geeksville 1a38c4e51d Remove LED_INVERTED, see below for why ;-) (#4382) ... While working on #4378 I noticed a funny problem: the blinking system LED was on during deep-sleep. Initially I thought it was some weird sleep hw config thing but it turns out it was easier but more pervasive. We had two different preprocessor symbols which both meant approximately the same thing LED_INVERTED and LED_STATE_ON (though their polarity was opposite). Some variant files were setting one, others were setting the other, and others were setting both. heh. In the case of the board I was testing (seeed tracker wio 1100) it was only setting one and the default behavior for the other (for all boards) was incorrect. So I did a grep and it seems like LED_STATE_ON was used more often, so I kept that one and removed LED_INVERTED everywhere.		2024-08-05 06:02:32 -05:00
..
ai-c3
betafpv_900_tx_nano
betafpv_2400_tx_micro
bpi_picow_esp32_s3
canaryone	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
CDEBYTE_EoRa-S3
chatter2	Trunk fmt	2024-07-31 07:42:23 -05:00
diy	Added RF95 SX1268 support (#4338)	2024-07-27 05:58:55 -05:00
Dongle_nRF52840-pca10059-v1
EBYTE_ESP32-S3	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
esp32-s3-pico
feather_diy
heltec_capsule_sensor_v3	Trunk fmt	2024-07-09 12:16:56 -05:00
heltec_esp32c3	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
heltec_hru_3601	Add support for Heltec HRU-3601	2024-06-20 12:30:02 +08:00
heltec_mesh_node_t114	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
heltec_v1
heltec_v2
heltec_v2.1
heltec_v3	Add #define USE_SSD1306 to avoid automatic detection causing pixel shift. (#4356)	2024-07-30 17:15:50 -05:00
heltec_vision_master_e213	Initial support for HT-VME290, sleep fixes for HT-VME213 (#4334)	2024-08-02 14:03:59 +12:00
heltec_vision_master_e290	Initial support for HT-VME290, sleep fixes for HT-VME213 (#4334)	2024-08-02 14:03:59 +12:00
heltec_vision_master_t190	Fix macros	2024-07-09 15:11:11 -05:00
heltec_wireless_paper	Initial support for HT-VME290, sleep fixes for HT-VME213 (#4334)	2024-08-02 14:03:59 +12:00
heltec_wireless_paper_v1	Initial support for HT-VME290, sleep fixes for HT-VME213 (#4334)	2024-08-02 14:03:59 +12:00
heltec_wireless_tracker	Cleanup GPS, add UC6580 autodetect (#4319)	2024-07-23 06:18:27 -05:00
heltec_wireless_tracker_V1_0	Fix type (#4323)	2024-07-23 08:35:01 -05:00
heltec_wsl_v3	Trunk variants	2024-05-31 11:18:06 -05:00
lora_isp4520
lora_relay_v1
lora_relay_v2
m5stack_core
m5stack_coreink	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
m5stack-stamp-c3
MakePython_nRF52840_eink
MakePython_nRF52840_oled
ME25LS01-4Y10TD	Add Minewsemi LR1110+nRF52840-ME25LS01 [both 4.2inch e-ink and non e-ink varaint] (#4387)	2024-08-05 05:59:57 -05:00
ME25LS01-4Y10TD_e-ink	Add Minewsemi LR1110+nRF52840-ME25LS01 [both 4.2inch e-ink and non e-ink varaint] (#4387)	2024-08-05 05:59:57 -05:00
monteops_hw1
my_esp32s3_diy_eink
my_esp32s3_diy_oled
nano-g1
nano-g1-explorer
nano-g2-ultra	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
pca10056-rc-clock
picomputer-s3
portduino	Make SPI frequency and TOPHONE queue size configurable on Native (#4369)	2024-08-01 19:29:49 -05:00
ppr
ppr1
radiomaster_900_bandit_micro	Added Radiomaster Bandit Nano and Radiomaster Bandit Micro to default_envs. (#4077)	2024-06-11 14:51:39 -05:00
radiomaster_900_bandit_nano	Changed a RADIOMASTER_900_BANDIT_NANO to DISPLAY_FLIP_SCREEN (#4366)	2024-08-01 11:53:38 -05:00
rak2560	CI is creating the uf2 file during build	2024-06-16 21:08:34 +02:00
rak3172	Add RAK3172 to the STM32WL canon	2024-07-27 09:38:28 -05:00
rak4631	Generalize SWD debugging stuff so it works on all nrf52 targets. (#4377)	2024-08-03 07:41:35 -05:00
rak4631_epaper	Add support for BMX160/RAK12034 compass module (#4021)	2024-06-11 17:47:45 -05:00
rak4631_epaper_onrxtx	Add support for BMX160/RAK12034 compass module (#4021)	2024-06-11 17:47:45 -05:00
rak10701	rak10701: support touchscreen (#4104)	2024-06-14 19:36:20 -05:00
rak11200
rak11310
rp2040-lora
rpipico
rpipico-slowclock
rpipicow
senselora_rp2040
station-g1
station-g2
t-deck
t-echo	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
t-watch-s3
tbeam	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
tbeam_v07
tbeam-s3-core	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
tlora_t3s3_v1	Revert "Sync Wio lr1110 refresh with master (#4288)"	2024-07-22 15:30:36 +02:00
tlora_v1
tlora_v1_3
tlora_v2
tlora_v2_1_16
tlora_v2_1_16_tcxo
tlora_v2_1_18
tracker-t1000-e	fix #4367 make USB power detection work correctly on seeed trackers (#4376)	2024-08-02 20:20:44 -05:00
trackerd	Add trackerd to build. (#4347)	2024-07-31 05:58:41 -05:00
tracksenger	Cleanup GPS, add UC6580 autodetect (#4319)	2024-07-23 06:18:27 -05:00
TWC_mesh_v4
unphone	Remove LED_INVERTED, see below for why ;-) (#4382)	2024-08-05 06:02:32 -05:00
wio-e5	Enable STM32 build (#4339)	2024-07-27 06:39:16 -05:00
wio-sdk-wm1110	Merge branch 'master' into wio-lr1110-refresh	2024-07-22 15:37:34 +02:00
wio-t1000-s	Support Seeed Tracker-T1000-E (#4303)	2024-07-24 21:10:38 -05:00
wio-tracker-wm1110	Generalize SWD debugging stuff so it works on all nrf52 targets. (#4377)	2024-08-03 07:41:35 -05:00
wiphone
xiao_ble	Revert "Sync Wio lr1110 refresh with master (#4288)"	2024-07-22 15:30:36 +02:00