5312 Commits

Author	SHA1	Message	Date
Blake-Latchford	8fcfe7f28b	Read voltage during init fixes #5276 (#5332) ... Power::readPowerStatus is called on startup, but AnalogBatteryLevel::getBattVoltage skips the read because 5 seconds have not elapsed since last_read_time_ms, which is initialized to zero. `batMv=3100` is reported because AnalogBatteryLevel::last_read_value is initialized as: ``` float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS); ```	2024-11-13 04:13:55 -06:00
GUVWAF	e866734a25	Handle repeated packet after potentially canceling previous Tx (#5330) ... * Revert "Fix sending duplicate packets to PhoneAPI/MQTT (#5315)" This reverts commit 40bc04b521. * Handle repeated packet after potentially canceling previous Tx	2024-11-12 15:23:32 -06:00
Matthijs De Smedt	2ec3958cd8	Add support for ignoring nodes with is_ignored field in NodeInfo (#5319) ... * Add support for is_ignored bool in NodeInfo * is_ignored is not a boring node either * Clean out metrics and position * Clear the key too --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-12 13:27:44 -06:00
GUVWAF	f4b0e19a65	Fix another heap leak (#5328)	2024-11-12 10:59:29 -06:00
Ben Meadors	a84324c4fa	Don't attempt to save NodeDB on low-batt shutdown to prevent FS corruption (#5312)	2024-11-12 06:17:26 -06:00
Michael Gjelsø	0acccdfe2d	Don't send to public channel (#5310) ... * Don't send to public channel `p->to` wasn't set and had the same value as broadcast, it's now set to our own NodeNum. * Trunk * Update DetectionSensorModule.cpp Take 3 * Revert NodeNum()	2024-11-11 19:11:54 -06:00
github-actions[bot]	0e4f7003c7	[create-pull-request] automated change (#5320) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-11 18:55:02 -06:00
GUVWAF	40bc04b521	Fix sending duplicate packets to PhoneAPI/MQTT (#5315) ... * Fix potential duplicate packets to PhoneAPI/MQTT * Fix include error for STM32 * Fix cppcheck error	2024-11-12 07:54:05 +08:00
Thomas Göttgens	eb8d38a7e9	radiolib update (#5246) ... * update radiolib to 7.1.0 * stay at 7.0.2 for STM32, also remove unused board from ESP32 arch --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-11 16:05:48 +01:00
Ben Meadors	3d5eb34c5c	Add back some details to the PhoneAPI logs (#5313)	2024-11-11 07:01:29 -06:00
Ben Meadors	3a9a4bbb92	Coerce minimum neighborinfo interval on startup (#5314)	2024-11-11 07:00:56 -06:00
Daniel.Cao	6eba2789d0	rak10701 (rak wismeshtap) optimization (#5280) ... * Improve the processing speed of virtual keyboards * Remove the disable GPS feature, as it would interfere with the normal use of TFT * Changed the default screen sleep time to 30s * Rename platform rak10701 -> rak wismeshtap * Fixed rak wismeshtap turned off gps caused the screen not to display * Reduce the size of the flash, otherwise uf2 will not work Co-authored-by: Daniel Cao <daniel.cao@rakwireless.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-11 13:37:43 +01:00
GUVWAF	9b4c260a92	Fix memory leak in MQTT (#5311)	2024-11-11 13:22:22 +01:00
Ben Meadors	667b4ef0f2	Exclude some niche modules by default and populate exclude_modules (#5300) ... * Exclude some niche modules by default * Start of intelligently excluding modules --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-11-10 13:36:49 -06:00
Tom Fifield	623203ca3b	Remove scary warning about full NodeDB (#5292) ... NodeDB becoming full at 100 entries and cycling out old entries is normal behaviour. The user doesn't need to take any action and shouldn't be concerned when this happens. Remove the warning from the screen and reduce loglevel to info.	2024-11-09 07:30:04 -06:00
GUVWAF	893efe4f11	Always set the channel corresponding to a node (#5287)	2024-11-09 11:30:12 +08:00
GUVWAF	2c2213ef9b	Add setting to transmit NeighborInfo over LoRa (#5286) ... * Add setting to transmit NeighborInfo over LoRa Only if not using the default channel * Bump minimum broadcast interval for NeighborInfo to 4 hours	2024-11-09 09:38:48 +08:00
github-actions[bot]	439c1dec08	[create-pull-request] automated change (#5284) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-08 07:53:55 -06:00
Tavis	aa184e6d8b	copy the has_relative_humidity value to telem packet from AHTX0 packet (#5277) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-08 07:59:36 +08:00
Marco Veneziano	2eea412f1c	Fixed compile error when using GPS_DEBUG (#5275)	2024-11-07 16:19:31 -06:00
Thomas Göttgens	b0a5a26f58	fix wio-tracker-dev sensor scan (#5274)	2024-11-07 18:01:58 +01:00
Austin	286f3c6458	uClibc compatibility (#5270) ... * uclibc compatibility Adds compatibility with uclibc, the officially supported toolchain of the luckfox pico * Explicitly link stdc++fs for std::filesystem Bringing this over from buildroot-meshtastic	2024-11-07 14:23:08 +01:00
github-actions[bot]	b506f6dcb0	[create-pull-request] automated change (#5272) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-07 07:17:23 -06:00
Ben Meadors	73e2e25eb1	Smarter traffic scaling (#5264)	2024-11-06 15:00:53 -06:00
GUVWAF	3bd3911913	Only PKC encrypt when packet originates from us (#5267)	2024-11-06 22:00:26 +01:00
Ben Meadors	982190936d	More log reductions. I'll probably stop now ;-) (#5263)	2024-11-06 21:03:25 +08:00
Ben Meadors	8498b175e7	Add exception for RTC to not strip time from position (#5262) ... * Add exception for RTC to not strip time from position * t	2024-11-06 10:06:43 +08:00
Timo	8e2a3e5728	fix display of umlauts (UTF-8 left byte C3) (#5252)	2024-11-05 04:36:37 -06:00
Ben Meadors	f769c50fa5	More reduction (#5256) ... * Now with even fewer ings * Ye * Mo * QMA6100PSensor	2024-11-04 19:15:59 -06:00
GUVWAF	7ba6d97e99	Release no-LoRa packet after sending to phone (#5254)	2024-11-04 14:13:54 -06:00
GUVWAF	f3b698905d	Disable automatic NodeInfo request when NodeDB is full (#5255)	2024-11-04 14:06:12 -06:00
Ben Meadors	50dac38a1b	Pass#2: Lots more savings in logs and string reduction surgery (#5251) ... * Pass#2: Lots more savings in logs and string reduction surgery * Don't need Thread suffix either * Warn	2024-11-04 12:16:25 -06:00
Tom Fifield	e71be778dd	Fix cppcheck HIGH error (#5250) ... https://github.com/meshtastic/firmware/pull/5247 introduced new protobufs, particularly the excluded_modules feature. Immediately afterward, cppcheck started sounding klaxons about an unitialized variable. This patch simply sets excluded_modules to none as a temporary measure while the feature from protobuf is integrated into code.	2024-11-04 07:03:50 -06:00
Tom Fifield	276067065e	Log cleanups (#5135) ... * Log cleanups change log levels, shorten log messages, delete commented out logs * Address comments from review * Remove full stops * EDEBUG --> DEBUG	2024-11-04 06:09:23 -06:00
github-actions[bot]	a628c93125	[create-pull-request] automated change (#5247) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-04 05:40:55 -06:00
Ben Meadors	03aaaafa13	Exclude preferred routing roles from nodeinfo interrogation behavior (#5242) ... * Exclude prefered routing roles from nodeinfo interrogation behavior * Exclude prefered routing roles from nodeinfo interrogation behavior * Update MeshService.cpp * Rework logic to prevent spammy router logs	2024-11-04 19:05:03 +08:00
Thomas Göttgens	0a82fd28b3	PIO_ENV (#5239) ... * add hw_env to packet needs https://github.com/meshtastic/protobufs/pull/616 * rename to pio_env * Move to mynodeinfo * Includy doody --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-03 20:02:13 -06:00
github-actions[bot]	89c186e662	[create-pull-request] automated change (#5243) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-03 19:48:50 -06:00
github-actions[bot]	8c99f913c1	[create-pull-request] automated change (#5241) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-03 16:18:38 -06:00
Austin	9415254dda	musl compatibility (#5219) ... * musl compat * trunk fmt * Update platform-native, including musl fix https://github.com/meshtastic/platform-native/pull/5 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-03 14:24:04 +01:00
Tom Fifield	448c754882	LR1110 - remove old comment referring to non-existent function. (#5233) ... It seems like there was no setrxgain function in RadioLib. Since we're unlikely to uncomment and enable this non-existent feature, remove this code.	2024-11-03 14:14:06 +01:00
GUVWAF	da7424a604	Improve ACK logic for responses and repeated packets (#5232) ... * Don't send ACKs to responses over multiple hops * Move repeated sending logic to `wasSeenRecently()` * Add exception for simulator for duplicate packets from PhoneAPI * Add short debug message	2024-11-03 06:21:45 -06:00
Tom Fifield	1bec23b6bb	Fix displays showing "GPS Not Present" until first lock (#5229) ... https://github.com/meshtastic/firmware/pull/5160 introduced a change which made first publication of GPS information take up to 15mins. For that initial period, displays would show "No GPS Present", even if one was detected. This change fixes that bug, triggering publication immediately after a GPS module is detected.	2024-11-03 06:19:15 -06:00
Technologyman00	bee474ee54	Spell check all Code (#5228) ... * Spelling Fixes * More Spelling Errors * More Spelling Checks * fixed wording * Undo mesh\generated changes * Missed one file on readd * missed second file	2024-11-03 09:25:05 +08:00
