10578 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Clive Blackledge	fb08e17c39	Increase bluetooth 5.0 PHY speed and MTU on esp32_s3 (#8261) ... * Increase Bluetooth speed to 2MB, increase MTU * Adding esp32c6 * trunk fmt..	2025-10-12 05:35:00 -05:00
Tom Fifield	11aff46af1	Remove T1000E GPS startup delay sequence (#8236) ... 8 months ago, when this was added to the code, the GPS probe code was still a little flaky. Particularly after #6114 and #6116 were added, reliability improved for all devices as we were sending fewer calls on the bus. Today, the T1000E is the only Meshtastic device that regularly takes 2, 3, or 4 attempts to be detected via the probe code. Removing these lines, on my T1000E, results in the AG3335 being detected immediately. Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-12 05:34:34 -05:00
Jonathan Bennett	464663b496	GPS_POWER_TOGGLE no longer has a function, so purge (#8312)	2025-10-12 05:33:34 -05:00
Austin	981d058e9f	Actions: CI docker with a fancy matrix (#8253)	2025-10-11 15:56:59 -05:00
Ben Meadors	9056915e7b	Double the number of bluetooth bonds NimBLE will store (from 3 to 6) (#8296)	2025-10-11 11:31:42 -05:00
thebentern	554112ceb5	Automated version bumps	2025-10-11 11:31:42 -05:00
renovate[bot]	29458cd8c4	Update XPowersLib to v0.3.1 (#8303) ... Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-10-11 11:31:42 -05:00
Jonathan Bennett	8bf32dc042	Attach an interrupt to EXT_PWR_DETECT if present, and force a screen redraw on a power change.	2025-10-11 11:31:42 -05:00
Ben Meadors	73cadce581	Fix BLE stateful issues (#8287)	2025-10-11 11:31:42 -05:00
renovate[bot]	eee80ce636	chore(deps): update github/codeql-action action to v4 (#8250) ... Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-10-11 11:31:42 -05:00
Tom Fifield	30d6962e79	Fix Station G2 Lora Power Settings (#8273) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * Fix Station G2 Lora Power Settings In #8107 we introduced the ability to specify gain values for non-linear power amplifiers. This patch adds appropriate values for the Station G2, based on the table at https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test Fixes https://github.com/meshtastic/firmware/issues/7239 --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-11 11:31:42 -05:00
Ben Meadors	f99747180e	NimBLE speedup (#8281) ... * Remove status polling code in NimBLE * Goober --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-11 11:31:42 -05:00
renovate[bot]	91d928d4c5	Update meshtastic/device-ui digest to 6d8cc22 (#8275) ... Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-10-11 11:31:42 -05:00
Andrew Yong	64bfe73c06	fix: Move #include "variant.h" to top of file (fixes #8276) (#8278) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * fix: Move `#include "variant.h"` to top of file (fixes #8276) The original line being further down the file causes any #ifdef/defined() checks for definitions in variant.h to silently skip. This was noticed when `USE_GC1109_PA` in Heltec v4 and Heltec Wireless Tracker failed to correct program TX_GAIN_LORA, but will also affect any variant.h-dependent configurations in this file, if they would have been defined above where the `#include` previously was. --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-11 11:31:42 -05:00
renovate[bot]	fca5343460	Update python Docker tag to v3.14 (#8255) ... Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-10-11 11:31:42 -05:00
Austin	cafb007ec4	mDNS: Advertise pio_env (for OTA scripts) (#8298)	2025-10-11 10:30:47 -05:00
Ben Meadors	fe2e2753aa	Merge branch 'master' into develop	2025-10-07 17:49:34 -05:00
Ben Meadors	fcb1d64eb9	Bloop	2025-10-07 17:47:08 -05:00
Ben Meadors	0c2673ee2f	Mercy	2025-10-07 14:32:36 -05:00
Ben Meadors	9c5513dcfe	Merge remote-tracking branch 'origin/master' into develop	2025-10-07 13:50:59 -05:00
Austin	74e6723ad9	Force coverage tests to run in simulation mode (#8251) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * Force coverage tests to run in simulation mode --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 13:14:19 -05:00
Ben Meadors	e8e8ee0993	Revert "Force coverage tests to run in simulation mode" ... This reverts commit e4ec719e6f.	2025-10-07 12:04:50 -05:00
Ben Meadors	a7f15097da	Merge pull request #8249 from vidplace7/fix-pio-test ... Force coverage tests to run in simulation mode	2025-10-07 12:00:51 -05:00
Austin Lane	e4ec719e6f	Force coverage tests to run in simulation mode	2025-10-07 12:54:02 -04:00
Ben Meadors	9b7b8ffb21	Merge pull request #8247 from meshtastic/develop ... Develop to master	2025-10-07 06:26:28 -05:00
szlifier	f0e4ea7664	Add SHT4x serial number for detection (#8222) ... SHT4X chip recognized as SHT31, registerValue that stores first bytes of chip's serial number did not mach the chip. Added a serial number match for SHT40 found in a SONOFF SNZB-02P.	2025-10-07 06:25:38 -05:00
