* AdminModule: Publish fixed position updates
Enabled GPS thread when fixed position is updated, to let the GPS thread run once and publish the new fixed position.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* GPS: Consider changes in only altitude as an updated point
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
This enables the node and channel selection to be accessed by pressing the tab shortcut and then swiping between nodes or pressing tab again to change channels.
(To access the tab function look at my other pull request https://github.com/meshtastic/firmware/pull/3668)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* NeighborInfo: Only keep neighbors in RAM
It fills up quickly when nodes are running >=2.3
* Defer first transmission as it's usually empty
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* - map fn+m to mute and unmute the external notification module
- map fn+t to be an alternative for the TAB key
* add whitelist to inputbroker
* (maybe) sweet-talking t-deck into tabbing...
* now for real - back in Kansas
* More fancy mappings
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Don't save Neighbors to flash when receiving
* Move `shouldSave` to `saveProtoForModule()`
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Use `alterReceivedProtobuf()` for NeighborInfo and Traceroute
`alterReceived()` should never return NULL
Traceroute should be promiscuous
* Remove extensive logging from NeighborInfo module
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* (3/3) Add variant for pico with waveshare and GPS hat, utilizing slow clock.
* Not everybody has Serial2
* Trunk
* Push it real gud
* No init
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Set `hop_start` in header to determine how many hops each packet traveled
* Set hopLimit of response according to hops used by request
* Identify neighbors based on `hopStart` and `hopLimit`
* NeighborInfo: get all packets and assume a default broadcast interval
* Add fail-safe in case node in between is running modified firmware
* Add `viaMQTT` and `hopsAway` to NodeInfo
* Replace `HOP_RELIABLE` with hopStart for repeated packet
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add UI frame to display PaxCounter module data
* only acquire screen when paxcounter is active, i.e. enabled and wifi and ble are both off
* sync font #define with other occurrences in code
* protect screen specific code with #if HAS_SCREEN
* limit upload_speed to 115200 for TLORA_V2_1_16
* fix failing trunk checks; sorry
* Revert "limit upload_speed to 115200 for TLORA_V2_1_16"
This reverts commit 4eb549c5e8.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* StoreForward updates
- Send history in "text" variant
- Don't send history the client already got
- Check if PSRAM is full
- More sensible defaults
* Set `TEXT_BROADCAST` or `TEXT_DIRECT` RequestResponse tag
* feat: E-Ink "Dynamic Partial" (#3193)
Use a mixture of full refresh, partial refresh, and skipped updates, balancing urgency and display health.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* [create-pull-request] automated change (#3209)
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
* Reset `last_index` if history was cleared, e.g. by reboot
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
Co-authored-by: Garth Vander Houwen <garthvh@yahoo.com>
* compiling w/o e-ink display
* pinout changes
* progress getting LoRa and LCD working
* fix for bootloader, gps pins
* add canary to build matrix
* merge with main
* fix build by excluding BellModem in RadioLib
* fixes for GPS
* Fix LED_BLUE and GPS RX/TX pins
* Variant changes for merge
* make GPS baud rate configurable
* fix debug config
* Canary v1.2 changes
* Fixes for GPS
* pass trunk check
* bump protobufs to master
* update build flags to use CANARYONE enum
* use canaryone throughout for consistency.
* #define 0 is still defined
* add back .vscode/extensions.json
* bump protobufs
* revert manual change to generated file
---------
Co-authored-by: Steven Osborn <steven@lolsborn.com>
* Mark packets received via MQTT and add option to ignore them
* Don't send packets received via MQTT back into MQTT
Generate implicit ACK for packets we as an MQTT gateway sent
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Move to Portduino's getMacAddr()
* Add ST7735/S screen support
* Push Raspbian support into native target
* Remove latent pigpio references.
* CardKB defensive programming
* Adds configurable spidev
* Fixes to build on Fedora 40
* ENUMs are not #defines. Pull latest portduino
* Add more configuration options for SPI displays
* Add config.yaml option to set DIO3_TCXO_VOLTAGE
* change tft clear() to fillScreen()
Maintains compatability with ESPI driver.
