pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-02-04 11:49:58 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
1,798 Commits 26 Branches 279 Tags 192 MiB
5a96dc0083
Commit Graph

240 Commits

Author SHA1 Message Date
Kevin Hester
9134faaed1 turn off segger debug in ttgo eink build 2020-10-15 16:11:40 +08:00
Kevin Hester
5f2f3c94b9 PPR1 and allow boards to set lower or higher sx1262 power limits 2020-10-15 13:47:10 +08:00
Kevin Hester
1ebd7b0c3e make lightsleep default time 5 minutes, with 1 minute in for BLE syncing 2020-10-14 08:53:12 +08:00
Kevin Hester
5457541244 fix #477: sleep behavior was broken in app due to device bug since 1.1.1 
+        // NOTE: The phone app needs to know the ls_secs value so it can properly expect sleep behavior.
+        // So even if we internally use 0 to represent 'use default' we still need to send the value we are
+        // using to the app (so that even old phone apps work with new device loads).
 2020-10-14 08:45:29 +08:00
Jm Casler
76b4be3b87
Merge pull request #469 from mc-hamster/master 
Switched to esp32_https_server from the Espressif (Issue #452) and Enable RX LNA (#466)
 2020-10-10 22:28:08 -07:00
Kevin Hester
999b292717 fixes for the posix port 2020-10-11 09:18:47 +08:00
Jm Casler
c16acb904e Merge branch 'master' of https://github.com/mc-hamster/Meshtastic-device 2020-10-10 17:59:46 -07:00
Jm Casler
5b777219be Enable the RX LNA #466 
Enabling the RX LNA
 2020-10-10 17:59:32 -07:00
Kevin Hester
49b4ed2a89 coroutine: kinda works now 2020-10-10 18:03:45 +08:00
Kevin Hester
4b9ea4f808 Merge branch 'dev' into coroutine 2020-10-10 09:22:23 +08:00
Kevin Hester
95cb6b06e4 fix #462 publish immediately on any GPS state change 
(don't wait until end of aquisition window)
 2020-10-10 09:20:38 +08:00
Kevin Hester
2044427e97 coroutines: wip compiles but does not link 2020-10-09 14:16:51 +08:00
Kevin Hester
4a70ba1f7a fix nodeinfo stored times (I think) for @lgoix 2020-10-09 10:01:13 +08:00
Kevin Hester
7a4b8cde11 keep rf95 max power at 20 dBm so users don't smoke their boards 2020-10-08 10:51:31 +08:00
Kevin Hester
113859e791 increase sx1272 max power 
+#define MAX_POWER 27
 // if we use 20 we are limited to 1% duty cycle or hw might overheat.  For continuous operation set a limit of 17
+// In theory up to 27 dBm is possible, but the modules installed in most radios can cope with a max of 20.  So BIG WARNING
+// if you set power to something higher than 17 or 20 you might fry your board.
 2020-10-08 09:57:59 +08:00
Kevin Hester
023f1c24fb RTC: add notion of 'quality' for different time sources 
Allow use of mesh based time until a GPS time arrives
 2020-10-08 07:46:20 +08:00
Kevin Hester
f00d07baa3 RTC: pull rtc code into own file for cleanup 2020-10-08 07:28:57 +08:00
Kevin Hester
1a3cc40c7e sx1262 better to check for header because preamble might never result in irq 2020-10-08 06:23:05 +08:00
Kevin Hester
c0c83ad389 If we are not supposed to share locations make sure phone doesn't either 2020-10-07 17:46:25 +08:00
Kevin Hester
7a5832ab8a SX1262: fix serious bug with detecting if we have a rx packet in progress 
Could cause hangs on the way into sleep (and enormous power consumption).
Instead of checking for rx packet length (which only changes at completion)
check if we've received preamble bits but haven't yet received a completed
packet interrupt.