Tom Fifield	b0c924f185	Optimise GPS Baud Rate cycle (#5102) ... * Optimise GPS Baud Rate cycle Previously, our baud rate cycled through one list twice. There were some rarer baudrates in there, so this code separates out those into a dedicated list that is only run through if detection fails for common bauds. We also only run through each baud rate once. * Fix first time around bug Would have always reset GPS baudrate every time. * Add support for fixing GPS_BAUDRATE If GPS_BAUDRATE is set in variant.h, the deployer knows something we don't about the GPS. Used especially when the GPS is soldered to a board in a commercial product :) If we see that, we don't try other baud rates at all. * Don't print blank lines in GPS_DEBUG. * Try GPS_BAUDRATE first, not only. * Fix spelling mistakes in comments * Only use GPS_BAUDRATE if specified in variant.h * Modify RareSerial Speeds based on FIXED or not.	2024-11-02 07:51:12 -05:00
github-actions[bot]	8801bc5ce9	[create-pull-request] automated change (#5223) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-11-02 05:58:06 -05:00
Jonathan Bennett	cf476eb87c	Remove assert in mesh-pb-constants.cpp (#5207) ... * Remove assert in mesh-pb-constants.cpp * Add raw packet output to portduino trace logging. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-02 05:38:44 -05:00
todd-herbert	ba2f25293b	Fix flipped logic after move to Throttle::isWithinTimespanMs (#5221)	2024-11-02 05:36:40 -05:00
GUVWAF	2d4d36c605	Drop oldest packet from radio when queue is full (#5212) ... And still notify Router Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-11-01 15:48:55 -05:00
Ben Meadors	cbe74009a9	Comment out unused var to get rid of warning	2024-11-01 15:46:11 -05:00
Ben Meadors	701421b50a	Trunk fmt	2024-11-01 15:17:25 -05:00
Aaron.Lee	336cdc0efe	Add Heltec V3 battery read pin detect function (#5196)	2024-11-01 15:12:41 -05:00
Ben Meadors	a1ac358b0a	Don't try to count non-lora transmissions into airtime (or attempt to decode) (#5215) ... * Don't try to count non-lora transmissions into airtime (or attempt to decode) * Don't need to check utilization anymore	2024-11-01 13:20:11 -05:00
Jonathan Bennett	545ebf9b17	Don't skip GPS serial speeds, and always land on GPS_BAUDRATE (#5195) ... * Don't skip GPS serial speeds, and always land on GPS_BAUDRATE * Update log message to match. * print the value instead	2024-11-01 08:44:02 +08:00
Alexander Begoon	600208ab0b	Refactor getMacAddr function to retrieve MAC address as MAC-48 for IEEE 802.15.4 compatibility (#5208)	2024-10-31 15:07:59 -05:00
GUVWAF	462a0718cf	Fix SerialModule getting packet from ourselves (#5206)	2024-10-31 11:46:00 -05:00
Andre K	28b469dbf0	fix: don't broadcast public keys if the user is licensed (#5190) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2024-10-30 12:05:09 -05:00
Ben Meadors	5f6e19d971	As a Router	2024-10-30 06:02:59 -05:00
Jonathan Bennett	b3ba23b4e8	Don't generate or populate PKC keys in licensed mode	2024-10-29 14:17:14 -05:00
Ben Meadors	936260fca3	Default rebroadcast mode for Router and Repeater to ignore problematic portnums (#5178) ... * Default rebroadcast mode for Router and Repeater to ignore problematic portnums * Verbiage * IS_ONE_OF	2024-10-29 05:44:32 -05:00
Tom Fifield	2945b9cfbe	De-duplicate Ambient LED management code (#5156) ... We currently have 4 different places where we have the logic for modifying LED state of the various types of Ambient LEDs, ExternalNotificationModule::SetExternalOff ExternalNotificationModule::SetExternalOn AmbientLightingThread::setLighting AmbientLightingThread::setLightingOff This patch de-duplicates the methods in ExternalNotification to a single method, using a boolean to toggle whether we're turning things on or off.	2024-10-29 05:41:21 -05:00
Megaceryle-alcyon	ed03d28a83	Added PA1616S GPS module (#5157) ... * Added GPS chip PA1616S GPS chip PA1616S is used in some recent Adafruit GPS breakout boards. * Update GPS.cpp --------- Co-authored-by: picusviridis <mesh.culprit381@passmail.net>	2024-10-29 09:34:01 +01:00
Jonathan Bennett	850f61d2d0	Native config.d (#5165) ... * Add support for loading yaml from a config directory * Add waveshare hats to the new config.d approach * Move to available.d for module inactive module configs	2024-10-28 21:48:10 -05:00
Ben Meadors	e12fd27b49	Trunkdor the burninator	2024-10-28 06:40:48 -05:00
Spiffysec	77dfc92f1e	Update GPSUpdateScheduling.cpp (#5160) ... * Update GPSUpdateScheduling.cpp Default value is too short, resulting in unstable GPS locks on T1000-E (possibly others). Fix has been tested an confirmed working with no adverse effects, by multiple users. Also discussed at length on Discord * Coerce minimum instead of hardcode * config --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-28 06:18:03 -05:00
github-actions[bot]	c4eb9a6d7f	[create-pull-request] automated change (#5176) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-28 06:16:06 -05:00
Tom Fifield	c071eed6a3	cherry-pick: unphone support (#5174) ... * unphone part 1 * Unphone support * update HWid unphone --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-10-28 09:25:25 +01:00
Jonathan Bennett	82145e0661	Cherry picks (#5166) ... * fix compiler error std::find() * fix wifi/bt connection status * try-fix crash * added 1200baud reset --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2024-10-28 10:21:57 +10:00
mverch67	94ff67e927	fix spiLock in RadioLibInterface	2024-10-27 10:55:23 +01:00
mverch67	a8bd1ee0da	stability: add SPI lock before saving via littleFS	2024-10-26 16:01:46 +02:00
github-actions[bot]	2568d4fcd8	[create-pull-request] automated change (#5153) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2024-10-26 15:51:28 +02:00
Thomas Göttgens	adf1bc4b0e	fix tracker build (#5151) ... fix tracker 1000 build	2024-10-26 14:40:10 +02:00
Tom Fifield	e394bc6f8f	De-duplicate log-level determination (#5148) ... RedirectablePrint had a method, getLogLevel, which did exactly what code in SerialConsole did. Let's use that method rather than duplicating the code.	2024-10-26 12:06:50 +02:00
Tom Fifield	a0e468b16e	Remove unused AXP debug code (#5149) ... This was shuffled around a couple years ago, but hasn't been used since, and we had two copies in the code. Delete it.	2024-10-26 12:04:46 +02:00
Thomas Göttgens	93318b4f56	T1000-E Peripherals (#5141) ... * T1000-E Peripherals - enable intelligent charge controller signals - enable Accelerometer - enable internal I2C bus - provide Power to Accelerometer * POC Accelerometer Code (wakeScreen is moot for that device, just test if the driver works) * fix building without the sensor	2024-10-26 12:03:28 +02:00
Manuel	701293c2d3	fix missing includes (#5138)	2024-10-24 21:58:24 +02:00
github-actions[bot]	6485f037ec	[create-pull-request] automated change (#5133) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-23 21:21:49 -05:00
Ben Meadors	ca5f71f774	Add device unique id (#5092) ... * Add device unique id * Trunk * WIP * Esp32 implementation * Trunk * Check for ESP_EFUSE_OPTIONAL_UNIQUE_ID * Comment print * Trunk	2024-10-23 21:18:37 -05:00
panaceya	57667f1028	ADD: Configurable UPLINK_ENABLED and DOWNLINK_ENABLED in userPrefs.h (#5120)	2024-10-23 05:26:44 -05:00
github-actions[bot]	4416ac57cf	[create-pull-request] automated change (#5124) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-21 16:06:56 -05:00
Robert	a4705d2c19	add RFC 3927 IP address space to private IP checks (#5115) ... Add the RFC 3927 IP address block (169.254.0.0/16), also referred to as IPIPA, to the private address checks for MQTT functionality.	2024-10-21 19:25:27 +11:00
aussieklutz	5ff8c904c8	MPR121 Touch IC Based Keypad Input Module (#5103) ... Implements an input driver utilising the MPR121 Touch IC and is compatible with common MPR121 keypad PCB's. - Implements a "candybar" phone style 12-key keypad - multiple taps to rotate through the character set - longpress for navigation keys - keymap to allow arbitrary routing of MPR121 pin to button configuration - extendable to other key functions - Integrates with the existing kbI2cBase implementation - Works with CannedMessageModule Freetext mode - Can be used with common MPR121 boards, such as https://www.amazon.com/MPR121-Capacitive-Keyboard-Buttons-Sensitive/dp/B083R89CHB/ref=sr_1_6 - Of use for PCB based radios, where some form of low surface area low component freetext input is required, but also without consuming too many IO pins. - Tested on a T3S3 connected to Wire1 (Second) interface. - Demonstration of functionality: https://youtu.be/UI6QP6nGvhY	2024-10-21 17:53:36 +11:00
GUVWAF	09c8642aa6	Fix rebroadcasting encrypted packets when KNOWN_ONLY or LOCAL_ONLY is used (#5109)	2024-10-20 17:04:45 -05:00
Thomas Göttgens	18ca5b4449	Wide_Lora uses 12 symbols to be compatible with SX1280	2024-10-20 21:54:07 +02:00
Tom Fifield	2ba72c154a	Fix GPS_DEBUG output (#5100) ... After the recent change to move logging line breaks to a central location, GPS_DEBUG is now emitting one character per line, making the logs unusable. Patch uses local strings and appends to collate and then print in the right places. Fixes https://github.com/meshtastic/firmware/issues/5099 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-20 04:46:25 -05:00
Ben Meadors	7e3931b05d	Move 115200 baud GNSS probe earlier (#5101) ... * Move 115200 baud GNSS probe earlier * Even more optimized!	2024-10-19 20:05:52 -05:00
Ben Meadors	4575352d8c	Initial NODENUM_BROADCAST_NO_LORA implementation with NeighborInfo module (#5087) ... * Initial NODENUM_BROADCAST_NO_LORA implementation with NeighborInfo module * isBroadcast * Trunkt	2024-10-19 12:48:00 -05:00
github-actions[bot]	b8b6894d58	[create-pull-request] automated change (#5091) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-18 06:00:55 -05:00
