github-actions[bot]
27f0e42d2f
[create-pull-request] automated change ( #3708 )
...
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
2024-04-23 13:32:33 -05:00
todd-herbert
4599534616
Terminate an async-full-refresh when caught by determineMode() instead of onNotify() ( #3706 )
2024-04-23 12:00:48 -05:00
Tom Fifield
7acaec8ef5
Add power limit for TW region ( #3701 )
...
The TW region had now power limit set, so defaulted to 16dBm.
The relevant regulation is section 5.8.1 of the Low-power Radio-frequency Devices Technical Regulations, which notes the limits of 0.5W (27dBM) indoor or coastal, 1.0W (30dBM) outdoor.
This patch updates the power limit to 27dbM, using the the lower limit specified in the regulations to be conservative.
Regulation references:
https://www.ncc.gov.tw/english/files/23070/102_5190_230703_1_doc_C.PDF (latest English version)
https://gazette.nat.gov.tw/egFront/e_detail.do?metaid=147283 (latest Chinese version, February 2024)
2024-04-23 07:11:22 -05:00
Nicholas Baddorf
d0e81b9151
Fixed node and channel selection for t-deck ( #3695 )
...
This enables the node and channel selection to be accessed by pressing the tab shortcut and then swiping between nodes or pressing tab again to change channels.
(To access the tab function look at my other pull request https://github.com/meshtastic/firmware/pull/3668 )
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-23 07:09:26 -05:00
Thomas Göttgens
c6e940af81
Merge branch 'master' into RCWL-9620
2024-04-23 14:04:22 +02:00
Gareth Coleman
ec2b854ea2
oops missed the extern enabling little chap
2024-04-22 14:44:59 +01:00
Gareth Coleman
378a2d723e
Merge branch 'RGBLED' of github.com:garethhcoleman/firmware into RGBLED
2024-04-22 14:43:07 +01:00
Gareth Coleman
5dd08e9533
added NeoPixel support using Adafruit library
2024-04-22 14:42:52 +01:00
Gareth Coleman
125add9792
Merge branch 'master' into RGBLED
2024-04-22 14:42:14 +01:00
Andrew Yong
250cf16bf8
Add ability to turn off heartbeat LED blinking ( #3674 )
...
* Add ability to turn off status LED blinking
Fixes #3635 and depends on [protobufs PR #485 ](https://github.com/meshtastic/protobufs/pull/485 )
Signed-off-by: Andrew Yong <me@ndoo.sg>
* led_heartbeat_disabled
* trunk
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-22 08:21:50 -05:00
David Ellefsen
30d4c3a945
Updates for esp32s2 build
2024-04-22 11:01:13 +02:00
Gareth Coleman
45fd5e25ac
Merge branch 'master' into RGBLED
2024-04-22 09:15:44 +01:00
Thomas Göttgens
f47b40cf68
fix signedness warnings of NRF52 toolchain
2024-04-22 09:49:06 +02:00
Ben Meadors
84edaabfe9
Merge branch 'master' into RGBLED
2024-04-21 14:46:18 -05:00
Ben Meadors
048f0a1601
Merge branch 'master' into RCWL-9620
2024-04-21 14:41:49 -05:00
Nicholas Baddorf
4a48a3fb52
Fixed bug making t-deck reboot when muted ( #3694 )
2024-04-21 14:41:22 -05:00
Ben Meadors
39bbf0d352
Added more clear RTC handling and quality logging ( #3691 )
...
* Also refresh timestamp for "timeonly" fixed position nodes
* Added more clear RTC quality handling
* Fix clock drift from Phone GPS / NTP too
2024-04-21 14:40:47 -05:00
Ben Meadors
675d8fe089
Merge branch 'master' into RCWL-9620
2024-04-21 12:37:38 -05:00
Mictronics
0406be82d2
Use correct format specifier and fixed typo. ( #3696 )
...
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28
* Merge PR #420
* Fixed double and missing Default class.