notes:


wait to sleep loop problem
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Can not send yet, busyRx
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0

vs normal run
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
radio wait to sleep, txEmpty=0
Starting low level send (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
Completed sending (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)
 2020-10-07 13:43:51 +08:00
Kevin Hester
943d5cb08d bug #376 we were not staying in light sleep as long as intended 2020-10-06 11:48:53 +08:00
Kevin Hester
7480eb1826 Change to use zeros for timeout values that are 'default' 2020-10-06 09:43:00 +08:00
Kevin Hester
b072eec4ac wip for #376 2020-10-05 14:43:44 +08:00
geeksville
d66cede7fc Merge branch 'eink' into power 2020-10-01 07:51:01 -07:00
geeksville
3a638090a2 update protos for #376 2020-09-30 07:47:16 -07:00
Jm Casler
423cbc2c6d Added frequency information to debug output (#447) and cleanup of screen.cpp and meshwifi.cpp 2020-09-29 00:59:26 -07:00
geeksville
3e5f81bf2a move region into userpreferences, to end region specific firmwares 2020-09-25 12:52:08 -07:00
geeksville
1a064a4666 Merge remote-tracking branch 'root/master' 2020-09-25 09:19:58 -07:00
Jm Casler
b39f6c96bd Merge remote-tracking branch 'origin/dev-wifi' 2020-09-22 22:00:07 -07:00
comgram
55cb0c52ee Add Korean Frequency 2020-09-21 16:10:20 +09:00
geeksville
3c0429deee Add new factory_reset preferences option clients can set 2020-09-19 11:19:42 -07:00
Kevin Hester
5fb0bf2575
Merge branch 'master' into anz 2020-09-18 10:19:43 -07:00
geeksville
d3e28e3e2c Merge branch 'dev' 2020-09-17 11:20:41 -07:00
r51n
91305c2c84
add AU/NZ channel definitions 2020-09-17 12:02:38 +00:00
Jm Casler
c83ff03d66
Merge pull request #4 from meshtastic/master 
Updating form head
 2020-09-16 22:51:19 -07:00
geeksville
8e988cc926 fix #397 from @a-f-G-U-C - bogus GPS positions during locking could be reported 
btw - from my read of the NMEA, the lowest value that means 'has a valid
position' is 1 not 2.  But I only know this because you pointed me at
it ;-)