Technologyman00	934be69663	Add buzzer feedback on GPS toggle (#5090) ... Triple Press on buttons toggles GPS enable/disable. This enhancement plays a triple-beep so that users of devices with buzzers can get audible feedback about whether they have turned the GPS off or on. This is especially valuable for screenless devices such as the T1000E where it may not be immediately obvious the GPS has been disabled.	2024-10-18 14:40:18 +11:00
Ben Meadors	ec9e562a77	Coerce minimum telemetry interval of 30 minutes on defaults and make new default interval one hour (#5086) ... * Coerce minimum telemetry interval of 30 minutes on defaults and make new default interval one hour * Smaller log messages	2024-10-17 13:33:52 -05:00
Johnathon Mohr	fbb6778415	Account for port specification with IP address for MQTT server. Some additional format validation. (#5084)	2024-10-17 05:05:35 -05:00
Johnathon Mohr	3e5f129fce	Ensure the MQTT address is an IPv4 before determining it's private (#5081) ... * Ensure the mqtt address is an IPv4 (or at least not a domain) before determining it's private. * check address length	2024-10-16 05:19:00 -05:00
Johnathon Mohr	ad214ea42a	Add MQTT exception for private IP address server (#5072) ... Determines if the given IP address is a private address, i.e. not routable on the public internet. These are the ranges: 127.0.0.1, 10.0.0.0-10.255.255.255, 172.16.0.0-172.31.255.255, 192.168.0.0-192.168.255.255. If so, allow MQTT publication the same as existing localhost support.	2024-10-16 11:08:49 +11:00
Jeff Epler	25b557cf46	Fix incorrect va_start calls (#5076)	2024-10-15 17:15:10 -05:00
Tavis	696bcc60af	Ws85 updates : set want_ack, high_priority, add temperature. (#5052) ... * ws85 updates add temperature add wantack add high_priority set lull to 0 if never set. add the has_FIELD_NAME lines to ws85 * pbufs sync * high insteaed of max reliability * only set want_ack and high reliable if sensor_role set * protobufs --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-10-15 05:09:18 -05:00
Andre K	af0db8a29f	retain fixed_position during reset-nodedb (#5067)	2024-10-14 19:32:25 -05:00
Ben Meadors	420ab89f8d	Merge branch 'master' into oem-proto	2024-10-14 14:10:31 -05:00
github-actions[bot]	1212969ff7	[create-pull-request] automated change (#5062) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-14 14:10:19 -05:00
Thomas Göttgens	e49e584ae1	drop oem.proto support in favor of userprefs	2024-10-14 19:39:07 +02:00
github-actions[bot]	655e58f424	[create-pull-request] automated change (#5058) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-14 07:49:58 -05:00
Ludovic BOUÉ	0ec1684718	[Board]: Support for M5Stack CoreS3 (Part 1: radio) (#5049)	2024-10-14 19:13:22 +11:00
Thomas Göttgens	05e4a639a1	remove newline from logging statements. (#5022) ... remove newline from logging statements in code. The LOG_* functions will now magically add it at the end. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-14 15:11:43 +11:00
Ben Meadors	fb9f361052	Implement rebroadcast mode NONE (#5040) ... * Implement rebroadcast mode none * Correct debug message	2024-10-12 06:17:44 -05:00
mverch67	363fd8ab98	fix GPIO0 mode after I2S audio	2024-10-12 10:24:41 +02:00
github-actions[bot]	9d0729c83f	[create-pull-request] automated change (#5034) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-11 06:29:30 -05:00
Mark Trevor Birss	ec96256bcd	Update main.cpp	2024-10-11 11:39:37 +02:00
Ben Meadors	1f2d972e18	Remove waypoint and text message frames on NodeDB reset as well (#5029)	2024-10-10 19:24:37 -05:00
github-actions[bot]	cc87002a8a	[create-pull-request] automated change (#5028) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-10 18:31:20 -05:00
GUVWAF	d55c08d5cd	Uplink DMs not to us if MQTT encryption enabled (#5025) ... * Uplink DMs not to us if MQTT encryption enabled * Only really need to try uplinking encrypted packet if MQTT encryption is enabled * Add log about publishing nothing when packet is not decrypted and encryption_enabled is false * Improve comment	2024-10-10 15:11:58 -05:00
Ben Meadors	e8f287a36f	Fixes critical error rendering before screen thread is running (#5024) ... * Fixes critical error rendering before screen thread is running * Fix GPS thread crashing on probe code attempting to %s print an enum * 10	2024-10-10 14:58:42 -05:00
Ben Meadors	f5f9fd54a1	Revert "[create-pull-request] automated change (#5019)" (#5026) ... This reverts commit 3b21856a76.	2024-10-10 14:58:06 -05:00
Jonathan Bennett	f82585d9b0	Add localhost exception for dontMqttMeBro (#5023)	2024-10-10 14:06:47 -05:00
Tom Fifield	1b04d41b9a	Fix U-Blox detection code. (#5014) ... Recently there have been reports of intermittent difficulties detecting U-Blox chips. This patch proposes a new approach that should be more reliable. Previously we were fighting with NMEA messages to try and send binary commands. We unusually also tried changing the Baud rate of U-Blox chips, something we don't do with any other GPS. It turns out U-Blox has another method to disable NMEA messages. PUBX,40 is a text-based command, supported on all the U-Blox versions we care about that can set the rate of NMEA messages to zero. This is what we attempt to do with all other GPS and it works quite well. So this patch alters the probe code to: 1. Remove UBX binary code to stop NMEA messages 2. Remove code that tries to reset UBX chips to 9600 baud 3. Add UBX proprietary text commands messages to stop the NMEA flood 4. Improve log strings sent to the user. Tested on Ublox 6, Ublox 9, and Ublox 10 on multiple devices. Also tested on several devices with non-Ublox GPS to ensure it does not interfere with their detection (heltec-wireless-tracker, wio-tracker-wm11110)	2024-10-10 06:45:40 -05:00
github-actions[bot]	3b21856a76	[create-pull-request] automated change (#5019) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-10 06:45:22 -05:00
Thomas Göttgens	519ca9c0aa	Merge pull request #5018 from fifieldt/UC6580-QZSS ... Enable QZSS on UC6580	2024-10-10 12:19:04 +02:00
Thomas Göttgens	23a52ee625	Merge pull request #5016 from meshtastic/fifieldt-patch-1 ... Fix bug sending wrong sleep command to U-Blox chips	2024-10-10 12:18:27 +02:00
Jonathan Bennett	7ff4bafe22	Disentangle NodeDB from the CryptoEngine (#5013)	2024-10-10 18:14:11 +08:00
Tom Fifield	149620f071	Enable QZSS on UC6580 ... @allanmac noted we were not enabling QZSS on the UC6580. QZSS is an augmentation service that runs on the same frequency as GPS, so turning it on should not have any impact on usage other than improving performance for users in the Asia Pacific. Fixes https://github.com/meshtastic/firmware/issues/5009	2024-10-10 17:56:32 +08:00
todd-herbert	0cbade989e	Check whether NimBLE is instantiated before using (#5015)	2024-10-10 17:37:25 +08:00
Tom Fifield	411834afba	Fix bug sending wrong sleep command to U-Blox chips ... The "U-Blox readable" patch introduced a bug where sleep commands for the 10 and other versions were reversed.	2024-10-10 17:19:52 +08:00
Jonathan Bennett	ad8747d914	Possibly forward PKC DMs over MQTT (#5012)	2024-10-09 17:56:08 -05:00
GUVWAF	ddd4a45bc3	Ignore packets coming from the broadcast address (#4998)	2024-10-09 11:59:00 +08:00
Thomas Göttgens	4f8f96ab29	preliminary Othernet Dreamcatcher Support (#4933) ... * preliminary Othernet Dreamcatcher 2206 Support Need to adapt to 2301 final version * second target for latest revision * preliminary Othernet Dreamcatcher 2206 Support Need to adapt to 2301 final version * second target for latest revision * preliminary Othernet Dreamcatcher 2206 Support Need to adapt to 2301 final version * second target for latest revision * address comments --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-10-08 07:05:13 -05:00
Thomas Göttgens	ee5091fee5	Merge pull request #4661 from beegee-tokyo/master ... Add RAK4631 Ethernet Gateway with working JSON output to MQTT	2024-10-08 13:26:31 +02:00
Ben Meadors	a05b009379	Posthumous tronkination	2024-10-08 05:33:38 -05:00
Thomas Göttgens	5db4918413	Merge branch 'master' into master	2024-10-08 12:33:34 +02:00
TheMalkavien	a0dd7b43d5	First version of a DeepSleep state for the RP2040 (#4976) ... * Adding pico-extra utils * RP2040 can now go to deepsleep * First RP2040 DeepSleep code - TODO : do better and restore * FIX RAK11310 compilation (revert SDK + missing defines) --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-08 05:24:37 -05:00
Thomas Göttgens	b1f045cab8	Merge branch 'master' into master	2024-10-08 12:17:13 +02:00
Ben Meadors	2e5399dbe4	De-conflict MLX90614_ADDR macro	2024-10-08 05:03:43 -05:00
Thomas Göttgens	9d9258a59b	conflict resolution	2024-10-08 11:41:54 +02:00
jhps	37f294d0a6	In shutdown, on button press, wake back to application rather than into the loader. (#4997) ... Suggested by lyusupov and implemented by todd-herbert. https://github.com/meshtastic/firmware/issues/4651	2024-10-07 20:39:59 -05:00
Ben Meadors	411aedaf5d	Add health telemetry module (#4927) ... * Add stub health telemetry module * Add detection for MAX30102 Health Sensor It lives on I2C bus at 0x57, which conflicts with an existing sensor. Add code to check the PARTID register for its response 0x15 per spec. * Add detection for MLX90614 An IR Temperature sensor suitable for livestock monitoring. * Add libraries for MLX90614 and MAX30102 sensors * Fix Trunk * Add support for MLX90614 IR Temperature Sensor * Add support for MAX30102 (Temperature) * Make it build - our first HealthTelemetry on the mesh. If a MAX30102 is connected, its temperature will be sent to the mesh as HealthTelemetry. * Add spo2 and heart rate calculations to MAX30102 * Switch MLX90614 to Adafruit library Sparkfun was having fun with SDA/SCL variables which we can avoid by switching to this highly similar library. * Enable HealthTelemetry if MLX90614 detected * Change MLX90614 emissivity for human skin. * Add health screen! * Remove autogenerated file from branch * Preparing for review * Fix MeshService master sync from before. * Prepare for review * For the americans * Fix native build * Fix for devices with no screen * Remove extra log causing issues --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-10-07 19:50:44 -05:00
