* Don't save Neighbors to flash when receiving
* Move `shouldSave` to `saveProtoForModule()`
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* remove redundant logic
* Handle special screens for old EInkDisplayClass
* Handle special screens for EInkDynamicDisplay class
* Join an async refresh in progress to avoid skipping screensaver
* attempt trunk fix
* fix Wireless Paper double-clear screen at boot
* log when flooded with "responsive" frames
* show the "resuming" screen when waking from deep-sleep
* rename drawDeepSleepScreen
avoid future confusion with "Screen Paused" screen
* show a screensaver frame when screen off
The frame shown during deep sleep is now also passed through showScreensaverFrames()
* Add macros for E-Ink color values.
OLEDDISPLAY_COLOR is inverted. Result of light-mode on E-Ink vs dark-mode on OLED?
* adapt drawDeepSleepScreen to new screensaver convention
* Mark Wireless Paper V1.1 as having problems with ghosting
Any other issues can be marked in a similar way, then handled in code where relevant
* Change screensaver from fullscreen logo to overlay
* identify "quirks" rather than "problems"
* move async refresh polling from display() to a NotifiedWorkerThread
* Prevent skipping of deep-sleep screen
(Hopefully)
* Redesign screensaver overlay
Now displays short name
* Optimize refresh for different displays
* Support older EInkDisplay class
* Don't assume text alignment
* fix spelling of a quirk macro
(No impact to code, but avoids future issues)
* Handle impossibly unlikely millis() overflow error
Should have just let it go, but here we are..
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Use `alterReceivedProtobuf()` for NeighborInfo and Traceroute
`alterReceived()` should never return NULL
Traceroute should be promiscuous
* Remove extensive logging from NeighborInfo module
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Adds configuration option to not build/include the webserver.
* Adds configuration option to not build/include the webserver.
* Keep initApiServer when excluding webserver
* fixes for failed formatting check
* Once more with feeling! Fix for regression.
* Fix includes for ARCH_ESP32
* Format changes from trunk
* Merge updates from origin
* Revert "Format changes from trunk"
This reverts commit 436e631774.
* jeez!
* tryfix proto conflict
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* (3/3) Add variant for pico with waveshare and GPS hat, utilizing slow clock.
* Not everybody has Serial2
* Trunk
* Push it real gud
* No init
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* More comprehensive MQTT thread and queue guards
* Consolidate logic
* Remove channel check
* Check for map_reporting_enabled as well
* Update message
* Remove channel check from here as well
* One liner
* Start the mqtt thread back up when channels change and we want mqtt
* Set `hop_start` in header to determine how many hops each packet traveled
* Set hopLimit of response according to hops used by request
* Identify neighbors based on `hopStart` and `hopLimit`
* NeighborInfo: get all packets and assume a default broadcast interval
* Add fail-safe in case node in between is running modified firmware
* Add `viaMQTT` and `hopsAway` to NodeInfo
* Replace `HOP_RELIABLE` with hopStart for repeated packet
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Added WebServer/WebServices for Native Linux Meshtastic and web gui
* Fix bug in login functionality
* Added customized config of portdunio.ini with LovyannGFX from marelab repro
* Compile Problem resolved with developer version of LovyanGFX.git
* Compile against dev version
* Fixes to fit into main branch
* Update variant.h, main.cpp, .gitignore, WebServer.cpp, esp32s2.ini, WebServer.h, ContentHandler.cpp, rp2040.ini, nrf52.ini, ContentHelper.cpp, Dockerfile, ContentHandler.h, esp32.ini, stm32wl5e.ini
* Added linux pi std /usr/include dir
* Adding /usr/innclude for Linux compile against native libs that are not hadled by platformio
* Review log level changes & translation
* Update Dockerfile
* Fix Typo & VFS ref. Part1
* Fix Typo & VFS ref.