Thanks!
 2020-09-16 09:18:44 -07:00
geeksville
8c240b59f6 fix #393. immediately save node db to disk if user changes name 2020-09-16 09:08:35 -07:00
geeksville
3e64d8439d Merge branch 'master' into dev 2020-09-15 21:13:24 -07:00
geeksville
435c955acd make hash prototype a bit stricter 2020-09-15 21:05:57 -07:00
Jm Casler
c656a95a84
Merge pull request #3 from meshtastic/master 
Update from meshtastic main
 2020-09-15 20:34:30 -07:00
geeksville
c6d93d1a28 fix #346 limit tx power in japan 2020-09-15 18:54:50 -07:00
geeksville
7d4058f49d let users set 20 dBm if they wish 2020-09-15 18:00:21 -07:00
geeksville
31fc8fafec make default power level radio chipset specific 2020-09-15 17:55:33 -07:00
Jm Casler
e508306395 Refactoring to break out HTTP from WiFi 2020-09-13 16:58:36 -07:00
Jm Casler
f129b458ad Initial Checkin for WiFi and HTTP Server Framework 2020-09-12 21:43:41 -07:00
geeksville
92df77f228 Merge remote-tracking branch 'root/master' into dev 2020-09-11 18:15:13 -07:00
geeksville
ee27c15c2c likely fix for bug #373. fix #339. great gps fixes from @a-f-G-U-C 
fixes described in bug #376
 2020-09-10 09:25:10 -07:00
geeksville
f3d38d84c9 fix nrf52 build 2020-09-07 13:03:37 -07:00
geeksville
2a067e7f6b make gps optional. Portduino almost works in sim! 2020-09-06 14:45:43 -07:00
geeksville
fefd3d78f3 Portduino WIP now compiles but does not link 2020-09-05 12:34:48 -07:00
geeksville
6a475d8288 WIP 2020-09-04 17:23:17 -07:00
geeksville
6cdaf8c600 fix #349 channel suffix letter didn't match between device and phone 2020-08-30 12:38:15 -07:00
geeksville
8dc4492ba3 add taiwan frequencies 2020-08-30 12:20:43 -07:00
geeksville
dffb6c2f06 If display is on on the @BigCorvus board and we xmit the board browns out? 2020-08-28 17:38:23 -07:00
geeksville
7f214ffbb0 TFT kinda correct now - but slow because of bit banging 2020-08-28 15:33:33 -07:00
geeksville
de196810a2 add debugging for SNR values on SX1262 2020-08-25 12:06:36 -07:00
geeksville
ff885ef215 Merge remote-tracking branch 'root/post1' 2020-08-21 10:50:49 -07:00
geeksville
d7a1cef046 fix #327 always factory reset the GPS once 2020-08-21 10:14:03 -07:00
geeksville
ca75dcd64d Add support for SX1262 based TBEAMs, see below for more details. 
We probe dynamically for the SX1262 or RF95 based radios on TBEAM1.0
boards now.  If either is present it will be used.
 2020-08-20 15:42:36 -07:00
geeksville
781077e799 Turn on buck converter for @BigCorvus board, now radio works 2020-08-17 11:42:19 -07:00
geeksville
9b25818a50 fix #249: report battery levels even if no GPS lock 
@professr I noticed you added a "newStatus" observable to the GPS class.
Do you remember why you didn't remove the old GPS status (which seemed
to be dumber).  Is it just because you didn't want to risk breaking
MeshService?  (I assume) In this change I removed the old Observable
and all seems well (just using newStatus everywhere).
 2020-08-12 15:51:57 -07:00
geeksville
55dafcbecb fix #269 see below 
/**
 * Generate a short suffix used to disambiguate channels that might have the same "name" entered by the human but different PSKs.
 * The ideas is that the PSK changing should be visible to the user so that they see they probably messed up and that's why they
their nodes
 * aren't talking to each other.
 *
 * This string is of the form "#name-XY".
 *
 * Where X is a letter from A to Z (base26), and formed by xoring all the bytes of the PSK together.
 * Y is not yet used but should eventually indicate 'speed/range' of the link
 *
 * This function will also need to be implemented in GUI apps that talk to the radio.
 *
 * https://github.com/meshtastic/Meshtastic-device/issues/269
 */
const char *getChannelName();
 2020-08-12 11:04:03 -07:00
geeksville
178958c165 allow advanced users to specify channel numbers if they wish 2020-08-12 10:46:44 -07:00
geeksville
d7cf7e2eb4 Allow advanced users to set arbitrary spreadfactor/codingrate/bandwidth 2020-08-12 10:42:25 -07:00
geeksville
047141eb34 make TXEN/RXEN immediately low once changed to be outputs 2020-08-03 11:29:26 -07:00
geeksville
12bf3795ea less logspam when debugging the serial API 2020-08-02 12:55:22 -07:00
geeksville
a5b7501a4e nimble add debug output 2020-07-24 10:12:25 -07:00
geeksville
014eea2f56 Nimble sleep almost works 2020-07-22 21:26:32 -07:00
geeksville
9e10ce487c Merge branch 'master' into post1 2020-07-18 13:32:30 -07:00
geeksville
d9f43d3e2f update protobufs related to https://github.com/meshtastic/Meshtastic-device/issues/269 2020-07-18 09:12:51 -07:00
geeksville
98dfecdb79 Add external RF switch management for RF95 (needed for RAK815) 2020-07-13 13:18:32 -07:00
geeksville
e12c057c31 RAK815 lora works 2020-07-10 14:37:01 -07:00
geeksville
dc54e7331f memory is tight on the nrf52832 board (for now) - so don't allocate too much 2020-07-10 13:52:26 -07:00
geeksville
311d1a56b4 make a bare nrf52840dk build which will work for everyone 2020-07-09 20:05:39 -07:00
geeksville
ed589727d6 Update NRF52 build to work again 2020-07-09 19:57:55 -07:00
grcasanova
9803141fe7 merged with master 2020-07-06 21:53:10 +02:00
grcasanova
92b30ebec6 fixes now compiles 2020-07-06 10:45:55 +02:00
Ellie Hussey
6f7f540c79
Added the option for forced NodeStatus updates on user change or text message, tweaked compass (#256) 2020-07-05 17:03:12 -07:00
Professr
f5b7c33d4e Refactored status handlers and merged 2020-06-28 18:17:52 -07:00
Professr
542b8b26ce Abstracted statuses, made display event-driven 2020-06-27 21:19:49 -07:00
geeksville
e7eee0995a fix line endings 2020-06-24 16:14:38 -07:00
geeksville
9f6e23754c Add a no_save development flag to allow using settings that 
we don't want to save to flash.  Use that flag to guard BLE
stress testing code that makes device repeatedly sleep wake
to force numerous BLE resets
 2020-06-24 13:10:36 -07:00
geeksville
60470211e5 expose battery level via the standard BLE battery service 2020-06-22 10:04:26 -07:00
geeksville
c5851a4a0c Report battery level to other nodes in mesh (and apps). 
Also today I'll turn back on the the standard "has a battery" BLE
device profile, so the locally connected radio should show up in the
phone's bluetooth popup of battery levels (similar to how a BLE
headphone battery level appears)