HarukiToreda	1c54388bb8	Toggle Bluetooth with Fn+b shortcut (#4977) ... * Toggle Blutooth with Fn+b shortcut Problem: As many are aware, ESP32 devices are known for their high power consumption. For instance, the Heltec ESP32 V3 draws around 110mA when powered on with the screen active and connected to a phone via Bluetooth. The Bluetooth radio alone is responsible for approximately 50mA of that consumption. For keyboard-based standalone devices, which rarely need Bluetooth other than for changing settings, users were forced to keep Bluetooth on regardless of necessity. There was no way to toggle Bluetooth on or off without physically connecting the device to a computer via serial or using the admin channel, which required another node for access. Solution: I implemented a new feature that allows users to turn off Bluetooth on keyboard devices by pressing Fn+b and turn it back on when needed. This enhancement significantly improves power efficiency for these devices. Result: With Bluetooth off, the device now consumes only 55mA. When combined with Power Save mode, the consumption can drop as low as 11mA, a substantial reduction from the previous 110mA. Users can still easily reconnect to a phone using the shortcut when necessary, offering greater flexibility and extended battery life. * Remove 1 reboot at least. I was able to prevent a reboot using the disableBluetooth(); command, current tested at 47-55mA, it doesn't require a reboot to turn off, but it does need reboot to turn back on. * Update CannedMessageModule.cpp	2024-10-07 15:16:10 -05:00
Mictronics	94ecbad904	Fix storage of admin key when installing default config. (#4995) ... * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR #420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-07 12:44:21 -05:00
Ben Meadors	53f189fff4	Remove has_rx * on installDefaultDeviceState (#4982)	2024-10-07 19:43:55 +08:00
Jonathan Bennett	93d874b013	set tz config from string if unset (#4979)	2024-10-07 05:09:19 -05:00
Tom Fifield	234a56446b	Add frequencies for Philippines (#4951) ... There are three different frequencies available for Meshtastic in the Philippines, each with pros and cons: 433 - 434.7 MHz <10 mW erp 868 - 869.4 MHz <25 mW erp 915 - 918 MHz <250 mW EIRP, no external antennna allowed Philippines may also use LORA_24 unrestricted at up to 10mW, or up to 250mW if there is no external antennna. Frequency rules in the Philippines are determined by aggregating the information in laws, following the circulars referenced in the [National Radio Frequency Allocation Table (NRFAT)](https://ntc.gov.ph/wp-content/uploads/2022/frequencyallocations/NRFAT_Rev_2020.pdf) and then circulars that amend the circulars referenced in the NRFAT. A full description of the regulatory basis can be found in the github issue: https://github.com/meshtastic/firmware/issues/4948#issuecomment-2394926135 For 433MHz and 868MHz we refer to the Low Power Equipment rules for "Non-specific Short Range Devices, Telemetry, Telecommand, Alarms, Data In General and Other Similar Applications.". For 915MHz and Wireless Data Network Services indoor device rules. A device approved by the NTC is required for any use of Meshtastic in the Philippines. fixes https://github.com/meshtastic/firmware/issues/4948 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-10-06 09:31:13 -05:00
github-actions[bot]	830281803f	[create-pull-request] automated change (#4974) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-06 08:14:03 -05:00
Tom Fifield	bb9f003c24	Switch EnvironmentTelemetry to use UnitConversions (#4972) ... We already have a central class for unit conversions, switch EnvironmentTelemetry to that in preparation for HealthTelemetry.	2024-10-06 07:55:21 -05:00
Tom Fifield	7febb41727	Trunk format Screen.cpp (#4970)	2024-10-06 07:37:20 -05:00
github-actions[bot]	ad031dd69f	[create-pull-request] automated change (#4971) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-06 07:28:05 -05:00
Tom Fifield	ebc3a66d10	Which Module wants a UI Frame? (#4967) ... Previously our debug message for screens blandly stated "Module wants a UI Frame" This patch replaces the word Module with the name of the Module in need of a frame a frame, enhancing debugging ability.	2024-10-06 06:40:23 -05:00
Tom Fifield	553e572eb5	Coalesce duplicated method GetTimeSinceMeshPacket (#4968) ... GetTimeSinceMeshPacket was duplicated in PowerTelemetry and EnvironmentalTelemetry, albeit one had a cooler name than the other. As we add HealthTelemetry, to avoid creating a third instance of this method, let's move it somewhere that makese sense. Adds a new method GetTimeSinceMeshPacket to MeshService and updates EnvironmentTelemetry and PowerTelemetry to use it.	2024-10-06 06:40:06 -05:00
medentem	0952d1b252	UserPrefs - Preconfigure up to 3 channels, GPS Mode (#4930) ... * added up to 3 channels via userprefs * added up to 3 channels via userprefs * added up to 3 channels via userprefs * trunk fmt * Added USERPREFS for GPS MODE	2024-10-06 15:32:07 +08:00
Tom Fifield	8a370c5381	Revert "Revert "Remove unused Jlink monitoring files (#4953)" (#4959)" (#4966) ... This reverts commit 783466f116.	2024-10-05 19:34:51 -05:00
Tom Fifield	0c90a2274f	Remove unused headers (#4954) ... These files had existing since 2020 without being used/modified.	2024-10-05 05:39:13 -05:00
Ben Meadors	783466f116	Revert "Remove unused Jlink monitoring files (#4953)" (#4959) ... This reverts commit 55049ed547.	2024-10-05 05:24:59 -05:00
Tom Fifield	55049ed547	Remove unused Jlink monitoring files (#4953) ... The NRF52 JLINK_MONITOR are unmodified copies of code from Nordic (https://github.com/NordicPlayground/j-link-monitoring-mode-debugging ), which are not used by our firmware and have not been touched in ~4 years.	2024-10-05 05:24:12 -05:00
Jonathan Bennett	7e946d15ca	Move ifndef to fix test (#4950)	2024-10-04 22:59:00 -05:00
Jonathan Bennett	4db0c75c8e	Don't use a static decleration in a header file (#4944) ... * Don't use a static decleration in a header file * Actually add the rest of the commit	2024-10-04 12:06:02 -05:00
Ludovic BOUÉ	e7cfadacd8	Add Panel_ILI9342 to TFTDisplay.cpp (#4822) ... * Add Panel_ILI9342 to TFTDisplay.cpp [Panel_ILI9342](https://github.com/lovyan03/LovyanGFX/blob/master/src/lgfx/v1/panel/Panel_ILI9342.hpp) * Add ILI9342_DRIVER to TFTDisplay.cpp * Add ILI9342_DRIVER to Screen.cpp * Add ILI9342_DRIVER to ScreenFonts.h * Add ILI9342_DRIVER to main.cpp * Add ILI9342_DRIVER to images.h * Add ILI9342_DRIVER to NodeDB.cpp * Add ILI9342 to PortduinoGlue.cpp * Add ili9342 to PortduinoGlue.h * Fix formatting * Update Screen.cpp to add ILI9342_DRIVER * Update TFTDisplay.cpp * Update TFTDisplay.cpp * Update Screen.cpp * Update Screen.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-10-04 07:47:14 -05:00
GUVWAF	673fe294f3	Add rxDupe, txRelay and txRelayCanceled to LocalStats (#4936) ... * Introduce `isFromUs()` and `isToUs()` * Add rxDupe, txRelay and txRelayCanceled to LocalStats	2024-10-04 06:28:51 -05:00
gitbisector	236374491b	cleanupNeighbors() time difference fix (#4941)	2024-10-04 06:17:23 -05:00
Jonathan Bennett	befc2ece6f	Add a Userprefs Timezone String, to be replaced in the web flasher (#4938) ... * Add a Userprefs Timezone String, to be replaced in the web flasher * Use a volatile char buffer for slipstreamed strings. * More refinement	2024-10-03 20:51:22 -05:00
github-actions[bot]	b2b60eccdb	[create-pull-request] automated change (#4937) ... Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>	2024-10-03 14:54:18 -05:00
github-actions[bot]	0a93261c06	[create-pull-request] automated change (#4926) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-10-02 06:14:55 -05:00
Ben Meadors	00f15459ec	Userprefs prefix macros for clarity and consistency (#4923) ... * Convert userprefs macros to prefixed ones for clarity * Fix key	2024-10-02 06:14:24 -05:00
todd-herbert	b8044c4983	Tweak dimensions for Canned Message Notifications (#4924)	2024-10-02 05:37:08 -05:00
Ben Meadors	18f12584ab	Consolidate and shrink down the re-used strings in logs (#4907) ... * Consolidate and shrink down the re-used strings in GPS * Condense all the things --------- Co-authored-by: GUVWAF <thijs@havinga.eu>	2024-10-01 15:38:36 -05:00
Thomas Göttgens	cae2e43dc6	revert .... revert ....	2024-10-01 16:36:44 +02:00
Thomas Göttgens	0d175a918c	misc library updates and compiler warnings, trunk upgrade	2024-10-01 16:02:10 +02:00
Ben Meadors	dc55d7dd98	Trunk it	2024-09-30 18:07:11 -05:00
TheMalkavien	553514e3b7	Fix #4911 : Partially rework some code to remove warnings about potential non-aligned memory accesses (#4912) ... * * Adding the -Wcast-align compilation flag for the rp2040. * * Some rework to use a struct to access radio data * Buffer will not be accessed by arithmetic pointer anymore * * Remplace arithmetic pointer to avoid Warning * * Avoid 2 little artitmetic pointer --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-30 17:56:29 -05:00
github-actions[bot]	1dace9a508	[create-pull-request] automated change (#4917) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-30 17:35:35 -05:00
Jonathan Bennett	dd587419c7	Regenerate public key on boot, to avoid accidental mismatch. (#4916) ... * Regenerate public key on boot, to avoid accidental mismatch. * Fix ifdefs	2024-09-30 17:06:31 -05:00