* Use correct format specifier and fixed typo.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-21 12:36:37 -05:00
Ric In New Mexico
679e068e19
Missing break in INA3221 i2c scan ( #3692 )
...
* INA3221 Mis-identification fix
* Missing break in INA3221 i2c scan
2024-04-21 12:35:42 -05:00
Thomas Göttgens
952393ca0f
Merge branch 'master' into RCWL-9620
2024-04-21 18:34:40 +02:00
Thomas Göttgens
a231cd2ad0
derp...
2024-04-21 16:35:41 +02:00
Ben Meadors
ac87c0065f
Also refresh timestamp for "timeonly" fixed position nodes ( #3689 )
2024-04-21 08:45:36 -05:00
S5NC
9822a85274
Add board and variant definitions for EBYTE_ESP32-S3 ( #2882 )
...
* Create ESP32-S3-WROOM-1-N4.json
* Create pins_arduino.h
* Create platformio.ini
* Create variant.h
* Update mesh.pb.h
* Update architecture.h
* Update mesh.pb.h
* Update variant.h
* Update variant.h
Add example schematic
* Update architecture.h
* Revert update architecture.h
* Create variant.h
* Create pins_arduino.h
* Create platformio.ini
* Delete variants/E22-900M_S3 directory
* Update architecture.h
* Update variant.h
* Update platformio.ini
* Update variant.h
* Update variant.h
* Update architecture.h
* Update platformio.ini
* Update architecture.h
* Update ESP32-S3-WROOM-1-N4.json
* Update platformio.ini
* Update ESP32-S3-WROOM-1-N4.json
* Update variant.h
* Update variant.h
* Update variant.h
* Update variant.h
* Update pins_arduino.h
* Update architecture.h
* add SX1268 allow
* GPS
* Commit
* Whitespace
* Update variant.h
* Update variant.h
* trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: S5NC <>
2024-04-21 08:40:23 -05:00
Thomas Göttgens
a957065fe8
Merge branch 'master' into RCWL-9620
2024-04-21 14:47:29 +02:00
Ben Meadors
41f3557491
Refactor smart position to use throttle helper ( #3671 )
...
* Added one minute throttling to NodeDB
* Derp
* Refactor smart-position to use throttle
2024-04-21 07:42:36 -05:00
Thomas Göttgens
402b0d7e0b
ditch that no-good m5 dependancy and do it ourself
2024-04-21 14:39:55 +02:00
Ben Meadors
1dd19cec6e
Merge branch 'master' into RCWL-9620
2024-04-21 07:34:11 -05:00
Ben Meadors
df718ab294
Merge branch 'master' into RGBLED
2024-04-21 07:31:54 -05:00
todd-herbert
dfc43bae18
Fix crash on shutdown, if Bluetooth not enabled ( #3686 )
...
Previously attempted to call deinit method for a nullptr
2024-04-21 07:25:58 -05:00
todd-herbert
f6cfdfe881
(ESP-32S) Fix "critical error 3" after deep-sleep ( #3685 )
2024-04-21 07:25:12 -05:00
S5NC
820c5dc8c5
Update architecture.h ( #3688 )
2024-04-21 07:24:39 -05:00
Thomas Göttgens
5218aaafcf
Change name
2024-04-21 11:41:52 +02:00
Thomas Göttgens
c480f0870c
Support radar sensor RCWL-9620 on i2c
2024-04-21 11:41:52 +02:00
Gareth Coleman
9e4ef92e6d
lets just define it without guards!
2024-04-21 09:16:50 +01:00
Gareth Coleman
cf65661c7c
another silly error
2024-04-21 08:59:40 +01:00
Gareth Coleman
fb7a878d94
tweaked guards to allow various combinations of RGB leds
2024-04-21 08:24:51 +01:00
github-actions[bot]
e72792afc8
[create-pull-request] automated change ( #3683 )
...
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
2024-04-20 15:58:42 -05:00
Ric In New Mexico
ec39e1136a
INA3221 Mis-identification fix ( #3681 )
2024-04-20 15:58:21 -05:00
caveman99
0972a8dccb
[create-pull-request] automated change
2024-04-20 18:24:40 +00:00
github-actions[bot]
419eb13968
[create-pull-request] automated change ( #3679 )
...
