5237 Commits

Author	SHA1	Message	Date
Todd Herbert	2517b1d769	feat: driver for display HINK_E042A87 ... As of Feb. 2025, these panels are used for "WeActStudio 4.2in B&W" display modules.	2025-03-24 22:25:17 +13:00
Todd Herbert	c0fb6dd6bb	fix: improve display health on shutdown ... Two extra full refreshes, masquerading as a "shutting down" screen. One is drawn white-on-black, to really shake the pixels up.	2025-03-24 22:25:16 +13:00
Todd Herbert	97b36f3783	fix: allow timeout if display update fails ... Result is not graceful, but avoids total display lockup requiring power cycle. Typical cause of failure is poor wiring / power supply.	2025-03-24 22:25:15 +13:00
Todd Herbert	b64729987e	fix: SSD16XX reset pulse ... Allow time for controller IC to wake. Aligns with manufacturer's suggestions. T-Echo button timing adjusted to prevent bouncing as a result(?) of slightly faster refreshes.	2025-03-24 22:25:15 +13:00
Todd Herbert	ddb1f6f8b5	chore: update the example applets	2025-03-24 22:25:14 +13:00
Todd Herbert	7c327ce0e4	refactor: don't init system applets using onActivate ... System applets cannot be deactivated, so we will avoid using onActivate / onDeactivate methods entirely.	2025-03-24 22:25:13 +13:00
Todd Herbert	f1f9aac134	chore: InkHUD documentation ... Word salad for maintainers	2025-03-24 22:25:13 +13:00
Andrew Yong	daa4186d65	[esp32] Define BUTTON_PIN (-1) by default, fixes #6213 (#6371) ... Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-03-23 16:32:55 +01:00
dfsx1	cf7f0f9d08	Fix NodeInfo exploit overwriting publicKey in NodeDB (#6372) ... Co-authored-by: dfsx1 <dfsx1@users.noreply.github.com>	2025-03-23 05:49:06 -05:00
Tom Fifield	1e4a0134e6	Remove unnecessary null pointer check (#6370) ... Further pointed out by @elfring, this patch removes one more unnecessary null pointer check. https://github.com/meshtastic/firmware/issues/6170#issuecomment-2744002798	2025-03-21 19:55:11 -05:00
Thomas Göttgens	0951fdd49b	Add support for Heltec HRI-3621 industrial sensor hub (#6366)	2025-03-21 16:12:49 +01:00
Thomas Göttgens	848a3ed6a1	implement littlefs for stm32 (#5987) ... Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Daniel Peter Chokola <dan.chokola@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-03-21 16:12:27 +01:00
github-actions[bot]	fd7a1f2ccb	[create-pull-request] automated change (#6365)	2025-03-21 14:28:23 +01:00
Tom Fifield	5acaf8f897	Enable range test on Linux Native (#6356) ... The Range Test Module was defined-out by architecture. No reason it shouldn't work, so add PORTDUINO to the list of architectures that compile this module. Tested on Ubuntu. Enables without crashing, will send packets on the set time. However, for now the CSV file download does not appear to work. Partially fixes https://github.com/meshtastic/firmware/issues/5618	2025-03-21 05:59:20 -05:00
Tom Fifield	cff93adb5e	[WIP] LS20031 setup support (#5737) ... LS20031 is a MTK3339-based chip. Therefore, it should share some heritage with other MTK3333 or MTK3339 chips. Re-use the L76B commands for setup.	2025-03-21 05:58:52 -05:00
Tom Fifield	ae27aaaf43	Remove unnecessary null pointer checks (#6358) ... As reported by @elfring, we had several points in our code where it was unnecessary to check pointers were non-null before deleting them. Fixes https://github.com/meshtastic/firmware/issues/6170	2025-03-21 05:54:42 -05:00
Mike	31c0e8fa2c	Support WiFi OTA (#6352) ... * Support WiFi OTA * Fix trunk warnings * Make getVersion() check for project name too --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-20 13:39:33 -05:00
raulperdomo	0d95b1afcc	Added bounds checking to memcpy and use memory-safe strlcpy (#6351) ... * Added bounds checking to memcpy and use memory-safe strlcpy for reading serial data in processWXSerial() function. * Fixed linting with trunk	2025-03-20 10:40:13 -05:00
Austin	46235f6f8b	RP2xx0: Add UDP Multicast support (#6327)	2025-03-20 08:49:28 -05:00
Jorropo	d1068fd1e4	Add UDP multicast support on linux. (#6342) ... * Add UDP multicast support on linux. Closes #6326 We tested it an it works. This is really hacky to say the least. * Add libuv to Linux packaging * Trunkadunk * Correct ref * Add libuv1-dev to setup-native --------- Co-authored-by: vidplace7 <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-20 08:47:39 -05:00
Jorropo	f41afb14b1	raise the multicast UDP TTL limit (#6343) ... Since 96ba94843b we don't spray packets to all machines on the network. So we can allow ourself to raise the TTL limit, this allows users who run L3 IGMP Routing infrastructure to pass meshtastic frames over UDP. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-20 05:41:29 -05:00
Austin	6673cb9292	Increase MAX_NUM_NODES on high-flash ESP32_S3 (#6311)	2025-03-18 20:19:51 -05:00
Ben Meadors	9cc13e628a	Stubbed out backup / restore methods for now and fixed bug	2025-03-17 19:24:47 -05:00
Jorropo	af8b64e84e	pass pointer to UDP multicast packet to protobuf decoder (#6333) ... The packet.readBytes API is not available on all targets: - RP2040 & RP2340 - yet to be written portduino API Instead pass the data buffer as-is. It also removes a memcpy which do not need to exists. I've tested it successfully on a tbeam. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-16 19:36:33 -05:00