* Dev Version for ulfius web lib
* Update platformio.ini
* Free VFS path string
* Remove unintended changes
* More unintentional changes
* Make the HTTP server optional on native
* Tune-up for Native web defaults
* Don't modify build system yet
* Remove more unneeded changes
---------
Co-authored-by: marc hammermann <marchammermann@googlemail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
* GPS rework, changes for M8 and stub for M10
* Add VALSET commands for u-blox M10 receivers
* Add VALSET commands for u-blox M10 receivers
tweak M8 commands
add comments for VALSET configuration commands
* Add commands to init M10 receivers,
tweak the M8 init sequence, this is a WIP as there are still some issues during init.
Add M10 version of PMREQ.
* Add wakeup source of uartrx to PMREQ_10
The M10 does not respond to commands when asleep,
may need to do this for the M8 as well
* Enable NMEA messages on USB port.
Normally, it is a good idea to disable messages on unused ports.
Native Linux needs to be able to use GNSS modules connected via
via either serial or USB.
In the future I2C connections may be required, but are not enabled for now.
* Save the config for all u-blox receiver types.
The M10 supports this command in addition to saving using
the VALSET commands for the RAM & BBR layers.
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor EInkDisplay
A lot of variant specific code is merged, with the macros pushed to the respective variant.h files.
"Dynamic Partial" code has been purged, pending a rewrite.
* fix: declare class only if USE_EINK, init all members
* refactor: move macros to platformio.ini
Responds to https://github.com/meshtastic/firmware/pull/3299#issuecomment-1966425926
* fix: EInkDisplay::connect() references old macros
Usage was in a block of variant-specific code, which had been intentionally left untouched.
* fix: remove duplicate macros from variant.h
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add UI frame to display PaxCounter module data
* only acquire screen when paxcounter is active, i.e. enabled and wifi and ble are both off
* sync font #define with other occurrences in code
* protect screen specific code with #if HAS_SCREEN
* limit upload_speed to 115200 for TLORA_V2_1_16
* fix failing trunk checks; sorry
* Revert "limit upload_speed to 115200 for TLORA_V2_1_16"
This reverts commit 4eb549c5e8.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Experimenting with deep sleep routers / repeaters
* Make decision to SDS or LS based on Router/Repeater role
* Don't sleep LoRA on router / repeater deep sleep
* Guards
* Platform guards
* Rename method
Such that direct message to MQTT node gets published and we get rid of always rebroadcasting when MQTT is enabled
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix Heltec Tracker Screen issues
Fix Heltec Tracker Screen issues like wrong offsets, display size and screen not shutting down.
Divides board into two different envs for 1.0 and 1.1 version PCB
* Helteck wireless tracker default version V1_1
* rename heltec tracker 1.1 - trunk fmt
rename varian of heltec tracker 1.1 to "heltec tracker" to be retro-compatible.
Trunk formatting.
* Heltec Tracker increase Screen update to 3Hz
Heltec Tracker increase Screen update to 3Hz from 1Hz
* Add battery level with lookup table
now uses a lookup table to better calculate battery level of different cells
* LifePo4 and PB battery table - added voltage filter
removed delay from adc reading, added a software filter to smooth out voltage readings. In those applications battery would last hours to days, no sudden change should be expected so a less frequent voltage reading or a more aggressive filtering could be done.
Note: to speed up convergence i initiliazied the last value to the minimum voltage, there are other and better ways to init the filter.
Added LiFePO4 and PB open circuit volta battery tables,
* Fixed ADC_CTRL , Checks for valid ADC readings
line 230/386 For heltec v3 and heltec tracker a different approach was used with the ADC_CTRL pin, now is more uniform using the same code for the 3 boards.
line 236 Check if the raw reading we are getting is Valid or not, count only the valid readings. This could lead to a division by 0 (improbable) so that's why at line 258 there is a check for that.