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
2024-04-20 09:56:55 -05:00
github-actions[bot]
e7828c4c64
[create-pull-request] automated change ( #3676 )
...
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
2024-04-20 07:36:53 -05:00
Manuel
44aa248099
added new display parameters ( #3670 )
2024-04-19 19:27:13 -05:00
Gareth Coleman
e0513d4078
ahem, another minor edit to have another go at CI
2024-04-19 09:27:10 +01:00
Gareth Coleman
2100f3135e
minor edit to have another go at CI
2024-04-19 09:25:38 +01:00
Gareth Coleman
2f36d4990e
Merge branch 'master' into RGBLED
2024-04-19 08:12:13 +01:00
github-actions[bot]
7a3570aecf
[create-pull-request] automated change ( #3662 )
...
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
2024-04-18 18:29:50 -05:00
Gareth Coleman
4a471ded79
Merge branch 'RGBLED' of github.com:garethhcoleman/firmware into RGBLED
2024-04-19 00:28:39 +01:00
Gareth Coleman
eea85d26ca
oh god the bugs, they are everywhere, I feel so dirty...
2024-04-19 00:28:20 +01:00
GUVWAF
64edfb76e0
Uplink to MQTT after potentially altering content ( #3646 )
...
Mainly for traceroute module now
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-18 17:44:13 -05:00
Gareth Coleman
8ac308e73b
Merge branch 'master' into RGBLED
2024-04-18 23:12:08 +01:00
Gareth Coleman
0ae7674982
I'm sure there's a cleverer way to do this, but I'm stupid and I didn't find it after a few minutes of searching stack overflow
2024-04-18 22:18:50 +01:00
GUVWAF
e4b5f2ce14
NeighborInfo: Only keep neighbors in RAM ( #3660 )
...
* NeighborInfo: Only keep neighbors in RAM
It fills up quickly when nodes are running >=2.3
* Defer first transmission as it's usually empty
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-18 16:16:50 -05:00
Gareth Coleman
7d77b23eb6
support for generic 4 pin CC and CA RGB LEDS
2024-04-18 22:00:33 +01:00
Gareth Coleman
a149999cec
tidy up first
2024-04-18 20:57:03 +01:00
Ben Meadors
78d915b454
Merge branch 'master' into RGBLED
2024-04-18 14:44:53 -05:00
GUVWAF
4c0b7ea409
StoreForward: Remove assert when receiving unhandled case ( #3661 )
2024-04-18 14:28:11 -05:00
Ben Meadors
425a715995
Added one minute throttling to NodeDB save to disk ( #3648 )
...
* Added one minute throttling to NodeDB
* Derp
2024-04-18 14:20:39 -05:00
Ben Meadors
2e13aeeacb
Merge branch 'master' into RGBLED
2024-04-18 07:32:25 -05:00
todd-herbert
747c713ba9
(ESP32) Fix bluetooth after light-sleep; de-init for deep sleep ( #3655 )
2024-04-18 07:27:18 -05:00
Gareth Coleman
4b5549be8f
added vibration notifications
2024-04-18 09:22:31 +01:00
Gareth Coleman
172d271b0b
Merge branch 'master' into RGBLED
2024-04-18 07:11:49 +01:00
Jonathan Bennett
d47e9bed19
Add multiple SPI devices for Radio, Display, and Touchscreen ( #3638 )
...
This changeset gives us the ability to specify a separate SPI device for the LoRa, Display, and Touchscreen. The changes in Portduino also add support for specifying a new SPI speed for each transaction. All together, this means that we can let the Linux OS manage the CS lines, and also get much faster SPI speeds, leading to better framerates.
* Add multiple SPI devices to put Radio, Display, and Touchscreen on each their own
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-17 14:25:52 -05:00
GUVWAF
bc085ab840
Fix #3641 : Always set MAC when picking new NodeNum ( #3651 )
...