Ben Meadors	8ad89ba724	Allow for better target level Radiolib exclude plumbing (#4906) ... * WIP * LR11x0 * Anothern * =1	2024-09-30 05:14:22 -05:00
GUVWAF	3492c9aa99	Construct StoreForwardModule for Portduino as well (#4903) ... * Construct StoreForwardModule for Portduino as well * Remove duplicate variables	2024-09-29 16:17:23 -05:00
Michael Gjelsø	d73cbf14d5	Get accelerometerThread running from AdminModule. (#4886)	2024-09-29 11:49:16 -05:00
dahanc	d41d4c930e	When importing config, keep Bluetooth on and defer rebooting until co… (#4898) ... * When importing config, keep Bluetooth on and defer rebooting until config is committed * One more place that was prematurely disabling Bluetooth --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-29 07:30:10 -05:00
Ben Meadors	403e5c304e	Fix: Not being able to stop Ext. Notification nagging for screenless devices (#4899) ... * Move logic up to button thread for screen-less devices * Comment doesn't apply * Fiddy --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2024-09-29 07:29:53 -05:00
Ben Meadors	dcb2707d94	Return queue status on rate limit throttling (#4901)	2024-09-29 07:28:20 -05:00
Thomas Göttgens	7289f36600	Merge branch 'master' into t3s3-1121	2024-09-28 17:51:21 +02:00
Thomas Göttgens	06dab4fa13	Don't process RX when region unset	2024-09-28 16:27:38 +02:00
GUVWAF	12efedec42	Potential fix for bad Rx performance on T1000-E (#4885) ... * Potential fix for bad Rx performance on T1000-E * validate and refactor RF switching, eliminate godmode --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2024-09-28 09:24:13 -05:00
Thomas Göttgens	c650e7d273	finish TLora C6 Support, without bluetooth for now	2024-09-28 13:42:32 +02:00
Thomas Göttgens	f3213a5b2f	Merge branch 'master' into esp32-c6	2024-09-28 13:39:55 +02:00
caveman99	f28f5e07b7	[create-pull-request] automated change	2024-09-28 11:38:10 +00:00
Thomas Göttgens	62c306a14b	Merge branch 'master' into esp32-c6	2024-09-28 12:33:50 +02:00
Thomas Göttgens	016e1005df	Merge branch 'master' into t3s3-1121	2024-09-28 11:37:42 +02:00
Jonathan Bennett	6e1aa52723	More store-n-forward on native	2024-09-28 11:37:27 +02:00
Jonathan Bennett	5ff265c196	First stab at enabling store and forward for Native	2024-09-28 11:37:27 +02:00
Thomas Göttgens	1f08401070	Merge pull request #4892 from dahanc/master ... Only log "Setting DIO2 as RF switch" when doing so and fix battery level	2024-09-28 11:36:54 +02:00
Thomas Göttgens	a39280e9df	Merge pull request #4893 from meshtastic/softSleep ... Only check hardsleep threshold if GPS softsleep is supported	2024-09-28 11:35:57 +02:00
GUVWAF	48fa9f2242	Only check threshold if GPS softsleep is supported	2024-09-28 09:34:37 +02:00
David Huang	7f59cb54ef	Instead of having LipoBatteryLevel forward requests to AnalogBatteryLevel if there's no Lipo sensor, just have lipoInit return false. The forwarding didn't work because it never called analogInit.	2024-09-27 23:35:57 -05:00
David Huang	36a66df923	Don't log "Setting DIO2 as RF switch" unless we're actually going to do it. Also, if there's an error setting DIO2, log the error code.	2024-09-27 21:53:13 -05:00
Ben Meadors	8efc15f4d9	Ignore seen phoneapi packets (#4888) ... * Ignore PhoneAPI packet if it's been seen * ignoramus * Also keep track of the last 20 packet IDs * Fill * Make this match the nimble one * Add the log too * Ignore zero ID packets * Remove message entirely * TRunkt	2024-09-27 20:09:53 -05:00
Ken Piper	0e0811eccd	Implement GPIO pin allowlist (#4882)	2024-09-27 19:31:05 -05:00
Jonathan Bennett	fd1b68513a	Add sx126x_ant_sw for Native (#4887) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-27 19:29:44 -05:00
Thomas Göttgens	cb1cf055b1	Merge branch 'master' into esp32-c6	2024-09-27 22:51:29 +02:00
Thomas Göttgens	6c2e60d415	Merge branch 'master' into t3s3-1121	2024-09-27 22:22:42 +02:00
Jonathan Bennett	ef223b1195	use delete[] to avoid leaking memory (#4883)	2024-09-27 14:55:55 -05:00
Ben Meadors	30356dcd97	Retroactive trunkinate	2024-09-26 19:46:17 -05:00
Jonathan Bennett	5f6d9c3e27	Add pkc test (#4878) ... * Add a second delay() to get the unit tests running on Rak4631 * Add test_PKC_Decrypt * Remove cruft from test case	2024-09-26 19:33:08 -05:00
TheMalkavien	4794cdb120	Fix (some ?) memory alignment issues on the crypto part - resulting in crashes or strange behavior (#4867) ... * Replace multiple potentially non aligned pointer dereference (#4855) First step to fix some Crypto crashes or strange behaviors * Makes the two Crypto byte buffers aligned (#4855) Fix #4855, and probably multiple Crypto problems depending on hardware --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>	2024-09-26 17:44:11 -05:00
Thomas Göttgens	a32233bb92	fixa de typo too	2024-09-26 12:15:37 +02:00
Thomas Göttgens	fff2e435b5	Merge branch 'master' into t3s3-1121	2024-09-26 12:13:45 +02:00
Thomas Göttgens	8f84a96b69	refactor: typo fix in macro definition	2024-09-26 12:12:08 +02:00
Thomas Göttgens	11c17ec78c	oh well	2024-09-26 11:39:35 +02:00
Thomas Göttgens	b4bdf604f5	tryfix	2024-09-26 11:08:49 +02:00
Thomas Göttgens	833d7f65bc	fix toolchains between old and new ESP32	2024-09-26 10:18:45 +02:00
Ben Meadors	9bebad2dbe	Trunkt	2024-09-25 19:54:14 -05:00
Szetya	14019f2afa	Update WaypointModule.cpp (#4870) ... In INVERTED display mode, the compass ring was not visible.	2024-09-25 19:09:27 -05:00
Thomas Göttgens	12481b568a	fix a lot of nuisances reported by cppcheck (#4872) ... * fix a lot of nuisances reported by cppcheck * fix portduino	2024-09-25 19:09:06 -05:00
Thomas Göttgens	3072b2a444	Merge branch 'master' into esp32-c6	2024-09-26 00:20:00 +02:00
Thomas Göttgens	5c77e29d66	Merge branch 'master' into t3s3-1121	2024-09-26 00:17:41 +02:00
Thomas Göttgens	118809fbfc	Account for size of Envelope when allocating buffer. (#4819) ... * Account for size of Envelope when allocating buffer. INFO | 09:29:20 568 [mqtt] Subscribing to msh/2/e/LongFast/+ INFO | 09:29:20 568 [mqtt] Subscribing to msh/2/json/LongFast/+ INFO | 09:29:20 568 [mqtt] Subscribing to msh/2/e/PKI/+ DEBUG | 09:29:20 568 [mqtt] Publishing enqueued MQTT message ERROR | 09:29:20 568 [mqtt] Panic: can't encode protobuf reason='bytes size exceeded' assert failed: size_t pb_encode_to_bytes(uint8_t*, size_t, const pb_msgdesc_t*, const void*) mesh-pb-constants.cpp:18 (0) * save some mem	2024-09-25 17:13:04 -05:00
Ben Meadors	baf9cf5a59	Encapsulate RadioLibInterface receive IRQ logic (#4866) ... * Encapsulate RadioLibInterface receive IRQ logic * More concise * Trunk	2024-09-25 16:19:18 -05:00
Ben Meadors	3a2fa118a2	Merge branch 'master' into detsensor_broadcast_changes	2024-09-25 13:57:49 -05:00
Thomas Göttgens	d4e8452c60	Tbeams have no ADC (#4871)	2024-09-25 13:51:11 -05:00
Ben Meadors	4128d75ad4	IS_ONE_OF macro to make long chains of conditions more concise and easy to follow (#4860) ... * Is one of macro * Moar * Whoops * Trunk * isOneOf function backed macro	2024-09-25 13:50:00 -05:00
Augusto Zanellato	ed4527cfa5	address review comments	2024-09-25 20:02:22 +02:00
Thomas Göttgens	26112ba001	Support T3S3 LR1121 variant	2024-09-25 18:56:17 +02:00
Ben Meadors	a7c379961a	New detection sensor trigger type value	2024-09-25 07:01:15 -05:00
Ben Meadors	02d9d8b76c	Merge branch 'master' into detsensor_broadcast_changes	2024-09-25 06:30:09 -05:00
todd-herbert	d1138d51e5	Wrangle module frames with I2C keyboard (#4817) ... * Only suppress UI nav if module using keyboard input * CardKB combo to dismiss text message and waypoint Currently assigned to Fn + Delete	2024-09-25 06:27:04 -05:00
Ben Meadors	31e952c72e	Merge branch 'master' into detsensor_broadcast_changes	2024-09-25 06:26:14 -05:00
github-actions[bot]	9d7938f570	[create-pull-request] automated change (#4865) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-25 06:25:56 -05:00
David	9456c42fc0	Refactor AccelerometerThread.h (#4831) ... * Initial upload * Tidy up * Update ICM20948Sensor.cpp * Update AccelerometerThread.h * Initial upload * Tidy up * Update ICM20948Sensor.cpp * Update AccelerometerThread.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-25 06:25:31 -05:00
David	40b3dbaa70	Add MAX17048 lipo fuel gauge (#4851) ... * Initial commit * Update MAX17048Sensor.cpp * Update EnvironmentTelemetry.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-25 05:34:53 -05:00
dylanli	1293c5cdd4	Support for Seeed XIAO S3 Board (#4850) ... * feat: add seeed-xiao-s3 board defination and pins defination * chore: add SEEED XIAO S3 into mesh pb * fix: fix trunk fmt check failed * Trunk fmt variant.h * Restore automatically generated file --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-09-25 18:27:14 +08:00
caveman99	f73aa8aa82	[create-pull-request] automated change	2024-09-25 08:28:33 +00:00
Tom Fifield	e6e05dda1e	Merge branch 'master' into master	2024-09-25 15:10:48 +08:00
Thomas Göttgens	65104d5d8c	fix #4844 (#4859)	2024-09-24 16:51:07 -05:00
Augusto Zanellato	881f133021	Merge branch 'master' into detsensor_broadcast_changes	2024-09-24 23:00:35 +02:00
Tom Fifield	adb094ebc9	Remove old comments from main (#4849) ... These comments were circa 4 years old. Remove them.	2024-09-24 06:08:32 -05:00
Tom Fifield	b709d47832	Fix Ublox M10 Setup (#4842) ... There is no EXTINT pin available on the Tdeck, which uses the Ublox M10 GPS. Therefore our previous hack to use that pin makes the GPS not work. That workaround was implemented to fix sleep issues which have now since been fixed with the state machine. This patch restores the state prior to the hack, which is known-working. Additionaly, it was discovered that M10s hate it when you try and save to non-extistent eeprom/SPI flash. This patch creates a new SAVE command for the M10 that fixes this issue. Many thanks to @MisterC925 whose report and testing was essential for this fix. fixes https://github.com/meshtastic/firmware/issues/4625 Co-authored-by: Ken McGuire <kenm@paonia.com>	2024-09-24 05:50:03 -05:00