* updated OCV values
updated value to not OCV but to very low current, almost the same anyway
* Added Alkaline/Nimh voltage curve
Added Alkaline/Nimh voltage curve for AA/AAA and similar cells
* updates variants for new capacity measurement
* trunk reformatting
* trunk fmt
* Add LTO chemistry
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
* GPS rework, changes for M8 and stub for M10
* Add VALSET commands for u-blox M10 receivers
* Add VALSET commands for u-blox M10 receivers
tweak M8 commands
add comments for VALSET configuration commands
* Add commands to init M10 receivers,
tweak the M8 init sequence, this is a WIP as there are still some issues during init.
Add M10 version of PMREQ.
* Add wakeup source of uartrx to PMREQ_10
The M10 does not respond to commands when asleep,
may need to do this for the M8 as well
* Enable NMEA messages on USB port.
Normally, it is a good idea to disable messages on unused ports.
Native Linux needs to be able to use GNSS modules connected via
via either serial or USB.
In the future I2C connections may be required, but are not enabled for now.
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* StoreForward updates
- Send history in "text" variant
- Don't send history the client already got
- Check if PSRAM is full
- More sensible defaults
* Set `TEXT_BROADCAST` or `TEXT_DIRECT` RequestResponse tag
* feat: E-Ink "Dynamic Partial" (#3193)
Use a mixture of full refresh, partial refresh, and skipped updates, balancing urgency and display health.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* [create-pull-request] automated change (#3209)
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
* Reset `last_index` if history was cleared, e.g. by reboot
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <thebentern@users.noreply.github.com>
Co-authored-by: Garth Vander Houwen <garthvh@yahoo.com>
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
* GPS rework, changes for M8 and stub for M10
* Add VALSET commands for u-blox M10 receivers
* Add VALSET commands for u-blox M10 receivers
tweak M8 commands
add comments for VALSET configuration commands
* Add commands to init M10 receivers,
tweak the M8 init sequence, this is a WIP as there are still some issues during init.
Add M10 version of PMREQ.
* Add wakeup source of uartrx to PMREQ_10
The M10 does not respond to commands when asleep,
may need to do this for the M8 as well
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Fixed ESP32 ADC resolution bug introduced by #3184 as esp32 analog resolution is already set some line of code before to 12 bit default.
For our usage wouldn't be faster to use 10 bit? .
Use a mixture of full refresh, partial refresh, and skipped updates, balancing urgency and display health.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* compiling w/o e-ink display
* pinout changes
* progress getting LoRa and LCD working
* fix for bootloader, gps pins
* add canary to build matrix
* merge with main
* fix build by excluding BellModem in RadioLib
* fixes for GPS
* Fix LED_BLUE and GPS RX/TX pins
* Variant changes for merge
* make GPS baud rate configurable
* fix debug config
* Canary v1.2 changes
* Fixes for GPS
* pass trunk check
* bump protobufs to master
* update build flags to use CANARYONE enum
* use canaryone throughout for consistency.
* #define 0 is still defined
* add back .vscode/extensions.json
* bump protobufs
* revert manual change to generated file
---------
Co-authored-by: Steven Osborn <steven@lolsborn.com>
E-ink panel is DEPG0213BNS800. Otherwise, identical to v1.1 (?)
Partial refresh supported, but not implemented in this commit.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix getting channel name from MQTT topic
* Allow specifying channel index in JSON field "channel" for downlink
Still requires JSON message to be published to channel named "mqtt"
* Make non-breaking if someone adds another slash
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
* GPS rework, changes for M8 and stub for M10
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix: mark packet via MQTT as ACKed only after we sent it out via LoRa
* Don't need to check for broadcast, DMs also get implicit ACKs
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* feat(variants): Add support for TXCO on TLORA_V2_1_6 devices
* chore: remove long comment
* feat(variants): Add tlora-v2-1-1_6-tcxo to build matrix
* feat(variants): Use RADIOLIB_NC as DIO1 pin for tlora_v2_1_16 with TXCO
* Use generic naming scheme, add variant to build envs
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* Isolate esp32 adc logic gymnastics, try simplifying getBattVoltage
* Set sense resolution for pico platforms
* try silencing cppcheck when variant has no battery pin
* ADC channel for esp-idf calibration
* Missed an rp2040 device
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add debug options for RP2040
* Rename: "observed" should be plural: "observables"
* PhoneAPI: return failure on timeout
In `onNotify()`, when disconnected, PhoneAPI removed itself from the list of observers that was looped through in `notifyObservers()`. We should exit that loop in that case.