Jorropo	96ba94843b	Send UDP packets to multicast address rather than broadcast address (#6331) ... A smart router or switch is able to snoop the multicast address to only send the packets to nodes listening on the multicast address. Before all machines reachable on the L2 layer would receive the packet.	2025-03-16 19:36:02 -05:00
Thomas Göttgens	2d565c2921	trunk'd	2025-03-16 16:18:12 +01:00
HarukiToreda	2525111c39	E-ink partial refresh limitation removed for free text screen (#6201)	2025-03-16 16:15:33 +01:00
Ben Meadors	dc100e4d3e	Cleanup	2025-03-16 08:19:46 -05:00
Thomas Göttgens	1640fb105d	new device: Lilygo T-Eth-Elite (#6321)	2025-03-15 14:15:35 +01:00
github-actions[bot]	99e42b4d22	[create-pull-request] automated change (#6323) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2025-03-15 07:03:53 -05:00
Chris Danis	f66784ed2a	Don't allow is_managed without any valid admin_keys (#6310)	2025-03-14 10:10:38 -05:00
paragonnov	8efe8a2ea3	Fix KR920's Tx power limitation (#6307)	2025-03-13 18:14:41 +08:00
Manuel	ec59f7d7dd	fix packet queue full (#6292)	2025-03-11 18:59:44 -05:00
todd-herbert	5de6bc1851	Fix excluded_modules metadata with InkHUD (#6272)	2025-03-08 19:06:32 -06:00
github-actions[bot]	94de2315c1	[create-pull-request] automated change (#6266) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-03-08 06:22:11 -06:00
Chris Danis	7f17747d8c	NodeInfo exchange: don't bother if too far away (#6260) ... When we receive a NodeInfo from a new node, if it is more than 2 hops beyond our configured hop limit away from us, don't bother to send a NodeInfo back to it. In my dense urban environment, I see many nodes that are >= 5 hops away, but sending their NodeInfo with a hopStart of 6 or 7. In most cases I can imagine, this seems like a waste of airtime.	2025-03-08 09:33:23 +08:00
Tom Fifield	284598ed56	Add detection support for LTR390UV Sensor (#6009) ... * Add detection support for LTR390UV Sensor The LTR390 is a UV sensor. This patch adds detection support, for a future patch that will add the full sensor support. * Update ScanI2C.h	2025-03-07 18:51:38 +08:00
Chris Danis	5c77d42345	i2c: 0x45 can also be an SHT35 (#6249)	2025-03-07 09:49:55 +08:00
Ben Meadors	c8bd6c32cc	Correct HW_MODEL	2025-03-06 08:43:03 -06:00
Mark Trevor Birss	f6a9e7d741	Add initial support for CrowPanel ESP32 5.79” E-paper HMI (#6233)	2025-03-06 11:28:43 +01:00
todd-herbert	e6a98b1d6b	InkHUD refactoring (#6216) ... * chore: todo.txt * chore: comments * fix: no fast refresh on VME290 Reverts a line of code which was accidentally committed * refactor: god class Divide the behavior from the old WindowManager class into several subclasses which each have a clear role. * refactor: cppcheck medium warnings Enough to pass github CI for now * refactor: updateType selection * refactor: don't use a setter for the shared AppletFonts * fix: update prioritization forceUpdate calls weren't being prioritized * refactor: remove unhelpful logging getTimeString is used for parsing our own time, but also the timestamps of messages. The "one time only" log printing will likely fire in unhelpful situations. * fix: " " * refactor: get rid of types.h file for enums * Keep that sneaky todo file out of commits	2025-03-06 11:25:41 +01:00
Tavis	b2ef92a328	add rain data from ws85 (#6242) ... add rain data as 1h and 24h	2025-03-06 10:55:08 +01:00
Andrik45719	b25db1f42c	E22-400M SX126X_DIO3_TCXO_VOLTAGE fix (#6232) ... Added TCXO voltage setting for SX1268 based module to fix error: Calibration failed, device errors: 0x20 SX126x init result -707	2025-03-06 09:44:53 +01:00
Chris Danis	f5e0e282b6	environment: add DPS310 high-accuracy barometer (#6237) ... * dps310: initial scan support * dps310 sensor support * new protobufs * new protobufs * address cr --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-06 11:58:18 +08:00
github-actions[bot]	a3a9b2fe84	[create-pull-request] automated change (#6240) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-03-05 20:50:20 -06:00
Ben Meadors	6c8058e1d8	Update SEEED_XIAO_NRF52840_KIT (#6239)	2025-03-06 09:44:22 +08:00
github-actions[bot]	239e5412b3	[create-pull-request] automated change (#6235) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-03-05 14:53:51 -06:00
Tom Fifield	2391982c1d	Only call GPS Probe commands once per family (#6114) ... In the GPS probe code we write commands on the serial line and determine which GPS we have based on the result. GPS units in the same family sometimes use the same command, but return different results (eg AG3335 and AG3332 both use $PAIR021*39). Currently we run the command once per GPS. Instead we should run each command only once per family, record the result, and select the GNSS MODEL based on the result, which is what this patch does. Before the change, we put 12 commands on the serial bus. Now we only put 6. This should markedly improve the speed and reliability of GPS detection. Fixes https://github.com/meshtastic/firmware/issues/5193 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-04 09:47:06 -06:00
github-actions[bot]	050f0016c4	[create-pull-request] automated change (#6221)	2025-03-04 01:56:35 +01:00
Thomas Göttgens	6715662281	don't build the niche* stuff for non-inkHUD builds. (#6217)	2025-03-03 09:10:47 -06:00