Augusto Zanellato	01d42d4728	Merge branch 'master' into detsensor_broadcast_changes	2024-09-24 11:53:41 +02:00
Augusto Zanellato	ce480ae626	fix comment style	2024-09-24 11:16:04 +02:00
Augusto Zanellato	139686d639	bump protobufs	2024-09-24 11:11:16 +02:00
Jonathan Bennett	c39d270f40	Build message in printBytes, to not spam BLE log (#4843)	2024-09-24 12:41:28 +08:00
Tom Fifield	428a567078	Wire 1 is PIN_WIRE1_SDA (#4840) ... Based on #4745, PIN_WIRE1_SDA is the 'second' wire interface. This pach amends the check to determine whether a device has two wire interfaces should use PIN_WIRE1_SDA, rather than PIN_WIRE_SDA.	2024-09-23 19:16:44 -05:00
Ben Meadors	0ad1f776ae	Manually regen protos for now	2024-09-23 18:53:01 -05:00
Ben Meadors	e78c706999	Fix RAK4631 accelerometer (#4837)	2024-09-23 18:40:54 -05:00
Ben Meadors	c442cd7267	Remove some straggler now	2024-09-23 15:53:42 -05:00
Ben Meadors	9cbabb0468	Teardown bluetooth phoneAPI better and fix client notification issue (#4834) ... * Teardown bluetooth phoneAPI better and fix client notification issue * Fix client notification draining	2024-09-23 15:51:05 -05:00
Jonathan Bennett	9a7a4d3814	Check for null before printing debug (#4835)	2024-09-23 13:56:26 -05:00
Jonathan Bennett	fa1cc59841	Rename message length headers and set payload max to 255 (#4827) ... * Rename message length headers and set payload max to 255 * Add MESHTASTIC_PKC_OVERHEAD * compare to MESHTASTIC_HEADER_LENGTH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2024-09-23 09:20:32 -05:00
Augusto Zanellato	d4dc4dec76	Merge branch 'master' into detsensor_broadcast_changes	2024-09-23 16:20:20 +02:00
Augusto Zanellato	be01c18c74	DetectionSensor: more flexible triggering	2024-09-23 16:15:44 +02:00
Ben Meadors	e8829b8f52	Refactor and consolidate time window logic (#4826) ... * Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2024-09-23 08:58:14 -05:00
Todd Herbert	1487ca2a30	Tidier macros	2024-09-24 00:25:43 +12:00
Todd Herbert	11598beb16	Implement optional second I2C bus for NRF52840 ... Enabled at compile-time if WIRE_INFERFACES_COUNT defined as 2	2024-09-24 00:25:43 +12:00
Tom Fifield	1f8aa1efc7	Minor fix (#4666) ... * Minor fixes It turns out setting a map value with the index notation causes an lookup that can be avoided with emplace. Apply this to one line in the StoreForward module. Fix also Cppcheck-determined highly minor performance increase by passing gpiochipname as a const reference :) The amount of cycles used on this laptop while learning about these callouts from cppcheck is unlikely to ever be more than the cycles saved by the fixes ;) * Update PortduinoGlue.cpp	2024-09-23 18:22:06 +08:00
Jonathan Bennett	18aac0ba25	Consider the LoRa header when checking packet length	2024-09-22 16:09:46 -05:00
Tom Fifield	2e24d244be	Make Ublox code more readable (#4727) ... * Simplify Ublox code Ublox comes in a myriad of versions and settings. Presently our configuration code does a lot of branching based on versions being or not being present. This patch adds version detection earlier in the piece and branches on the set gnssModel instead to create separate setup methods for Ublox 6, Ublox 7/8/9, and Ublox10. Additionally, adds a macro to make the code much shorter and more readable. * Make trunk happy * Make trunk happy --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-22 10:00:32 -05:00
Thomas Göttgens	906b0233d2	Merge pull request #4801 from meshtastic/heltec-wireless-bridge ... heltec-wireless-bridge	2024-09-21 16:15:28 +02:00
thebentern	f324ab7de7	[create-pull-request] automated change	2024-09-21 15:16:31 +02:00
todd-herbert	54f56438da	Re-order doDeepSleep (#4802) ... Make sure PMU sleep takes place before I2C ends	2024-09-21 07:59:17 -05:00
Thomas Göttgens	e6c7c80b3f	Raspberry Pico2 - needs protos	2024-09-21 14:50:19 +02:00
Thomas Göttgens	52cef05c70	heltec-wireless-bridge ... requires Proto PR first	2024-09-21 12:42:51 +02:00
Thomas Göttgens	8e5928276b	update pin definitions ... update toolchain enable telemetry fix compilation	2024-09-21 11:27:14 +02:00
Thomas Göttgens	f1cf2bf413	First stab at ESP32-C6 support for TLora-C6	2024-09-21 11:24:52 +02:00
todd-herbert	ba31a7c753	Honor flip & color for Heltec T114 and T190 (#4786) ... * Honor TFT_MESH color if defined for Heltec T114 or T190 * Temporary: point lib_deps at fork of Heltec's ST7789 library For demo only, until ST7789 is merged * Update lib_deps; tidy preprocessor logic	2024-09-20 13:27:41 -05:00
Ben Meadors	85d722232e	Additional decoded packet ignores	2024-09-20 07:35:26 -05:00
Ben Meadors	921d92c649	Drop received packets from self	2024-09-20 06:55:16 -05:00
Jonathan Bennett	82f1be33aa	Merge branch 'master' into master	2024-09-19 19:43:05 -05:00
Ben Meadors	91b4199f9d	Revert "DetectionSensor: broadcast all state changes" (#4776)	2024-09-19 10:46:18 -05:00
Augusto Zanellato	2ebfcea94e	DetectionSensor: broadcast all state changes ... Closes #4753	2024-09-18 19:43:23 +02:00
github-actions[bot]	deada41cee	[create-pull-request] automated change (#4765) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-18 10:49:12 -05:00
Ben Meadors	777bcf691a	Initial PhoneAPI rate-limiting of messages on certain ports (#4756)	2024-09-18 10:13:07 -05:00
Tom Fifield	35e1c401e2	PMSA0031 sensors require ~3secs before coming up on I2C (#4743) ... * PMSA0031 sensors require ~3secs before coming up on I2C As reported by @MALAONE1 and debugged by @shodan8192 , PMSA0031s on a RAK4631 take 3 seconds before they can become detectable on I2c. Add a delay(4000) before I2C scan if the air quality sensor pin is defined. Fixes https://github.com/meshtastic/firmware/issues/3690 * Remove 4 second wait and rescan during air quality init for the sensor * works without but this triggers my OCD --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-18 10:12:49 -05:00
GUVWAF	db4a793aa9	Merge branch 'master' into master	2024-09-18 11:38:40 +02:00
Jonathan Bennett	2d52803dbd	Add new admin error types (#4750) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-17 21:09:24 -05:00
Jonathan Bennett	c78302a2ee	Add hasPKC to deviceMetadata (#4755)	2024-09-17 19:34:05 -05:00
github-actions[bot]	923458bc18	[create-pull-request] automated change (#4754) ... Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2024-09-17 17:55:16 -05:00
Ben Meadors	50fb4ab22a	Implement optional hops_away on NodeInfo/Lite (#4747) ... * Implement optional hops_away on NodeInfo/Lite * Trunk	2024-09-17 12:08:04 -05:00
Thomas Göttgens	f5016763fd	change evaluation order to silence warning about "found" (#4749)	2024-09-17 10:33:21 -05:00
Ben Meadors	2a6921292e	Implement CoT detail support in TAKPacket (#4748) ... * Implement CoT detail support in TAKPacket * dest, src * More coffee is needed * SAVE	2024-09-17 10:05:55 -05:00
github-actions[bot]	a47570d65a	[create-pull-request] automated change (#4746) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-17 06:52:42 -05:00
Andre K	db4dc88d6f	feat: enable remote admin to set/clear fixed positions (#4713) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-17 06:50:49 -05:00
Tom Fifield	be306cc384	Increase GPS FIFO Buffer Size for RP2040 (#4741) ... As discovered and tested by @Mictronics, default Serial FIFO size on the Pico is 32bytes, which is not enough for GPS messages. This patch increases the Serial GPS FIFO buffer size to 256 for the RP2040 Architecture fixes https://github.com/meshtastic/firmware/issues/3989	2024-09-17 06:48:56 -05:00
Jonathan Bennett	a967dd52f3	More useful PKC logging (#4742)	2024-09-17 06:31:39 -05:00
Ben Meadors	11378325e0	Separate GPS and NTP RTCQuality logic and allow GPS time to always set us (#4721)	2024-09-17 06:29:18 -05:00
Thomas Göttgens	4b5bcf52d2	Merge pull request #4691 from S5NC/rak11200-pin-name-correction ... Rak11200 pin name correction	2024-09-17 11:42:40 +02:00
Thomas Göttgens	5ba418b2cd	Merge pull request #4744 from meshtastic/create-pull-request/patch ... Changes by create-pull-request action	2024-09-17 09:27:42 +02:00
Thomas Göttgens	bc753e6903	trunk fmt	2024-09-17 15:24:11 +08:00
S5NC	34a543ec74	Update main.cpp	2024-09-17 15:24:11 +08:00
S5NC	06cd9abd81	Update SX126xInterface.cpp	2024-09-17 15:24:11 +08:00
S5NC	af30485611	Update main.cpp	2024-09-17 15:24:11 +08:00
S5NC	cd6bd1e9a3	Update main.cpp	2024-09-17 15:24:11 +08:00
Tom Fifield	6f1db6fc63	Fix I2C address for QMC5883L. ... QMC5883L and HMC5883L are 3-axis compasses which are often confused. As reported by @Africmod, we had the wrong I2C address for the QMC5883L. This patch fixes the address and adds its HMC5883L so we keep info about both. Fixes https://github.com/meshtastic/firmware/issues/4144	2024-09-17 13:48:10 +08:00
jp-bennett	39c90dd581	[create-pull-request] automated change	2024-09-17 02:53:44 +00:00
Todd Herbert	33e6f7f6e0	Hollow triangle for E-Ink; trunk formatting	2024-09-17 08:27:00 +08:00
Szetya	97fd189f43	Compass update ... https://github.com/meshtastic/firmware/issues/4494 New compass arrow and replacement of the north marker with a small circle.	2024-09-17 08:27:00 +08:00
Thomas Göttgens	b3343303a9	write firmware version and hardware platform to Flash memory	2024-09-16 21:36:54 +02:00
github-actions[bot]	f37276d5fc	[create-pull-request] automated change (#4736) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-16 10:32:21 -05:00