* Add Chatter 2 default_envs
* Add Chatter 2 to varients
* Add Chatter 2 specific code to esp32 platform code
* Parameterize TFT_INVERT for Chatter 2 and specify setRotation to 1
* Fix formatting to make Trunk happy
* Remove commented out #define USE_LCC68
* Fix formatting again
* Add chatter2 to the CI matrix
---------
Co-authored-by: code8buster <20384924+code8buster@users.noreply.github.com>
* fix: allow MQTT `encryption_enabled` with `json_enabled`
* fix: copy decoded MeshPacket and release memory after use
* fix: use `packetPool` allocCopy and release methods
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Mark packets received via MQTT and add option to ignore them
* Don't send packets received via MQTT back into MQTT
Generate implicit ACK for packets we as an MQTT gateway sent
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Move to Portduino's getMacAddr()
* Add ST7735/S screen support
* Push Raspbian support into native target
* Remove latent pigpio references.
* CardKB defensive programming
* Adds configurable spidev
* Fixes to build on Fedora 40
* ENUMs are not #defines. Pull latest portduino
* Add more configuration options for SPI displays
* Add config.yaml option to set DIO3_TCXO_VOLTAGE
* change tft clear() to fillScreen()
Maintains compatability with ESPI driver.
* Adds TXen and RXen pins to portduino
* Add -c --config options to specify config file
* Fail when a specified config file is unavailable
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Attempts at getting the Heltec Wireless Paper eink operational
* Bogus comment
* Fixing Support For Heltec Wireless Paper
---------
Co-authored-by: NfN Orange <orange@reveb.la>
* Portduino reboot
* separate blocks
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* WIP
* ESP8266 SAM fun
* I2S audio / ext. notification module
* Remove
* Protos
* Add use_i2s_as_buzzer from protos
* Fixes
* Stuff
* Thing
* Ext. Notification working(ish)
* Remove SAM commented code
* Trunk upgrade
* Trunk
* Fixes
* Slow not fast... :-|
* T-Deck and T-Watch don't use normal buttons
* Stop ext. notification nagging with touchscreen as well
* Add button gpio back for T-Deck, but guard against long-press during ext. notification
* Ext. notification wrap up
* Better place to guard against long-press false positives
* Adjust default gain and guard against non-i2s devices referencing audio-thread
* Simplify guard logic with a boolean
* Supress uninitMemberVar
* Protos merge got out of wack
* Trunk resolution
* Remove extra crap
* Cleanup and thread-interval
* Default to alert message buzzer and add nag timeout
* Formatting
- only works if we don't have a phone connected, but that is probably dsired
- this will send a copy of device-originating text messgaes to a connected phone. Breaking change.
- this will iterate the tophone queue by deconstructing and reconstructing it every time we look for an ID. Probably also mangles the queue oder since it aborts when a ID is found.
- Can we navigate the packet pool instead? If so, how?
- Let's keep this in draft state for now
* Fix typo in GNSS_MODEL defination and usages for the UC6580
Correct the $CFGSYS init string for the UC6580 to init the receiver for:
GPS L1 & L5 + BDS B1I & B2a + GLONASS L1 + GALILEO E1 & E5a + SBAS
* Reduce GNSS serial traffic on Helted Wireless Tracker
Turn off GSV and NOTIFY __TXT messages as neither are
necessary to Meshtastic operation.
