-24 14:36:43 -07:00
geeksville
f1ca1ee3c0
okay basic support for @bigcorvus board is done
2020-08-29 12:46:42 -07:00
geeksville
dffb6c2f06
If display is on on the @BigCorvus board and we xmit the board browns out?
2020-08-28 17:38:23 -07:00
geeksville
7f214ffbb0
TFT kinda correct now - but slow because of bit banging
2020-08-28 15:33:33 -07:00
geeksville
d91ab5480f
begin support for TFT displays
2020-08-17 13:47:05 -07:00
geeksville
781077e799
Turn on buck converter for @BigCorvus board, now radio works
2020-08-17 11:42:19 -07:00
geeksville
22946b5e51
@BigCorvus board now kinda boots
...
###RTT Client: -----------------------------------------------
###RTT Client: Connecting to J-Link RTT Server via localhost:19021 ...
###RTT Client: Connected.
SEGGER J-Link V6.70c - Real time terminal output
SEGGER J-Link ARM V9.6, SN=69663845
Process: JLinkGDBServerCLExe
Emitting reboot packet for serial shell
I2C device found at address 0x55
done
Meshtastic swver=unset, hwver=unset
Reset reason: 0x0
FIXME, call randomSeed
ERROR: No UBLOX GPS found
Hoping that NEMA might work
RadioConfig reset!
Initial packet id 1481765933, numPacketId 4294967295
No saved preferences found
NODENUM=0xB18C3A4E, dbsize=1
Starting meshradio init...
Set radio: name=Default, config=3, ch=6, power=17
SX1262 init result 0
sending owner !df5db18c3a4e/Unknown 3a4e/?4E
Update DB node 0xB18C3A4E, rx_time=0
old user !df5db18c3a4e/Unknown 3a4e/?4E
updating changed=0 user !df5db18c3a4e/Unknown 3a4e/?4E
Adding packet record (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 Payload:User)
enqueuing for send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
txGood=0,rxGood=0,rxBad=0
Starting low level send (id=0x5851F430 Fr0x4E To0xFF, WantAck0, HopLim3 encrypted)
assert failed src/mesh/SX1262Interface.cpp: 102, virtual void SX1262Interface::setStandby(), test=err == ERR_NONE
2020-08-17 11:29:00 -07:00
geeksville
6b568ab2fb
add powerhold for @bigcorvus board
2020-08-16 14:50:04 -07:00
geeksville
67bad9a689
Add SX1262 to @BigCorvus board
2020-08-16 14:20:05 -07:00
geeksville
559a790286
Add @BigCorvus board support to build
2020-08-16 14:08:31 -07:00
geeksville
08e5bd728b
lorarelay wip
2020-08-16 14:07:01 -07:00
geeksville
0cfeeba2e2
add variant files by @BigCorvus
2020-08-16 13:25:24 -07:00
geeksville
cb1053850d
Oops - I mismerged at somepoint, restore correct PPR variant.h defs
2020-08-03 11:05:24 -07:00
geeksville
acbe8c159b
move rak815 variant to arduino repo
2020-07-10 12:38:11 -07:00
geeksville
5b07d454b1
WIP RAK815 now builds correctly
2020-07-10 11:29:32 -07:00
geeksville
b00a936f41
WIP RAK815 support
2020-07-10 11:02:29 -07:00
geeksville
477c62082d
E22 SX1262 module now works!
...
Thanks mostly to an old github comment by @beegee-tokyo the fix was easy
(comment here https://github.com/jgromes/RadioLib/issues/12#issuecomment-520450429 )
We now set DIO3 to 2.4 volts to power the oscillator inside the E22
module (undocumented in the E22 docs)
2020-06-15 14:38:09 -07:00
geeksville
4b5cfaf9ba
changes from bringing up PPR
2020-06-05 11:00:18 -07:00
geeksville
c12fb69ca2
update protos
2020-05-10 14:17:05 -07:00
geeksville
8b911aba7f
Cleanup build for NRF52 targets
2020-05-10 12:33:17 -07:00
geeksville
814c126e67
ugly WIP on switching to RadioLib, still need to set freq etc...
2020-04-29 14:54:03 -07:00
geeksville
a7d153abcb
CUSTOM GPIOs the SX1262MB2CAS shield when installed on the NRF52840-DK development board
2020-04-29 12:57:34 -07:00
geeksville
b8b503cb0a
Add starting point of PPR variants definition
2020-04-24 12:40:22 -07:00
geeksville
bb885a5110
add a variant based on the nrf52840-dk but with a RC clock.
...
Because I was dumb and accidentally ran some code that configured gpio 0
as an output and that was enough to smoke the xtal that was preinstalled
between P0.0 and P0.1.
2020-04-24 12:30:06 -07:00