* Adds TXen and RXen pins to portduino
* Add -c --config options to specify config file
* Fail when a specified config file is unavailable
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* WIP
* ESP8266 SAM fun
* I2S audio / ext. notification module
* Remove
* Protos
* Add use_i2s_as_buzzer from protos
* Fixes
* Stuff
* Thing
* Ext. Notification working(ish)
* Remove SAM commented code
* Trunk upgrade
* Trunk
* Fixes
* Slow not fast... :-|
* T-Deck and T-Watch don't use normal buttons
* Stop ext. notification nagging with touchscreen as well
* Add button gpio back for T-Deck, but guard against long-press during ext. notification
* Ext. notification wrap up
* Better place to guard against long-press false positives
* Adjust default gain and guard against non-i2s devices referencing audio-thread
* Simplify guard logic with a boolean
* Supress uninitMemberVar
* Protos merge got out of wack
* Trunk resolution
* Remove extra crap
* Cleanup and thread-interval
* Default to alert message buzzer and add nag timeout
* Formatting
- only works if we don't have a phone connected, but that is probably dsired
- this will send a copy of device-originating text messgaes to a connected phone. Breaking change.
- this will iterate the tophone queue by deconstructing and reconstructing it every time we look for an ID. Probably also mangles the queue oder since it aborts when a ID is found.
- Can we navigate the packet pool instead? If so, how?
- Let's keep this in draft state for now
* Pico W: Initial WiFi support: connects, but freezes after a while
* Update arduino-pico core to fix hang with Wi-Fi
* Add `picow` to workflow since it's different from `pico` now
* Guard-clause channel util. to reduce nesting
* Try-fix PhoneAPI position not updating
* Trunk
* Missed it
* Really disable GPS when asked to
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Populate the position log entries with data fields
includes datafields with no data as 0
* trunk check formatted.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Support for SerialModule on RP2040
* Remove one !defined too many
* Increase serial RX_BUFFER: more reliable for long packets
Even results into an error for ESP32
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor GPS to not probe if pins not defined
* Use Named Constructor to clean up code
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
* Cleanup and remove dead code
* Rename GPS_PIN_WAKE to GPS_PIN_STANDBY
* Actually put GPS to sleep between fixes
* add GPS_POWER_TOGGLE for heltec-tracker and t-deck
* Change GPS_THREAD_INTERVAL to 200 ms
* More dead code, compiler warnings, and add returns
* Add Number of sats to log output
* Add pgs enable and triple-click config
* Track average GPS fix time to judge low-power time
* Feed PositionModule on GPS fix
* Don't turn off the 3v3_s line on RAK4631
when the rotary is present.
* Add GPS power standbyOnly option
* Delay setting time currentQuality
to avoid strange log message.
* Typos, comments, and remove unused variable
* Short-circuit the setAwake logic on GPS disable
* heltec-tracker 0.3 GPS power saving
* set en_gpio to defined state
* Fix fixed_position logic with GPS disabled
* Don't process GPS serial when not isAwake
* Add quirk for Heltec Tracker GPS powersave
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* support BB Q10 keyboard
* remove debug code
* fix wrong logic
* fix left/right keys for cardkb
* Try to enable Q10 kb after all
* cppcheck
* Only fire on Key release and assume 0x0a is a enter as well
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Add interested portnums to TextMessageModule
* Send Detection Sensor Module messages on its own portnum
* Add to Ext. Notification and consolidate logic
* RANGE_TEST_APP portnum for RangeTestModule
* WIP
* Updates
* Move it out of the macro guard so portduino can build
* Changes from feedback
* Use minimum_broadcast_secs as interval if we just broadcasted to avoid wasting cpu cycles
* Fmt
* Merge conflict resolution boogered me up
* Missed a spot
* getConfiguredOrDefaultMs
* Get the minimum interval
* - Permanently Enable Canned Messages on T-Deck and Picomputer
- picomputer has a really dark TFT; switch color to white for better UX.
* well, you know... bullock...
* WIP
* Updates
* Move it out of the macro guard so portduino can build
* Changes from feedback
* Use minimum_broadcast_secs as interval if we just broadcasted to avoid wasting cpu cycles
* Fmt
* Merge conflict resolution boogered me up
* Missed a spot
* Extend node max to 100 and remove mesh_sds_timeout_secs
* Const pointers for you and you and you
* Fixes and supressions
* Missed it
* uint
* Resize
* Derp