* End wire if we find no i2c devices
* Set tx-power to 0 on nrf bluetooth shutdown
* Change polling interval of PowerFSM to 100ms instead of 10ms
* Guard 3v3
* Fix time lost on the Pico W right after NTP
Shouldn't check for `#ifdef` as it will always be defined, but might be set to 0
* Handle reconnect for Wi-Fi on RP2040
* Update arduino-core for Wi-Fi + FreeRTOS fixes
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Pico W: Initial WiFi support: connects, but freezes after a while
* Update arduino-pico core to fix hang with Wi-Fi
* Add `picow` to workflow since it's different from `pico` now
* Show Wi-Fi frame on screen for all devices with Wi-Fi
* Pico W: Disable mDNS as it's unsupported with FreeRTOS
* Fix printing IP address
* Fix Raspbian build
* Pico W: Initial WiFi support: connects, but freezes after a while
* Update arduino-pico core to fix hang with Wi-Fi
* Add `picow` to workflow since it's different from `pico` now
* Each pin individually
* Correction
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Enable IO2 toggling on RAK if the coast is clear
* Guard against monteops target which doesn't use 3V3 pin
* Also check for en_gpio = 0 to avoid re-setting the value
* Add support for the rak10701 board, no touch
* Moved tftblack fillin and changed teh src flags
* Added rak10701 to platformio.ini
* Add USB detection to RAK4631 units.
* Eliminate spurious symbol in comment field.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add configuration via /etc/meshtastic/config.yaml
* Move example config, support more locations
* Fix config check
* Use access() to check for config file presence
* Throw an error and exit on radio init fail
* Adds error check for reading Bluetooth MAC
* Settle on meshtasticd, add install script
* Shell fixes
* Fine. I'll put it back and then disable you
* Get wrekt, shellchekt
* Firat attempt at adding raspbian CI build
* Tickle the workflow
* Beatings will continue til morale improves
* Permissions are overrated
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add support for the rak10701 board, no touch
* Moved tftblack fillin and changed teh src flags
* Added rak10701 to platformio.ini
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor away some duplication
* Refactor preset names to display formatter method
* Remove unused screen brightness adjustment and extract wifi disconnect reason name to display formatter method
* Tronk
* Let's be more clear with this naming
* Effed
* DisplayFormatters static class and use native wifi disconnect reason names method
* git mv file so casing should match now
* Include titlecase
* Trunk
* Guard-clause channel util. to reduce nesting
* Try-fix PhoneAPI position not updating
* Trunk
* Missed it
* Really disable GPS when asked to
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Fix for T-Beam 1.2 GPS, with DEBUG enabled
* Don't break other devices
* Saving GPS data on this breaks on next boot. Fix.
* derp
* disable the extra verbosity
* Try the same sort of factory reset as the Lilygo image
* Catch GPS reboots and squash
* trunk
* GPS
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Populate the position log entries with data fields
includes datafields with no data as 0
* trunk check formatted.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Support for SerialModule on RP2040
* Remove one !defined too many
* Increase serial RX_BUFFER: more reliable for long packets
Even results into an error for ESP32
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix compression: encode to bytes after `decoded` is modified
* Change payload size to decompressed length
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor GPS to not probe if pins not defined
* Use Named Constructor to clean up code
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
* Cleanup and remove dead code
* Rename GPS_PIN_WAKE to GPS_PIN_STANDBY
* Actually put GPS to sleep between fixes
* add GPS_POWER_TOGGLE for heltec-tracker and t-deck
* Change GPS_THREAD_INTERVAL to 200 ms
* More dead code, compiler warnings, and add returns
* Add Number of sats to log output
* Add pgs enable and triple-click config
* Track average GPS fix time to judge low-power time
* Feed PositionModule on GPS fix
* Don't turn off the 3v3_s line on RAK4631
when the rotary is present.
* Add GPS power standbyOnly option
* Delay setting time currentQuality
to avoid strange log message.