Tom Fifield	41a769aa06	Fix Heltec T114 vendor definition ... @dahanc pointed out there was an extra one in there.	2024-09-16 13:55:27 +08:00
Ben Meadors	8d57b6164a	Add Heltec T1114 hardware model to build (#4719)	2024-09-15 20:37:19 -05:00
Ben Meadors	dc3eba9100	Expand to MqttClientProxyMessage_size (#4726)	2024-09-15 18:57:02 -05:00
Jonathan Bennett	ff8baa1c85	Don't use PKC on a non-primary channel unless specifically requested (#4715) ... * Don't use PKC on a non-primary channel unless specifically requested * Don't change from channel 0 if we can send a PKC packet.	2024-09-15 09:26:43 -05:00
Jonathan Bennett	3a10a27851	Actually restrict remote hardware to gpio channel (#4717)	2024-09-15 06:27:59 -05:00
GUVWAF	8893529653	Make local stats number of Rx packets sum of good and bad (#4709)	2024-09-14 17:53:27 -05:00
Jonathan Bennett	1ab5bf4355	Use the time.age() value to correct stale GPS times (#4705) ... * Use the time.age() value to correct stale GPS times * Trunk --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-14 07:44:40 -05:00
Ben Meadors	ae791ca7e1	Add buildstamp epoch to initial debug output	2024-09-13 19:43:50 -05:00
Ben Meadors	35cfe4318a	Stop past timestamps from setting our system time RTC (#4704) ... * Ignore attempts to set times in the past (before our build epoch) * TRONK	2024-09-13 19:42:31 -05:00
GUVWAF	b39aca8d11	Merge branch 'master' into master	2024-09-13 08:49:04 +02:00
GUVWAF	9f3a1c1214	Trunk fmt	2024-09-12 19:12:57 +02:00
Manuel	625254cf90	Support Seeed SenseCAP Indicator (#4279) ... * preliminary target environment * add debug tool * add screen definitions * screen definitions * remove rtc, debug build * correct rotation * Add real hwmodel * fix width * use IO expander ports * link to modified arduino-esp32 * added config_detail * rotate screen * remove touch INT * add delay to display log * color log and radiolib log * LoRa init * make trunk happy * add lovyanGFX patch lib for io expander * fix lib * fix display&touch function * touch driver I2C scan * remove delay * build for release * minor code cleanup * allow trunk to be happy --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2024-09-12 06:44:30 -05:00
beegee-tokyo	c4c85777d0	Another try to get the code format correct.	2024-09-12 13:20:09 +08:00
beegee-tokyo	ca8d2204ba	Fix formatting	2024-09-12 11:06:13 +08:00
beegee-tokyo	35cdc81d45	Disable SCREEN and enable TZ	2024-09-12 09:53:13 +08:00
panaceya	910b6b7512	OLED_ can be configured via userPrefs.h (#4624)	2024-09-11 19:31:30 -05:00
Tom Fifield	371c3e05bf	Beautify GPS_DEBUG getACK logging code (#4672) ... This getACK is used to look for ASCII responses, so print ASCII when GPS_DEBUG is enabled. This markedly assisted with recent AG3335 debugging. It works great with other chips too (tested eg ATGM336H). Even UBLOX prints understandable "GPTXT,01,01,01,PDTI inv format*35." responses. Credit to bluebrolly. on discord.	2024-09-11 19:30:29 -05:00
Michael Gjelsø	f37df4d6bf	Radiomaster Bandit Accelerometer support (#4667) ... * Added STK8xxxx Accelerometer chip Added detection of STK8BA53 to I2C scanner. Change the way and order MCP9808, lLISH3DH and STK8BA53 is detected since they all shares the same I2C address. * Accelerometer support Radiomaster Bandit. Enables tap to wake screen if enabled in config, * Trunk Trunk	2024-09-11 18:53:17 -05:00
Ben Meadors	9ac0e26d42	Add option to preserve private key for factory reset (config) (#4679) ... * Add option to preserve private key for factory reset (config) * Typo fix * Copy the key in the right direction, and set the size. * Don't set the key size back to 0 right after setting it to 32. * Set the key size before using it to do a memcpy. * Use the right key_size for backing up private_key * Don't factoryReset() for a missing nodeDB * Disable Bluetooth in AdminModule when resetting device settings or nodeDB to avoid race * Add checks for valid objects before deinit bluetooth * Add disableBluetooth to handleSetConfig, handleSetModuleConfig, and commit settings --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2024-09-11 08:42:26 -05:00
zerolint	6724f1f7ea	Print Unix epoch on time_t 64bit platforms (#4673) ... Fixes (#4600) by using unsigned 32bit for epoch. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-10 15:51:28 -05:00
Ben Meadors	013021941e	Remove scaling of smart position broadcast minimum interval specifically (#4677) ... * Remove scaling of smart position broacast minimum interval specifically * Trunk	2024-09-10 15:30:40 -05:00
Jonathan Bennett	4e850296b6	Fix repeatedly getting new NodeNum and add more debug (#4674) ... * All the debug * Change `memccpy()` to `memcpy()` * Brint all the bytes of the MAC Address from the NodeDB * Check for blank MAC Address in ourown NodeDB entry * One more `memccpy()` * Clean-up debug log --------- Co-authored-by: GUVWAF <thijs@havinga.eu>	2024-09-10 13:24:57 -05:00
beegee-tokyo	0c42f79038	Merge branch 'master' of https://github.com/beegee-tokyo/firmware	2024-09-10 18:43:53 +08:00
beegee-tokyo	4fc3782ea3	Fix traceroute, neighborinfo and waypoint	2024-09-10 18:43:47 +08:00
Ben Meadors	9ac4a0114f	Merge branch 'master' into master	2024-09-10 05:25:39 -05:00
beegee-tokyo	9188786581	Fix #ifndef and rename the variant	2024-09-10 11:58:25 +08:00
GUVWAF	5537f98dd6	Merge branch 'master' into trFix	2024-09-09 21:29:37 +02:00
GUVWAF	4ed12bf21d	Try fix repeatedly getting a new NodeNum (#4670)	2024-09-09 14:22:32 -05:00
GUVWAF	2f9dcee954	Fix size calculation of route/SNR array	2024-09-09 19:13:00 +02:00
Thomas Göttgens	68d6ff8c24	Merge pull request #4650 from fifieldt/AG3352 ... Add support for AG3352 and fix AG3335 support	2024-09-09 16:40:44 +02:00
Tom Fifield	dc8cc122a6	Add explicit to JSONValue constructors (#4665)	2024-09-09 09:20:21 -05:00
Tom Fifield	e9d55de3cb	Fix out-of-bound array access in T1000X Sensor (#4663) ... if u8i == 135, then u8i++ runs, the loop exits since u8i == 136, then value for u8i is 136 after the for loop. then in the next line, ntc_res2[u8i] will read past the end of the array	2024-09-09 07:54:11 -05:00
David	dacb452d47	Bugfix (#4660)	2024-09-09 07:16:58 -05:00
Thomas Göttgens	e985ee878f	Merge pull request #4658 from fifieldt/zombiegps ... If GPS sleepTime is Zero, don't sleep.	2024-09-09 12:12:53 +02:00
Thomas Göttgens	b2e2f1dba3	Merge branch 'master' into AG3352	2024-09-09 11:10:36 +02:00
beegee-tokyo	a5b79528b3	Add RAK4631 Ethernet Gateway with working JSON output to MQTT	2024-09-09 11:56:37 +08:00
Tom Fifield	ebe1b40bee	If GPS sleepTime is Zero, don't sleep. ... At the moment if the result of sleepTime calculations comes out to zero, we put the GPS into HARDSLEEP (losing all its status) and then immediately make it ACTIVE again. This patch avoids that toga. fixes https://github.com/meshtastic/firmware/issues/4657	2024-09-09 09:28:04 +08:00
Tom Fifield	6217e97c41	Add support for AG3352 and fix AG3335 support ... AG33352 is a Mediatek/Airoha GPS/GLONASS/Galileo/BeiDou receiver. Patch adds relevant detection and setup code. Thanks to Bluebrolly and kongduino for providing the relevant information and testing. This patch also fixes support for the A3335, which is a related chip. The setup and detection code now works as tested on a real life T-1000E! Thanks to @gpsfan for the guidance.	2024-09-09 09:06:05 +08:00
Tom Fifield	e470619e3d	Remove undefined declaration (#4652) ... The getNMEA method was introduced to the header but never defined in code. As it's unused, remove it.	2024-09-08 12:33:56 -05:00
Jonathan Bennett	bf34329033	Adds the data bitfield and ok_to_mqtt bit (#4643) ... * Don't filter PKI packets just for being encrypted. * Add ok_to_mqtt config and bit * Bitfield * Adjust dontmqttmebro logic. * Manipulate bitfield only in router.cpp * Want_ack is not want_response * Bitfield macros * Use new Bitfield macro in MQTT.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-07 18:21:59 -05:00
Thomas Göttgens	8e88b9e819	Merge pull request #4646 from gitbisector/batt_stat ... Report PWD when no battery present.	2024-09-07 10:58:17 +02:00
Tom Fifield	ba28ffb65a	Simplify GNSS Probe code ... This patch takes inspiration from our I2CDetect code where we have many sensors that can be detected rather simply. It creates a new macro, PROBE_SIMPLE(Chip name, Command to run, response, Driver, timeout) and converts existing simple cases to use this macro.	2024-09-07 11:59:45 +08:00
gitbisector	9651b5a0ec	Merge branch 'master' into batt_stat	2024-09-06 17:23:38 -07:00
git bisector	2f2ddae12a	Report PWD when no battery present.	2024-09-06 17:19:53 -07:00
github-actions[bot]	c77b89d85c	[create-pull-request] automated change (#4645)	2024-09-06 18:51:22 -05:00
caveman99	b8cee51e84	[create-pull-request] automated change	2024-09-06 20:27:28 +00:00
Thomas Göttgens	35b47467c7	Merge pull request #4639 from zerolint/master ... RAK13800 Ethernet improvements	2024-09-06 15:11:10 +02:00
Thomas Göttgens	8f35a42f4f	tryfix #4384 (#4642) ... * tryfix #4384 - don't assume we want that functionality if the Accelerometer was found. This is only for T-Watch * Add config.display.wake_on_tap_or_motion default to RAK --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-06 06:55:56 -05:00
Ben Meadors	ee68e727ed	Merge branch 'master' into master	2024-09-06 06:25:07 -05:00
Robert Fisk	962d9ff220	Move defines to input broker	2024-09-06 11:54:31 +02:00
Robert Fisk	8e0a342f06	Gather canned message magic numbers into header defines.	2024-09-06 11:54:31 +02:00
Thomas Göttgens	55292f8a84	Merge pull request #4638 from fifieldt/CRLF ... Add missing linefeeds to gps code	2024-09-06 11:46:57 +02:00