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-17 07:07:40 -05:00
Ben Meadors
2450031b1b
Add device metrics uptime to MQTT JSON ( #3643 )
...
* Add device metrics uptime to MQTT JSON
* Cast a spell
2024-04-17 07:00:18 -05:00
Ben Meadors
2cd877d2eb
Merge branch 'master' into RGBLED
2024-04-16 20:37:02 -05:00
GUVWAF
c34956e9d8
Cosmetics: rename remaining plugins → modules and less errors ( #3645 )
2024-04-16 17:47:56 -05:00
Gareth Coleman
afb4de21d9
yet another random edit, think i'm brushing the touchpad or perhaps my computer is possessed by the devil determined to make me look foolish
2024-04-16 22:37:57 +01:00
Gareth Coleman
86223d8806
Merge branch 'RGBLED' of github.com:garethhcoleman/firmware into RGBLED
2024-04-16 21:41:57 +01:00
Gareth Coleman
0632b96fcb
just tiny tweak to minimise changes
2024-04-16 21:40:13 +01:00
Gareth Coleman
dcfc9c9f03
Merge branch 'meshtastic:master' into RGBLED
2024-04-16 21:29:12 +01:00
Gareth Coleman
8a3322fbcb
rgb led support for unPhone
2024-04-16 21:28:12 +01:00
David Ellefsen
55c9c3b298
Support for the ATGM336H series of GPS modules ( #3610 )
...
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-16 09:03:51 -05:00
Andrew Yong
9599549477
Add configuration option for LoRa Region Code override for region-locked builds/variants ( #3540 )
...
The main use case for this will be to create a custom Heltec WiFi LoRa 32 V3 SG_923 variant, which will be pre-flashed and sent for regulatory approval for retail sale.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-16 09:03:36 -05:00
S5NC
e813703bf5
Add support for CDEBYTE_EoRa-S3 ( #3613 )
...
* Create CDEBYTE_EoRa-S3.json
* Update CDEBYTE_EoRa-S3.json
* Update architecture.h
* Create variant.h
* Create platformio.ini
* Create pins_arduino.h
* Update variant.h
* Update variant.h
* Update variant.h
* Trunk format
* update variant.h
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: S5NC <>
2024-04-16 09:00:16 -05:00
github-actions[bot]
699ea74672
[create-pull-request] automated change ( #3642 )
...
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
2024-04-16 08:01:32 -05:00
todd-herbert
a01069a549
No more printing power-state changes to screen ( #3640 )
2024-04-16 07:36:14 -05:00
Gareth Coleman
3413b9da41
Fixed XPT2046 syntax and using unPhone library to clean up support ( #3631 )
...
* Fixed XPT2046 syntax and using unPhone library to clean up main and TFTDisplay.
* strange extra edits removed wtf
2024-04-16 07:29:08 -05:00
Ben Meadors
2f9b68e08b
File management changes (Part 2 - Reboot instead of reformat NRF52 after two failed file saves) ( #3630 )
...
* Add LoadFileState to differentiate types of success / failures
* Try rebooting NRF52s with multiple failed saves
* Trunkate
2024-04-15 16:36:22 -05:00
Ben Meadors
27ae4399bc
Zero hop always for connected node ( #3634 )
2024-04-15 16:35:52 -05:00
Gareth Coleman
385d7296fe
strange extra edits removed wtf
2024-04-15 17:37:39 +01:00
Gareth Coleman
d1cd686644
Fixed XPT2046 syntax and using unPhone library to clean up main and TFTDisplay.
2024-04-15 17:24:08 +01:00
Gareth Coleman
1291da746b
Support for alt I2C address for LSM6DS3 sensor, identification of TCA9555 IO Expander, resolve serial hang issue ( #3622 )
...