* Typos, comments, and remove unused variable
* Short-circuit the setAwake logic on GPS disable
* heltec-tracker 0.3 GPS power saving
* set en_gpio to defined state
* Fix fixed_position logic with GPS disabled
* Don't process GPS serial when not isAwake
* Add quirk for Heltec Tracker GPS powersave
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* Use UINT32_MAX to indicate no configured GPS
* Refactor GPS to not probe if pins not defined
* Minor cleanups related to rework
* Use Named Constructor to clean up code
* Actually disable the GPS thread
* Don't actually disable the GPS thread
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update variant.h
Add second i2c channel on external connector for Station G1
* Create trunk-check.yml
* Fix typo in logging
Corrected typo in pb_msgdesc logging for packets failing to be decoded.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* First attempt at lazy config of GPS
* More GPS rework
Break GPS init into smaller, interruptable steps
Move more GPS commands into ubx.h
Combine Setup functions
* Move the rest of UBX messages to ubs.h
* support BB Q10 keyboard
* remove debug code
* fix wrong logic
* fix left/right keys for cardkb
* Try to enable Q10 kb after all
* cppcheck
* Only fire on Key release and assume 0x0a is a enter as well
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Add interested portnums to TextMessageModule
* Send Detection Sensor Module messages on its own portnum
* Add to Ext. Notification and consolidate logic
* RANGE_TEST_APP portnum for RangeTestModule
* WIP
* Updates
* Move it out of the macro guard so portduino can build
* Changes from feedback
* Use minimum_broadcast_secs as interval if we just broadcasted to avoid wasting cpu cycles
* Fmt
* Merge conflict resolution boogered me up
* Missed a spot
* getConfiguredOrDefaultMs
* Get the minimum interval
* - Permanently Enable Canned Messages on T-Deck and Picomputer
- picomputer has a really dark TFT; switch color to white for better UX.
* well, you know... bullock...
* WIP
* Updates
* Move it out of the macro guard so portduino can build
* Changes from feedback
* Use minimum_broadcast_secs as interval if we just broadcasted to avoid wasting cpu cycles
* Fmt
* Merge conflict resolution boogered me up
* Missed a spot
* Extend node max to 100 and remove mesh_sds_timeout_secs
* Const pointers for you and you and you
* Fixes and supressions
* Missed it
* uint
* Resize
* Derp
* try-fix: nodenum crash during boot
* Revert "try-fix: nodenum crash during boot"
This reverts commit 632012e197.
* try-fix: max nodes crash during boot
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* T-Watch WIP
* Updates
* Temp
* Update screen spi bus and and backlight en
* Peripherals progress
* Fixes
* Fixes
* Updates
* DRV scaffolding
* Fixed touch-screen driver selection. WIP on DRV haptic feedback
* DRV2605 pmu channel
* Trunk
* Fixes and defaults
* Dropped an s
* Move PMU and turn off screen that way
* Add t-deck and t-watch-s3 to CI and cleanup
* More cleanup
* add hwid for auto-detection
* fix: heltec-wireless-tracker USB serial
* T-Deck support
* trunk fmt
* set FRAMERATE to 1
* fix some defines
* trunk fmt
* corrected vendor link
* Move module info for use in functions outside of probe, refmt MON-VER message
* use checksum function in probe message
* Housekeeping on some comments, unsign the position ctr again
* WIP
* Comment
* WIP
* TFT_CTRL
* Update platformio.ini
update to current latest version available
* Update EInkDisplay2.cpp
Is the e-ink Display a DEPG0213BN ?