zerolint	d72a836e07	RAK13800 Ethernet improvements ... Fixes (#3618) by allowing more time for slower requests. Resolve Syslog not maintaining client causing issues on RAK13800. Resolve Ethernet static IP setting subnet as gateway IP. Reduce comment and log message ambiguity around API. Remove duplicate #if !MESHTASTIC_EXCLUDE_WEBSERVER block.	2024-09-06 11:45:43 +02:00
Thomas Göttgens	26a3841a93	Merge pull request #4637 from todd-herbert/gps-icon ... Update E-Ink GPS icon immediately when triple-pressing user button	2024-09-06 11:25:12 +02:00
Thomas Göttgens	011e640e95	Add LR11x0 firmware version to init.	2024-09-06 09:47:43 +02:00
Tom Fifield	e4e1ea971f	Add missing linefeeds to gps code ... As reported by @caveman99, the required CRLFs were missing from the AG3335 setup code.	2024-09-06 08:45:57 +08:00
Todd Herbert	bcdc36c07c	Refresh E-Ink to show changes in GPS icon	2024-09-06 11:25:41 +12:00
Thomas Göttgens	7c6454f171	bring 2.4G back in line with preset bandwidth (#4634)	2024-09-05 15:49:08 -05:00
Tom Fifield	9e55e6befb	Minor GPS fixes (#4630) ... 1. Remove unused line in GPS::probe 2. update new PositionModule::hasQualityTimeSource to handle MESHTASTIC_EXCLUDE_GPS	2024-09-05 06:16:06 -05:00
gitbisector	bb9ddcf2b5	Same priority packets processed in enqueue order (#4608) ... * Same priority packets processed in enqueue order * Prefer same prio pkts on mesh over new ones. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-09-04 08:31:30 -05:00
Thomas Göttgens	ff40a3f120	fix RF switch for Tracker E (#4621) ... * fix RF switch for Tracker E * fix all flags for Radiolib * hopefully fix LR1110 * update to latest radiolib master - thanks @GUVWAF	2024-09-03 14:21:40 -05:00
Thomas Göttgens	6fc4a1754b	Radiolib API Changes	2024-09-03 13:12:39 +02:00
Thomas Göttgens	f9e513f4fd	Merge branch 'Tracker-1000E' of github.com:meshtastic/firmware into Tracker-1000E ... # Conflicts: # src/mesh/LR11x0Interface.cpp	2024-09-03 09:59:44 +02:00
Thomas Göttgens	7dad2286e2	trunk fmt	2024-09-03 09:58:27 +02:00
Thomas Göttgens	8598645931	- use setRfSwitchTable ... - ditch Godmode - fixes Signedness Error in Loop. - add V3 factory erase for 7.3.0 softdevice	2024-09-03 09:26:41 +02:00
Tom Fifield	cdea602181	Remove unused define (#4620) ... Neither RF95_DIO2 nor LORA_DIO2 are found anywhere in the code.	2024-09-02 20:08:02 -05:00
Ben Meadors	b526a3ad53	Own node should be favorited and have zero hops away (#4618)	2024-09-02 17:51:02 -05:00
Thomas Göttgens	2f0c19ebea	- use setRfSwitchTable ... - ditch Godmode - fixes Signedness Error in Loop. - add V3 factory erase for 7.3.0 softdevice	2024-09-02 15:06:06 +02:00
Thomas Göttgens	367d787d74	Merge branch 'master' into pr-fix4154	2024-09-02 10:24:31 +02:00
Thomas Göttgens	c8bf43de93	Merge pull request #4482 from dhskinner/BMP388 ... Add BMP388 as a new pressure and temp sensor	2024-09-02 10:23:57 +02:00
Thomas Göttgens	e543b61dd8	trunk fmt	2024-09-02 10:23:31 +02:00
Thomas Göttgens	719faf4f97	trunk fmt	2024-09-02 10:16:32 +02:00
Thomas Göttgens	3bf20dc3a6	Merge branch 'master' into pr-fix4154	2024-09-02 09:16:52 +02:00
David	d93425fde1	Merge branch 'master' into BMP388	2024-09-02 16:48:38 +10:00
Riley Nielsen	234e652a07	Fix switch	2024-09-01 20:43:56 -07:00
Riley Nielsen	cd16b7b00a	fix display of degree symbol (+ other symbols)	2024-09-01 18:26:08 -07:00
GUVWAF	56223710b5	More priorities for different types of MeshPackets (#4606)	2024-09-01 10:29:53 -05:00
github-actions[bot]	e45a358de0	[create-pull-request] automated change (#4594) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-09-01 09:20:10 -05:00
Jonathan Bennett	b71e12c5e5	Phone admin work (#4599) ... * Don't throw an error on the sessionkey admin tag * Throw an error on packet sent to 0	2024-08-31 15:04:35 -05:00
David	eb1f80f520	Fix build issue with mutex	2024-08-31 19:40:54 +10:00
David	6c0911038a	Merge branch 'master' into BMP388	2024-08-31 18:18:26 +10:00
David	644e213b13	Added a singleton wrapper for bmp3xx	2024-08-31 18:15:33 +10:00
Ben Meadors	33eb073535	Ignore (from)Net time on positions with an unknown or fixed location source (#4593) ... * Ignore (from)Net time on positions with an unknown or fixed location source * Dunk a trunk	2024-08-30 19:02:48 -05:00
Ben Meadors	8729cdb699	Merge branch 'master' into pr-fix4154	2024-08-30 16:31:47 -05:00
GUVWAF	eb071ec80d	Set high priority for text messages (#4592)	2024-08-30 14:54:44 -05:00
github-actions[bot]	8144dcbc25	[create-pull-request] automated change (#4591) ... Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>	2024-08-30 13:46:51 -05:00
Jonathan Bennett	2b0113ae82	Consider an admin timestamp to be higher quality than from net (#4589)	2024-08-30 06:02:48 -05:00
Manuel	6a24566efb	Lilygo T3S3 E-Paper support (#4569) ... * t3s3 e-paper support * remove GPS autodetect (which leads to crashes during startup when no GPS present) * update EINK defines * keep definitions for external GPS connector but disable GPS auto scan by default	2024-08-30 05:53:06 -05:00
Jonathan Bennett	5bc17a9911	Key regen and MQTT fix (#4585) ... * Add public key regen * Properly label and handle PKI MQTT packets * Extra debug message to indicate PKI_UNKNOWN_PUBKEY * Ternary! * Don't call non-existant function on stm32 * Actually fix STM32 compilation	2024-08-29 16:28:03 -05:00
David	a1d0af6636	Merge branch 'master' into BMP388	2024-08-30 07:25:27 +10:00
Mark Trevor Birss	22454c95c7	[BOARD] Add Minewsemi MS24SF1 nRF52840 SX1262 Module (SoftDevice 7.3.0) (#4584) ... * Update architecture.h * Add files via upload * Add files via upload * Update variant.h * Update variant.h * Update variant.cpp * Update variant.cpp * Update variant.cpp	2024-08-29 16:17:44 -05:00
Thomas Göttgens	50631f96fc	trunk fmt	2024-08-29 21:51:06 +02:00
And137	a6cc7041d3	Merge branch 'master' into polish-oled	2024-08-29 20:04:03 +02:00
Ben Meadors	171512d2f6	Fixed buzzer	2024-08-29 11:42:27 -05:00
David	47e1580a62	Integration test	2024-08-29 16:40:17 +02:00
David	fc1e60ac58	Initial upload	2024-08-29 16:40:17 +02:00
And137	f1f66cf54a	Merge branch 'master' into polish-oled	2024-08-29 12:54:06 +02:00
Jonathan Bennett	92eae39a1b	Move Time set from system to main (#4583)	2024-08-29 05:39:30 -05:00
Kevin Hester	dc9f6e1360	fix CI warnings (and change CI comment to be correct)	2024-08-28 11:25:54 -07:00
Ben Meadors	f5633bf0c5	Fix T1000-E default to turn on buzzer for Ext. Notification (#4575)	2024-08-28 11:25:54 -07:00
Ben Meadors	3ad0af5ce8	Fix super tiny T1114 tft font size and fork repo to fix compiler warnings (#4573)	2024-08-28 11:25:54 -07:00
Thomas Göttgens	94c3bb4a56	fix #4390 (#4571)	2024-08-28 11:25:54 -07:00
Power Li	cc93df27a5	set current time to system time in portduino build (#4556) ... * set current time to system time in portduino build * fix includes order --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2024-08-28 11:25:54 -07:00
Jonathan Bennett	e3ce3a3a4f	Don't compare nodeDB macaddr to owner.macaddr, because in rare cases that may be unset. (#4562) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2024-08-28 11:25:54 -07:00
Jonathan Bennett	3c4d964334	Mask out random bits when doing queue ordering (#4561) ... * Mask out random bits when doing queue ordering * Parenthesis	2024-08-28 11:25:54 -07:00
Jonathan Bennett	574124aee5	Deal with admin_key being repeated (#4558)	2024-08-28 11:25:54 -07:00
John Milton	1fe80e0f30	Add support for Adafruit Feather RP2040 with RFM95. (#4451) ... * Add support for Adafruit Feather RP2040 with RFM95. * Update mesh.pb.h dropping this change from the file generated by the protobuf * Update mesh.pb.h remove these reverting changes * Update mesh.pb.h oops, missed a comma	2024-08-28 11:25:54 -07:00
Ben Meadors	927a35ef51	Protos	2024-08-28 11:25:54 -07:00
Ben Meadors	c11a66030f	Userlite mem comparison (#4552)	2024-08-28 11:25:54 -07:00
github-actions[bot]	059d5582d1	[create-pull-request] automated change (#4544) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2024-08-28 11:25:54 -07:00
geeksville	9631a1be38	remove deprecated serial/bt logging options and unify in the new (#4516) ... security option. Per discussion in https://github.com/meshtastic/firmware/issues/4375 no need to preserve the old options when changing to this new simpler single boolean because they were newish, rarely used and only for 'advanced' developers.	2024-08-28 11:25:54 -07:00
Kevin Hester	8a9cc727a8	for #4154 use a binary gpio transformer to manage vext on heltec-tracker (saves power)	2024-08-28 11:25:54 -07:00
Kevin Hester	cdafa87cef	add lateInitVariant() as a concept. see below for docs ... (from src/extra_variants/README.md) This directory tree is designed to solve two problems. - The ESP32 arduino/platformio project doesn't support the nice "if initVariant() is found, call that after init" behavior of the nrf52 builds (they use initVariant() internally). - Over the years a lot of 'board specific' init code has been added to init() in main.cpp. It would be great to have a general/clean mechanism to allow developers to specify board specific/unique code in a clean fashion without mucking in main. So we are borrowing the initVariant() ideas here (by using weak gcc references). You can now define lateInitVariant() if your board needs it. If you'd like a board specific variant to be run, add the variant.cpp file to an appropriately named subdirectory and check for \_VARIANT_boardname in the cpp file (so that your code is only built for your board). You'll need to define \_VARIANT_boardname in your corresponding variant.h file. See existing boards for examples. This approach has no added runtime cost.	2024-08-28 11:25:54 -07:00