* Fix GPS that hard code 2080 as the start time.
Some GPS chips, such as the AG3335 in T1000e and L96 have a hardcoded
time of 2080-01-05 when they start up.
To fix that in a way that seems permanent, let's ignore times that
are more than 40 years since the firmware was built. We should followup
in late 2039 to see if any changes are needed.
Reported-By: @b8b8
* Update src/gps/RTC.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Put FORTY_YEARS in header and use in both places.
* Restore Ben's nicer log lines.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Further to https://github.com/meshtastic/firmware/pull/7772 ,
we discovered that some RTCs have hard-coded start times well in the
past.
This patch gives RTCs the same treatment as GPS - if the time is
earlier than BUILD_EPOCH, we don't use it.
Fixes#7771Fixes#7750
We have two perhapsSetRTC functions, which are called to set the time.
The one with 3 parameters had a helpful check to reject an invalid time,
by comparing the time from the source against when the firmware was compiled.
The one with 2 parameters, which is called from the GPS lookForTime did not.
As a result, certain GPS with bad time handling could set a time that was
in the past.
This patch adds the same epoch check code to the other perhapsSetRTC method.
Fixes https://github.com/meshtastic/firmware/issues/7364
* Update platformio inis for stm32 platform and wio-e5 variant for enabling i2c
* Don't reference timezone functions if MESHTASTIC_EXCLUDE_TZ is defined
* Use custom pow_of_two in RadioInterface instead of floating-point pow()
* First pass: enable sensors for STM32wL
* Fix AirQualityTelemetryModule being created if the PM25AQI header is missing
* Link in power sensor libraries
* more ini tweaks
* Add =1 to EXCLUDE defines, fix indentation.
* Drop HAS_WIRE in ini, it's defined in architecture.h
* Fix build when power sensor libraries are missing
Make MAX sensor integration into Power.cpp optional based on its library header existing.
Also make NullSensor expose a voltage and current sensor, because Power calls directly into these for INA sensors.
This lets us remove all the deps for the STM32WL platform.
* Change default I2C for RAK3172 to be I2C1, not I2C2
* Respect the laws of mathematics (oops)
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor and consolidate windowing logic
* Trunk
* Fixes
* More
* Fix braces and remove unused now variables.
There was a brace in src/mesh/RadioLibInterface.cpp that was breaking
compile on some architectures.
Additionally, there were some brace errors in
src/modules/Telemetry/AirQualityTelemetry.cpp
src/modules/Telemetry/EnvironmentTelemetry.cpp
src/mesh/wifi/WiFiAPClient.cpp
Move throttle include in WifiAPClient.cpp to top.
Add Default.h to sleep.cpp
rest of files just remove unused now variables.
* Remove a couple more meows
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Guard against timesources from the mesh if we have good time
* Trunk
* Consider phone time in the past 24 hours authoritative as well
* Rename
* GPS can be null
* Declaration
* Remove RemoteHardware
* Explicitly remove GPS
* Exclude GPS earlier for RAK2560
* Fix time lost on the Pico W right after NTP
Shouldn't check for `#ifdef` as it will always be defined, but might be set to 0
* Handle reconnect for Wi-Fi on RP2040
* Update arduino-core for Wi-Fi + FreeRTOS fixes
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor GPS to not probe if pins not defined
* Use Named Constructor to clean up code
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
* Cleanup and remove dead code
* Rename GPS_PIN_WAKE to GPS_PIN_STANDBY
* Actually put GPS to sleep between fixes
* add GPS_POWER_TOGGLE for heltec-tracker and t-deck
* Change GPS_THREAD_INTERVAL to 200 ms
* More dead code, compiler warnings, and add returns
* Add Number of sats to log output
* Add pgs enable and triple-click config
* Track average GPS fix time to judge low-power time
* Feed PositionModule on GPS fix
* Don't turn off the 3v3_s line on RAK4631
when the rotary is present.
* Add GPS power standbyOnly option
* Delay setting time currentQuality
to avoid strange log message.
* Typos, comments, and remove unused variable
* Short-circuit the setAwake logic on GPS disable
* heltec-tracker 0.3 GPS power saving
* set en_gpio to defined state
* Fix fixed_position logic with GPS disabled
* Don't process GPS serial when not isAwake
* Add quirk for Heltec Tracker GPS powersave
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* Break i2cScan out into a set of classes for scanning i2c
* refactor i2cscan addresses to be structs that allow addressing by port + address
* build whoopsies
* trunk fmt
* trunk fmt
* lost some build fixes from the merge
* more cleaning for build safety, RTC behavior
* lay groundwork for a possible future architecture
* switch from feature opt-out to feature opt-in
* lay groundwork for a possible future architecture
* switch from feature opt-out to feature opt-in
* fix USE_RTC in variant.h for rak4631_epaper and t-echo
* ensure Screen.h is not included without configuration.h
Co-authored-by: Peter Lawrence <12226419+majbthrd@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