* Logging
* trunk fmt
---------
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
* Make input_source case insensitive
* Implement reboot for RP2040
* Remove EXT_NOTFIFY_OUT as it conflicts with I2C and module is not supported
* RP2040 has screen, button and wire
* Add default I2C pins also for Pico W
* Initial support for MonteOps's fixed hardware platform
* Update platformio env config + cleanup
* Fix platformio build
* Fix platformio build
* Fix wrong definition logic for NCP5623
* Fix another wrong definition logic for NCP5623, it's not board feature
* Fix wrong definition logic for NCP5623 in External Notification code, it's not board feature
* We need for CI magic here
* Another fix related to NCP5623
* Fix cosmetic issue with redifined variable
* Fix typo
* Cleanup and update defs for HW1
* Fix OEM RAK4631
* Fix AQ sensor reading
* Fix AQ sensor reading (better variant)
* Fix build for other nRF52 devices
* Replace HAS_EINK_RAK to RAK_4631
* Always assign NodeNum based on MAC address
Step one of trying to fix infinite loop
* Store our mac.addr again to ignore an already existing NodeNum if it's us
With static ethernet config, `status` stayed `0` which let the function return
without setting `ethEvent`. Therefore, `reconnectETH` was never called and network services were never started.
Also, the RAK4631 uses little endian, which is why the IP addresses need to be
converted before setting them.
Fixes#2543
* WIP
* Continued wip
* We got em
* Voltage sensor base class
* INA voltage
* Log it
* Stacie's mom has got it going on
* Move declaration up
* Last one
* Sneaky little bugger
* Macro guard to avoid calling methods
* Make portduino great again
* Upon receiving packet that was seen recently, cancel a rebroadcast if there was one in Tx queue already
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* LittleFS compiles. Can't check with actual device.
* make cppcheck happy again
* Guard against accelerometer thread
* Missed a spot
* Upload via ST-LINK
* Derive MAC address from UID
* upload port
* Trunk it
* Guard it
* Maybe fix the cache error on startup.
* Latest RadioLib ref to fix SubGHZ
* revert nasty Sub-GHz Hack
* Boots and radio inits with RadioLib 6.0, LittleFS doesn't seem to work
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
* Implement override_console_serial_port
* It's opposite day in Logictown
* Try to use native serial types for platforms
* Fix for s3
* Trunk
* Screw it... just declare as Print and handle init
* Alright, chatty kathy
* Missed a spot
* I'll take "Kill that FIXME" for 800, Alex
* Badunkadunk
* Refactor out a lot of duplicated code
* Boogers
* Okay I probably should stop changing everything
* POC. Board definition JSON upcoming. Generic for now
* side-effect: RP2040 is building again.
* WIP Pico Targets
* current state of affairs
* ahem
* POC. Board definition JSON upcoming. Generic for now
* side-effect: RP2040 is building again.
* WIP Pico Targets
* current state of affairs
* ahem
* fmt
* update toolkit and fmt
* Add built in LED pin
* Use arduino pins
* init SPI bus on right pins.
* Use SPI1 and control chip select manually
* Use macro define for SPI selection. This needs to be defined in the ini file since portduino needs it inside the framework source
* Remove manual CS; works when not using setCS()
* Remove whoopsie debug line
* we are not ARDUINO_AVR_NANO_EVERY any more
* fix rp2040 compilation
* fix RadioLibHAL
* Use new arduino-pico core
* Use cortex-m0plus for BSEC2 library
* Forgot RAK11310 target for BSEC2 library
* That branch was merged
* RAK11310 is working too
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
- fix wrong debug print
- change shutdown logic for t-beam if PMU is detected
- wait for 10 seconds instead of 5 for shutdown and resurrect screen brightness adjust for @karamo
* Testing TLS MQTT Support
* Working TLS connections
* Testing TLS MQTT Support
* Working TLS connections
* Added protobuf support for mqtt.tls_enabled
* fix 'em up good
* don't commit this stuff, jeeez
* there i fixed it
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* For Garth
* Push it real good
* Wut
* Double tap
* Move disable logic
* Actually return
* Reinitialize setClick in thread body
* Initialize later so that we actually have nodedb on init
* Fixes
* send ourNodeInfo to channel we got a message we heared someone new
* store node-channel into nodeDB
* use channel from nodeDb to send local messages
* update protobufs
* fmt and fix braces
* respect requested channel for local send, only store channel while getting a nodeinfo packet
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