* basic identification of TCA9555
* recognise LSM6DS3 on alt address
* keep variant.h changes out of this PR
* 2nd attempt to keep variant.h changes out of this PR
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-15 07:30:45 -05:00
Ben Meadors
2803fa964e
Add LoadFileState to differentiate types of success / failures ( #3625 )
2024-04-15 07:22:05 -05:00
todd-herbert
1d97544041
Wireless Paper: Fix BLE after Lightsleep ( #3629 )
...
* NimBLE deinit for deep-sleep only
* Optionally disable blink during light-sleep
* Advised to revert "blink disable"
This reverts commit 66347ce19b
2024-04-15 06:50:42 -05:00
Jonathan Bennett
5b52c31a76
Fix HAS_WIRE logic in main
2024-04-14 16:44:28 -05:00
Jonathan Bennett
00d4c011c7
Fix sx126x error log logic
2024-04-14 16:44:28 -05:00
Jonathan Bennett
1447148811
Make sure settingsStrings get initialized
2024-04-14 16:44:28 -05:00
Ben Meadors
4f205718f0
Device telemetry uptime in seconds ( #3614 )
2024-04-14 10:27:01 -05:00
Manuel
5047468d9f
fix/enhancement: TFT device powersave (part 3) ( #3600 )
...
* fix: device TFT powersave (part 3)
* trunk fmt
* trunk fmt
* undo bluetooth deinit from #3596
* revert code for heltec tracker
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-14 09:11:27 -05:00
Manuel
ec3971bce5
fix upDown ISR ( #3612 )
2024-04-14 08:11:22 -05:00
Jonathan Bennett
0a246bfe9b
Add more useful error output in radio interfaces ( #3615 )
...
* Add more useful error output in radio interfaces
* trunk
2024-04-14 00:29:42 -05:00
Ben Meadors
2a6e26620e
Auto-favorite our node ( #3609 )
2024-04-12 20:17:25 -05:00
Jonathan Bennett
3f45c2d4f0
Fix another LOG_DEBUG message that should be LOG_ERROR ( #3607 )
2024-04-12 14:14:56 -05:00
Jonathan Bennett
11adfe05ce
Drop unishox2 functions from Router ( #3606 )
2024-04-12 14:06:05 -05:00
Manuel
4c9646f7d9
fix: device sleep (part 1) ( #3590 )
...
* fix sleep part 1
* always show wakeup reason in debug log
* fix screen turn on issue
* avoid unnecessary reboot when entering light sleep
* set DIO1 based on radio type
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-12 10:01:24 -05:00
todd-herbert
178877f2d9
Enable T-Echo touch button by default ( #3604 )
...
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-12 07:18:36 -05:00
Gareth Coleman
f4a2023dba
LSM6DS3TR-C support ( #3593 )
...
* started work on pulling in the unphone library and dependencies, to do e.g. power switch management and etc.; currently failing at Adafruit_ImageReader
* now compiles with unphoneLibrary included
* successfully pulled in unphone library to manage power switch and init vibe motor and etc.
doesnt print to serial tho...
* simplified the build a bit; when doing meshtastic do not depend on the MCCI lora libs etc., then also no need to config them via build flags
* version that doesnt trigger brownout
* cleaned up initVariant a little
* note re. GPS
* back to mesh upstream version
* this time we're back to mesh upstream version
* getting LSM6DS3TRC driver installed
* shake to wake works, set threshold quite low may need increasing
* whats the crack with these end of file changes?
* paramatize the wake threshold
* try to get the PR to just include real changes
* got the right config item and also not giving compiler messages
* moved the lib_deps for the LSM6DS3TRC driver from our variant platformio.ini to the main one in root so all boards have it
* stuupid error #define-ing
---------
Co-authored-by: Hamish Cunningham <hamish@gate.ac.uk>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-04-11 19:40:14 -05:00
Manuel
927d07e2c6
fix: device PMU shutdown (part 2) ( #3596 )
...
* fix: device PMU shutdown (part 2)
* fix error + enable nimble deinit
2024-04-11 19:39:07 -05:00
github-actions[bot]
a4a8556aa2
[create-pull-request] automated change ( #3595 )
...
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
2024-04-11 07:41:37 -05:00
