firmware/variants/heltec_wireless_paper_v1/platformio.ini

[env:heltec-wireless-paper-v1_0]
extends = esp32s3_base
board_level = extra
board = heltec_wifi_lora_32_V3
build_flags = 
  ${esp32s3_base.build_flags} 
  -I variants/heltec_wireless_paper_v1 
  -D HELTEC_WIRELESS_PAPER_V1_0
  -D EINK_DISPLAY_MODEL=GxEPD2_213_BN
  -D EINK_WIDTH=250
  -D EINK_HEIGHT=122
  -D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
  -D EINK_LIMIT_FASTREFRESH=5           ; How many consecutive fast-refreshes are permitted
  -D EINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
  -D EINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
  ;-D EINK_BACKGROUND_USES_FAST         ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
  -D EINK_HASQUIRK_VICIOUSFASTREFRESH   ; Identify that pixels drawn by fast-refresh are harder to clear
lib_deps =
  ${esp32s3_base.lib_deps}
  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
  lewisxhe/PCF8563_Library@^1.0.1
upload_speed = 115200
feat: initial support for Heltec Wireless Paper v1.0 (#3181) E-ink panel is DEPG0213BNS800. Otherwise, identical to v1.1 (?) Partial refresh supported, but not implemented in this commit. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> 2024-02-09 01:00:13 +00:00			`[env:heltec-wireless-paper-v1_0]`
			`extends = esp32s3_base`
Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (#5436) Co-authored-by: Tom Fifield <tom@tomfifield.net> 2024-11-25 11:14:48 +00:00			`board_level = extra`
feat: initial support for Heltec Wireless Paper v1.0 (#3181) E-ink panel is DEPG0213BNS800. Otherwise, identical to v1.1 (?) Partial refresh supported, but not implemented in this commit. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> 2024-02-09 01:00:13 +00:00			`board = heltec_wifi_lora_32_V3`
			`build_flags =`
			`${esp32s3_base.build_flags}`
			`-I variants/heltec_wireless_paper_v1`
			`-D HELTEC_WIRELESS_PAPER_V1_0`
Refactor EInkDisplay (#3299) * Refactor EInkDisplay A lot of variant specific code is merged, with the macros pushed to the respective variant.h files. "Dynamic Partial" code has been purged, pending a rewrite. * fix: declare class only if USE_EINK, init all members * refactor: move macros to platformio.ini Responds to https://github.com/meshtastic/firmware/pull/3299#issuecomment-1966425926 * fix: EInkDisplay::connect() references old macros Usage was in a block of variant-specific code, which had been intentionally left untouched. * fix: remove duplicate macros from variant.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> 2024-02-28 15:45:15 +00:00			`-D EINK_DISPLAY_MODEL=GxEPD2_213_BN`
			`-D EINK_WIDTH=250`
			`-D EINK_HEIGHT=122`
Reimplement "Dynamic E-Ink" as a derived class (#3316) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> 2024-03-03 02:07:29 +00:00			`-D USE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk`
			`-D EINK_LIMIT_FASTREFRESH=5 ; How many consecutive fast-refreshes are permitted`
			`-D EINK_LIMIT_RATE_BACKGROUND_SEC=30 ; Minimum interval between BACKGROUND updates`
			`-D EINK_LIMIT_RATE_RESPONSIVE_SEC=1 ; Minimum interval between RESPONSIVE updates`
			`-D EINK_LIMIT_GHOSTING_PX=2000 ; (Optional) How much image ghosting is tolerated`
E-Ink Screensaver (#3477) * fix Wireless Paper double-clear screen at boot * log when flooded with "responsive" frames * show the "resuming" screen when waking from deep-sleep * rename drawDeepSleepScreen avoid future confusion with "Screen Paused" screen * show a screensaver frame when screen off The frame shown during deep sleep is now also passed through showScreensaverFrames() * Add macros for E-Ink color values. OLEDDISPLAY_COLOR is inverted. Result of light-mode on E-Ink vs dark-mode on OLED? * adapt drawDeepSleepScreen to new screensaver convention * Mark Wireless Paper V1.1 as having problems with ghosting Any other issues can be marked in a similar way, then handled in code where relevant * Change screensaver from fullscreen logo to overlay * identify "quirks" rather than "problems" * move async refresh polling from display() to a NotifiedWorkerThread * Prevent skipping of deep-sleep screen (Hopefully) * Redesign screensaver overlay Now displays short name * Optimize refresh for different displays * Support older EInkDisplay class * Don't assume text alignment * fix spelling of a quirk macro (No impact to code, but avoids future issues) * Handle impossibly unlikely millis() overflow error Should have just let it go, but here we are.. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> 2024-03-28 23:31:11 +00:00			`;-D EINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.`
			`-D EINK_HASQUIRK_VICIOUSFASTREFRESH ; Identify that pixels drawn by fast-refresh are harder to clear`
feat: initial support for Heltec Wireless Paper v1.0 (#3181) E-ink panel is DEPG0213BNS800. Otherwise, identical to v1.1 (?) Partial refresh supported, but not implemented in this commit. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> 2024-02-09 01:00:13 +00:00			`lib_deps =`
			`${esp32s3_base.lib_deps}`
Swap Wireless Paper V1.0 dependency to meshtastic/GxEPD2 2024-03-11 14:06:01 +00:00			`https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a`
feat: initial support for Heltec Wireless Paper v1.0 (#3181) E-ink panel is DEPG0213BNS800. Otherwise, identical to v1.1 (?) Partial refresh supported, but not implemented in this commit. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> 2024-02-09 01:00:13 +00:00			`lewisxhe/PCF8563_Library@^1.0.1`
			`upload_speed = 115200`