cc @lgoix - using code from @professr

```
meshtastic --info
Connected to radio...
my_node_num: 2883444536
has_gps: true
num_channels: 13
region: "unset"
hw_model: "tbeam"
firmware_version: "unset"
packet_id_bits: 32
current_packet_id: 91018534
node_num_bits: 32
message_timeout_msec: 300000
min_app_version: 172

preferences {
  position_broadcast_secs: 900
  send_owner_interval: 4
  wait_bluetooth_secs: 120
  screen_on_secs: 300
  phone_timeout_secs: 900
  phone_sds_timeout_sec: 7200
  mesh_sds_timeout_secs: 7200
  sds_secs: 31536000
  ls_secs: 3600
}
channel_settings {
  tx_power: 23
  modem_config: Bw125Cr48Sf4096
  psk: "\324\361\273: )\007Y\360\274\377\253\317Ni\277"
  name: "Default"
}

Nodes in mesh:
{'num': 2883444536, 'user': {'id': '!2462abdddf38', 'longName': 'Unknown df38', 'shortName': '?38', 'macaddr': 'JGKr3d84'}, 'position': {'altitude': 96, 'batteryLevel': 100, 'latitudeI': 375210641, 'longitudeI': -1223090398, 'time': 1592843564, 'latitude': 37.5210641, 'longitude': -122.3090398}}
```
 2020-06-22 09:36:19 -07:00
geeksville
8190098bb8 experiment with wifi connections for nodes 2020-06-21 14:11:38 -07:00
geeksville
7678540a93 For #187 was not reporting GPS status on new API 2020-06-17 17:25:55 -07:00
geeksville
463666aec5 oops - can't call DEBUG_MSG this early on ESP32 2020-06-17 16:04:37 -07:00
geeksville
03f019dea2 memory size debugging 2020-06-16 19:55:14 -07:00
geeksville
a47524b762 cubecell wip 2020-06-16 17:13:26 -07:00
geeksville
f35b15b09c Shrink devicestate for small mcus 2020-06-16 15:26:30 -07:00
geeksville
99dac51b9d Don't use a (huge - 16KB) scratch buffer for device state loading 2020-06-16 15:02:11 -07:00
geeksville
d9ab6986ad per @dafeman 1.8V works on E22 2020-06-16 12:02:13 -07:00
geeksville
514d45c219 oops supposed to be TXEN 2020-06-16 06:38:08 -07:00
geeksville
60ad1793e4 sx1262 improvements attn @dafeman 2020-06-16 06:26:21 -07:00
geeksville
477c62082d E22 SX1262 module now works! 
Thanks mostly to an old github comment by @beegee-tokyo the fix was easy
(comment here https://github.com/jgromes/RadioLib/issues/12#issuecomment-520450429)

We now set DIO3 to 2.4 volts to power the oscillator inside the E22
module (undocumented in the E22 docs)
 2020-06-15 14:38:09 -07:00
geeksville
aadba1f694 add printPacket for debug printing packets 2020-06-14 15:30:42 -07:00
geeksville
13307c502f misc debug output 2020-06-13 16:29:53 -07:00
geeksville
8caa075bc6 used fixed pool allocator for now - since that's how we've been testing 2020-06-13 11:05:36 -07:00
geeksville
dc7469c64b useful bluetooth debugging output 2020-06-13 08:29:25 -07:00
geeksville
f54b18f733 each tx packet might have a retransmission/ack copy, make pool bigger 2020-06-13 08:27:44 -07:00