Tom Fifield	468b40e8db	Wait until after GPS lock hold before updating position, if we can. (#8064) ... * Wait until after GPS lock hold before updating position, if we can. After the recent patch, we hold lock for a bit before updating the position. The positions that come in after the hold are genuinely better positions than what we've been doing before. However, they only come 20 seconds after we've got lock. Previously, we would update the local position as soon as we got a lock as well as at the end of the hold, since a hold was not always possible. With this patch, if the settings allow, we should skip that first local position update. Fixes https://github.com/meshtastic/firmware/issues/8029 * Fix falling edge handling. * spelling Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Congeal lock handling * Add named constants * define unit to avoid confusion Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * ifdef, not if. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Add handling for when we first turn on. * Don't run if not active * Reset fixhold * Logic fixes * Add path for ACTIVE--> IDLE --> ACTIVE Previously we only covered HARDSLEEP --> ACTIVE. * Change hold time to gps_update_interval - 10s * Update comment * Add extra buffer to avoid re-starting hold --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 06:24:09 -05:00
Ben Meadors	bd9076b740	Remove risky change	2025-10-07 06:14:35 -05:00
Chloe Bethel	81a5aeff74	Fix serial pins for Ebyte E77 MBL board (#8246) ... Also move RAK3172 and new EBYTE_E77_MBL define to variant.h, as this makes VSCode know about the defines properly... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 06:11:26 -05:00
Ben Meadors	f13e7c20ba	Merge branch 'master' into develop	2025-10-07 06:08:18 -05:00
Tom Fifield	5bcc47dddb	Revert "develop --> Master" (#8244)	2025-10-07 06:00:09 -05:00
Jonathan Bennett	668cc9fd64	Do slightly better at threading the search for GPS hardware (#8240) ... * Do slightly better at threading the search for GPS hardware * Formatting and minor logic fix * Remove now-spam GPS Log messages --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-07 05:58:39 -05:00
renovate[bot]	1d5b343836	Update meshtastic/device-ui digest to e564d78 (#8235) ... Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-10-07 16:56:13 +11:00
Tom Fifield	8023f475ee	Merge branch 'develop' into master	2025-10-07 16:40:44 +11:00
Jonathan Bennett	b696e083f3	Log antispam (#8241) ... * less power spam * Don't warn about the first 4 GPS checksum failures	2025-10-07 16:37:04 +11:00
renovate[bot]	b214f09ca1	Update meshtastic/web to v2.6.6 (#7583) ... Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-10-07 16:34:00 +11:00
Tom Fifield	68a2c4adda	Run Integration test in simulator mode (#8232) (#8242) ... Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-07 16:11:36 +11:00
Tom Fifield	518680514f	Actions: Simplify matrices, cleanup build_one_* (#8218) (#8239) ... Co-authored-by: Austin <vidplace7@gmail.com>	2025-10-07 13:37:13 +11:00
Austin	fc1737c949	Actions: Simplify matrices, cleanup build_one_* (#8218)	2025-10-07 11:58:00 +11:00
Jonathan Bennett	735784e6e4	Run Integration test in simulator mode (#8232)	2025-10-06 13:00:44 -05:00
renovate[bot]	87e3540f48	Update meshtastic/device-ui digest to f920b12 (#8234) ... Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-10-06 12:59:50 -05:00
renovate[bot]	329a494ce2	Update meshtastic-ArduinoThread digest to b841b04 (#8233) ... Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2025-10-06 12:59:40 -05:00
Ben Meadors	627c0145e7	Centralize getNodeId and fix references to owner.id (#8230)	2025-10-06 07:56:27 -05:00
Dmitry Dubinin	29f4d99bf6	Add Adaptive Polling Intervals to WebServer (#7864) ... * feat: add adaptive polling intervals to WebServer Replace fixed 5ms polling with adaptive intervals based on HTTP activity: - 50ms during active periods (first 5 seconds after request) - 200ms during medium activity (5-30 seconds) - 1000ms during idle periods (30+ seconds) Reduces CPU usage significantly during idle periods while maintaining responsiveness when handling HTTP requests. * Fix integer overflow and magic numbers in WebServer - Handle millis() overflow in getAdaptiveInterval() - Replace magic numbers with named constants - Improve code readability and maintainability	2025-10-06 05:52:40 -05:00
github-actions[bot]	036a58735e	Upgrade trunk (#8229) ... Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>	2025-10-06 05:50:16 -05:00
Ben Meadors	18ca9e80d5	Merge pull request #8219 from GUVWAF/nextHopTrace ... Update next-hops based on traceroute result	2025-10-05 17:59:37 -05:00
GUVWAF	5c2997ef53	Print only one byte	2025-10-05 17:03:52 +02:00
GUVWAF	c147ce9a85	Update next-hops based on traceroute result	2025-10-05 16:58:42 +02:00
Ben Meadors	27f316b931	Merge pull request #8216 from GUVWAF/reprocessPacket ... Reprocess repeated packets and deduplicate logic	2025-10-05 08:58:13 -05:00
GUVWAF	f7cf5e6b0a	Change to "rebroadcast"	2025-10-05 15:56:45 +02:00