* Update E-Ink display after sending adhoc ping or disable/enable GPS
* Resume display updates when touch button pressed
* Use touch hold as modifier; change double-click behavior for user button
* Fix preprocessor exclusions
* Purge backlight behavior
* Distinguish between 3x and 4x multi-presses
* Touch button considers "Wake screen on tap or motion" user-setting
* Don't assume device has BUTTON_PIN
* Rename misleading method
* remove redundant logic
* Handle special screens for old EInkDisplayClass
* Handle special screens for EInkDynamicDisplay class
* Join an async refresh in progress to avoid skipping screensaver
* attempt trunk fix
* fix Wireless Paper double-clear screen at boot
* log when flooded with "responsive" frames
* show the "resuming" screen when waking from deep-sleep
* rename drawDeepSleepScreen
avoid future confusion with "Screen Paused" screen
* show a screensaver frame when screen off
The frame shown during deep sleep is now also passed through showScreensaverFrames()
* Add macros for E-Ink color values.
OLEDDISPLAY_COLOR is inverted. Result of light-mode on E-Ink vs dark-mode on OLED?
* adapt drawDeepSleepScreen to new screensaver convention
* Mark Wireless Paper V1.1 as having problems with ghosting
Any other issues can be marked in a similar way, then handled in code where relevant
* Change screensaver from fullscreen logo to overlay
* identify "quirks" rather than "problems"
* move async refresh polling from display() to a NotifiedWorkerThread
* Prevent skipping of deep-sleep screen
(Hopefully)
* Redesign screensaver overlay
Now displays short name
* Optimize refresh for different displays
* Support older EInkDisplay class
* Don't assume text alignment
* fix spelling of a quirk macro
(No impact to code, but avoids future issues)
* Handle impossibly unlikely millis() overflow error
Should have just let it go, but here we are..
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor EInkDisplay
A lot of variant specific code is merged, with the macros pushed to the respective variant.h files.
"Dynamic Partial" code has been purged, pending a rewrite.
* fix: declare class only if USE_EINK, init all members
* refactor: move macros to platformio.ini
Responds to https://github.com/meshtastic/firmware/pull/3299#issuecomment-1966425926
* fix: EInkDisplay::connect() references old macros
Usage was in a block of variant-specific code, which had been intentionally left untouched.
* fix: remove duplicate macros from variant.h
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix Heltec Tracker Screen issues
Fix Heltec Tracker Screen issues like wrong offsets, display size and screen not shutting down.
Divides board into two different envs for 1.0 and 1.1 version PCB
* Helteck wireless tracker default version V1_1
* rename heltec tracker 1.1 - trunk fmt
rename varian of heltec tracker 1.1 to "heltec tracker" to be retro-compatible.
Trunk formatting.
* Heltec Tracker increase Screen update to 3Hz
Heltec Tracker increase Screen update to 3Hz from 1Hz
Use a mixture of full refresh, partial refresh, and skipped updates, balancing urgency and display health.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
E-ink panel is DEPG0213BNS800. Otherwise, identical to v1.1 (?)
Partial refresh supported, but not implemented in this commit.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add Chatter 2 default_envs
* Add Chatter 2 to varients
* Add Chatter 2 specific code to esp32 platform code
* Parameterize TFT_INVERT for Chatter 2 and specify setRotation to 1
* Fix formatting to make Trunk happy
* Remove commented out #define USE_LCC68
* Fix formatting again
* Add chatter2 to the CI matrix
---------
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* Move to Portduino's getMacAddr()
* Add ST7735/S screen support
* Push Raspbian support into native target
* Remove latent pigpio references.
* CardKB defensive programming
* Adds configurable spidev
* Fixes to build on Fedora 40
* ENUMs are not #defines. Pull latest portduino
* Add more configuration options for SPI displays
* Add config.yaml option to set DIO3_TCXO_VOLTAGE
* change tft clear() to fillScreen()
Maintains compatability with ESPI driver.
* Adds TXen and RXen pins to portduino
* Add -c --config options to specify config file
* Fail when a specified config file is unavailable
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Attempts at getting the Heltec Wireless Paper eink operational
* Bogus comment
* Fixing Support For Heltec Wireless Paper
---------
Co-authored-by: NfN Orange <orange@reveb.la>
